F-EDFA

Data Sheet: F-EDFA F-EDFA series are CATV optical booster amplifiers for gain spectrum bands within 1540-1565nm. These optical amplifiers are designed for either single channel applications or up to 8 DWDM channels. In most applications, CATV fiber systems operate on a single wavelength with no requirements on gain flatness. The F-EDFA booster amplifier offers low NF with a high saturated output power. The unit features one of the worlds best pump lasers and utilizes OFS erbium doped optical fiber made in America. The unit is designed with heat dissipation and ventilation in mind to ensure a long operational life. A front panel LCD indicates unit status and has a warning alarm, automatically switching off the pump laser when no input is detected. The F-EDFA also features RS-232 and SNMP via RJ45 for remote system monitoring and management. With so many features the F-EDFA series amplifiers offer high reliability and performance for any system integration project. Typical F-EDFA Application Technical Specifications Operating Wavelenth Range: Input Power (dBm) Max Output Power (dBm) Output Adjustable Range Output Ports Difference Between Outputs Noise Figure (Pin=0dBm) Polarization Loss Polarization Gain Polarization Dispersion Input/Output Isolation Pump Power Leakage Echo Loss 1540 – 1563 nm -10 ~ +10 (Typ +3) +10 ~ +26 dBm -6 ~ 0 dBm 1 – 6 SC/APC 1 – 16 LC -0.5 ~ +0.5 dB 6.3 dB 0.3 dB 0.4 dB 0.5 ps 30 dB -30 dBm 55 dB SNMP Network Interface Communication Interface Power Supply (V) Power Consumption (W) Working Temp Storage Temp Operating Humidity Size (W)x(D)x(H)(“) RJ45 RS232 90 – 265 VAC, 48VDC 50 W -5 – 65 (°C) -40 – 80 (°C) 5 – 90 (%) 19x14.5x1.75 – 1RU 12.4x15.4x5.25 (desk) 15.7x9.6x6.5 (outdoor) Data Sheet: F-EDFA www.thorfiber.com