VS-VSKCS209/150
www.vishay.com
Vishay Semiconductors
AAP Gen 7 (TO-240AA)
Power Modules Schottky Rectifier, 200 A
FEATURES
• 175 °C TJ operation
• Low forward voltage drop
• High frequency operation
• Low thermal resistance
• UL approved file E78996
• Designed and qualified for industrial level
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
AAP Gen 7 (TO-240AA)
BENEFITS
• Excellent thermal performances obtained by the usage of
exposed direct bonded copper substrate
PRIMARY CHARACTERISTICS
• High surge capability
IF(AV)
200 A
VR
150 V
Package
AAP Gen 7 (TO-240AA)
Circuit configuration
Two diodes common cathode
• Easy mounting on heatsink
MECHANICAL DESCRIPTION
The AAP Gen 7, new generation of ADD-A-PAK module,
combines the excellent thermal performances obtained by
the usage of exposed direct bonded copper substrate, with
advanced compact simple package solution and simplified
internal structure with minimized number of interfaces.
ELECTRICAL DESCRIPTION / APPLICATIONS
The VS-VSKCS209.. Schottky rectifier common cathode
has been optimized for low reverse leakage at high
temperature. The proprietary barrier technology allows for
reliable operation up to 175 °C junction temperature.
Typical applications are in high current switching power
supplies, plating power supplies, UPS systems, converters,
freewheeling diodes, welding, and reverse battery
protection.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IF(AV)
CHARACTERISTICS
Rectangular waveform
VRRM
IFSM
tp = 5 μs sine
VF
100 Apk, TJ = 125 °C
TJ
Range
VALUES
UNITS
200
A
150
V
11 300
A
0.85
V
-55 to +175
°C
VS-VSKCS209/150
UNITS
150
V
VOLTAGE RATINGS
PARAMETER
Maximum DC reverse voltage
Maximum working peak reverse voltage
SYMBOL
VR
VRWM
Revision: 03-May-17
Document Number: 93229
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-VSKCS209/150
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Maximum average
forward current
per module
per leg
SYMBOL
TEST CONDITIONS
IF(AV)
50 % duty cycle at TC = 113 °C, rectangular waveform
5 μs sine or 3 μs rect. pulse
Following any rated
load condition and with
rated VRRM applied
VALUES
UNITS
200
100
11 300
A
Maximum peak one cycle
non-repetitive surge current
IFSM
Non-repetitive avalanche energy
EAS
TJ = 25 °C, IAS = 1.8 A, L = 10 mH
15
mJ
IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical
1
A
SYMBOL
TEST CONDITIONS
VALUES
UNITS
10 ms sine or 6 ms rect. pulse
Repetitive avalanche current
1600
ELECTRICAL SPECIFICATIONS
PARAMETER
100 A
Maximum forward voltage drop
VFM
200 A
100 A
200 A
TJ = 25 °C
TJ = 25 °C
TJ = 125 °C
VR = Rated VR
Maximum reverse leakage current
IRM
Maximum junction capacitance
CT
VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C
Typical series inductance
LS
Measured lead to lead 5 mm from package body
Maximum voltage rate of change
dV/dt
Maximum RMS insulation voltage
VINS
TJ = 125 °C
Rated VR
50 Hz
1.01
1.35
0.85
V
1.13
6
85
mA
3000
pF
7.0
nH
10 000
V/μs
3000 (1 min)
3600 (1 s)
V
VALUES
UNITS
-55 to +175
°C
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage
temperature range
TEST CONDITIONS
TJ, TStg
Maximum thermal resistance,
junction to case per leg
RthJC
Typical thermal resistance,
case to heatsink per module
RthCS
DC operation
°C/W
0.1
Approximate weight
to heatsink
Mounting torque ± 10 %
busbar
Case style
0.52
A mounting compound is recommended and the torque
should be rechecked after a period of 3 hours to allow for
the spread of the compound.
JEDEC®
75
g
2.7
oz.
4
Nm
3
TO-240AA compatible
Revision: 03-May-17
Document Number: 93229
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-VSKCS209/150
Vishay Semiconductors
1000
1000
TJ = 175 °C
IR - Reverse Current (mA)
IF - Instantaneous Forward Current (A)
www.vishay.com
100
TJ = 175 °C
TJ = 125 °C
TJ = 25 °C
10
100
10
TJ = 125 °C
1
0.1
0.01
TJ = 25 °C
0.001
1
0
0.5
1.0
1.5
2.0
0
2.5
10
20
30
40
50
60
70
80
90 100
VFM - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage
CT - Junction Capacitance (pF)
10 000
TJ = 25 °C
1000
100
0
30
60
90
120
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
1
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
DC
0.1
0.01
0.00001
0.0001
0.001
0.01
0.1
1
10
100
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Revision: 03-May-17
Document Number: 93229
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-VSKCS209/150
Vishay Semiconductors
180
140
160
140
120
DC
100
80
60
40
Square wave (D = 0.50)
Rated VR applied
20
See note (1)
RMS limit
120
Average Power Loss (W)
Allowable Case Temperature (°C)
www.vishay.com
100
80
30°
60°
90°
120°
180°
DC
60
40
20
0
0
0
50
100
150
200
250
0
300
30
60
90
120
150
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current
Fig. 6 - Forward Power Loss Characteristics
IFSM - Non-Repetitive Surge Current (A)
IF(AV) - Average Forward Current (A)
100 000
10 000
1000
At any rated load condition
and with rated VRRM applied
following surge
100
10
100
1000
10 000
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Non-Repetitive Surge Current
L
D.U.T.
IRFP460
Rg = 25 Ω
Current
monitor
High-speed
switch
Freewheel
diode
+ Vd = 25 V
40HFL40S02
Fig. 8 - Unclamped Inductive Test Circuit
Note
(1) Formula used: T = T - (Pd + Pd
C
J
REV) x RthJC;
Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
Revision: 03-May-17
Document Number: 93229
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-VSKCS209/150
www.vishay.com
Vishay Semiconductors
ORDERING INFORMATION TABLE
Device code
VS-VS KC
1
2
S
20
9
3
4
5
/
150
6
1
-
VS-VS = Vishay Semiconductors product
2
-
Circuit configuration:
KC = ADD-A-PAK - 2 diodes common cathode
3
-
S = Schottky diode
4
-
Average current rating (20 = 200 A)
5
-
Product silicon identification
6
-
Voltage rating (150 = 150 V)
CIRCUIT CONFIGURATION
(1)
+
(2)
-
(3)
-
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95369
Revision: 03-May-17
Document Number: 93229
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000
