Y1184157K000B0L

E102 Vishay Foil Resistors High Precision Bulk Metal® Foil Extended Value Range Resistor, with TCR of 2 ppm/°C, Tolerance to 0.005 %, and Power Rated at 0.6 W FEATURES Any value available within resistance range Bulk Metal® foil (BMF) technology outperforms all other resistor technologies available today for applications that require high precision and high stability. This technology has been pioneered and developed by VISHAY, and products based on this technology are the most suitable for a wide range of applications. BMF technology allows us to produce customer orientated products, designed to satisfy challenging and specific technical requirements. The E102C (0.150" lead spacing) and E102J (0.200" lead spacing) extends the range of the high precision aerospace and instrumentation standard S102C/J from 150K to 300K. Our application engineering department is available to advise and to make recommendations. For non-standard technical requirements and special applications, please contact us. FIGURE 1 - TYPICAL TCR CURVE • Temperature coefficient of resistance (TCR): - 55 °C to + 125 °C, + 25 °C ref. 2 ppm/°C typical • Rated power: to 0.3 W at + 125 °C • Tolerance: ± 0.005 % • Load life stability: to ± 0.005 % at 70 °C, 2000 h at rated power • Resistance range: 150 kΩ to 300 kΩ (higher and lower values of resistance are available) • Electrostatic discharge (ESD) above 25 000 V • Non inductive, non capacitive design • Rise time: 1 ns without ringing • Current noise: < - 40 dB • Thermal EMF: 0.05 µV/°C typical • Voltage coefficient < 0.1 ppm/V • Low inductance: < 0.08 µH typical • Non hot spot design • Terminal finishes available: lead (Pb)-free tin/lead alloy • Matched sets are available on request (TCR tracking: to 0.5 ppm/°C) • For better TCR and PCR performances please review the E102Z datasheet FIGURE 2 - POWER DERATING CURVE + 150 + 100 ΔR + 50 R (ppm) 0 - 50 - 100 - 150 ± 2 ppm/°C (+ 25 °C Reference) - 200 - 50 - 55 - 25 0 + 20 + 50 + 75 + 100 Ambient Temperature (°C) + 125 Percent of Rated Power at + 125 °C 200 % - 55 °C + 70 °C Double Rated Power 175 % 150 % 125 % Rated Power 100 % 75 % 50 % 25 % 0 - 75 - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 + 200 Ambient Temperature (°C) TABLE 1 - E102 SPECIFICATIONS Stability Load life at 2000 h Load life at 10 000 h Current Noise High Frequency Operation Rise time Inductance (L) Capacitance (C) Voltage Coefficient Thermal EMF Document Number: 63066 Revision: 25-Mar-10 ± 0.005 % maximum ΔR at 0.1 W/+ 70 °C ± 0.015 % maximum ΔR at 0.3 W/+ 125 °C ± 0.01 % maximum ΔR at 0.05 W/+ 125 °C ± 0.05 % maximum ΔR at 0.3 W/+ 125 °C < - 40 dB 1.0 ns 0.1 µH maximum; 0.08 µH typical 1.0 pF maximum; 0.5 pF typical < 0.1 ppm/V 0.1 µV/°C maximum; 0.05 µV/°C typical For any questions, contact: foil@vishaypg.com www.foilresistors.com 1 E102 Vishay Foil Resistors FIGURE 3 - TRIMMING TO VALUES (Conceptual Illustration) FIGURE 4 - STANDARD IMPRINTING AND DIMENSIONS Front View 0.235 (5.97) 0.365 (9.27) Rear View Optional Customer P/N Print spec., etc. if required Date Code 0.380 (9.65) Current Path Before Trimming Interloop Capacitance Reduction in Series VISHAY XXXX E102J XXXXXX 200K00 0.01 % Resistance Value Code Tolerance 0.020 (0.51) 0.075 (1.91) Min. Current Path After Trimming Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance Mutual Inductance Reduction due to Opposing Current in Adjacent Lines Model Number 0.200 (5.08) ø 0.025 (0.64) #22 AWG Lead Material - Solder Coated Copper Tolerance: ± 0.010 (0.25) E102C, E102K lead spacing = 0.150" (3.81) E102J, E102L lead spacing = 0.200" (5.08) The E102C, E102J use the S102C series chip. The E102K, E102L use the S102K series chip. (numbers in parentheses indicate millimeters). Note: Foil shown in black, etched spaces in white TABLE 2 - GLOBAL PART NUMBER INFORMATION NEW GLOBAL PART NUMBER: Y1186150K000T9L (preferred part number format) DENOTES PRECISION VALUE AER* Y K = kΩ 0 = standard part, tin/lead termination 9 = standard part, lead (Pb)-free termination 1 - 999 = custom Y 1 1 8 6 1 5 0 K 0 0 0 T 9 PRODUCT CODE RESISTANCE TOLERANCE PACKAGING 1186 = E102C 1184 = E102J 1187 = E102K 1185 = E102L V = ± 0.005 % T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % L = bulk pack L FOR EXAMPLE: ABOVE GLOBAL ORDER Y1186 150K000 T 9 L: TYPE: E102C VALUE: 150.0 kΩ ABSOLUTE TOLERANCE: ± 0.01 % TERMINATION: lead (Pb)-free PACKAGING: bulk pack HISTORICAL PART NUMBER: E102C T 150K00 T B (will continue to be used) E102C T 150K00 T B MODEL TERMINATION OHMIC VALUE RESISTANCE TOLERANCE PACKAGING E102C E102J E102K E102L T = lead (Pb)-free None = tin/lead alloy 150K00 = 150.0 kΩ V = ± 0.005 % T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % B = bulk pack Note * Application engineering release: for non-standard requests, please contact application engineering. www.foilresistors.com 2 For any questions, contact: foil@vishaypg.com Document Number: 63066 Revision: 25-Mar-10 Legal Disclaimer Notice Vishay Precision Group Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of Vishay Precision Group. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document No.: 63999 Revision: 27-Apr-2011 www.vishaypg.com 1