VX60202PW-M3/P

VX60202PW www.vishay.com Vishay General Semiconductor Dual High-Voltage TMBS® (Trench MOS Barrier Schottky) Rectifier Ultra Low VF = 0.47 V at IF = 5.0 A FEATURES • Trench MOS Schottky technology Available • Low forward voltage drop, low power losses • High efficiency operation 1 • Solder bath temperature 275 °C maximum, 10 s per JESD 22-B106 2 3 TO-247AD 3L • AEC-Q101 qualified available - Automotive ordering code: base P/NHM3 PIN 1 PIN 2 PIN 3 CASE • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS IF(AV) 2 x 30 A VRRM 200 V IFSM 350 A VF at IF = 30 A (TJ = 125 °C) 0.65 V TJ max. 175 °C Package TO-247AD 3L Circuit configuration Common cathode For use in high frequency DC/DC converters, switching power supplies, freewheeling diodes, OR-ing diode, and reverse battery protection in commercial, industrial, and automotive application. MECHANICAL DATA Case: TO-247AD 3L Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B,.....) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: as marked Mounting torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) per device per diode SYMBOL VX60202PW UNIT VRRM 200 V IF(AV) 60 30 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 350 Operating junction temperature range TJ (1) -40 to +175 Storage temperature range TSTG -40 to +175 A A °C Note (1) The heat generated must be less than the thermal conductivity from junction-to-ambient: dP /dT < 1/R D J θJA Revision: 17-Apr-2023 Document Number: 88018 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VX60202PW www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TJ = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL IF = 5 A IF = 15 A Instantaneous forward voltage per diode TJ = 25 °C IF = 30 A VF (1) IF = 5 A IF = 15 A TJ = 125 °C IF = 30 A VR = 160 V Reverse current at rated VR per diode VR = 200 V Typical junction capacitance TYP. MAX. 0.61 - 0.72 - 0.79 0.84 0.47 - 0.57 - 0.65 0.71 TJ = 25 °C 0.002 - TJ = 125 °C 3.7 - - 0.2 8.5 40 2800 - IR (2) TJ = 25 °C TJ = 125 °C 4.0 V, 1 MHz CJ UNIT V mA pF Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 5 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance per device SYMBOL VX60202PW UNIT RθJC 0.6 °C/W ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE VX60202PW-M3/P 5.64 P 25/tube Tube VX60202PWHM3_A/P (1) 5.64 P 25/tube Tube Note (1) AEC-Q101 qualified Revision: 17-Apr-2023 Document Number: 88018 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VX60202PW www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Axis Title Axis Title 10000 1000 40 30 100 20 10 0 25 50 75 100 125 150 10 1000 1 0.1 TJ = 100 °C 0.01 100 0.001 TJ = 25 °C 0.0001 0.00001 TJ = -40 °C 175 10 20 40 60 100 Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Leakage Characteristics Axis Title Axis Title 10000 D = 0.8 10 000 10000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.3 1000 D = 1.0 15.0 10.0 1st line 2nd line D = 0.2 D = 0.1 100 T 5.0 D = tp/T 10 5 10 15 20 25 1000 100 tp 0 0 1000 1st line 2nd line 20.0 2nd line Junction Capacitance (pF) D = 0.5 2nd line Average Power Loss (W) 80 Case Temperature (°C) 25.0 30 100 0.1 35 1 10 Fig. 2 - Average Power Loss Characteristics Fig. 5 - Typical Junction Capacitance Axis Title 1 1st line 2nd line 1000 TJ = 125 °C TJ = 100 °C 100 TJ = 25 °C TJ = -40 ƱC 10 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1000 1st line 2nd line TJ = 150 ƱC 10000 Junction to case 2nd line Transient Thermal Impedance (°C/W) 10000 TJ = 175 ƱC 1 10 1000 Reverse Voltage (V) Axis Title 10 100 Average Forward Current (A) 100 2nd line Instantaneous Forward Current (A) TJ = 150 °C TJ = 125 °C 0.000001 10 0 TJ = 175 °C 100 1st line 2nd line 60 2nd line Instantaneous Reverse Current (mA) TC = 149.3ƱC, RthJC = 0.6 ƱC/W 50 10000 1000 1st line 2nd line 2nd line Average Forward Rectified Current (A) 70 100 0.1 0.01 10 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Revision: 17-Apr-2023 Document Number: 88018 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VX60202PW www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in millimeters (inches) TO-247AD 3L A A (3) (6) ) P E B (2) R/2 A2 S (Datum B) Ø K M DBM ) P1 A D2 Q 2xR (2) D1 (4) D 1 4 D 3 2 Thermal pad (5) L1 C L (4) E1 A 0.01 M D B M View A - A See view B 2 x b2 3xb C 2x e b4 A1 0.10 M C A M (b1, b3, b5) Plating Base metal D DE (c) c1 E C C (b, b2, b4) (4) Section C - C, D - D, E - E SYMBOL A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.50 2.49 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.34 2.59 3.43 2.59 3.38 0.38 0.89 0.38 0.84 19.71 20.70 13.08 - INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.059 0.098 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.092 0.102 0.135 0.102 0.133 0.015 0.035 0.015 0.033 0.776 0.815 0.515 - View B NOTES 3 4 SYMBOL D2 E E1 e ØK L L1 ØP Ø P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.30 15.29 15.87 13.46 5.46 BSC 0.254 19.81 20.32 3.71 4.29 3.56 3.66 6.98 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.051 0.602 0.625 0.53 0.215 BSC 0.010 0.780 0.800 0.146 0.169 0.14 0.144 0.275 0.209 0.224 0.178 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerancing per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC® outline TO-247 with exception of dimension A min., D, E min., Q min., S, and note 4 Revision: 17-Apr-2023 Document Number: 88018 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000