Y11699K70000T0L

SMR1D/SMR3D Vishay Foil Resistors High Precision Bulk Metal® Foil Molded Surface Mount Resistor with TCR down to ± 2 ppm/°C, Flexible Terminations, and Load Life Stability of ± 0.005 % (50 ppm) FEATURES INTRODUCTION The SMRxD is a precision molded surface mountable resistor offering all the elements of precision; including low TCR, tight tolerance, long term stability, low noise, low thermal EMF, and non-measurable voltage coefficient. It utilizes the Bulk Metal® Foil technology for the resistive element with its inherent low and predictable TCR and long term stability. This surface mountable product affords similar performance to the time tested S series molded through-hole product. The flexible terminations of this product also reduce stress transference from the PCB to the resistor. Voltage division with tight tracking < 3 ppm/°C can be achieved with 2 randomly selected units even with a large ratio between the two values. Our Application Engineering Department is available to advise and make recommendations. For non-standard technical requirements and special applications, please contact us. TABLE 1 - THE SMRxD SERIES IS LISTED IN THE FOLLOWING DSCC SPECIFICATIONS MODEL DSCC MIL SPEC SMR1D 06020 MIL-PRF-55182 SMR3D 06021 MIL-PRF-55182 APPLICATIONS        Military, airborne and space Precision amplifiers High precision instrumentation Medical Automatic test equipment (ATE) Industrial Audio (high end stereo Vin equipment)  EB application  Pulse application  Measurement instrumentation TABLE 2 - TOLERANCE AND TCR VERSUS RESISTANCE VALUE (- 55 °C to + 125 °C, + 25 °C ref.) VALUE STANDARD TOLERANCE1) TYPICAL TCR AND MAX. SPREAD1) (ppm/°C) 50  to 80 k ± 0.01 % ±2±3 20  to < 50  ± 0.02 % ±2±4 10  to < 20  ± 0.05 % ±2±6 5  to < 10  ± 0.1 % ±2±8 Note 1. Tighter performances are available R2 R1 - Vout + SMRxD FIGURE 1 - POWER DERATING CURVE 200 Percent of Rated Power (%) Any value at any tolerance available within resistance range  Temperature coefficient of resistance (TCR): ± 2 ppm°C typical (- 55 °C to + 125 °C, + 25 °C ref.)  Tolerance: to ± 0.01 %  Flexible terminations ensure minimal stress transference from the PCB due to a difference in thermal coefficient of expansions (TCE)  Electrostatic discharge (ESD) above 25 000 V  Load life stability: ± 0.005 % (70 °C, 2000 h at rated power)  Resistance range: 5  to 80 k (for higher and lower values, please contact us)  Power rating: to 600 mW at 70 °C  Non inductive, non capacitive design  Current noise: - 40 dB  Voltage coefficient: < 0.1 ppm/V  Non inductive: < 0.08 µH  Non hot spot design  Terminal finishes available: lead (Pb)-free tin/lead alloy  Matched sets with TCR tracking are available upon request  Any value available within resistance range (e.g. 1K234)  Prototype samples available from 48 h. For more information, please contact foil@vishaypg.com  For better performances please review SMRxDZ datasheet - 55 °C + 70 °C 175 150 125 100 75 50 25 0 - 75 - 25 + 25 + 75 + 125 Ambient Temperature (°C) + 175 * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 63102 Revision: 23-Mar-10 For any questions, contact: foil@vishaypg.com www.foilresistors.com 1 SMR1D/SMR3D Vishay Foil Resistors TABLE 3 - PERFORMANCE SPECIFICATIONS TEST MAXIMUM LIMIT1) CONDITIONS SMR1D SMR3D Resistance Range Rated Power 10 k to 33 k 5  to 10 k 0.250 W at 70 °C 0.160 W at 70 °C 0.125 W at 125 °C 0.08 W at 125 °C 5  to 30 k 0.6 W at 70 °C 0.3 W at 125 °C 30 k to 80 k 0.4 W at 70 °C 0.2 W at 125 °C Maximum Working Voltage Maximum Operating Temperature Working Temperature Range Thermal Shock Short Time Overload Dielectric Withstanding Voltage High Temperature Exposure 180 V ± 0.01 % (100 ppm) 6.25 x rated power; 5 s ± 0.01 % (100 ppm) 24 h at - 65 °C ± 0.01 % (100 ppm) 45 min, rated power at - 65 °C ± 0.01 % (100 ppm) atmospheric pressure; AC 200 V; 1 min ± 0.01 % (100 ppm) DC 100 V; 1 min over 10 000 260 °C; 10 s ± 0.02 %, ± 0.01 % typical + 65 °C to - 10 °C; 90 % to 98 % RH; rated power; 240 h ± 0.02 % (200 ppm) 100 G; sawtooth ± 0.01 % (100 ppm) 10 ~ 2000 ~ 10 Hz; 20 G; Y, Z each 4 h ± 0.01 % (100 ppm) 0.04 W at + 70 °C 0.25 W at + 70 °C 0.125 W at + 125 °C 0.1 W at + 70 °C 0.6 W at + 70 °C 0.3 W at + 125 °C 175 °C; no load 2000 h Weight Packaging see figure 1 - 65 °C to + 150 °C; 30 min; 5 cycles Shock Load Life Stability (2000 h) 5  to 80 k - 55 °C to + 125 °C (MIL range) Resistance to Soldering Heat (%) Vibration, High Frequency 5  to 33 k + 175 °C (see figure 1) Insulation Resistance (M) Moisture Resistance SMR3D 73 V Low Temperature Storage Low Temperature Operation SMR1D Typical 0.005 % 0.02 % 0.02 % Typical 0.005 % 0.015 % 0.015 % ± 0.05 % (500 ppm) 0.1143 g 0.244 g bulk (loose) or tape and reel, per EIA-481-1 Note 1. As shown + 0.01  to allow for measurement error at low values www.foilresistors.com 2 For any questions, contact: foil@vishaypg.com Document Number: 63102 Revision: 23-Mar-10 SMR1D/SMR3D Vishay Foil Resistors FIGURE 2 - DIMENSIONS in inches (millimeters) Side View L TH Minimum VALUE (5 DIGITS) Top View P P H 100R0T V End View Stand Off TOLERANCE W - (DATE CODE) TW Bottom View LEAD (Pb)-FREE INDICATOR MODEL L W H P TW TH (minimum) SMR1D 0.236 ± 0.012 (5.99 ± 0.30) 0.126 ± 0.012 (3.20 ± 0.30) 0.098 ± 0.012 (2.49 ± 0.30) 0.051 ± 0.012 (1.30 ± 0.30) 0.087 ± 0.004 (2.21 ± 0.10) 0.039 (0.99) SMR3D 0.287 ± 0.012 (7.29 ± 0.30) 0.170 ± 0.012 (4.32 ± 0.30) 0.110 ± 0.012 (2.79 ± 0.30) 0.051 ± 0.012 (1.30 ± 0.30) 0.095 ± 0.004 (2.41 ± 0.10) 0.039 (0.99) FIGURE 3 - RECOMMENDED MOUNTING PAD GEOMETRIES in inches (millimeters) Reflow Solder Pads D C B E A MODEL METHOD A MIN. B REF C REF D ± 0.04 (± 1.02) E REF SMR1D Reflow 0.110 (2.79) 0.106 (2.69) 0.124 (3.15) 0.337 (8.55) 0.050 (1.27) SMR3D Reflow 0.118 (3.00) 0.106 (2.69) 0.175 (4.45) 0.388 (9.86) 0.050 (1.27) Per IPC-SM-782 Rev. A FIGURE 4 - TRIMMING TO VALUES (conceptual illustration) FIGURE 5 - TYPICAL TCR CURVE (for more details, see table 2) + 150 + 100 Current Path Before Trimming Interloop Capacitance Reduction in Series Current Path After Trimming Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance Mutual Inductance Reduction due to Change in Current Direction + 50 ΔR R (ppm) 0 - 50 - 100 ± 2 ppm/°C (+ 25 °C Reference) - 150 - 200 - 50 - 55 NOTE: Foil shown in black, etched spaces in white - 25 0 + 25 + 50 + 75 + 100 + 125 Ambient Temperature (°C) Note: The TCR values for < 80  are influenced by the termination composition and the result in deviation from this curve Document Number: 63102 Revision: 23-Mar-10 For any questions, contact: foil@vishaypg.com www.foilresistors.com 3 SMR1D/SMR3D Vishay Foil Resistors TABLE 4 - GLOBAL PART NUMBER INFORMATION NEW GLOBAL PART NUMBER: Y112110K0000T9R (preferred part number format) DENOTES PRECISION VALUE R= K = k Y Y 1 AER* 1 2 1 1 0 0 = standard 9 = lead (Pb)-free 1 to 999 = custom K 0 0 PRODUCT CODE RESISTANCE TOLERANCE 1121 = SMR1D 1169 = SMR3D T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % 0 0 T 9 R PACKAGING L = bulk pack R = tape and reel FOR EXAMPLE: ABOVE GLOBAL ORDER Y1121 10K0000 T 9 R: TYPE: SMR1D VALUE: 10.0 k ABSOLUTE TOLERANCE: ± 0.01 % TERMINATION: lead (Pb)-free PACKAGING: tape and reel HISTORICAL PART NUMBER: SMR1D 10K000 TCR2 T S T (will continue to be used) SMR1D 10K000 TCR2 T S T MODEL OHMIC VALUE TCR CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING SMR1D SMR3D 10.0 k S = lead (Pb)-free B = tin/lead B = bulk pack T = tape and reel T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % Note * For non-standard requests, please contact application engineering. www.foilresistors.com 4 For any questions, contact: foil@vishaypg.com Document Number: 63102 Revision: 23-Mar-10 Legal Disclaimer Notice Vishay Precision Group Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of Vishay Precision Group. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document No.: 63999 Revision: 27-Apr-2011 www.vishaypg.com 1