ZPY27-TR

ZPY3V9 to ZPY75 www.vishay.com Vishay Semiconductors Zener Diodes FEATURES • Silicon planar power Zener diodes • For use in stabilizing and clipping circuits with high power rating • The Zener voltages are graded according to the international E 12 standard. • These diodes are also available in the MELF case75 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models PRIMARY CHARACTERISTICS PARAMETER VALUE VZ range nom. 3.9 to 100 V Test current IZT 5 to 100 mA VZ specification Pulse current Circuit configuration UNIT Single ORDERING INFORMATION ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY ZPY3V9 to ZPY75-series-TR 5000 (52 mm tape on 13" reel) 25 000/box ZPY3V9 to ZPY75-series-TAP 5000 per ammopack (52 mm tape) 25 000/box DEVICE NAME ZPY3V9 to ZPY75 ZPY3V9 to ZPY75 PACKAGE PACKAGE NAME WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS DO-41 (DO-204AL) 310 mg UL 94 V-0 MSL level 1 (according J-STD-020) Peak temperature max. 260 °C ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation Zener current Junction to ambient air Junction temperature Storage temperature range TEST CONDITION SYMBOL VALUE UNIT Valid provided that leads at a distance of 4 mm from case are kept at ambient temperature Ptot 1300 mW RthJA 110 K/W See table “Characteristics” Valid provided that leads at a distance of 4 mm from case are kept at ambient temperature Tj 175 °C Tstg -55 to +175 °C Rev. 2.2, 25-Nov-2021 Document Number: 85790 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ZPY3V9 to ZPY75 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) REVERSE VOLTAGE DYNAMIC RESISTANCE f = 1 kHz VR at IR ZENER VOLTAGE RANGE (2) TEST CURRENT VZ at IZT1 IZT1 V mA V μA PART NUMBER MIN. NOM. MAX. ADMISSIBLE ZENER CURRENT (1) TEMPERATURE COEFFICIENT OF ZENER VOLTAGE ZZ at IZT1 IZ TCVZ at IZT1 Ω mA 10-4/°C TYP. MIN. MAX. ZPY3V9 3.7 3.9 4.1 100 - 0.5 4 (< 7) 290 -7 2 ZPY4V3 4 4.3 4.6 100 - 0.5 4 (< 7) 260 -7 3 ZPY4V7 4.4 4.7 5 100 - 0.5 4 (< 7) 235 -7 4 ZPY5V1 4.8 5.1 5.4 100 > 0.7 0.5 2 (< 5) 215 -6 5 ZPY5V6 5.2 5.6 6 100 > 1.5 0.5 1 (< 2) 193 -3 5 ZPY6V2 5.8 6.2 6.6 100 > 2.0 0.5 1 (< 2) 183 -1 6 ZPY6V8 6.4 6.8 7.2 100 > 3.0 0.5 1 (< 2) 157 0 7 ZPY7V5 7 7.5 7.9 100 > 5.0 0.5 1 (< 2) 143 0 7 ZPY8V2 7.7 8.2 8.7 100 > 6.0 0.5 1 (< 2) 127 3 8 ZPY9V1 8.5 9.1 9.6 50 > 7.0 0.5 2 (< 4) 117 3 8 ZPY10 9.4 10 10.6 50 > 7.5 0.5 2 (< 4) 105 5 9 ZPY11 10.4 11 11.6 50 > 8.5 0.5 3 (< 7) 94 5 10 ZPY12 11.4 12 12.7 50 > 9.0 0.5 3 (< 7) 85 5 10 ZPY13 12.4 13 14.1 50 > 10 0.5 4 (< 9) 78 5 10 ZPY15 13.8 15 15.8 50 > 11 0.5 4 (< 9) 70 5 10 ZPY16 15.3 16 17.1 25 > 12 0.5 5 (< 10) 63 7 11 ZPY18 16.8 18 19.1 25 > 14 0.5 5 (< 11) 57 7 11 ZPY20 18.8 20 21.2 25 > 15 0.5 6 (< 12) 52 7 11 ZPY22 20.8 22 23.3 25 > 17 0.5 7 (< 13) 48 7 11 ZPY24 22.8 24 25.6 25 > 18 0.5 8 (< 14) 42 7 12 ZPY27 25.1 27 28.9 25 > 20 0.5 9 (< 15) 38 7 12 ZPY30 28 30 32 25 > 22.5 0.5 10 (< 20) 35 7 12 ZPY33 31 33 35 25 > 25 0.5 11 (< 20) 31 7 12 ZPY36 34 36 38 10 > 27 0.5 25 (< 60) 29 7 12 ZPY39 37 39 41 10 > 29 0.5 30 (< 60) 26 8 12 ZPY43 40 43 46 10 > 32 0.5 35 (< 80) 24 8 13 ZPY47 44 47 50 10 > 35 0.5 40 (< 80) 22 8 13 ZPY51 48 51 54 10 > 38 0.5 45 (< 100) 20 8 13 ZPY56 52 56 60 10 > 42 0.5 50 (< 100) 18 8 13 ZPY62 58 62 66 10 > 47 0.5 60 (< 130) 16 8 13 ZPY68 64 68 72 10 > 51 0.5 65 (< 130) 14 8 13 ZPY75 70 75 79 10 > 56 0.5 70 (< 160) 13 8 13 Notes (1) Valid provided that leads are kept at ambient temperature at a distance of 10 mm from case (2) Tested with pulses t = 5 ms p Rev. 2.2, 25-Nov-2021 Document Number: 85790 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ZPY3V9 to ZPY75 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) W 2 Ω 100 ZPY... ZPY... 7 5 4 Ptot rzj 3 2 ZPY43 ZPY36 10 1 ZPY30 ZPY24 7 5 4 3 ZPY22 ZPY18 2 1 0 0 200 °C 100 Tamb 1 °C/W 103 ZPY... l l RthA 2 0.5 100 0.2 10 0.1 0.05 5 4 3 2 tP v= 0.02 1 10-5 t T P ___ PI T 0.01 0 10-4 10-3 10-2 10-1 1 tP 10 s lead length l mA ZPY... 240 5 4 3 2 IZ ZPY4.3 ZPY18 ZPY12 Tj = 25 °C ZPY3.9 ZPY4.7 200 5 4 3 2 ZPY5.6 ZPY6.8 160 ZPY8.2 Test Current lZ 120 100 mA 10 gzpy1_09 Fig. 5 - Thermal Resistance vs. Lead Length ZPY... ZPY5.1 20 mm 15 10 gzpy1_05 Ω 103 2 5 0 Fig. 2 - Pulse Thermal Resistance vs. Pulse Duration 10 gzpy1_08 °C/W 200 ZPY... 5 4 3 2 rzj 100 mA 3 4 5 2 Fig. 4 - Dynamic Resistance vs. Zener Current 5 4 3 2 10 10 3 4 5 IZ Fig. 1 - Admissible Power Dissipation vs. Ambient Temperature rthA 2 gzpy1_04 ZPY10 ZPY12 80 5 4 3 2 50 mA 40 ZPY6.2 ZPY1 ZPY10 1 1 2 3 4 5 7 10 ZPY7.5 2 IZ 3 4 5 7 100 mA gzpy1_06 Fig. 3 - Dynamic Resistance vs. Zener Current 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 V VZ gzpy1_01 Fig. 6 - Breakdown Characteristics Rev. 2.2, 25-Nov-2021 Document Number: 85790 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ZPY3V9 to ZPY75 www.vishay.com Vishay Semiconductors mA ZPY... 60 ZPY18 ZPY15 ZPY22 50 IZ Tj = 25 °C ZPY27 40 Test Current lZ 25 mA 30 ZPY33 ZPY39 ZPY47 20 10 mA 10 0 0 5 10 15 20 25 30 35 40 VZ 45 50 V gzpy1_02 Fig. 7 - Breakdown Characteristics PACKAGE DIMENSIONS in millimeters (inches): DO-41 (DO-204AL) 26 (1.024) min. 4.1 (0.161) max. 26 (1.024) min. 2.6 (0.102) max. 0.86 (0.034) max. Cathode identification 94 9368 Rev. 2.2, 25-Nov-2021 Document Number: 85790 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000