XMC7K24CA-M3/H

XMC7K24CA www.vishay.com Vishay General Semiconductor Surface Mount XClampRTM Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES • XClampRTM extremely low clamping voltage • IPPM = 180 A with a 10/1000 μs waveform • TJ = 175 °C capability suitable for high reliability and automotive requirement • Bidirectional • Low leakage current SMC (DO-214AB) • AEC-Q101 qualified - Automotive ordering code: base P/NHM3 PRIMARY CHARACTERISTICS VWM 24 V • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C VBR 26.7 V to 29.5 V • UL recognition for safety 497B with file number E136766 VCL max. 24 V PPPM (10/1000 μs) 7000 W (1) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TJ max. 175 °C Polarity Bidirectional Package SMC (DO-214AB) MECHANICAL DATA Case: SMC (DO-214AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and industrial grade Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Note (1) Equivalent I PPM with conventional 7 KW TVS TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switch and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 and HM3 suffix meet JESD 201 class 2 whisker test Polarity: no marking on bidirectional types MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse current with a 10/1000 μs waveform, fig.1 Maximum working stand-off voltage Operating junction and storage temperature range SYMBOL VALUE UNIT IPPM (1) 180 A VWM 24 V TJ, TSTG -55 to +175 °C Note (1) Non-repetitive current pulse and derated above T = 25 °C A ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE XMC7K24CA C7BZ BREAKDOWN VOLTAGE VBR (V) AT IT MIN. MAX. 26.7 29.5 TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) 1.0 24 ADDITIONAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Clamping voltage for 10/1000 μs exponentially decaying waveform Reverse leakage current TEST CONDITIONS SYMBOL MIN. TYP. MAX. UNIT at IPP = 180 A VC 18 - 24 V IR - - 1.0 μA Rated VWM TJ = 25 °C Revision: 20-Jan-2022 Document Number: 87023 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XMC7K24CA www.vishay.com Vishay General Semiconductor ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE XMC7K24CA-M3/H 0.261 BASE QUANTITY DELIVERY MODE H 850 7" diameter plastic tape and reel 13" diameter plastic tape and reel XMC7K24CA-M3/I 0.261 I 3500 XMC7K24CAHM3/H (1) 0.261 H 850 7" diameter plastic tape and reel XMC7K24CAHM3/I(1) 0.261 I 3500 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified I - V CURVE CHARACTERISTICS I IPP VBR.......Breakdown voltage VBR VC IT IT..........Reverse test current IT VC VBR V VC........Clamping voltage IPP........Peak pulse surge current IPP Revision: 20-Jan-2022 Document Number: 87023 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XMC7K24CA www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Axis Title Axis Title 10000 TJ = 25 °C Pulse width (td) is defined as the point where the peak current decays to 50 % of IPPM tr = 10 µs 2nd line IPPM - Peak Pulse Current, % IRSM Non-repetitive exponential pulse, 1000 1000 1st line 2nd line 2nd line IPPM - Peak Pulse Current (A) 10000 150 100 100 1000 100 Peak value IPPM 1st line 2nd line 10 000 Half value IPPM- IPPM/2 100 50 td 10 10 000 10 10 100 1000 10 0 0 0.5 1.0 1.5 2.0 2.5 3.0 td - Pulse Width (µs) tp - Time (ms) Fig. 1 - Peak Pulse Current Rating Curve Fig. 3 - Pulse Waveform 3.5 4.0 Axis Title Axis Title 100 3.2 10000 10000 1000 50 100 25 2.8 2.6 1000 2.4 1st line 2nd line 2nd line CJ - Junction Capacitance (nF) 75 1st line 2nd line Peak Pulse Current (IPP) Derating in Percentage (%) 3.0 2.2 2.0 1.8 100 1.6 1.4 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1.2 10 0 0 25 50 75 100 125 150 10 1.0 0 175 2 4 6 8 10 12 14 16 18 20 22 24 TJ - Initial Temperature (°C) VR - Reverse Applied Voltage (V) Fig. 2 - Peak Pulse Current vs. Initial Junction Temperature Fig. 4 - Typical Junction Capacitance Axis Title 10000 29 1000 1st line 2nd line 2nd line Breakdown Voltage (V) 30 28 100 27 10 26 -55 -15 25 65 105 145 185 TA = TJ - Temperature (°C) Fig. 5 - Typical Breakdown Voltage vs. Temperature Curve Revision: 20-Jan-2022 Document Number: 87023 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XMC7K24CA www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMC (DO-214AB) Mounting Pad Layout 0.185 (4.69) MAX. 0.126 (3.20) 0.246 (6.22) 0.220 (5.59) 0.114 (2.90) 0.126 (3.20) MIN. 0.280 (7.11) 0.060 (1.52) MIN. 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.320 REF. 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.320 (8.13) 0.305 (7.75) Revision: 20-Jan-2022 Document Number: 87023 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000