Y079328R7710B9L

RCK Series Vishay Foil Resistors High Precision Foil Resistor with TCR of ± 2.0 ppm/°C, Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 % FEATURES INTRODUCTION Bulk Metal® Foil (BMF) technology outperforms all other resistor technologies available today for applications that require high precision and high stability. This technology has been pioneered and developed by Vishay Foil Resistors (VFR), and products based on this technology are the most suitable for a wide range of applications. BMF technology allows the production of customer-oriented products, designed to satisfy specific challenging technical requirements. The RCK series of BMF resistors offers low TCR, excellent load life stability, tight tolerance, fast response time, low current noise, low thermal EMF and low voltage coefficient, all in one resistor. The RCK series is virtually insensitive to destabillizing factors. The resistor element is a solid alloy that displays the desirable bulk properties of its parent material, thus it is inherently stable and noise free. The standard design of these resistors provides a unique combination of characteristics found in no other single resistor. • Temperature coefficient of resistance (TCR): - 55 °C to + 125 °C, 25 °C ref. - RCK0X series: ± 2 ppm/°C typical (see table 1) • Power rating: to 1 W at + 125 °C • Resistance tolerance: to ± 0.005 % (50 ppm) • Load life stability: ± 0.005 % at 70 °C, 2000 h at rated power • Resistance range: 0.5 Ω to 1 MΩ (for higher or lower values, please contact Application Engineering) • Vishay Foil resistors are not restricted to standard values; specific “as required” values can be supplied at no extra cost or delivery (e.g. 1K2345 vs. 1K) • Electrostatic discharge (ESD) at least to 25 kV • Non inductive, non capacitive design • Rise time: 1 ns effectively no ringing • Current noise: 0.010 µVRMS/V of applied voltage (< - 40 dB) • Thermal EMF: 0.05 µV/°C • Voltage coefficient: < 0.1 ppm/V • Low inductance: < 0.08 µH • Non hot-spot design • Terminal finishes available: lead (Pb)-free, tin/lead alloy • Matched sets are available on request (TCR tracking: to 0.5 ppm/°C) • Prototype quantities available in just 5 working days or sooner. For more information, please contact foil@vishaypg.com • For better TCR performances please review the datasheets for the Z Series and Z203 VFR's application engineering department is available to advise and to make recommendations. For non-standard technical requirements and special applications, please contact foil@vishaypg.com. TABLE 1 - RESISTANCE VERSUS TCR (- 55 °C to + 125 °C, + 25 °C ref.) RESISTANCE VALUE (Ω) TYPICAL TCR AND MAX SPREAD (ppm/°C) RCK0X 80 to < 1M ± 2 ± 2.5 RCK0X 50 to < 80 ± 2 ± 3.5 RCK0X 0.5 to < 50 ± 2 ± 4.5 RESISTOR(1) (1) FIGURE 1 - TYPICAL RESISTANCE CHANGE VERSUS TEMPERATURE CURVES AND CHORD SLOPES (TCR) OF TWO ALLOYS IN MILITARY RANGE + 150 + 100 ΔR + 50 0 R (ppm) - 50 - 100 –2 ppm/°C +2 ppm/°C - 150 - 200 - 50 - 55 - 25 C Alloy 2 ppm/°C 0 + 25 + 50 + 75 + 100 + 125 Temperature (°C) X refers to RCK Series model number - see Table 2 * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 63214 Revision: 13-Jun-11 For any questions, contact: foil@vishaypg.com www.vishayfoilresistors.com 1 RCK Series Vishay Foil Resistors FIGURE 2 - STANDARD IMPRINTING AND DIMENSIONS Front View L H W Rear View Optional Customer Part Number Print specification, etc. if required Date Code 01 10 Year Week VFR XXXX RCK02 XXXXXX 100R01 0.01 % Resistance Value Code Tolerance ST1) SW Model Number LS LL Lead Material #22 AWG Round Solder Coated Copper (Pb - free coating available) Note 1. Standoffs provided to allow proper flushing of flux, debris, and contaminates from under resistor after all solder operations. 2. The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board when the standoffs are seated on the printed circuit board. TABLE 2 - MODEL SELECTION MODEL NUMBER RCK02A (RCK02) (1) RESISTANCE RANGE (Ω) 1 to 150K AMBIENT POWER RATING MAXIMUM WORKING VOLTAGE at + 70 °C at + 125 °C 0.6 W 0.3 W up to 100K 0.4 W 0.2 W 300 AVERAGE WEIGHT IN GRAMS 0.6 over 100K RCK04 1 to 500K 1.0 W 0.5 W up to 200K 0.6 W 0.3 W 350 1.4 over 200K RCK05A 1 to 750K 1.5 W 0.75 W up to 300K 0.8 W 0.4 W 350 1.9 over 300K RCK05 1 to 750K 1.5 W 0.75 W up to 300K 0.8 W 0.4 W 350 1.9 over 300K RCK06 0.5 to 1M 2.0 W 1.0 W up to 400K 1.0 W 0.5 W 500 over 400K 4.0 DIMENSIONS INCHES mm W: 0.0984 max. L: 0.300 ± 0.010 H: 0.326 ± 0.010 ST: 0.010 min. SW: 0.040 ± 0.010 LL: 1.000 ± 0.125 LS: 0.150 ± 0.0054 (1) W: 0.138 max. L: 0.575 max. H: 0.413 max. ST: 0.035 ± 0.005 SW: 0.050 ± 0.005 LL: 1.000 ± 0.125 LS: 0.400 ± 0.020 W: 0.160 max. L: 0.820 max. H: 0.413 max. ST: 0.035 ± 0.005 SW: 0.050 ± 0.005 LL: 1.000 ± 0.125 LS: 0.650 ± 0.020 W: 0.138 max. L: 0.890 max. H: 0.413 max. ST: 0.035 ± 0.005 SW: 0.050 ± 0.005 LL: 1.000 ± 0.125 LS: 0.7 ± 0.05 W: 0.260 max. L: 1.200 max. H: 0.413 max. ST: 0.035 ± 0.005 SW: 0.050 ± 0.005 LL: 1.000 ± 0.125 LS: 0.900 ± 0.020 2.5 max. 7.62 ± 0.25 8.28 ± 0.25 0.254 min. 1.02 ± 0.13 25.4 ± 3.18 3.81 ± 0.13 3.50 max. 14.61 max. 10.49 max. 0.889 ± 0.13 1.27 ± 0.13 25.4 ± 3.18 10.16 ± 0.51 4.06 max. 20.83 max. 10.49 max. 0.889 ± 0.13 1.27 ± 0.13 25.4 ± 3.18 16.51 ± 0.51 3.505 max. 22.606 max. 10.49 max. 0.889 ± 0.13 1.27 ± 0.13 25.4 ± 3.18 17.78 ± 1.27 6.60 max. 30.48 max. 10.49 max. 0.889 ± 0.13 1.27 ± 0.13 25.4 ± 3.18 22.86 ± 0.51 TIGHTEST TOLERANCE VS. LOWEST RESISTANCE VALUE 0.005 %/50 Ω 0.01 %/25 Ω 0.02 %/12 Ω 0.05 %/5 Ω 0.1 %/2 Ω 0.50 %/1 Ω 1 %/0.5 Ω Notes (1) For RCK02, L.S. = 5.08 mm (0.200 " inches). www.vishayfoilresistors.com 2 For any questions, contact: foil@vishaypg.com Document Number: 63214 Revision: 13-Jun-11 RCK Series Vishay Foil Resistors Percent of Rated Power at + 125 °C FIGURE 3 - POWER DERATING CURVE 200 % - 55 °C FIGURE 4 - TRIMMING TO VALUES (conceptual illustration) + 70 °C Double Rated Power 175 % 150 % Current Path Before Trimming Interloop Capacitance Reduction in Series 125 % Rated Power Current Path After Trimming Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance 100 % Mutual Inductance Reduction due to Change in Current Direction 75 % 50 % 25 % 0% - 75 - 50 - 25 0 25 50 75 100 125 150 175 200 Ambient Temperature (°C) Note: Foil shown in black, etched spaces in white TABLE 3 - ENVIRONMENTAL PERFORMANCE COMPARISON MIL-PRF-55182 CHAR J RCK-SERIES MAXIMUM ΔR RCK-SERIES TYPICAL ΔR Thermal shock, 5 x (- 65 °C to + 150 °C) ± 0.2 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm) Short time overload, 6.25 x rated power ± 0.2 % ± 0.01 % (100 ppm) ± 0.003 % (30 ppm) Resistance temperature characteristics(1) ± 25 ppm/°C ± 6.5 ppm/°C ± 2.0 ppm/°C Low temperature storage (24 h at - 65 °C) ± 0.15 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm) Low temperature operation (45 min, rated power at - 65 °C) ± 0.15 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm) Terminal strength ± 0.2 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm) Dielectric Withstanding Voltage (DWV) ± 0.15 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm) Resistance to solder heat ± 0.1 % ± 0.01 % (100 ppm) ± 0.005 % (50 ppm) Moisture resistance ± 0.4 % ± 0.05 % (500 ppm) ± 0.01 % (100 ppm) Shock ± 0.2 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm) Vibration ± 0.2 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm) 2000 h ± 0.5 % ± 0.015 % (150 ppm) ± 0.01 % (100 ppm) 10 000 h ± 2.0 % ± 0.05 % (500 ppm) ± 0.03 % (300 ppm) ± 0.5 % ± 0.015 % (150 ppm) ± 0.01 % (100 ppm) ± 2.0 % ± 0.1 % (1000 ppm) ± 0.05 % (500 ppm) 5 ppm/V < 0.1 ppm/V < 0.1 ppm/V Test Group I Test Group II Test Group III Test Group IV Test Group V Life test at 0.3 W/+ 125 °C Test Group Va Life test at 0.6 W (2 x rated power)/+ 70 °C, 2000 h Test Group VI High temperature exposure (2000 h at + 175 °C) Test Group VII Voltage coefficient (1) See Table 1. Document Number: 63214 Revision: 13-Jun-11 For any questions, contact: foil@vishaypg.com www.vishayfoilresistors.com 3 RCK Series Vishay Foil Resistors FIGURE 5 - LONG-TERM STABILITY OVER 29 YEARS (0.1W AT 70°C, 50 SAMPLES RCK02, 10KΩ) 40 ΔR/R (ppm) 20 0 -20 -40 -60 -80 -100 -120 0 5 10 15 20 25 30 Time (Years) STANDARD OPERATIONS AND TEST CONDITIONS A. Standard Test Operations: By 100 % Inspection • Short-time overload (6.25 x rated power for 5 s) • Resistance - tolerance check • Visual and mechanical By Sample Inspection • TCR • Environmental tests per table 3 on a quarterly basis to establish performance by similarity B. Standard Test Conditions: • Lead test point: 0.5" (12.7 mm) from resistor body • Temperature: + 23 °C ± 2 °C • Relative humidity: per MIL-STD-202 IMPROVED PERFORMANCE TESTING (IPT) The preceding information is based on product directly off the production line. Improved performance (meaning increased time stability with load and other stresses) is available through factory conducted “Improved Performance Testing”. The test routine is usually tailored to the user’s stability objectives and IPT-processed resistors can exhibit improved load-life stability levels of less than 50 ppm. Various screen test routines are available and all anticipated stresses must be taken into account before settling on one specific test routine. VFR's application engineering department is prepared to discuss and recommend appropriate routines given the full spectrum of anticipated stresses and stability requirements. TABLE 4 - “RCK” SERIES SPECIFICATIONS Stability (1) Load life at 2000 h Load life at 10 000 h Current Noise ± 0.015 % (150 ppm) Maximum ΔR at 0.3 W/+ 125 °C ± 0.005 % (50 ppm) Maximum ΔR at 0.1 W/+ 70 °C ± 0.05 % (500 ppm) Maximum ΔR at 0.3 W/+ 125 °C ± 0.01 % (100 ppm) Maximum ΔR at 0.05 W/+ 125 °C 0.010 µV (RMS)/V of applied voltage (- 40 dB) High Frequency Operation Rise time Inductance (L) 1.0 ns at 1 kΩ (2) 0.1 µH maximum; 0.08 µH typical Capacitance (C) 1.0 pF maximum; 0.5 pF typical Voltage Coefficient < 0.1 ppm/V (3) Thermal Electromotive Force (EMF) (4) 0.1 µV/°C Maximum; 0.05 µV/°C typical 1 µV/W (Model RCK02) Notes Load life ΔR maximum can be reduced by 80 %, please contact applications engineering department. Inductance (L) due mainly to the leads. The resolution limit of existing test equipment (within the measurement capability of the equipment, or “essentially zero”.) µV/°C relates to EMF due to lead temperature difference and µV/watt due to power applied to the resistor. (1) (2) (3) (4) www.vishayfoilresistors.com 4 For any questions, contact: foil@vishaypg.com Document Number: 63214 Revision: 13-Jun-11 RCK Series Vishay Foil Resistors TABLE 5 - GLOBAL PART NUMBER INFORMATION (1) NEW GLOBAL PART NUMBER: Y079380K5000V9L (preferred part number format) DENOTES PRECISION VALUE CHARACTERISTICS Y R=Ω K = kΩ M = MΩ 0 = standard 9 = lead (Pb)-free 1 to 999 = custom Y 0 7 9 3 8 0 K 5 0 0 0 V 9 PRODUCT CODE RESISTANCE TOLERANCE PACKAGING 0793 = RCK02 4793 = RCK02A 0771 = RCK04 0772 = RCK05 4772 = RCK05A 0773 = RCK06 V = ± 0.005 % T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % L = bulk pack L FOR EXAMPLE: ABOVE GLOBAL ORDER Y0793 80K5000 V 9 L: TYPE: RCK02 VALUE: 80.5 kΩ ABSOLUTE TOLERANCE: ± 0.005 % TERMINATION: lead (Pb)-free PACKAGING: bulk pack HISTORICAL PART NUMBER: RCK02 T 80K500 V B (will continue to be used) RCK02 MODEL RCK02 RCK02A RCK04 RCK05 RCK05A RCK06 T 80K500 V B TERMINATION T = lead (Pb)-free None = tin/lead alloy RESISTANCE VALUE TOLERANCE 250R00 = 250.00 Ω 5K2310 = 5.231 kΩ 1M000 = 1 MΩ V = ± 0.005 % T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % PACKAGING B = bulk pack Note (1) For non-standard requests, please contact application engineering. Document Number: 63214 Revision: 13-Jun-11 For any questions, contact: foil@vishaypg.com www.vishayfoilresistors.com 5 Legal Disclaimer Notice Vishay Precision Group, Inc. Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. You should ensure you have the current version of the relevant information by contacting VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of VPG. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale. Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Copyright Vishay Precision Group, Inc., 2014. All rights reserved. Document No.: 63999 Revision: 15-Jul-2014 www.vpgsensors.com 1