Accutrim™ 1202 Styles
Vishay Foil Resistors
Bulk Metal® Foil Ultra High Technology Precision Trimming Potentiometers,
1 1/4" Rectilinear, RJ12 Style, Designed to Meet or Exceed The Requirements
of MIL-PRF-22097, Char. F with Smooth and Unidirectional Output
FEATURES
Resistance
Resistance
Vishay Foil precision trimmers have the Bulk Metal® Foil
resistive element which possesses a unique inherent
temperature and load life stability. Plus, their advanced
virtually back lash-free adjustment mechanism makes them
easy to set quickly and accurately and keeps the setting
exactly on target.
BULK METAL®
FOIL
WIREWOUND
Wiper Travel
Wiper Travel
TERMINATION
STYLE
1202
P-In line PC pins
Y-staggered PC pins (1)
L-flexible wire leads
LB-flexible wire leads
with bushings
(panel mounted)
AVERAGE
WEIGHT
(g)
2.5
2.5
3.3
POWER
RATING
at + 85 °C
AMBIENT
NO. OF
TURNS
0.5 W
25 ± 2
5.1
Note
• See Figures 1 and 2
TABLE 2 - VALUES VS. TOLERANCES
STANDARD RESISTANCE
VALUES (in )
2, 5, 10(2)
20, 50, 100, 200, 250, 500,
1K, 2K, 5K, 10K, 20K
STANDARD TOLERANCES
± 10 %, ± 20 %
5 %, 10 %
CERMET
Wiper Travel
TABLE 3 - 1202 (RJ12) SERIES
ELECTRICAL SPECIFICATIONS
TABLE 1 - MODEL SELECTION
MODEL
Resistance
INTRODUCTION
Temperature coefficient of resistance (TCR):
± 10 ppm/°C maximum (3)
(- 55 °C to + 150 °C ref. at + 25 °C);
through the wiper (4); ± 25 ppm/°C
A smooth and unidirectional resistance with
leadscrew adjustment
Load life stability: 0.1 % typical R, 0.5 % maximum R
under full rated power at + 85 °C** for 2000 h
Settability: 0.05 % typical; 0.1 % maximum
Setting stability: 0.1 % typical; 0.5 % maximum, SS
Power rating: 0.5 W at + 85 °C
Resistance range: 2 to 20 k
“O“-ring prevents ingress of fluids during any board
cleaning operation
Electrostatic discharge (ESD) up to 25 000 V
Terminal finish: gold plated (tin/lead finish is available on
request; see notes at figures 1 and 2)
Temperature Coefficient of Resistance (TCR), 50 and up:
End-to-end (3): ± 10 ppm/°C (- 55 °C to + 150 °C, ref. + 25 °C)
2 , 5 , 10 , 20 ± 20 ppm/°C (- 55 °C to + 150 °C,
ref. + 25 °C)
Through the wiper (4): ± 25 ppm/°C (- 55 °C to + 150 °C,
ref. + 25 °C)
Stability:
Load life at 2000 h, under full rated power of 0.5 W at + 85 °C;
0.1 % typical R; 0.5 % maximum R
Load life at 10 000 h, under full rated power of 0.5 W at + 85 °C;
0.1 % typical R; 1.0 % maximum R
Power Rating (5): 0.5 W at + 85 °C
Settability: 0.05 % typical; 0.1 % maximum
Setting Stability: 0.1 % typical; 0.5 % maximum
Contact Resistance variation - CRV (noise):
3 typical; 10 maximum
Hop-off: 0.25 % typical; 1.0 % maximum
High-Frequency Operation to 100 MHz:
Rise time: 10 ns at 1 k
Inductance: 0.08 µH typical
Capacitance: 0.5 pF typical
Operating Temperature Range: - 55 °C to + 150 °C
Note
• Refer to page 4 for footnotes
* Pb containing terminations are not RoHS compliant, exemptions may apply
** See a definition of typical in the VPG glossary at the link http://www.vishaypg.com/foil-resistors/faq/glossary/
Document Number: 63055
Revision: 11-Jun-13
For any questions, contact: foil@vishaypg.com
www.vishayfoilresistors.com
1
Accutrim™ 1202 Styles
Vishay Foil Resistors
TABLE 4 - MECHANICAL SPECIFICATIONS
Adjustment Turns
25 ± 2
Case Material
Glass fortified diallyl-phthalate (DAP); black
Mechanical Stops
Wiper idles - no discontinuity
Shaft Torque
8 oz. in. maximum; 3 oz. in. typical
Internal Terminations
All welded - no flux
Backlash
0.05 % typical
FIGURE 1 - SCHEMATIC AND DIMENSIONS FOR PIN STYLES in Inches (Millimeters)
1202P
(In-Line Pins) (1)
0.125" (3.18 mm) A
0.093" (2.36 mm) DIA (A)
2 Mtg. Holes
0.070" (1.78 mm) C
1.000" (25.40 mm) C
0.195"
(4.95 mm) A
Slot 0.025" (0.64 mm) W x
0.031" (0.79 mm) DP (A)
0.125"
(3.18 mm) A
0.325"
(8.26 mm) A
0.235"
(5.97 mm) C
0.500"
(12.70 mm) C
0.700"
(17.78 mm) C
0.028" (0.71 mm) DIA (B)
3 Pin Type Leads
0.260"
(6.60 mm) C
0.900" (22.86 mm) C
2
1
2
0.125"
(3.18 mm) DIA (A)
3
CW
1
3
Schematic
1.250" (31.75 mm) C
1202Y
(Staggered Pins) (1)
0.125" (3.18 mm) A
0.093" (2.36 mm) DIA (A)
2 Mtg. Holes
0.070" (1.78 mm) C
1.000" (25.40 mm) C
0.195"
(4.95 mm) A
Slot 0.025" (0.64 mm) W x
0.031" (0.79 mm) DP (A)
0.125"
(3.18 mm) A
0.235"
(5.97 mm) C
0.325"
(8.26 mm) A
0.500"
(12.70 mm) C
0.028" (0.71 mm) DIA (B)
3 Pin Type Leads
0.300" 0.265"
(7.62 mm) C (6.73 mm) C
0.100"
(2.54 mm) C
0.700" (17.78 mm) C
1
2
3
0.125"
(3.18 mm) DIA (A)
1
3
2
Schematic
1.250" (31.75 mm) C
TOLERANCES:
CW
STANDARD MARKING ILLUSTRATION:
A = ± 0.005" (0.13 mm)
Model No., Resistance Value,
Tolerance, TCR
B = ± 0.003" (0.08 mm)
C = ± 0.010" (0.25 mm)
VFR Date Code
1
Note
(1)
Pin leads are gold plated nickel which are solderable or weldable.
3
2
CW
Schematic
www.vishayfoilresistors.com
2
For any questions, contact: foil@vishaypg.com
Document Number: 63055
Revision: 11-Jun-13
Accutrim™ 1202 Styles
Vishay Foil Resistors
FIGURE 2 - SCHEMATIC AND DIMENSIONS FOR FLEXIBLE WIRE STYLES in Inches (Millimeters)
1202L
0.093" (2.36 mm) DIA (A)
2 Mtg. Holes
3 Color Coded Leads—
# 30 AWG Teflon Coated
Insulated Stranded Wire
1.000" (25.40 mm) C
11.50" (292.10 mm)
Min. Length
(Flexible Leads)(2)
0.125" (3.18 mm) A
0.070" (1.78 mm) C
0.195"
(4.95 mm) A
Slot 0.025" (0.64 mm) W x
0.031" (0.79 mm) DP (A)
G
0.125"
(3.18 mm) A
Y
0.325"
(8.26 mm) A
0.235"
(5.97 mm) C
R
G
0.125"
(3.18 mm) DIA (A)
Y
R
CW
Y
R
G
Schematic
1.250" (31.75 mm) C
1202LB
0.093" (2.36 mm) DIA (A)
2 Mtg. Holes
3 Color Coded Leads—
# 30 AWG Teflon Coated
Insulated Stranded Wire
1.000" (25.40 mm) C
11.50" (292.10 mm)
Min. Length
(Panel Mounted)(2)
G
0.125" (3.18 mm) A
0.042" (1.07 mm) B
0.300"
(7.62 mm) A
0.280" (7.11 mm) B
Slot:
0.025" (0.64 mm) W x
0.031" (0.79 mm) DP (A)
# 10 - 32 N.C. - 2
0.325"
(8.26 mm) A
0.400"
0.235"
(10.16 mm) A
(5.97 mm) A
Y
0.125" (3.18 mm) C
R
1.250" (31.75 mm) C
G
0.195"
(4.95 mm) A
Rubber Gasket
Lockwasher
Hexnut
R
Y
CW
Y
G
Schematic
R
TOLERANCES:
A = ± 0.005" (0.13 mm)
B = ± 0.003" (0.08 mm)
C = ± 0.010" (0.25 mm)
Standard marking shown on previous page.
Note
(2) Wire terminations: silver plated copper.
Percent of Rated Power
FIGURE 3 - POWER DERATING CURVE
+ 85 °C
+ 100
+ 75
+ 50
+ 25
0
- 75
- 50
- 25
0
+ 25
+ 50
+ 75 + 100 + 125 + 150 + 175
Ambient Temperature °C
Document Number: 63055
Revision: 11-Jun-13
For any questions, contact: foil@vishaypg.com
www.vishayfoilresistors.com
3
Accutrim™ 1202 Styles
Vishay Foil Resistors
TABLE 5 - COMPARISON
MIL-PRF-22097/2 CHARACTERISTIC F
1202 MAXIMUM (Worst Case) (6)
No failures
± 10 %
17 to 27 turns
± 2 % or 20 (7)
± 3.0 % or 3 (7)
No failures
± 10 %
25 ± 2 turns
2
3 typical, 10 maximum
900 VAC, 1 min
350 VAC, 1 min
1000 M
8 oz. in. maximum
± 1.0 %
900 VAC, 1 min
350 VAC, 1 min
1000 M
8 oz. in. maximum
± 1.0 %
± 0.01 % (± 100 ppm/°C)
± 1.0 %
3.0 % or 3 (7)
± 0.001 % (± 10 ppm/°C)
± 0.5 %
3 typical, 10 maximum
TEST GROUP III
Shock (specified pulse)
Vibration (high-frequency)
Contact resistance variation - CRV (noise)
Salt spray
± 1.0 %
± 1.0 %
± 3.0 % or 3 (7)
No corrosion
± 0.5 %
± 0.5 %
3 typical, 10 maximum
No corrosion
TEST GROUP IV
Solder heat
Life (1000 h at + 85 °C) (8)
Contact resistance variation - CRV (noise)
± 1.0 %
± 2.0 %
± 3.0 % or 3 (7)
± 0.05 %
± 0.5 %
3 typical, 10 maximum
TEST GROUP V
Low-temperature operation
High-temperature exposure
Contact resistance variation - CRV (noise)
± 1.0 %
± 2.0 %
± 3.0 % or 3 (7)
± 0.5 %
± 0.5 %
3 typical, 10 maximum
TEST GROUP VI
Rotational life
Contact resistance variation - CRV (noise)
Terminal strength
± 2.0 %
± 3.0 % or 3 (7)
2 lbs
± 2.0 %
3 typical, 10 maximum
2 lbs
MIL-STD-202 method 208
No continuous stream of bubbles
MIL-STD-202 method 208
No continuous stream of bubbles
MIL-STD-810 method 508
No mechanical damage
MIL-STD-810 method 508
No mechanical damage
TEST GROUP I
Visual and mechanical
Total resistance
Actual effective electrical travel
End resistance
Contact resistance variation - CRV (noise)
Dielectric withstanding voltage - DWV
Per MIL-STD-202, methods 301 and 105
Atmospheric pressure
Barometric pressure
Insulation resistance
Shaft torque
Thermal shock
TEST GROUP II
Resistance temperature characteristic - TCR
Moisture resistance
Contact resistance variation - CRV (noise)
TEST GROUP VII
Solderability (excluding terminations L and LB)
Immersion (excluding terminations L and LB)
TEST GROUP VIII
Fungus
Notes
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Preferred termination style for current 1-1/4 inch rectilinear
trimmers (staggered PC pins present a sturdier mounting
arrangement for shock, vibration, and impact situations).
10 at ± 5 % available on special order.
Maximum TCR applies to the 3 (sigma) limit or 99.73 % of a
production lot. (Measured end-to-end with wiper off the
element.)
Measurements of TCR through the wiper are influenced more by
setting stability and the percentage of the total resistance in use
(at the wiper) than by fundamental resistance change due to
temperature alone. The parameter shown in Table 3 is a 2
distribution typifying the behavior of the device when used with
40 % or more of the total resistance in use.
Derated linearly from full power at + 85 °C to zero power at
+ 150 °C. See Figure 3 in this datasheet.
All R’s are measured to the tolerance specified + 0.01 .
Whichever is greater.
Load-Life test performed at nominal rated power, 0.5 W, at
+ 85 °C.
www.vishayfoilresistors.com
4
Special Available Options:
Special marking
Special lengths for lead wires (L, LB Style)
Hooked leads
Alternate bushing and PC combinations
Power conditioning and screening operations
VFR TRIMMERS ARE INSPECTED
100 % for:
• Immersion
• Resistance tolerance check
• End resistance
• Visual-mechanical
• Dynamic tests for continuity, CRV
By sample for:
• TCR
• DWV
For any questions, contact: foil@vishaypg.com
Document Number: 63055
Revision: 11-Jun-13
Accutrim™ 1202 Styles
Vishay Foil Resistors
Circuit A is a conventional circuit employing a high value wire
wound trimmer (4) linearized by two padding resistors (1 and
2) for the purpose of trimming resistor (3) to within less than
100 ppm absolute resistance.
1
Circuit B uses only a low value infinite resolution Vishay
trimming potentiometer (5) to accomplish the same results.
Saving in cost and board space is achieved. A low value wire
wound trimmer cannot be used because of poor resolution.
4
3
3
5
2
Circuit A
Circuit B
TABLE 6 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y5050500R000K0L (preferred part number format)
DENOTES PRECISION
VALUE
Y
R =
K = k
Y
5
0
5
0
5
PRODUCT CODE
5050 = 1202L(2)
0050 = 1202LB(2)
0051 = 1202P(1)
6050 = 1202PB(1)
5051 = 1202Y(1)
7050 = 1202YB(1)
0
0
CHARACTERISTICS (3)
0 = gold plated pins (lead (Pb)-free)
0 = silver plated copper wire terminations
(lead (Pb)-free); styles L & LB
1 to 999 = custom
R
0
0
0
K
0
TOLERANCE
PACKAGING
J = ± 5 %
K = ± 10 %
M = ± 20 %
L = foam/box pack
L
FOR EXAMPLE: ABOVE GLOBAL ORDER Y5050 500R000 K 0 L:
TYPE: 1202L
VALUE: 500.0
ABSOLUTE TOLERANCE: ± 10.0 %
TERMINATION: gold plated (lead (Pb)-free)
PACKAGING: foam/box pack
HISTORICAL PART NUMBER: 1202L 500R00 K B (will continue to be used)
1202L
500R00
K
MODEL
RESISTANCE VALUE
TOLERANCE
PACKAGING
500.0
J = ± 5 %
K= ± 10 %
M= ± 20 %
B = bulk pack
1202L(2)
1202LB(2)
1202P(1)
1202PB(1)
1202Y(1)
1202YB(1)
B
Notes
(1)
(2)
(3)
Pin leads are gold plated nickel which are solderable or weldable (lead (Pb)-free).
Wire terminations: silver plated cooper (lead (Pb)-free).
For non-standard requests, please contact application engineering.
Document Number: 63055
Revision: 11-Jun-13
For any questions, contact: foil@vishaypg.com
www.vishayfoilresistors.com
5
Legal Disclaimer Notice
Vishay Precision Group, Inc.
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.
The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.
VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.
Copyright Vishay Precision Group, Inc., 2014. All rights reserved.
Document No.: 63999
Revision: 15-Jul-2014
www.vpgsensors.com
1