VSS8D5M15-M3/I

VSS8D5M15 www.vishay.com Vishay General Semiconductor Surface-Mount TMBS® (Trench MOS Barrier Schottky) Rectifier FEATURES eSMP® Series • Low-profile package Available • Meets MSL level 1, per LF maximum peak of 260 °C J-STD-020, • AEC-Q101 qualified available - Automotive ordering code: base P/NHM3 • Compatible to SOD-128 package case outline Top View Bottom View • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 SlimSMAW (DO-221AD) Cathode Anode DESIGN SUPPORT TOOLS click logo to get started Models TYPICAL APPLICATIONS For use in high frequency inverters, freewheeling, DC/DC converters, and polarity protection in commercial, industrial, and automotive applications. MECHANICAL DATA Available PRIMARY CHARACTERISTICS IF(AV) 5A VRRM 150 V IFSM 100 A VF at IF = 5 A (TA = 125 °C) 0.68 V TJ max. 175 °C Package SlimSMAW (DO-221AD) Circuit configuration Single Case: SlimSMAW (DO-221AD) Molding compound meets UL 94 V-0 flammability rating  Base P/N-M3 - halogen-free, RoHS-compliant Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Terminals: matte tin plated J-STD-002 and JESD 22-B102 leads, solderable per M3 and HM3 suffix meet JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage VSS8D5M15 VRRM 150 IF(AV) (1) 5 IF(AV) (2) 2 Peak forward surge current 10 ms single half sine-wave superimposed on rated load IFSM 100 Operating junction temperature range TJ (3) -40 to +175 Storage temperature range TSTG -55 to +175 Maximum average forward rectified current (fig.1) UNIT 5M15 V A A °C Notes (1) Mounted on 30 mm x 30 mm aluminum PCB pad areas (2) Free air, mounted on recommended copper pad area (3) The heat generated must be less than the thermal conductivity from junction-to-ambient: dP /dT < 1/R D J JA Revision: 21-Jan-2019 Document Number: 87448 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSS8D5M15 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 2.5 A IF = 5 A Instantaneous forward voltage IF = 2.5 A IF = 5 A VR = 100 V Reverse current VR = 150 V Typical junction capacitance SYMBOL TA = 25 °C VF (1) TA = 125 °C TA = 25 °C TA = 125 °C TA = 25 °C TYP. MAX. 0.79 - 1.03 1.15 0.57 - 0.68 0.76 0.01 - 0.7 - - 0.18 1 4 300 - IR (2) TA = 125 °C 4.0 V, 1 MHz CJ UNIT V mA pF Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: pulse width  5 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise specified) PARAMETER Typical thermal resistance SYMBOL TYP. MAX. RJA (1)(2) 120 150 RJM (3) 10 12 UNIT °C/W Notes (1) The heat generated must be less than the thermal conductivity from junction-to-ambient: dP /dT < 1/R D J JA (2) Thermal resistance junction-to-ambient to follow JEDEC® 51-2A, device mounted on FR4 PCB, 2 oz., standard footprint (3) Thermal resistance junction-to-mount to follow JEDEC 51-14 transient dual interface test method (TDIM) ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) VSS8D5M15-M3/H 0.033 VSS8D5M15-M3/I VSS8D5M15HM3/H (1) VSS8D5M15HM3/I (1) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE H 3500 7" diameter plastic tape and reel 0.033 I 14 000 13" diameter plastic tape and reel 0.033 H 3500 7" diameter plastic tape and reel 0.033 I 14 000 13" diameter plastic tape and reel Note AEC-Q101 qualified (1) Revision: 21-Jan-2019 Document Number: 87448 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSS8D5M15 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Axis Title Axis Title 10000 1000 3 RthJA = 120 °C/W 100 2 1 TM measured at cathode terminal mount typical values 0 0 25 50 75 100 10 125 150 TJ = 175 °C 10 TJ = 150 °C 1 0.1 TJ = 100 °C 0.01 100 0.001 TJ = 25 °C 0.0001 TJ = -40 °C 0.00001 175 20 40 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Leakage Characteristics Axis Title Axis Title 10000 1000 10000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.5 D = 1.0 D = 0.2 2.0 1st line 2nd line 1000 D = 0.3 3.0 D = 0.1 100 T 1.0 D = tp/T 1000 1st line 2nd line 4.0 2nd line Junction Capacitance (pF) D = 0.8 2nd line Average Power Loss (W) 10 60 Mount Temperature (°C) 5.0 100 100 tp 10 0 10 0.1 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 1 10 100 10 1000 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Junction Capacitance Axis Title Axis Title 1000 1st line 2nd line 1 TJ = 125 °C TJ = 100 °C 100 TJ = 25 °C TJ = -40 °C 10 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 2nd line Transient Thermal Impedance (°C/W) TJ = 175 °C TJ = 150 °C 10000 1000 10000 Junction to ambient 100 1000 10 100 1st line 2nd line 10 2nd line Instantaneous Forward Current (A) 1000 TJ = 125 °C 1st line 2nd line 5 2nd line Instantaneous Reverse Current (mA) RthJM = 10.0 °C/W 4 10000 100 1st line 2nd line 2nd line Average Forward Rectified Current (A) 6 1 0.01 10 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Revision: 21-Jan-2019 Document Number: 87448 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSS8D5M15 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SlimSMAW (DO-221AD) Cathode band 0.106 (2.70) 0.075 (1.90) 0.063 (1.60) 0.091 (2.30) 0.032 (0.81) 0.014 (0.36) 0.158 (4.00) 0.142 (3.60) 0.024 (0.60) 0.012 (0.30) 0.197 (5.00) 0.173 (4.40) 0.043 (1.10) 0.035 (0.90) 0.083 (2.10) min. 0.009 (0.22) 0.004 (0.10) 0.055 (1.40) min. 0.118 (3.00) max. 0.055 (1.40) min. 0.228 (5.80) ref. Mounting pad layout Revision: 21-Jan-2019 Document Number: 87448 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000