Y2123100R000B9L

VPR221SZ (Z-Foil) Vishay Foil Resistors Ultra High Precision Bulk Metal® Z-Foil Surface Mount Power Resistor in TO-220 Configuration with TCR of ± 0.05 ppm/°C, PCR of 4 ppm/W and Load Life Stability of ± 0.005 % (50 ppm) FEATURES  Temperature coefficient of resistance (TCR):       INTRODUCTION The Z-Foil technology provides a significant reduction of the resistive component’s sensitivity to ambient temperature variations (TCR) and applied power changes (PCR). Model VPR221SZ is a 4 lead kelvin connected surface mount device which provides high rated power, excellent load life stability, low temperature coefficient (TCR) and low power coefficient (PCR) - all in one resistor. ± 0.05 ppm/°C absolute TCR removes error due to temperature gradients. By taking advantage of the overall stability and reliability of Bulk Metal® Z-Foil resistors, designers can significantly reduce circuit errors and greatly improve overall circuit performances.               Our application engineering department is available to advise and make recommendations. For non-standard technical requirements and special applications, please contact us. ± 0.05 ppm/°C typical (0 °C to + 60 °C) ± 0.2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C ref.) (see table 1) Tolerance: to ± 0.01 % Power coefficient “R due to self heating”: 4 ppm/W typical Rated power: 8 W chassis mounted (MIL-PRF-39009) Load life stability: to ± 0.005 % at 25 °C for 2000 h, at 1.5 W Resistance range: 0.5  to 500  Foil resistors are not restricted to standard values; specific “as requested” values can be supplied at no extra cost or delivery (e.g. 100R2345 vs. 100R) Electrostatic discharge (ESD) up to 25 000 V Short time overload  0.001 % (10 ppm) Non-inductive, non-capacitive design Rise time: 1 ns effectively no ringing Current noise: 0.010 µVRMS/V of applied voltage (< - 40 dB) Thermal EMF: 0.05 µV/°C typical Voltage coefficient < 0.1 ppm/V Non-inductive: < 0.08 µH Non hot spot design Thermal stabilization time < 1 s (nominal value achieved within 10 ppm of steady state value) Terminal finish: lead (Pb)-free or tin/lead alloy Compliant to RoHS directive 2002/95/EC Prototype quantities available in just 5 working days or sooner. For more information, please contact foil@vishaypg.com For better performances please contact us FIGURE 1 - SCHEMATICS R I I1 E1 TIGHTEST RESISTANCE TOLERANCE TYPICAL TCR AND MAX. SPREAD (1) 0.5 to < 1 ± 0.05 % ± 0.2 ppm/°C ± 2.8 ppm/°C 1 to < 10 ± 0.02 % ± 0.2 ppm/°C ± 2.3 ppm/°C 10 to 500 ± 0.01 % ± 0.2 ppm/°C ± 1.8 ppm/°C E2 I2 V TABLE 1 - TCR AND TOLERANCE FIGURE 2 - POWER DERATING CURVE - 55 °C 100 Notes (1) MIL-range (- 55 °C to + 125 °C, + 25 °C ref.) • Contact applications engineering for other available values Percent of Rated Power RESISTANCE RANGE () I 75 50 25 0 - 75 - 50 - 25 0 25 50 75 100 125 150 Ambient Temperature (°C) * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 63127 Revision: 16-Aug-12 For any questions, contact: foil@vishaypg.com www.foilresistors.com 1 VPR221SZ (Z-Foil) Vishay Foil Resistors FIGURE 3 - TRIMMING TO VALUES (conceptual illustration) FIGURE 4 - TYPICAL RESISTANCE/ TEMPERATURE CURVE (for more details see table 1) TCR Chord Slopes for Different Temperature Ranges + 500 Interloop Capacitance Reduction in Series Current Path Before Trimming + 400 + 300 + 200 Current Path After Trimming Mutual Inductance Reduction due to Opposing Current in Adjacent Lines Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance + 100 ΔR 0 R (ppm) - 100 0.05 ppm/°C - 200 - 0.1 ppm/°C 0.1 ppm/°C - 300 0.14 ppm/°C - 400 - 0.16 ppm/°C 0.2 ppm/°C - 500 Note: Foil shown in black, etched spaces in white - 55 - 25 0 + 25 + 60 + 75 + 100 + 125 Ambient Temperature (°C)  FIGURE 5 - VPR221SZ FORMING  DIMENSIONS in inches (millimeters) FIGURE 6 - VPR221SZ DIMENSIONS in inches (millimeters) 0.365 (9.27) Ref. 0.400 ± 0.010 (10.16 ± 0.25) 0.015 ± 0.002 (0.38 ± 0.05) 0.150 ± 0.008 (3.81 ± 0.20) 0.078 ± 0.005 (1.98 ± 0.13) 0.050 ± 0.005 (1.27 ± 0.13) 0.150 ± 0.008 (3.81 ± 0.20) 0.115 ± 0.005 (2.92 ± 0.13) 0.245 ± 0.010 (6.22 ± 0.25) Before Forming VFR VPR221SZ 1R0 1 % 0101 0.141 ± 0.005 Dia. (3.58 ± 0.13) 0.200 ± 0.030 (5.08 ± 0.76) 0.695 ± 0.010 (17.65 ± 0.25) 0.110 (2.79) Ref. 0.050 ± 0.005 (1.27 ± 0.13) 0.540 ± 0.040 (13.72 ± 1.02) 0.030 ± 0.002 (0.76 ± 0.05) 0.090 (2.286) Ref. 0.090 ± 0.010 (2.29 ± 0.25) Heat Sink After Forming Flush with Heat Sink Within ± 0.002 (± 0.05) I1 E1 E2 I2 0.050 ± 0.005 (1.27 ± 0.13) 0.615 Max. (15.62) 0.015 ± 0.002 (0.38 ± 0.05) 0.078 ± 0.005 (1.98 ± 0.13) 0.100 ± 0.005 (2.54 ± 0.13)  FIGURE 7 - LAND PATTERN DIMENSIONS in inches (millimeters) 0.050 ± 0.010 (1.27 ± 0.25) 0.120 ± 0.010 (3.05 ± 0.25) 0.10 ± 0.005 (2.54 ± 0.12) www.foilresistors.com 2 For any questions, contact: foil@vishaypg.com Document Number: 63127 Revision: 16-Aug-12 VPR221SZ (Z-Foil) Vishay Foil Resistors TABLE 2 - SPECIFICATIONS Power Rating at + 25 °C 8 W or 3 A (1) on heat sink (2) 1.5 W in free air Further derating not necessary. Current Noise < 0.010 µVRMS/V of applied voltage (- 40 dB) High Frequency Operation Rise Time Inductance (L) (3) Capacitance (C)  0.2 ns at 1 W 0.1 µH maximum: 0.03 µH typical 1.0 pF maximum: 0.5 pF typical Voltage Coefficient (4) < 0.1 ppm/V Operating Temperature Range - 55 °C to + 150 °C Maximum Working Voltage 300 V, not to exceed power rating Thermal EMF (5) 0.15 µV/°C maximum (lead effect) Weight 1.2 g maximum Notes (1) (2) (3) (4) (5) Whichever is lower Heat sink chassis dimensions are requirements per MIL-R-39009/1B: DIMENSIONS inches mm L 6.00 152.4 W 4.00 101.6 H 2.00 50.8 T 0.04 1.0 Inductance (L) mainly due to the leads The resolution limit of existing test requirement (within the measurement capability of the equipment, “essentially zero”) µV/°C relates to EMF due to lead temperature difference TABLE 3 - PERFORMANCE SPECIFICATIONS (1) MIL-PRF 39009 TEST OR CONDITION MIL-PRF 39009 TYPICAL R MAXIMUM R Low temperature storage 24 h at - 55 °C ± 0.3 % + 0.01  ± 0.001 % (10 ppm) ± 0.002 % (20 ppm) Dielectric withstanding voltage 300 VAC at Atm ± 0.2 % + 0.01  ± 0.001 % (10 ppm) ± 0.002 % (20 ppm) Dielectric withstanding voltage 200 VAC at Brm ± 0.2 % + 0.01  ± 0.001 % (10 ppm) ± 0.002 % (20 ppm) > 104 M Insulation resistance > 104 M Low temperature operation ± 0.3 % + 0.01  ± 0.002 % (20 ppm) ± 0.008 % (80 ppm) Short time overload 5 x rated power for 5 s (in air) ± 0.3 % + 0.01  ± 0.001 % (10 ppm) ± 0.002 % (20 ppm) Moisture resistance + 65 °C to - 10 °C, 90 RH to 98 RH, 10 days ± 0.5 % + 0.01  ± 0.005 % (50 ppm) ± 0.015 % (150 ppm) Terminal strength ± 0.2 % + 0.01  ± 0.001 % (10 ppm) ± 0.002 % (20 ppm) Load life 8 W at + 25 °C, 2000 h with heat sink ± 1.0 % + 0.01  ± 0.005 % (50 ppm) ± 0.015 % (150 ppm) Load life 1.5 W at + 25 °C for 2000 h in free air ± 1.0 % + 0.01  ± 0.005 % (50 ppm) ± 0.015 % (150 ppm) High temperature exposure + 150 °C ± 1.0 % + 0.05  ± 0.005 % (50 ppm) ± 0.01 % (100 ppm) Note (1) Measurement error ± 0.001 % Document Number: 63127 Revision: 16-Aug-12 For any questions, contact: foil@vishaypg.com www.foilresistors.com 3 VPR221SZ (Z-Foil) Vishay Foil Resistors TABLE 4 - GLOBAL PART NUMBER INFORMATION (1) NEW GLOBAL PART NUMBER: Y2123420R220T9L (preferred part number format) DENOTES PRECISION VALUE CHARACTERISTICS Y R= 0 = standard 9 = lead (Pb)-free 1 to 999 = custom Y 2 1 2 3 4 2 0 R PRODUCT CODE RESISTANCE TOLERANCE 2123 = VPR221SZ T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % 2 2 0 T 9 L PACKAGING L = bulk R = tape and reel FOR EXAMPLE: ABOVE GLOBAL ORDER Y2123 420R220 T 9 L: TYPE: VPR221SZ VALUE: 420.22  ABSOLUTE TOLERANCE: ± 0.01 % TERMINATION: lead (Pb)-free PACKAGING: bulk HISTORICAL PART NUMBER: VPR221SZ T 420R22 TCR0.2 T B (will continue to be used) VPR221SZ T 420R22 TCR0.2 T B MODEL TERMINATION OHMIC VALUE TCR CHARACTERISTIC ABSOLUTE TOLERANCE PACKAGING T = lead (Pb)-free none = tin/lead 420.22  TCR0.2 T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % B = bulk T = tape and reel Note (1) For non-standard requests, please contact application engineering www.foilresistors.com 4 For any questions, contact: foil@vishaypg.com Document Number: 63127 Revision: 16-Aug-12 Legal Disclaimer Notice Vishay Precision Group, Inc. Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. You should ensure you have the current version of the relevant information by contacting VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of VPG. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale. Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Copyright Vishay Precision Group, Inc., 2014. All rights reserved. Document No.: 63999 Revision: 15-Jul-2014 www.vpgsensors.com 1