VS-VSKJS409/150

VS-VSKJS409/150 www.vishay.com Vishay Semiconductors AAP Gen 7 (TO-240AA) Power Modules Schottky Rectifier, 400 A FEATURES • 175 °C TJ operation • Low forward voltage drop • High frequency operation • Low thermal resistance • UL approved file E78996 • Designed and qualified for industrial level • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 AAP Gen 7 (TO-240AA) BENEFITS • Excellent thermal performances obtained by the usage of exposed direct bonded copper substrate PRIMARY CHARACTERISTICS IF(AV) 400 A • High surge capability VR 150 V • Easy mounting on heatsink Package AAP Gen 7 (TO-240AA) Circuit configuration Two diodes common anode MECHANICAL DESCRIPTION The AAP Gen 7, new generation of ADD-A-PAK module, combines the excellent thermal performances obtained by the usage of exposed direct bonded copper substrate, with advanced compact simple package solution and simplified internal structure with minimized number of interfaces. ELECTRICAL DESCRIPTION / APPLICATIONS The VS-VSKJS409/150 Schottky rectifier common anode has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature.  Typical applications are in high current switching power supplies, plating power supplies, UPS systems, converters, freewheeling diodes, welding, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS Rectangular waveform VRRM IFSM tp = 5 μs sine VF 200 Apk, TJ = 125 °C TJ Range VALUES UNITS 400 A 150 V 20 000 A 0.85 V -55 to +175 °C VS-VSKJS409/150 UNITS 150 V VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM Revision: 03-May-17 Document Number: 93106 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKJS409/150 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current per module per leg SYMBOL TEST CONDITIONS IF(AV) 50 % duty cycle at TC = 105 °C, rectangular waveform 5 μs sine or 3 μs rect. pulse Following any rated load condition and with rated VRRM applied VALUES UNITS 400 200 20 000 A Maximum peak one cycle non-repetitive surge current IFSM Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 1.8 A, L = 10 mH 15 mJ Repetitive avalanche current IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 1 A SYMBOL TEST CONDITIONS VALUES UNITS 10 ms sine or 6 ms rect. pulse 2300 ELECTRICAL SPECIFICATIONS PARAMETER 200 A Maximum forward voltage drop VFM 400 A 200 A 400 A Maximum reverse leakage current IRM Maximum junction capacitance CT Typical series inductance LS Maximum voltage rate of change dV/dt Maximum RMS insulation voltage VINS TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C VR = Rated VR VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C Measured lead to lead 5 mm from package body Rated VR 50 Hz 1.03 1.33 0.85 V 1.13 6 85 6000 mA pF 5.0 nH 10 000 V/μs 3000 (1 min) 3600 (1 s) V VALUES UNITS -55 to 175 °C THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage  temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance,  junction to case per leg RthJC Typical thermal resistance,  case to heatsink per module RthCS DC operation °C/W 0.1 Approximate weight to heatsink Mounting torque ± 10 % busbar Case style 0.32 A mounting compound is recommended and the torque should be rechecked after a period of 3 h to allow for the spread of the compound. JEDEC® 75 g 2.7 oz. 4 Nm 3 TO-240AA compatible Revision: 03-May-17 Document Number: 93106 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKJS409/150 Vishay Semiconductors 1000 1000 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) www.vishay.com 100 TJ = 175 °C TJ = 125 °C TJ = 25 °C 10 1 0.0 100 TJ = 150 °C 10 TJ = 125 °C TJ = 100 °C 1 TJ = 75 °C 0.1 TJ = 50 °C 0.01 TJ = 25 °C 0.001 0.5 1.0 1.5 2.0 0 VFM - Forward Voltage Drop (V) 93106_01 TJ = 175 °C 50 75 100 125 150 VR - Reverse Voltage (V) 93106_02 Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) 25 Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 10 000 TJ = 25 °C 1000 100 0 93106_03 20 40 60 80 100 120 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 1 0.1 0.01 0.001 0.0001 93106_04 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single pulse (thermal resistance) 0.001 0.01 0.1 1 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Diode) Revision: 03-May-17 Document Number: 93106 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKJS409/150 Vishay Semiconductors 180 300 160 Average Power Loss (W) Allowable Case Temperature (°C) www.vishay.com 140 DC 120 100 80 60 Square wave (D = 0.50) 80 % rated VR applied 40 20 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 200 150 RMS limit 100 DC 50 See note (1) 0 0 0 93106_05 250 100 200 300 400 0 500 IF(AV) - Average Forward Current (A) 93106_06 IFSM - Non-Repetitive Surge Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) 50 100 150 200 250 300 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 100 000 At any rated load condition and with rated VRRM applied following surge 10 000 1000 93106_07 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current L D.U.T. IRFP460 Rg = 25 Ω Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR Revision: 03-May-17 Document Number: 93106 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKJS409/150 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS-VS KJ 1 2 S 40 9 3 4 5 / 150 6 1 - Vishay Semiconductors product 2 - Circuit configuration: 3 - S = Schottky diode 4 - Average current rating (40 = 400 A) 5 - Product silicon identification 6 - Voltage rating (150 = 150 V) KJ = ADD-A-PAK - 2 diodes common anode CIRCUIT CONFIGURATION (1) - (2) + (3) + LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95369 Revision: 03-May-17 Document Number: 93106 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors ADD-A-PAK Generation VII - Diode DIMENSIONS in millimeters (inches) 29 ± 0.5 (1 ± 0.020) 30 ± 0.5 (1.18 ± 0.020) 35 REF. 18 (0.7) REF. 24 ± 0.5 (1 ± 0.020) 6.7 ± 0.3 (0.26 ± 0.012) Viti M5 x 0.8 Screws M5 x 0.8 Document Number: 95369 Revision: 11-Nov-08 7 6 4 5 3 2 1 6.3 ± 0.2 (0.248 ± 0.008) 22.6 ± 0.2 (0.89 ± 0.008) 80 ± 0.3 (3.15 ± 0.012) 15 ± 0.5 (0.59 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 92 ± 0.75 (3.6 ± 0.030) For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000