VSB3200-M3/54

VSB2045Y-M3 www.vishay.com Vishay General Semiconductor Photovoltaic Solar Cell Protection Schottky Rectifier Ultra Low VF = 0.30 V at IF = 5.0 A FEATURES • Trench MOS Schottky technology TMBS ® • Low forward voltage drop, low power losses • High efficiency operation • High forward surge capability • ESD capability P600 • High junction temperature 230 °C maximum at DC forward current • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS IF(AV) 20 A VRRM 45 V IFSM 250 A VF at IF = 20 A 0.42 V TOP max. (AC mode) 150 °C TJ max. (DC forward current) 230 °C Package P600 Diode variation Single die TYPICAL APPLICATIONS For use in solar cell junction box as a bypass diode for protection, using DC forward current without reverse bias. MECHANICAL DATA Case: P600 Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test per Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage VSB2045Y UNIT V2045Y VRRM 45 IF(DC) (1) 20 IF(DC) (2) 6.5 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 250 A Operating junction temperature range TOP -40 to +150 °C Storage temperature range TSTG -40 to +175 °C Junction temperature in DC forward current without reverse bias, t  1 h TJ (1)  230 °C Maximum average forward rectified current (fig. 1) V A Notes (1) With heatsink (2) Without heatsink, free air Revision: 04-Dec-13 Document Number: 89960 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSB2045Y-M3 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL IF = 5.0 A IF = 10 A TA = 25 °C IF = 20 A Instantaneous forward voltage VF (1) IF = 5.0 A IF = 10 A TA = 125 °C IF = 20 A Reverse current VR = 45 V Typical junction capacitance 4.0 V, 1 MHz TA = 25 °C TA = 125 °C IR (2) CJ TYP. MAX. 0.44 - 0.46 - 0.50 0.58 0.30 - UNIT V 0.35 - 0.42 0.50 23.4 1200 μA 11.9 35 mA 2050 - pF Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: 40 ms pulse width THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VSB2045Y RJA (1) 55 RJL (1) 3.5 RJL (2) 2.5 Thermal resistance Typical thermal resistance UNIT °C/W °C/W Notes Without heatsink, free air; units mounted on PCB with 2 mm x 2 mm copper pad areas at 9.5 mm lead length Leads clipped at 3 mm lead length from plastic body on 7.0 cm x 2.2 cm x 1.9 cm x 2 heatsink (1) (2) IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS (TA = 25 °C unless otherwise noted) STANDARD TEST TYPE TEST CONDITIONS Human body model (contact mode) C = 150 pF, R = 1.5  JESD22-A115 Machine model (contact mode) C = 200 pF, R = 0  IEC 61000-4-2 (2) Human body model (air discharge mode) (1) C = 150 pF, R = 330  JESD22-A114 SYMBOL VC CLASS VALUE 3B > 8 kV C > 400 V 4 > 15 kV Notes Immunity to IEC 61000-4-2 air discharge mode has a typical performance > 25 kV (2) System ESD standard (1) ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE VSB2045Y-M3/54 1.88 54 800 13" diameter paper tape and reel VSB2045Y-M3/73 1.88 73 300 Ammo pack packaging Revision: 04-Dec-13 Document Number: 89960 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSB2045Y-M3 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Instantaneous Forward Current (A) 24 With Heatsink DC Forward Current (A) 20 16 12 8 Free Air, without Heatsink 4 0 TA = 150 °C 10 1 TA = 25 °C 0.1 25 0 50 75 100 125 150 175 200 225 250 0 Ambient Temperature (°C) 0.1 0.2 0.3 0.4 0.5 0.7 Fig. 4 - Typical Instantaneous Forward Characteristics 100 000 Instantaneous Reverse Current (µA) 230 RthJL = 2.5 °C/W 220 210 RthJL = 3.5 °C/W 200 190 Infinite Heatsink Minimum Pad Area on PCB, airflow TA = 150 °C TA = 125 °C 10 000 TA = 100 °C 1000 100 10 TA = 25 °C 1 180 12 14 16 18 20 20 DC Forward Current (A) 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 2 - Rated Forward Current vs. Ambient Temperature Fig. 5 - Typical Reverse Leakage Characteristics 230 10 000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Junction Capacitance (pF) 220 Junction Temperature (°C) 0.6 Instantaneous Forward Voltage (V) Fig. 1 - Forward Current Derating Curve Lead Temperature (°C) TA = 100 °C TA = 125 °C 210 200 190 180 170 160 150 0 5 10 15 20 25 30 35 40 45 Reverse Voltage (V) Fig. 3 - Forward Power Loss Characteristics Revision: 04-Dec-13 1000 100 0.1 1 10 100 Reverse Voltage (V) Fig. 6 - Typical Junction Capacitance Document Number: 89960 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSB2045Y-M3 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) P600 1.0 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) 0.360 (9.1) 0.340 (8.6) 0.052 (1.32) 0.048 (1.22) DIA. Revision: 04-Dec-13 1.0 (25.4) MIN. Document Number: 89960 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000