ZMY6V2-GS08

ZMY3V9 to ZMY75 www.vishay.com Vishay Semiconductors Zener Diodes FEATURES • Silicon planar power Zener diodes • For use in stablilizing and clipping circuits with high power rating • The Zener voltages are graded according to the international E 24 standard. Smaller voltage tolerances are available upon request • These diodes are also available in the DO-41 case with the type designation ZPY3V9 to ZPY75 LINKS TO ADDITIONAL RESOURCES 3D 3D • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 3D Models PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 3.9 to 75 V Test current IZT 10 to 100 mA VZ specification Pulse current Circuit configuration Single ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY ZMY3V9 to ZMY75 ZMY3V9 to ZMY75-series-GS18 5 000 (12 mm tape on 13" reel) 10 000/box ZMY3V9 to ZMY75 ZMY3V9 to ZMY75-series-GS08 1 500 (12 mm tape on 7" reel) 12 000/box PACKAGE PACKAGE NAME MELF (DO-213AB) glass WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS 135 mg UL 94 V-0 MSL level 1 (according J-STD-020) Peak temperature max. 260 °C ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation Zener current Junction to ambient air Junction to ambient case Junction temperature, maximum Storage temperature range TEST CONDITION SYMBOL VALUE UNIT Valid provided that electrodes are kept at ambient temperature Ptot 1000 mW RthJA 170 K/W RthJC 60 K/W Tj 175 °C Tstg -55 to +175 °C See table “Characteristics” Valid provided that electrodes are kept at ambient temperature Rev. 2.0, 25-Nov-2021 Document Number: 85788 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ZMY3V9 to ZMY75 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZMY4V3 DYNAMIC RESISTANCE f = 1 kHz ADMISSIBLE ZENER CURRENT (1) TEMPERATURE COEFFICIENT OF ZENER VOLTAGE VR at IR ZZ at IZT1 IZ αVZ at IZT1 Ω mA 10-4/°C TEST CURRENT VZ at IZT1 IZT1 V mA V μA MIN. NOM. MAX. 3.9 3.7 4.1 4.3 4 4.6 MAX. TYP. MIN. MAX. 100 - 0.5 7 4 203 -7 2 100 - 0.5 7 4 182 -7 3 PART NUMBER ZMY3V9 REVERSE VOLTAGE ZENER VOLTAGE RANGE (2) ZMY4V7 4.4 4.7 5 100 - 0.5 7 4 165 -7 4 ZMY5V1 4.8 5.1 5.4 100 0.7 0.5 5 2 150 -6 5 ZMY5V6 5.2 5.6 6 100 1.5 0.5 2 1 135 -3 5 ZMY6V2 5.8 6.2 6.6 100 2 0.5 2 1 128 -1 6 ZMY6V8 6.4 6.8 7.2 100 3 0.5 2 1 110 0 7 ZMY7V5 7 7.5 7.9 100 5 0.5 2 1 100 0 7 ZMY8V2 7.7 8.2 8.7 100 6 0.5 2 1 89 3 8 ZMY9V1 8.5 9.1 9.6 50 7 0.5 4 2 82 3 8 ZMY10 9.4 10 10.6 50 7.5 0.5 4 2 74 5 9 ZMY11 10.4 11 11.6 50 8.5 0.5 7 3 66 5 10 ZMY12 11.4 12 12.7 50 9 0.5 7 3 60 5 10 ZMY13 12.4 13 14.1 50 10 0.5 9 4 55 5 10 ZMY15 13.8 15 15.8 50 11 0.5 9 4 49 5 10 ZMY16 15.3 16 17.1 25 12 0.5 10 5 44 7 11 ZMY18 16.8 18 19.1 25 14 0.5 11 5 40 7 11 ZMY20 18.8 20 21.2 25 15 0.5 12 6 36 7 11 ZMY22 20.8 22 23.3 25 17 0.5 13 7 34 7 11 ZMY24 22.8 24 25.6 25 18 0.5 14 8 29 7 12 ZMY27 25.1 27 28.9 25 20 0.5 15 9 27 7 12 ZMY30 28 30 32 25 22.5 0.5 20 10 25 7 12 ZMY33 31 33 35 25 25 0.5 20 11 22 7 12 ZMY36 34 36 38 10 27 0.5 60 25 20 7 12 ZMY39 37 39 41 10 29 0.5 60 30 18 8 12 ZMY43 40 43 46 10 32 0.5 80 35 17 8 13 ZMY47 44 47 50 10 35 0.5 80 40 15 8 13 ZMY51 48 51 54 10 38 0.5 100 45 14 8 13 ZMY56 52 56 60 10 42 0.5 100 50 13 8 13 ZMY62 58 62 66 10 47 0.5 130 60 11 8 13 ZMY68 64 68 72 10 51 0.5 130 65 10 8 13 ZMY75 70 75 79 10 56 0.5 160 70 9 8 13 Notes (1) Valid provided that electrodes are kept at ambient temperature (2) Tested with pulses t = 5 ms p Rev. 2.0, 25-Nov-2021 Document Number: 85788 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ZMY3V9 to ZMY75 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Ω 103 °C/W 103 ZMY... 5 4 3 2 rzj 5 4 3 2 5 4 3 2 rthA 102 ZMY5.1 102 ZMY4.3 5 4 3 2 ZMY18 ZMY12 0.5 0.2 10 10 5 4 3 2 0.1 5 0.05 4 3 0.02 2 0.01 ZMY6.2 ZMY7.5 ZMY10 1 1 2 3 4 5 7 10 18312 2 3 4 5 7 1 v= 10-1 1 10 s tP mA ZMY... 240 200 IZ Tj = 25 °C ZMY3.9 ZMY4.7 7 2 PI Fig. 4 - Pulse Thermal Resistance vs. Pulse Duration ZMY... 5 4 3 t T P ___ T V=0 18286 IZ Ω 100 tP 10-4 10-3 10-2 10-5 100 mA Fig. 1 - Dynamic Resistance vs. Zener Current rzj ZMY... ZMY5.6 ZMY6.8 160 ZMY43 120 100 mA ZMY30 ZMY24 7 5 4 3 ZMY10 ZMY12 80 ZMY22 50 mA ZMY18 40 2 1 0 1 2 3 4 5 10 2 3 4 5 100 mA 0 1 2 4 5 6 8 7 10 11 12 13 14 15 V Fig. 5 - Breakdown Characteristics mA ZMY... ZMY... 60 ZMY15 IZ ZMY18 Tj = 25 °C ZMY22 50 0.8 0.6 9 VZ Fig. 2 - Dynamic Resistance vs. Zener Current W 1.0 3 18309 IZ 18313 Ptot ZMY8.2 Test Current lZ ZMY36 10 ZMY27 40 Test Current lZ 25 mA 30 ZMY33 ZMY39 0.4 ZMY47 20 10 mA 0.2 10 0 0 0 19969 200 °C 100 Tamb Fig. 3 - Admissible Power Dissipation vs. Ambient Temperature 0 18310 5 10 15 20 25 30 35 40 45 50 V VZ Fig. 6 - Breakdown Characteristics Rev. 2.0, 25-Nov-2021 Document Number: 85788 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ZMY3V9 to ZMY75 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MELF DO-213AB (glass) 2.6 (0.102) 2.4 (0.094) Cathode identification 0.55 (0.022) 5.2 (0.205) 4.8 (0.189) The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 4.00 (0.157) max. 3.00 (0.118) min. min. 1.25 (0.049) 6.50 (0.256) 18317 ref. Rev. 2.0, 25-Nov-2021 Document Number: 85788 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000