VT5202-M3, VFT5202-M3, VBT5202-M3, VIT5202-M3
www.vishay.com
Vishay General Semiconductor
Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.58 V at IF = 2.5 A
FEATURES
TMBS ®
• Trench MOS Schottky technology Gen 2
TO-220AC
ITO-220AC
• Low forward voltage drop, low power losses
• High efficiency operation
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C (for TO-263AB package)
2
• Solder bath temperature 275 °C max. 10 s, per
JESD 22-B106 (for TO-220AC, ITO-220AC, and
TO-262AA package)
2
1
1
VT5202
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
VFT5202
PIN 1
PIN 1
CASE
PIN 2
PIN 2
TO-263AB
TYPICAL APPLICATIONS
For use in high frequency DC/DC converters, switching
power supplies, freewheeling diodes, OR-ing diode, and
reverse battery protection.
TO-262AA
K
K
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, TO-263AB, and TO-262AA
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
A
A
NC
K
NC
VBT5202
VIT5202
NC
K
A
HEATSINK
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test
K
NC
HEATSINK
A
PRIMARY CHARACTERISTICS
IF(AV)
per
Polarity: As marked
5.0 A
VRRM
200 V
IFSM
100 A
VF at IF = 5.0 A (TJ = 125 °C)
0.65 V
TJ max.
175 °C
Package
TO-220AC, ITO-220AC,
TO-263AB, TO-262AA
Diode variation
Single die
Mounting Torque: 10 in-lbs max.
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VT5202
VFT5202
VBT5202
VIT5202
UNIT
Maximum repetitive peak reverse voltage
VRRM
200
V
Maximum average forward rectified current (fig. 1)
IF(AV)
5.0
A
Maximum DC reverse voltage
VDC
160
V
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
100
A
dV/dt
10 000
V/μs
VAC
1500
V
TJ, TSTG
-40 to +175
°C
Voltage rate of change (rated VR)
Isolation voltage (ITO-220AC only)
from terminal to heatsink, t = 1 min
Operating junction and storage temperature range
Revision: 12-Dec-16
Document Number: 87700
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VT5202-M3, VFT5202-M3, VBT5202-M3, VIT5202-M3
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 2.5 A
Instantaneous forward voltage per diode
(1)
IF = 5.0 A
IF = 2.5 A
IF = 5.0 A
VR = 160 V
Reverse current (2)
VR = 200 V
SYMBOL
TYP.
MAX.
0.74
-
0.80
0.88
0.58
-
0.65
0.73
TA = 25 °C
0.2
-
μA
TA = 125 °C
0.4
-
mA
TA = 25 °C
VF
TA = 125 °C
IR
TA = 25 °C
TA = 125 °C
UNIT
V
-
150
μA
1.0
5
mA
VBT5202
VIT5202
UNIT
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width 5 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance
SYMBOL
VT5202
VFT5202
RJC
3.4
6.8
3.4
52
60
52
RJA
(1)(2)
°C/W
Notes
(1) The heat generated must be less than the thermal conductivity from junction-to-ambient: dP /dT < 1/R
D
J
JA
(2) Free air, without heatsink
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AC
VT5202-M3/4W
1.89
4W
50/tube
Tube
ITO-220AC
VFT5202-M3/4W
1.65
4W
50/tube
Tube
TO-263AB
VBT5202-M3/4W
1.38
4W
50/tube
Tube
TO-263AB
VBT5202-M3/8W
1.38
8W
800/reel
Tape and reel
TO-262AA
VIT5202-M3/4W
1.46
4W
50/tube
Tube
Revision: 12-Dec-16
Document Number: 87700
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VT5202-M3, VFT5202-M3, VBT5202-M3, VIT5202-M3
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
6
Instantaneous Reverse Current (mA)
100000
Rth JA = Rth JC
5
TA , RthJA
4
3
2
1
V(B,I)T5202
VFT5202
0
0
25
50
75
100
125
150
10000
TA = 175 °C
1000
TA = 150 °C
TA = 125 °C
100
TA = 100 °C
10
1
TA = 25 °C
0.1
0.01
10
175
3.5
D = 0.2
3.0
D = 1.0
2.5
2.0
1.5
T
1.0
D = tp/T
80
90
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
100
10
0
1
2
3
4
5
0.1
6
1
Average Forward Current (A)
TA = 175 °C
TA = 150 °C
TA = 125 °C
1
TA = 100 °C
TA = 25 °C
0.1
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3
Instantaneous Forward Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
100
Fig. 5 - Typical Junction Capacitance
Transient Thermal Impedance (°C/W)
100
10
Reverse Voltage (V)
Fig. 2 - Forward Power Dissipation Characteristics
Instantaneous Forward Current (A)
70
tp
0.0
10
60
1000
D = 0.1
0.5
50
D = 0.5
Junction Capacitance (pF)
Average Power Loss (W)
D = 0.3
40
Fig. 4 - Typical Reverse Characteristics
D = 0.8
4.0
30
Percent of Rated Peak Reverse Voltage (%)
Case Temperature (°C)
Fig. 1 - Maximum Forward Current Derating Curve
4.5
20
10
Junction to Case
V(B,I)T5202
VFT5202
1
0.01
0.1
1
10
100
t - Pulse Duration (s)
Fig. 6 - Typical Transient Thermal Impedance
Revision: 12-Dec-16
Document Number: 87700
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VT5202-M3, VFT5202-M3, VBT5202-M3, VIT5202-M3
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AC
0.415 (10.54)
0.380 (9.65)
0.161 (4.08)
DIA.
0.139 (3.53)
0.113 (2.87)
0.103 (2.62)
0.635 (16.13)
0.625 (15.87)
1
PIN
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
2
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.160 (4.06)
0.140 (3.56)
0.057 (1.45)
0.045 (1.14)
0.603 (15.32)
0.573 (14.55)
0.110 (2.79)
0.100 (2.54)
0.560 (14.22)
0.530 (13.46)
0.037 (0.94)
0.027 (0.68)
0.022 (0.56)
0.014 (0.36)
0.205 (5.20)
0.195 (4.95)
ITO-220AC
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.404 (10.26)
0.384 (9.75)
0.076 (1.93) REF.
0.076 (1.93) REF.
45° REF.
0.600 (15.24)
0.580 (14.73)
0.671 (17.04)
0.651 (16.54)
PIN
1
2
0.191 (4.85)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.025 (0.64)
0.015 (0.38)
0.057 (1.45)
0.045 (1.14)
0.035 (0.89)
0.025 (0.64)
0.205 (5.21)
0.195 (4.95)
7° REF.
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.135 (3.43) DIA.
0.122 (3.08) DIA.
7° REF.
0.350 (8.89)
0.330 (8.38)
7° REF.
0.110 (2.79)
0.100 (2.54)
0.028 (0.71)
0.020 (0.51)
Revision: 12-Dec-16
Document Number: 87700
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VT5202-M3, VFT5202-M3, VBT5202-M3, VIT5202-M3
www.vishay.com
Vishay General Semiconductor
TO-262AA
0.411 (10.45)
0.380 (9.65)
0.950 (24.13)
0.920 (23.37)
1
PIN
2 3
0.185 (4.70)
0.175 (4.44)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.045 (1.14)
0.401 (10.19)
0.381 (9.68)
0.350 (8.89)
0.330 (8.38)
0.510 (12.95)
0.470 (11.94)
0.160 (4.06)
0.140 (3.56)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.104 (2.65)
0.096 (2.45)
0.560 (14.22)
0.530 (13.46)
0.035 (0.90)
0.028 (0.70)
0.205 (5.20)
0.195 (4.95)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.022 (0.56)
0.014 (0.35)
Mounting Pad Layout
0.42 (10.66) MIN.
0.055 (1.40)
0.045 (1.14)
K
0.33 (8.38) MIN.
0.360 (9.14)
0.320 (8.13)
NC
K
A
0.624 (15.85)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.670 (17.02)
0.591 (15.00)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Revision: 12-Dec-16
Document Number: 87700
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
