WI140316WQ75236BJ4

TWXFZ 140266, TWXFZ 140316, TWXFZ 140376 www.vishay.com Vishay Draloric Watercooled RF Power Pot Capacitors Internal Cooling System FEATURES • High voltage, current and power ratings • Compact design reduces terminal self inductance and permit operation up to higher frequencies • These pot capacitors feature increased density through watercooling and rugged mechanical construction for a maximum reliability APPLICATIONS Watercooled RF power pot capacitors are designed for use in the tank circuit of high power RF equipment such as induction heating and welding equipment, dielectric heating or a variety of specialized RF applications. QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 Ceramic Dielectric CAPACITANCE RANGE 7.5 nF to 10.0 nF R85 Type TWXFZ 140266 TWXFZ 140316 Voltage (Vp) 14 000 22 500 20 000 27 000 Min. Capacitance (pF) 10 000 7500 10 000 7500 Max. Capacitance (pF) 10 000 7500 10 000 7500 Mounting TWXFZ 140376 Screw terminal PRODUCT DESCRIPTION TWXFZ pot-styled capacitors dissipate the heat produced under load by means of water flow around the capacitor elements. In order to provide protection from influences of the chemical / physical characteristics of the coolant, a glass passivation layer is applied over the cooled noble metal electrode. The electrical terminations are made directly to the noble metal electrodes utilizing special soldering techniques. This method of attachment provides a strong, rigid connection of unsurpassed reliability. The TWXF pot-styled capacitors feature an umbrella shaped insulating rim made from silicone elastomer to minimize the adverse effects of moisture, dust and other impurities in the working environment and to improve the characteristics of the electrical field. The capacitor body is protective lacquered. CAPACITANCE TOLERANCE ± 10 % CERAMIC DIELECTRIC R85 (TCC - 750 ppm/K) RATED VOLTAGE • 14 kVp • 20 kVp • 22.5 kVp • 27 kVp DIELECTRIC STRENGTH TEST 125 % to 200 % of rated voltage, 50 Hz RF POWER TEST 120 % to 140 % of rated power, for 10 minutes in a test generator circuit DISSIPATION FACTOR Max. 0.05 % Measuring frequencies: 300 kHz or 100 kHz MARKING Type designator, capacitance value and tolerance, rated RF voltage, ceramic material code, production date code, manufacturer logo, serial number. INSULATION RESISTANCE Min. 10 000 M (at 25 °C) OPERATING TEMPERATURE RANGE ACCESSORIES ADDED All watercooled pot capacitors are supplied with the necessary screws / nuts to make the connection to the electrode terminals. Ferrules and water fittings for the water supply connections are also included. Revision: 11-Sep-15 Details of watercooling find under “Guidelines”, next pages Document Number: 22132 1 For technical questions, contact: powcap@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TWXFZ 140266, TWXFZ 140316, TWXFZ 140376 www.vishay.com Vishay Draloric SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER CERAMIC CAP. VALUES (pF) RATED VOLTAGE (kVp) RATED POWER (kvar) RATED CURRENT (ARMS) MIN. WATER FLOW RATE PER MINUTE (Liter / US-gal.) R85 10 000 14 3000 350 3.0 / 0.81 R85 7500 22.5 4000 350 3.0 / 0.81 7500 27 INSTALLATION POSITION (MODEL 1 OR 2) TYPE TWXFZ 140266 WI140266WJ10336BJ1 WI140266WJ10336BJ2 1 2 TYPE TWXFZ 140316 WI140316WQ75236BJ2 WI140316WQ75236BJ4 2 1 TYPE TWXFZ 140376 WZ140376WT75236BJ1 WZ140376WT75236BJ2 WI140376WP10336BJ1 R85 4000 10 000 WI140376WP10336BJ2 1 350 2 3.0 / 0.81 1 20 2 DIMENSIONS in millimeters (inches) Model 1 85 (3.35) 3 (0.12) Model 2 M16 x 1.5 threads INSTALLATION POSITION: Accessories Revision: 11-Sep-15 Ø 10.0 (0.394 Dia.) 80 (3.15) 14.0 (0.551) Ø 139 (5.47 Dia.) Ø 134 (5.28 Dia.) WI140266: 266.0 ± 7.5 (10.472 ± 0.295) WI140316: 316.0 ± 7.5 (12.441 ± 0.295) WI140376, WZ140376: 376.0 ± 7.5 (14.803 ± 0.295) 7.0 (0.276) Ø 110 (4.33 Dia.) 133 (5.24) Details of the outer electrode terminal 36 (1.42) 40 (1.58) 25 (0.98) The position of water inlet and outlet is designed to be installed in a vertical position, connection fittings of the watercooling system downside. This allows any air to escapefrom the unit. Note that two positions of the outer electrode connection are available. This is displayed with MODEL 1 or MODEL 2 31 (1.22) Document Number: 22132 2 For technical questions, contact: powcap@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TWXFZ 140266, TWXFZ 140316, TWXFZ 140376 www.vishay.com Vishay Draloric DERATING DIAGRAMS WI140266WJ10336BJ1, WI140266WJ10336BJ2 Ig (ARMS) Qg (kvar) 10 000 0.49 MHz 0.65 MHz Ug (kVp) 100 Ug 1000 10 Qg 100 1 Ig 10 0.1 0.01 0.1 1 10 100 Frequency (MHz) WI140316WQ75236BJ4, WI140316WQ75236BJ2 Ig (ARMS) Qg (kvar) 10 000 0.34 MHz 0.65 MHz Ug (kVp) 100 Ug 1000 10 Qg 100 1 Ig 10 0.1 0.01 0.1 1 10 100 Frequency (MHz) WZ140376WT75236BJ1, WZ140376WT75236BJ2 0.23 MHz Ug (kVp) 100 Ig (ARMS) Qg (kvar) 10 000 0.65 MHz Ug 10 1000 Qg 100 1 Ig 10 0.1 0.01 0.1 1 10 100 Frequency (MHz) WI140376WP10336BJ1, WI140376WP10336BJ2 Ig (ARMS) Qg (kvar) 10 000 0.32 MHz 0.49 MHz Ug (kVp) 100 Ug 1000 10 Qg 100 1 Ig 0.1 0.01 10 0.1 1 10 100 Frequency (MHz) Revision: 11-Sep-15 Document Number: 22132 3 For technical questions, contact: powcap@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TWXFZ 140266, TWXFZ 140316, TWXFZ 140376 www.vishay.com Vishay Draloric GUIDELINES ELECTRICAL DATA AND GUIDELINES • The main physical and electrical characteristics of the capacitors and ceramic materials used, are listed in the tables on the general section and in the individual datasheets • The continuous limit values of voltage, current, and power given in the diagrams must be observed. • The rated voltage given in the tables is the peak value of the sinusoidal AC voltage or the sum of the DC and peak AC voltages for which the capacitor is rated under continuous operation. • The rated current in the tables is the effective value of the sinusoidal current for which the current paths of the capacitor are designed. INSTALLATION • Watercooled pot capacitors (TWXFZ 140266, TWXFZ 140316, TWXFZ 140376) are designed to be installed in a vertical position, connecting fittings of the watercooling system downside. Model 1 and Model 2 allows a flexible, 90° turned mounting position of the capacitor. For large generators requiring multiple capacitors we recommended a circular mounting pattern for optimum circuit performance. • When capacitors are connected in parallel, care should be taken to mount the top electrodes of the capacitor away from the RF bus bar to minimize the effects of stray electromagnetic fields. The capacitors elements must not exceed a temperature of more than +100 °C. • The electrical connection to the inner electrode must be flexible in order to prevent the generation of the physical forces which could damage the capacitor elements. Such forces are often generated by the dimensional differences resulting from the normal physical tolerances of the capacitors. The capacitor’s inner electrode connector must not be used as a mechanical support for other devices or components. COOLING • The cooling system is designed to operate at a maximum water pressure of 4 bars (58 psi). • The position of water inlet and outlet is designed to be installed in a vertical position, connection fittings of the watercooling system downside. This allows any air to escape from the unit. Horizontal installations require that both water connections be at the top side of the unit. To preserve the capacitors from frost damages during the transport, we offer special models with outlet screws for emptying the cooling water from the unit. • The minimum water flow rates specified in the tables must be observed. When using antifreeze mixtures, the flow rate should be increased by at least 20 %. • The cooling system is designed to have a water temperature increase of < 10 °C (water inlet to water outlet) when the capacitor is operated at full rated power and the minimum water flow rate. A water intake temperature of  30 °C is recommended. If the cooling system of several capacitors is connected in series, the intake temperature of the coolant must not exceed 50 °C for any capacitors. • The pressure drop in a series connected cooling system is small. The table below illustrates the effects upon water flow rates as a function of the number of series connected typical watercooled capacitors in the system with a constant intake water pressure of 3 bars (43.5 psi). Number of cooling systems in series 1 2 3 4 5 Water flow rate (liters/minute) 13.0 10.5 8.5 7.3 6.0 Water flow rate (US-gal./minute) 3.43 2.77 2.24 1.92 1.58 • Intake water temperature fluctuations in excess of 3 °C/s must be avoided to prevent damage to the capacitor elements. • A coolant temperature rate monitor must provide a fail-safe on / off power control for the RF equipment. • Normal tap water or de-mineralized water may be used for cooling. The water must be reasonably free of CaCO3 and clear of foreign particles or milkyness. The pH-value of the coolant should between 6 and 8. Revision: 11-Sep-15 Document Number: 22132 4 For technical questions, contact: powcap@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TWXFZ 140266, TWXFZ 140316, TWXFZ 140376 www.vishay.com Vishay Draloric QUALITY AND RELIABILITY ELECTRICAL AND MECHANICAL SCREENING TESTS All capacitors are subjected to the following tests prior to shipment • Capacitance value (1.0 MHz or 0.1 MHz, 20 VRMS, 25 °C ± 5 °C) • Dissipation factor (1.0 MHz or 0.3 MHz, 10 VRMS, 25 °C ± 5 °C) • Insulation resistance (100 VDC, 25 °C ± 5 °C) • Dielectric strength (200 % rated peak voltage, 50 Hz, 5 minutes) • RF power test (120 % to 140 % rated power for 10 minutes in a test generator circuit) • Pressure test (standard: 6 bars [87 psi] for 1 minute, 25 °C ± 5 °C) WARRANTY STIPULATION FOR WATERCOOLED CERAMIC POWER RF CAPACITORS • Unless otherwise provided for hereinafter, warranty shall be governed by General Terms of Sale and Delivery. • Warranty is assumed for capacitors which fail to operate owing to faults in material or production, and within the warranty period for capacitors • Excluded from warranty are capacitors prematurely rendered unserviceable owing to improper treatment, overloading, circuit errors, as well as capacitors operated without observing the data given in our catalogue. Warranty is also excluded in cases where faults can no longer be recognized on the capacitor owing to third party interferences. Warranty is only effectively assumed when meeting the requirements referred to hereinafter. • For claiming warranty, the defective capacitor should be returned to us, if possible in its original packing, within 14 days following the data of failure, being accompanied by the completely filled-in and signed Original Guarantee Certificate. The risks of transportation, as well as any shipping costs and other charges shall in any case be borne by the sender. • Warranty can only become effective if the defective capacitor is received by us in the same condition as it was when it happened to fail. • We have the right to inspect any records proving the use of the capacitor. • The decision as to whether we are obliged to assume warranty for the capacitor shall exclusively rest with us. • When acknowledging the warranty claim, any non-repairable capacitor shall remain our property. When refusing a warranty claim the defective capacitor will be returned at the customer’s expense only if demanded so explicitly when asserting the warranty claim. In case examination required disassembly of the capacitor no claims for damage can be derived therefrom. • The customer gives us the right to have the system checked in which the capacitor was operated. • When acknowledging a warranty claim, restitution is made by supplying either a repaired and newly tested capacitor or by supplying a new one. • Warranty shall only extend to the capacitor itself. Any further claims for damages are excluded. CONDITIONS OF GUARANTEE Pursuant to the foregoing stipulations we assume warranty for these watercooled pot capacitors up to a period of 5000 hours of operating service. Any claims for warranty, however will extinguish 24 months following the date of delivery. RELATED DOCUMENTS General Information Revision: 11-Sep-15 www.vishay.com/doc?22071 Document Number: 22132 5 For technical questions, contact: powcap@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000