Y08753K30000T0L

VSH, VSC Bulk Metal® Foil Technology Low Profile Conformally Coated High Precision Resistor with Tight Tolerance from ± 0.01 % and Load Life Stability of ± 0.01 % and Instantaneous Thermal Stabilization FEATURES INTRODUCTION Bulk Metal® Foil (BMF) technology out-performs all other resistor technologies available today for applications that require high precision and high stability, and allows production of customer oriented products designed to satisfy challenging and specific technical requirements. The BMF provides an inherently low and predictable Temperature Coefficient of Resistance (TCR) and excellent load life stability for high precision analog applications. Model VSH offers low TCR, excellent load life stability, tight tolerance, excellent shelf life stability, low current noise and low voltage coefficient, all in the same resistor. Our application engineering department is available to advise and make recommendations. For non-standard technical requirements and special applications, please contact us using the e-mail address in the footer below. FIGURE 1 - STANDARD IMPRINTING AND DIMENSIONS in millimeters T L Resistance value code Tolerance symbol VSH1 9220 DATE CODE 92 20 YEAR WEEK 10K0 T TCR H 25.4 (1.0 min.) APPLICATIONS LS Lead material #22 AWG (0.025 diameter) solder coated copper L VSH1 VSC1 VSH2 VSC2 H  Temperature coefficient of resistance (TCR): ± 2.0 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C ref.) (see table 1)  Tolerance: to ± 0.01 %  Power rating: to 300 mW at + 70 °C  Load life stability: to ± 0.01 % at 70 °C, 2000 h at rated power  Resistance range: 5  to 120 k (for higher and lower values, please contact us)  Vishay Foil resistors are not restricted to standard values; specific “as required” values can be supplied at no extra cost or delivery (e.g. 1K2345 vs. 1K)  Thermal stabilization time < 1 s  Electrostatic discharge (ESD) up to 25 000 V  Short time overload:  0.01 %  Maximum working voltage: 300 V  Non inductive, non capacitive design  Rise time: 1 ns effectively no ringing  Current noise: < - 42 dB  Voltage coefficient < 0.1 ppm/V  Non inductive: < 0.08 µH  Non hot spot design  Terminal finish: lead (Pb)-free or tin/lead alloy  Matched sets are available per request  Compliant to RoHS directive 2002/95/EC  Prototype quantities available in just 5 working days or sooner. For more information, please contact foil@vpgsensors.com  For better performances please review Z201 and S102C Series datasheets T 5.8 ± 0.5 5.5 ± 1 2.2 ± 0.5 (0.228 ± 0.02) (0.216 ± 0.04) (0.086 ± 0.02) 6.7 ± 0.5 8±1 2.78 ± 0.5 (0.263 ± 0.02) (0.315 ± 0.04) (0.110 ± 0.02) LS 5.08 ± 0.25 (0.200 ± 0.01) 3.81 ± 0.25 (0.150 ± 0.01) 5.08 ± 0.25 (0.200 ± 0.01) 3.81 ± 0.25 (0.150 ± 0.01)          Automatic test equipment (ATE) High precision instrumentation Laboratory, industrial and medical Audio EB applications (electron beam scanning and recording equipment, electron microscopes) Commercial aviation Airborne Down hole instrumentation Communication Note • Letters H and C indicate a difference in lead spacing and -2 is an extension range Document Number: 63087 Revision: 3-Mar-15 For any questions, contact foil@vpgsensors.com www.vishayfoilresistors.com 1 VSH, VSC TABLE 1 - TOLERANCE AND TCR VS. RESISTANCE VALUE (- 55 °C to + 125 °C, + 25 °C Ref.) RESISTANCE VALUE () TYPICAL TCR AND MAX. SPREAD (ppm/°C) TOLERANCE (%) VSH2 VSC2 60K to 120K ± 2 ± 4.5 ± 0.01 % VSH1 VSC1 80 to < 60K ± 2 ± 4.5 ± 0.01 % VSH1 VSC1 50 to < 80 ± 2 ± 5.5 ± 0.02 % VSH1 VSC1 5 to < 50 ± 2 ± 6.5 ± 0.05 % RESISTOR TABLE 2 - PERFORMANCE SPECIFICATIONS TEST Moisture Resistance CONDITIONS R (%) - TYPICAL R (%) - MAXIMUM MIL-STD-202, method 106 ± 0.005 ± 0.03 Pressure Cooker Test 2 atmospheres absolute pressure, 121 °C, 100 % R.H. for 100 h ± 0.2 ± 0.4 Short Time Overload 6.25 x Pnom, 5 s ± 0.005 ± 0.05 + 260 °C, 20 s ± 0.01 ± 0.03 Resistance to Solder Heat 2 lbs, 10 s ± 0.0025 ± 0.03 Insulation Resistance Terminal Strength DC 100 V, 2 min > 10 000M > 10 000M Dielectric Withstanding Voltage AC 300 V, 1 min ± 0.0025 ± 0.03 - 65 °C to + 150 °C, 5 cycles ± 0.01 ± 0.02 Shock Thermal Shock MIL-STD-202, method 213, condition I ± 0.005 ± 0.03 Vibration MIL-STD-202, method 204, condition D ± 0.01 ± 0.03 0.3 W, + 70 °C, 2000 h ± 0.01 ± 0.015 - 0.07 µV/°C 0.1 µV/°C Load Life Stability Thermal EMF Quan-Tech - 42 dB - 32 dB 24 h at - 65 °C ± 0.005 ± 0.01 Low Temperature Operation 45 min at - 65 °C ± 0.005 ± 0.01 High Temperature Exposure + 150 °C ± 0.01 ± 0.03 Low Temperature Storage FIGURE 2 - TRIMMING TO VALUES (Conceptual Illustration) FIGURE 3 - POWER DERATING CURVE Current Path Before Trimming Interloop Capacitance Reduction in Series Current Path After Trimming Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance Mutual Inductance Reduction due to Change in Current Direction Percent of Rated Power Current Noise + 70 °C 100 75 50 25 0 - 75 - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 Ambient Temperature (°C) Note: Foil shown in black, etched spaces in white www.vishayfoilresistors.com 2 For any questions, contact foil@vpgsensors.com Document Number: 63087 Revision: 3-Mar-15 VSH, VSC TABLE 3 - GLOBAL PART NUMBER INFORMATION (1) NEW GLOBAL PART NUMBER: Y090212K7560T9L (preferred part number format) DENOTES PRECISION VALUE CHARACTERISTICS Y R =  K = k 0 = standard 9 = lead (Pb)-free 1 to 999 = custom Y 0 9 0 2 1 2 K 7 5 6 0 T 9 L PRODUCT CODE RESISTANCE TOLERANCE PACKAGING 0875 = VSH1 0902 = VSC1 0934 = VSH2 0903 = VSC2 T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.10 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % L = bulk FOR EXAMPLE: ABOVE GLOBAL ORDER Y0902 12K7560 T 9 L: TYPE: VSC1 VALUES: 12.7560 k ABSOLUTE TOLERANCE: 0.01 % TERMINATION: lead (Pb)-free PACKAGING: bulk HISTORICAL PART NUMBER: VSC1 T 12K756 T B (will continue to be used) VSC1 T 12K756 T B MODEL TERMINATION RESISTANCE VALUE TOLERANCE PACKAGING VSH1 VSC1 VSH2 VSC2 T = lead (Pb)-free None = tin/lead alloy 12.756 k T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.10 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % B = bulk Note (1) For non-standard requests, please contact application engineering. Document Number: 63087 Revision: 3-Mar-15 For any questions, contact foil@vpgsensors.com www.vishayfoilresistors.com 3 Legal Disclaimer Notice Vishay Precision Group, Inc. Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. You should ensure you have the current version of the relevant information by contacting VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of VPG. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale. Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Copyright Vishay Precision Group, Inc., 2014. All rights reserved. Document No.: 63999 Revision: 15-Jul-2014 www.vpgsensors.com 1