VCS331, VCS332
Vishay Foil Resistors
Bulk Metal® Foil Technology High Precision 4-Terminal Power
Current Sensing Resistors with TCR as low as ± 1 ppm/°C Maximum,
Tolerance ± 0.1 % and Rise Time 1.0 ns Effectively No Ringing
FEATURES
PR
O
DU
CT
Temperature coefficient of resistance (TCR):
INTRODUCTION
The VCS331 and VCS332 offer precision Bulk Metal® Foil
technology resistors as low as 0.25 with a temperature
coefficient down to 1 ppm/°C maximum and unmatched long
term stability. The 4 terminal current sensing resistors, when
mounted on a heat sink, can sustain 10 W continuously
without an appreciable change in resistance (0.15 %
maximum). The typical 50 % power derating specification
associated with other technologies is not necessary. A
choice of lead configurations is available.
IM
PR
O
VE
D
Our application engineering department is available to
advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us.
down to ± 1 ppm/°C max. (see table 2)
Tolerance: to ± 0.1 % (see table 1)
Power rating (heat-sinked): 10 W
Load life stability: ± 0.01 % (100 ppm) at 25 °C,
2000 h at rated power
Resistance range: 0.25 to 500
Vishay Foil resistors are not restricted to standard
values; specific “as required” values can be supplied
at no extra cost or delivery (e.g. 1R2345 vs. 1R)
Electrostatic discharge (ESD) up to 25 000 V
Non-inductive, non-capacitive design
Rise time: 1.0 ns effectively no ringing
Current noise: 0.010 µVRMS/V of applied voltage (< - 40 dB)
Thermal EMF: 0.05 µV/°C typical
Voltage coefficient: < 0.1 ppm/V
Non-inductive: 0.08 µH
Non hot spot design
Thermal stabilization time < 1 s (nominal value achieved
within 10 ppm of steady state value)
Terminal finish: lead (Pb)-free or tin/lead alloy
Prototype quantities available in just 5 working days
or sooner. For more information, please contact
foil@vishaypg.com
For better performances, please contact application
engineering
TABLE 1 - CHARACTERISTICS
MODEL NUMBER
RESISTANCE RANGE
BEST TOLERANCE (1)
POWER RATING (2)
at + 25 °C
MAXIMUM CURRENT (2)
VCS331, VCS332
0.25 < R < 500
± 0.1 %
10 W on heat sink (3)
or 3 W in free air
5A
Notes
(1) Tighter tolerance is available - for more details contact application engineering
(2) The lower of the two limitations (power or current) is decisive
(3) Heatsink - aluminum (6" length x 4" width x 2" height x 0.04" thick)
TABLE 2 - TCR CHART (maximum)
FIGURE 1 - POWER DERATING CURVE
- 55 °C
(0 °C TO + 60 °C)
to
很抱歉,暂时无法提供与“Y09601R00000D0L”相匹配的价格&库存,您可以联系我们找货
免费人工找货