ZPY3V9 to ZPY75
www.vishay.com
Vishay Semiconductors
Zener Diodes
FEATURES
• Silicon planar power Zener diodes
• For use in stabilizing and clipping circuits with
high power rating
• The Zener voltages are graded according to the
international E 12 standard.
• These diodes are also available in the MELF
case75
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
PRIMARY CHARACTERISTICS
PARAMETER
VALUE
VZ range nom.
3.9 to 100
V
Test current IZT
5 to 100
mA
VZ specification
Pulse current
Circuit configuration
UNIT
Single
ORDERING INFORMATION
ORDERING CODE
TAPED UNITS PER REEL
MINIMUM ORDER
QUANTITY
ZPY3V9 to ZPY75-series-TR
5000 (52 mm tape on 13" reel)
25 000/box
ZPY3V9 to ZPY75-series-TAP
5000 per ammopack
(52 mm tape)
25 000/box
DEVICE NAME
ZPY3V9 to ZPY75
ZPY3V9 to ZPY75
PACKAGE
PACKAGE NAME
WEIGHT
MOLDING COMPOUND
FLAMMABILITY RATING
MOISTURE SENSITIVITY
LEVEL
SOLDERING CONDITIONS
DO-41 (DO-204AL)
310 mg
UL 94 V-0
MSL level 1
(according J-STD-020)
Peak temperature max. 260 °C
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Power dissipation
Zener current
Junction to ambient air
Junction temperature
Storage temperature range
TEST CONDITION
SYMBOL
VALUE
UNIT
Valid provided that leads at a distance of 4 mm
from case are kept at ambient temperature
Ptot
1300
mW
RthJA
110
K/W
See table “Characteristics”
Valid provided that leads at a distance of 4 mm
from case are kept at ambient temperature
Tj
175
°C
Tstg
-55 to +175
°C
Rev. 2.2, 25-Nov-2021
Document Number: 85790
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ZPY3V9 to ZPY75
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
REVERSE
VOLTAGE
DYNAMIC
RESISTANCE
f = 1 kHz
VR at IR
ZENER VOLTAGE
RANGE (2)
TEST
CURRENT
VZ at IZT1
IZT1
V
mA
V
μA
PART NUMBER
MIN. NOM. MAX.
ADMISSIBLE
ZENER
CURRENT (1)
TEMPERATURE
COEFFICIENT OF ZENER
VOLTAGE
ZZ at IZT1
IZ
TCVZ at IZT1
Ω
mA
10-4/°C
TYP.
MIN.
MAX.
ZPY3V9
3.7
3.9
4.1
100
-
0.5
4 (< 7)
290
-7
2
ZPY4V3
4
4.3
4.6
100
-
0.5
4 (< 7)
260
-7
3
ZPY4V7
4.4
4.7
5
100
-
0.5
4 (< 7)
235
-7
4
ZPY5V1
4.8
5.1
5.4
100
> 0.7
0.5
2 (< 5)
215
-6
5
ZPY5V6
5.2
5.6
6
100
> 1.5
0.5
1 (< 2)
193
-3
5
ZPY6V2
5.8
6.2
6.6
100
> 2.0
0.5
1 (< 2)
183
-1
6
ZPY6V8
6.4
6.8
7.2
100
> 3.0
0.5
1 (< 2)
157
0
7
ZPY7V5
7
7.5
7.9
100
> 5.0
0.5
1 (< 2)
143
0
7
ZPY8V2
7.7
8.2
8.7
100
> 6.0
0.5
1 (< 2)
127
3
8
ZPY9V1
8.5
9.1
9.6
50
> 7.0
0.5
2 (< 4)
117
3
8
ZPY10
9.4
10
10.6
50
> 7.5
0.5
2 (< 4)
105
5
9
ZPY11
10.4
11
11.6
50
> 8.5
0.5
3 (< 7)
94
5
10
ZPY12
11.4
12
12.7
50
> 9.0
0.5
3 (< 7)
85
5
10
ZPY13
12.4
13
14.1
50
> 10
0.5
4 (< 9)
78
5
10
ZPY15
13.8
15
15.8
50
> 11
0.5
4 (< 9)
70
5
10
ZPY16
15.3
16
17.1
25
> 12
0.5
5 (< 10)
63
7
11
ZPY18
16.8
18
19.1
25
> 14
0.5
5 (< 11)
57
7
11
ZPY20
18.8
20
21.2
25
> 15
0.5
6 (< 12)
52
7
11
ZPY22
20.8
22
23.3
25
> 17
0.5
7 (< 13)
48
7
11
ZPY24
22.8
24
25.6
25
> 18
0.5
8 (< 14)
42
7
12
ZPY27
25.1
27
28.9
25
> 20
0.5
9 (< 15)
38
7
12
ZPY30
28
30
32
25
> 22.5
0.5
10 (< 20)
35
7
12
ZPY33
31
33
35
25
> 25
0.5
11 (< 20)
31
7
12
ZPY36
34
36
38
10
> 27
0.5
25 (< 60)
29
7
12
ZPY39
37
39
41
10
> 29
0.5
30 (< 60)
26
8
12
ZPY43
40
43
46
10
> 32
0.5
35 (< 80)
24
8
13
ZPY47
44
47
50
10
> 35
0.5
40 (< 80)
22
8
13
ZPY51
48
51
54
10
> 38
0.5
45 (< 100)
20
8
13
ZPY56
52
56
60
10
> 42
0.5
50 (< 100)
18
8
13
ZPY62
58
62
66
10
> 47
0.5
60 (< 130)
16
8
13
ZPY68
64
68
72
10
> 51
0.5
65 (< 130)
14
8
13
ZPY75
70
75
79
10
> 56
0.5
70 (< 160)
13
8
13
Notes
(1) Valid provided that leads are kept at ambient temperature at a distance of 10 mm from case
(2) Tested with pulses t = 5 ms
p
Rev. 2.2, 25-Nov-2021
Document Number: 85790
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ZPY3V9 to ZPY75
www.vishay.com
Vishay Semiconductors
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
W
2
Ω
100
ZPY...
ZPY...
7
5
4
Ptot
rzj
3
2
ZPY43
ZPY36
10
1
ZPY30
ZPY24
7
5
4
3
ZPY22
ZPY18
2
1
0
0
200 °C
100
Tamb
1
°C/W
103
ZPY...
l
l
RthA
2
0.5
100
0.2
10
0.1
0.05
5
4
3
2
tP
v=
0.02
1
10-5
t
T
P
___
PI
T
0.01
0
10-4 10-3 10-2
10-1
1
tP
10 s
lead length l
mA
ZPY...
240
5
4
3
2
IZ
ZPY4.3
ZPY18
ZPY12
Tj = 25 °C
ZPY3.9 ZPY4.7
200
5
4
3
2
ZPY5.6
ZPY6.8
160
ZPY8.2
Test Current lZ
120 100 mA
10
gzpy1_09
Fig. 5 - Thermal Resistance vs. Lead Length
ZPY...
ZPY5.1
20 mm
15
10
gzpy1_05
Ω
103
2
5
0
Fig. 2 - Pulse Thermal Resistance vs. Pulse Duration
10
gzpy1_08
°C/W
200
ZPY...
5
4
3
2
rzj
100 mA
3 4 5
2
Fig. 4 - Dynamic Resistance vs. Zener Current
5
4
3
2
10
10
3 4 5
IZ
Fig. 1 - Admissible Power Dissipation vs. Ambient Temperature
rthA
2
gzpy1_04
ZPY10
ZPY12
80
5
4
3
2
50 mA
40
ZPY6.2
ZPY1 ZPY10
1
1
2
3 4 5 7
10
ZPY7.5
2
IZ
3 4 5
7
100 mA
gzpy1_06
Fig. 3 - Dynamic Resistance vs. Zener Current
0
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 V
VZ
gzpy1_01
Fig. 6 - Breakdown Characteristics
Rev. 2.2, 25-Nov-2021
Document Number: 85790
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ZPY3V9 to ZPY75
www.vishay.com
Vishay Semiconductors
mA
ZPY...
60
ZPY18
ZPY15
ZPY22
50
IZ
Tj = 25 °C
ZPY27
40
Test Current lZ
25 mA
30
ZPY33
ZPY39
ZPY47
20
10 mA
10
0
0
5
10
15
20
25
30
35
40
VZ
45 50 V
gzpy1_02
Fig. 7 - Breakdown Characteristics
PACKAGE DIMENSIONS in millimeters (inches): DO-41 (DO-204AL)
26 (1.024) min.
4.1 (0.161) max.
26 (1.024) min.
2.6 (0.102) max.
0.86 (0.034) max.
Cathode identification
94 9368
Rev. 2.2, 25-Nov-2021
Document Number: 85790
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000