Y1685V0001TT0R

VFCD1505 (Z-Foil) Vishay Foil Resistors High Precision Bulk Metal® Foil Surface Mount Voltage Divider, TCR Tracking of < 0.5 ppm/°C, Tolerance Match of 0.01 % and Stability of ± 0.005 % (50 ppm) FEATURES Bottom View INTRODUCTION Bulk Metal® Z-Foil (BMZF) technology out-performs all other resistor technologies available today for applications that require ultra high precision and ultra high stability. The new Z-Foil technology provides a significant reduction of the resistive element’s sensitivity to changes of temperature due to ambient temperature variations (TCR) and to self heating when power is applied (power coefficient). Model VFCD1505 offers low TCR (both absolute and tracking), excellent load life stability, tight tolerance, excellent ratio stability, low thermal EMF and low current noise, all in one package. 0.05 ppm/°C absolute TCR removes errors due to temperature gradients. The VFCD1505 surface mount divider provides tight tolerance matching and TCR tracking between 2 resistors simultaneously etched on one piece of foil on a common substrate. The electrical specifications of this integrated construction offers improved performances and better real estate utilization over discrete resistors and matched pairs. Our application engineering department is available to advise and make recommendations for non-standard technical requirements and special applications, please contact us. Percent of Rated Power FIGURE 1 - POWER DERATING CURVE + 70 °C - 55 °C 100 75  Temperature coefficient of resistance (TCR): absolute: (table 1) ± 0.05 ppm/°C (typical 0 °C to + 60 °C) ± 0.2 ppm/°C (typical - 55 °C to + 125 °C, + 25 °C ref.) Tracking: (table 1) 0.1 ppm/°C typical  Resistance range: 1K to 10K  Foil resistors are not restricted to standard values/ ratios, specific “as required” values/ratios may be supplied at no extra cost or delivery (e.g 2K234/5K456)  Power coefficient tracking: ”R due to self heating” 5 ppm at rated power  Short time overload: ± 0.005 %  Tolerance: absolute and resistance ratio: to 0.01 %  Load life stability (0.1 W at 70 °C, 2000 h) Absolute: 0.01 % Ratio: 0.005 %  Electrostatic discharge (ESD) up to 25 000 V  Power rating at 70 °C: entire package: 0.1 W, divided between the two resistors proportionally to their value  Non-inductive, non-capacitive design  Thermal EMF: 0.05 µV/°C typical  Current noise: < - 40 dB  Rise time: 1 ns effectively no ringing  Non inductive: < 0.08 µH  Voltage coefficient: < 0.1 ppm/V  Non hot spot design  Compliant to RoHS directive 2002/95/EC  Terminal finish: lead (Pb)-free or tin/lead alloy  For better performances please contact us  Prototypes quantities available in just 5 working days or sooner. For more information, please contact foil@vishaypg.com 50 25 0 - 75 APPLICATIONS - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 Ambient Temperature (°C) FIGURE 2 -SCHEMATIC R1 R2        Instrumentation amplifiers Bridge networks Differential amplifiers Ratio arms in bridge circuits Medical and test equipment Military Airborne etc. R2 R1 Vin Vout + VFCD1505 * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 63109 Revision: 25-Mar-10 For any questions, contact: foil@vishaypg.com www.foilresistors.com 1 VFCD1505 (Z-Foil) Vishay Foil Resistors TABLE 1 - RESISTANCE VALUES/RATIO AND TCR CHARACTERISTICS POPULAR VALUES ABSOLUTE TCR (- 55 °C TO + 125 °C, + 25 °C REF.) VCODES 10K/10K V0001 5K/5K V0002 1K/1K V0004 2K/2K V0059 5K/10K V0005 2.5K/10K V0060 1K/9K V0056 1K/10K V0064 TCR TRACKING TOLERANCE MATCHING TYPICAL MAXIMUM TYPICAL MAXIMUM ± 0.2 ppm/°C ± 1 ppm/°C 0.1 ppm/°C 0.5 ppm/°C 0.01 % ± 0.2 ppm/°C ± 1 ppm/°C 0.4 ppm/°C 1.0 ppm/°C 0.01 % ± 0.2 ppm/°C ± 1 ppm/°C 0.4 ppm/°C 1.0 ppm/°C 0.02 % Note • Additional ratios are available. For the relevant VCODES for ordering, please contact application engineering using the footer below TABLE 2 - TYPICAL PERFORMANCE SPECIFICATIONS MIL-PRF-55342H CHARACTERISTIC E R LIMITS (1) VFCD1505 RATIO Thermal shock 0.10 % 0.005 % (50 ppm) Low temperature operation 0.10 % 0.005 % (50 ppm) Short time overload 0.10 % 0.005 % (50 ppm) High temperature exposure 0.10 % 0.01 % (100 ppm) TEST Resistance to soldering heat 0.20 % 0.01 % (100 ppm) Moisture resistance 0.20 % 0.005 % (50 ppm) Load life (ratio stability) - 0.005 % (50 ppm) Maximum working voltage for each element 22 V Weight 10 mg Packaging Waffle pack standard, tape and reel available Note (1) R’s plus additional 0.01  for measurement error FIGURE 3 - MODEL VFCD1505 DIMENSIONS AND LAND PATTERN in inches (millimeters) CHIP (BOTTOM VIEW) D RECOMMENDED LAND PATTERN D D W1 W X S L1 S G L Z L W D L1 W1 ± 0.005 ± 0.005 ± 0.003 ± 0.003 ± 0.005 (0.13) (0.13) (0.08) (0.08) (0.13) 0.150 (3.81) 0.050 (1.27) 0.015 (0.38) 0.144 (3.66) 0.043 (1.09) THICKNESS MAXIMUM Z G S X ± 0.003 ± 0.003 ± 0.003 ± 0.003 (0.08) (0.08) (0.08) (0.08) 0.025 (0.64) 0.147 (3.73) 0.111 (2.82) 0.046 (1.17) 0.046 (1.17) Notes • Avoid the use of cleaning agents which could attack epoxy resins, which form part of the resistor construction • Vacuum pick up is recommended for handling • Soldering iron is not applicable www.foilresistors.com 2 For any questions, contact: foil@vishaypg.com Document Number: 63109 Revision: 25-Mar-10 VFCD1505 (Z-Foil) Vishay Foil Resistors FIGURE 5 - TYPICAL RESISTANCE/ TEMPERATURE CURVE (for more details see table 1) FIGURE 4 - TRIMMING TO VALUES (conceptual illustration) + 500 + 400 Current Path Before Trimming Interloop Capacitance Reduction in Series + 300 + 200 + 100 DR 0 R (ppm) - 100 Current Path After Trimming Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance Mutual Inductance Reduction due to Opposing Current in Adjacent Lines 0.05 ppm/°C - 200 - 0.1 ppm/°C 0.1 ppm/°C - 300 0.14 ppm/°C - 400 0.2 ppm/°C - 0.16 ppm/°C - 500 - 55 0 - 25 Note: Foil shown in black, etched spaces in white + 25 + 60 + 75 + 100 + 125 Ambient Temperature (°C) TABLE 3 - GLOBAL PART NUMBER INFORMATION (1) NEW GLOBAL PART NUMBER: Y1685V0001QQ9R (preferred part number format) DENOTES PRECISION VCODE (2) TOLERANCE MATCH Y RESISTANCE VALUE CODE T = 0.01 % Q = 0.02 % A = 0.05 % Y 1 6 8 5 PRODUCT CODE V 0 0 0 PACKAGING R = tape and reel W = waffle pack 1 Q ABSOLUTE TOLERANCE 1685 = VFCD1505 Q 9 R CHARACTERISTICS T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % 0 = standard product, tin/lead terminations 9 = standard product, lead (Pb)-free terminations Other = custom FOR EXAMPLE: ABOVE GLOBAL ORDER Y1685 V0001 Q Q 9 R: TYPE: VFCD1505 VALUES: 10K/10K ABSOLUTE TOLERANCE: ± 0.02 % TOLERANCE MATCH: 0.02 % TERMINATION: lead (Pb)-free PACKAGING: tape and reel HISTORICAL PART NUMBER: VFCD1505 10K/10K TCR0.2 Q Q S T (will continue to be used) VFCD1505 10K/10K TCR0.2 Q Q S T MODEL OHMIC VALUE TCR CHARACTERISTIC ABSOLUTE TOLERANCE TOLERANCE MATCH TERMINATION PACKAGING VFCD1505 R1 = 10 k R2 = 10 k T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % T = 0.01 % Q = 0.02 % A = 0.05 % S = lead (Pb)-free B = tin/lead alloy T = tape and reel W = waffle pack Notes (1) Application engineering release: for non-standard requests, please contact application engineering (2) For examples of VCODES see table 1 Document Number: 63109 Revision: 25-Mar-10 For any questions, contact: foil@vishaypg.com www.foilresistors.com 3 Legal Disclaimer Notice Vishay Precision Group, Inc. Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. You should ensure you have the current version of the relevant information by contacting VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of VPG. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale. Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Copyright Vishay Precision Group, Inc., 2014. All rights reserved. Document No.: 63999 Revision: 15-Jul-2014 www.vpgsensors.com 1