VSMY98145DS

VSMY98145DS www.vishay.com Vishay Semiconductors High Power Infrared Emitting Diode, 810 nm, Surface Emitter Technology FEATURES • • • • • • • • • • DESCRIPTION As part of the SurfLightTM portfolio, the VSMY98145DS is an infrared, 810 nm emitting diode based on surface emitter technology with high radiant power and high speed, molded in low thermal resistance SMD package with lens. A 42 mil chip provides outstanding radiant intensity and allows DC operation of the device up to 1 A. Superior ESD characteristics are ensured by an integrated Zener diode. • • • • Package type: surface mount Double stack technology Package form: high power QFN with lens Dimensions (L x W x H in mm): 3.85 x 3.85 x 2.24 Peak wavelength: λp = 810 nm Zener diode for ESD protection up to 2 kV High radiant power High radiant intensity Angle of half intensity: ϕ = ± 45° Designed for high drive currents: up to 1 A (DC) and up to 5 A pulses Low thermal resistance: RthJA = 10 K/W Floor life: 168 h, MSL 3, according to J-STD-020 Lead (Pb)-free reflow soldering Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Infrared illumination for CMOS cameras (CCTV) • Iris scan • Machine vision PRODUCT SUMMARY COMPONENT Ie (mW/sr) ϕ (deg) λp (nm) tr (ns) VSMY98145DS 500 ± 45 810 30 Note • Test conditions see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM VSMY98145DS Tape and reel MOQ: 600 pcs, 600 pcs/reel High power with lens Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER SYMBOL VALUE Reverse voltage VR 5 V Forward current IF 1 A Surge forward current TEST CONDITION tp = 10 μs Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction / pin Rev. 1.1, 27-Jan-2022 UNIT IFSM 5 A PV 3.8 W Tj 115 °C Tamb -40 to +85 °C °C Tstg -55 to +100 According to fig. 7, J-STD-20 Tsd 260 °C JESD51 RthJP 10 K/W Document Number: 84368 1 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY98145DS www.vishay.com Vishay Semiconductors 4.0 1.0 IF - Forward Current (A) PV - Power Dissipation (W) 3.5 3.0 RthJA = 10 K/W 2.5 2.0 1.5 1.0 0.8 RthJA = 10 K/W 0.6 0.4 0.2 0.5 0 0 0 20 40 60 80 100 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Tamb - Ambient Temperature (°C) Fig. 1 - Power Dissipation Limit vs. Ambient Temperature Fig. 2 - Forward Current Limit vs. Ambient Temperature BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 1 A, tp = 100 μs VF - 3.3 3.8 V IF = 2 A, tp = 100 μs VF - 3.5 - V VR = 5 V IR - - 10 μA IF = 1 A, tp = 100 μs Ie 350 500 - mW/sr IF = 2 A, tp = 100 μs Ie - 950 - mW/sr IF = 1 A, tp = 20 ms φe - 1000 - mW ϕ - ± 45 - deg Peak wavelength IF = 1 A λp - 810 - nm Spectral bandwidth IF = 1 A Δλ - 50 - nm Rise time IF = 1 A tr - 30 - ns Fall time IF = 1 A tf - 30 - ns Forward voltage Reverse current Radiant intensity Radiant power Angle of half intensity BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1000 Ie - Radiant Intensity (mW/sr) IF - Forward Current (A) 10 tp = 100 μs 1 0.1 tp = 100 μs 100 10 2.0 3.0 4.0 VF - Forward Voltage (V) Fig. 3 - Forward Current vs. Forward Voltage Rev. 1.1, 27-Jan-2022 100 1000 IF - Forward Current (mA) Fig. 4 - Radiant Intensity vs. Forward Current Document Number: 84368 2 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY98145DS www.vishay.com Vishay Semiconductors 10° 20° IF = 1.0 A 90 80 70 60 50 40 30 20 10 0 700 750 800 850 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 900 80° 0.6 0.4 0.2 ϕ - Angular Displacement Ie, rel - Relative Radiant Intensity Ie, rel - Relative Radiant Intensity (%) 0° 100 0 λ - Wavelength (nm) Fig. 5 - Relative Radiant Intensity vs. Wavelength Fig. 6 - Relative Radiant Intensity vs. Angular Displacement TAPING DIMENSIONS in millimeters Ø 60.0 ± 1.0 (2.36 ± 0.039) Ø 178 ± 2.0 (7.0 ± 0.08) Ø 13.0 (0.512) typ. 14.40 (0.57) typ. Notes • Empty component pockets sealed with top cover tape. • 7 inch reel - 600 pieces per reel. • The maximum number of consecutive missing lamps is two. • In accordance with ANSI / EIA 481-1-A-1994 specifications. 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 Cathode Ø 1.50 + 0.10 1.75 ± 0.10 12.00 +- 0.30 0.10 5.50 ± 0.05 Ø 1.50 + 0.25 Rev. 1.1, 27-Jan-2022 Document Number: 84368 3 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY98145DS www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 1.90 Cathode 3.85 ± 0.1 .76 2.70 Ø2 Anode 1.00 3.85 ± 0.1 2.80 8 .3 R0 2.24 ± 0.1 0.15 ± 0.05 0.40 ± 0.05 R1 .1 5 Notes • Tolerance is ± 0.10 mm (0.004") unless otherwise noted. • Specifications are subject to change without notice. 1.0 2.8 0.5 2.8 Rev. 1.1, 27-Jan-2022 Document Number: 84368 4 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY98145DS www.vishay.com Vishay Semiconductors SOLDER PROFILE DRYPACK Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. Temperature 10 s max. 217 °C 200 °C 255 °C to 260 °C 3 °C/s max. Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: 6 °C/s max. 150 °C Floor life: 168 h Conditions: Tamb < 30 °C, RH < 60 % 3 °C/s max. 60 s to 120 s Moisture sensitivity level 3, according to J-STD-020B 60 s max. Time Fig. 7 - Lead (Pb)-free Reflow Solder Profile According to J-STD-020 Rev. 1.1, 27-Jan-2022 FLOOR LIFE DRYING In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or label. Devices taped on reel dry using recommended conditions 192 h at 40 °C (+ 5 °C), RH < 5 %. Document Number: 84368 5 For technical questions, contact: emittertechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000