VS-MBRS130-M3
www.vishay.com
Vishay Semiconductors
High Performance Schottky Rectifier, 1.0 A
FEATURES
• Small foot print, surface mountable
• Very low forward voltage drop
Cathode
Anode
• High frequency operation
• Guard ring for enhanced ruggedness and long
term reliability
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
SMB (DO-214AA)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
DESCRIPTION / APPLICATIONS
VR
30 V
VF at IF
0.420 V
IRM max.
15 mA at 125 °C
TJ max.
150 °C
The VS-MBRS130-M3 surface mount Schottky rectifier has
been designed for applications requiring low forward drop
and small foot prints on PC boards. Typical applications are
in disk drives, switching power supplies, converters,
freewheeling diodes, battery charging, and reverse battery
protection.
EAS
3.0 mJ
Package
SMB (DO-214AA)
Circuit configuration
Single
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IF(AV)
CHARACTERISTICS
VALUES
UNITS
1.0
A
Rectangular waveform
VRRM
IFSM
tp = 5 μs sine
VF
1.0 Apk, TJ = 125 °C
TJ
Range
30
V
230
A
0.30
V
-55 to +125
°C
VS-MBRS130-M3
UNITS
30
V
VOLTAGE RATINGS
PARAMETER
SYMBOL
Maximum DC reverse voltage
VR
Maximum working peak reverse voltage
VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum average forward current
IF(AV)
Maximum peak one cycle
non-repetitive surge current, see fig. 6
IFSM
Non-repetitive avalanche energy
EAS
TJ = 25 °C, IAS = 1 A, L = 6 mH
3.0
mJ
IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical
1.0
A
Repetitive avalanche current
50 % duty cycle at TL = 106 °C, rectangular waveform
1.0
5 μs sine or 3 μs rect. pulse
230
10 ms sine or 6 ms rect. pulse
Following any rated
load condition and with
rated VRRM applied
A
50
Revision: 30-Jul-2021
Document Number: 95746
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-MBRS130-M3
www.vishay.com
Vishay Semiconductors
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
1A
Maximum forward voltage drop
VFM (1)
TJ = 25 °C
2A
1A
TJ = 125 °C
2A
TJ = 25 °C
Maximum reverse leakage current
IRM (1)
VALUES
UNITS
0.420
0.470
V
0.300
0.370
0.5
TJ = 100 °C
VR = Rated VR
mA
5.0
TJ = 125 °C
15
Maximum junction capacitance
CT
VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C
200
pF
Typical series inductance
LS
Measured lead to lead 5 mm from package body
2.0
nH
10 000
V/μs
VALUES
UNITS
Maximum voltage rate of change
dV/dt
Rated VR
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum junction temperature range
TJ (1)
-55 to +125
Maximum storage temperature range
TStg
-55 to +150
Maximum thermal resistance,
junction to lead
RthJL (2)
Maximum thermal resistance,
junction to ambient
RthJA
25
DC operation
°C/W
80
Approximate weight
Marking device
°C
Case style SMB (DO-214AA)
0.10
g
0.003
oz.
13
Notes
(1)
(2)
dP tot
1
------------- < -------------- thermal runaway condition for a diode on its own heatsink
dT J R thJA
Mounted 1" square PCB
Revision: 30-Jul-2021
Document Number: 95746
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-MBRS130-M3
Vishay Semiconductors
130
10
Allowable Lead Temperature (°C)
IF - Instantaneous Forward Current (A)
www.vishay.com
TJ = 125 °C
TJ = 25 °C
1
0.1
110
100
90
Square wave (D = 0.50)
Rated VR applied
80
See note (1)
70
0
0.2
0.4
0.6
0.8
0
0.4
0.6
0.8
1.0
1.2
1.4
1.6
IF(AV) - Average Forward Current (A)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 4 - Maximum Average Forward Current vs.
Allowable Lead Temperature
0.5
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
Average Power Loss (W)
TJ = 125 °C
IR - Reverse Current (mA)
0.2
VFM - Forward Voltage Drop (V)
10
TJ = 100 °C
1
TJ = 75 °C
0.1
TJ = 50 °C
0.01
TJ = 25 °C
0.001
0.4
0.3
DC
0.2
RMS limit
0.1
0
0.0001
0
10
20
0
30
0.4
0.8
1.6
1.2
IF(AV) - Average Forward Current (A)
Fig. 2 - Typical Peak Reverse Current vs. Reverse Voltage
Fig. 5 - Maximum Average Forward Dissipation vs.
Average Forward Current
TJ = 25 °C
100
10
0
10
20
30
IFSM - Non-Repetitive Surge Current (A)
VR - Reverse Voltage (V)
1000
CT - Junction Capacitance (pF)
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
DC
120
1000
100
At any rated load condition
and with rated VRRM applied
following surge
10
10
100
1000
10 000
VR - Reverse Voltage (V)
tp - Square Wave Pulse Duration (µs)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
Fig. 6 - Maximum Peak Surge Forward Current vs.Pulse Duration
Note
(1) Formula used: T = T - (Pd + Pd
C
J
REV) x RthJC;
Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
Revision: 30-Jul-2021
Document Number: 95746
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-MBRS130-M3
www.vishay.com
Vishay Semiconductors
ORDERING INFORMATION TABLE
Device code
VS- MBR
1
2
S
1
30
-M3
3
4
5
6
1
-
Vishay Semiconductors product
2
-
Schottky MBR series
3
-
S = SMB package
4
-
Current rating (1 = 1 A)
5
-
Voltage rating (30 = 30 V)
6
-
-M3 = halogen-free, RoHS-compliant, and termination lead (Pb)-free
ORDERING INFORMATION (Example)
PREFERRED P/N
PREFERRED PACKAGE CODE
MINIMUM ORDER QUANTITY
PACKAGING DESCRIPTION
5BT
3200
13" diameter plastic tape and reel
VS-MBRS130-M3/5BT
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95401
Part marking information
www.vishay.com/doc?95403
Packaging information
www.vishay.com/doc?95404
Revision: 30-Jul-2021
Document Number: 95746
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
Vishay Semiconductors
SMB
DIMENSIONS in inches (millimeters)
DO-214AA (SMB)
Cathode band
Mounting Pad Layout
0.085 (2.159) MAX.
0.155 (3.94)
0.130 (3.30)
0.086 (2.20)
0.077 (1.95)
0.086 (2.18) MIN.
0.180 (4.57)
0.160 (4.06)
0.060 (1.52) MIN.
0.012 (0.305)
0.006 (0.152)
0.220 (5.59) REF.
0.096 (2.44)
0.084 (2.13)
0.060 (1.52)
0.030 (0.76)
0.008 (0.2)
0 (0)
0.220 (5.59)
0.205 (5.21)
Document Number: 95401
Revision: 09-Jul-10
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
