T81L0006B-AK

tm MCU ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! TE CH T81L0006A/B 8-bit A/D Type MCU 3. General Description The T81L0006A/B is 8-bit microcontroller designed and developed with low power and high speed CMOS technology. It contains a 8K bytes OTP ROM, a 128 × 8 RAM, an 8-channels 8-bit A/D converter, 15/19 I/O lines, a watchdog timer, two 16-bit counter/timers, a seven source, two-priority level nested interrupt structure, two channel pulsed-width modulator (PWM), a full duplex UART, and an on-chip oscillator and clock circuits. In addition, the T81L0006A/B has two selectable modes of power reduction-idle mode and power-down mode. The idle mode freezes the CPU while allowing the RAM, timers, serial port, and interrupt system to continue functioning. The power-down mode saves the RAM contents but freezes the oscillator, causing all other chip functions to be inoperative. 1. Features Compatible with MCS-51 Embedded 8K Bytes OTP ROM 128 x 8-bit Internal RAM 15/19 Programmable I/O Lines for 20/24-pin Package Two 16-bit Timer/Counter & One 16-bit Timer Two External Interrupt Input (Only One Input for 20-pin Package) Two Channel PWM (Only One Channel PWM for 20-pin Package) Driving Capability up to 40 mA Embedded 1k bits EEPROM (for T81L0006B only) Programmable Serial UART Interface Low Power Idle & Power-down Modes Watch-dog Timer On-chip Crystal & RC Oscillator (Selected by Bonding Option) Internal Power-on Reset and External Reset Supported 8-Channel 8-bit A/D Converter SOP20/DIP20 & SOP24/DIP24 Package 3.3V Operating Voltage EEPORM Interface Low Voltage Reset 4. Order information Part number T81L0006A-AK T81L0006A-BK T81L0006A-CK T81L0006A-DK T81L0006A-AD T81L0006A-BD T81L0006A-CD T81L0006A-DD T81L0006B-AK T81L0006B-BK T81L0006B-AD T81L0006B-BD Oscillator type RC Crystal RC Crystal RC Crystal RC Crystal RC Crystal RC Crystal EEPROM NONE NONE NONE NONE NONE NONE NONE NONE Embedded Embedded Embedded Embedded Package 24-pin DIP 24-pin DIP 20-pin DIP 20-pin DIP 24-pin SOP 24-pin SOP 20-pin SOP 20-pin SOP 24-pin DIP 24-pin DIP 24-pin SOP 24-pin SOP ! 2. Applications •Meter •Household Appliances Controller •Handwriting Board •Charger •Sport Devices •Other Controller (Automotive, Toy…) TM Technology Inc. reserves the right to change products or specifications without notice. P. 1 Publication Date: JAN. 2006 Revsion : C tm TE CH T81L0006A/B 5. Block Diagram RAM Addr. Register RAM OTP ROM EEPROM EEPROM interface B Register ACC Stack Pointer Program Address Register TMP2 W DT TMP1 Buffer ALU PC Incrementer Interrupt, Serial port, and Timer Block PSW Program Counter DPTR RST Timing & Control Instruction Register Port 3 Latch PW M Port 2 Latch ADC Port 1 Latch OSC Port 3 Drivers Port 2 Drivers P ort 1 Drivers XTAL1 XTAL2 P3.0 -P3.7 P2.0 P2.1 P2.3 P1.0 -P1.7 TM Technology Inc. reserves the right to change products or specifications without notice. P. 2 Publication Date: JAN. 2006 Revsion : C tm TE CH T81L0006A/B 6. Pin Configuration (RXD) P3.0 (TXD) P3.1 (ADI0) P1.0 (ADI1) P1.1 (INT1) P3.3 GND P2.3 (ADI2) P1.2 (ADI3) P1.3 (ADI4) P1.4 (ADI5) P1.5 (ADI6) P1.6 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 (T1) P3.5 (T0) P3.4 OSC-R STOP RST/VPP VCC P2.1 (VREF) P3.7 (PWM2) P2.0 (PWM1) P3.6 (INT0) P3.2 (ADI7) P1.7 (RXD) P3.0 (TXD) P3.1 (ADI0) P1.0 (ADI1) P1.1 (INT1) P3.3 GND P2.3 (ADI2) P1.2 (ADI3) P1.3 (ADI4) P1.4 (ADI5) P1.5 (ADI6) P1.6 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 (T1) P3.5 (T0) P3.4 XIN XOUT RST/VPP VCC P2.1 (VREF) P3.7 (PWM2) P2.0 (PWM1) P3.6 (INT0) P3.2 (ADI7) P1.7 DIP-24/SOP-24 For RC Oscillator T81L0006A-AK/ T81L0006A-AD T81L0006B-AK/ T81L0006B-AD DIP-24/SOP-24 For Crystal Oscillator T81L0006A-BK/ T81L0006A-BD T81L0006B-BK/ T81L0006B-BD (R XD) P3.0 ( TXD) P3.1 (ADI0) P1.0 (ADI1) P1.1 GND (ADI2) P1.2 (ADI3) P1.3 (ADI4) P1.4 (ADI5) P1.5 (ADI6) P1.6 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 (T1) P3.5 (T0) P3.4 OSC -R STOP RST/VPP VCC (VR EF) P3.7 (PW M 1) P3.6 (INT0) P3.2 (ADI7) P1.7 (R XD) P3.0 ( TXD) P3.1 (ADI0) P1.0 (ADI1) P1.1 GND (ADI2) P1.2 (ADI3) P1.3 (ADI4) P1.4 (ADI5) P1.5 (ADI6) P1.6 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 (T1) P3.5 (T0) P3.4 XIN XOUT RST/VPP VCC (VR EF) P3.7 (PW M 1) P3.6 (INT0) P3.2 (ADI7) P1.7 DIP-20/SOP-20 For RC Oscillator T81L0006A-CK/ T81L0006A-CD DIP-20/SOP-20 For Crystal Oscillator T81L0006A-DK/ T81L0006A-DD TM Technology Inc. reserves the right to change products or specifications without notice. P. 3 Publication Date: JAN. 2006 Revsion : C tm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 TE CH T81L0006A/B 7. Pin Description Number Number (24-Pin) (20-Pin) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Name P3.0/(RXD) P3.1/(TXD) P1.0/(ADI0) P1.1/(ADI1) P3.3/(INT1) GND P2.3 P1.2/(ADI2) P1.3/(ADI3) P1.4/(ADI4) P1.5/(ADI5) P1.6/(ADI6) P1.7/(ADI7) P3.2/(INT0) P3.6/(PWM1) P2.0/(PWM2) P3.7/(VREF) P2.1 VCC RST/VPP XOUT/(STOP) XIN/(OSC-R) P3.4/(T0) P3.5/(T1) I O I I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O Type I/O I/O I/O I/O I/O Description General-purpose I/O pin (Default) or Serial input port. General-purpose I/O pin (Default) or Serial output port. General-purpose I/O pin (Default) or ADC input channel 0. General-purpose I/O pin (Default) or ADC input channel 1. General-purpose I/O pin (Default) or External interrupt source 1. Ground General-purpose I/O pin. General-purpose I/O pin (Default) or ADC input channel 2. General-purpose I/O pin (Default) or ADC input channel 3. General-purpose I/O pin (Default) or ADC input channel 4. General-purpose I/O pin (Default) or ADC input channel 5. General-purpose I/O pin (Default) or ADC input channel 6. General-purpose I/O pin (Default) or ADC input channel 7. General-purpose I/O pin (Default) or External interrupt source 0. General-purpose I/O pin (Default) or PWM signal output channel 1. General-purpose I/O pin (Default) or PWM signal output channel 2. General-purpose I/O pin (Default) or External reference voltage input pin for ADC. General-purpose I/O pin. 3.3V power supply. Reset signal input or programming supply voltage input. Crystal oscillator output terminal or stop RC oscillator network. Crystal oscillator input terminal or RC oscillator external resister connect pin. General-purpose I/O pin (Default) or Timer 0 external input pin. General-purpose I/O pin (Default) or Timer 1 external input pin. 8. Temperature Limit Ratings Parameter Operating temperature Range Storage Temperature Range Rating -40 to +85 -55 to +125 Units °C °C TM Technology Inc. reserves the right to change products or specifications without notice. P. 4 Publication Date: JAN. 2006 Revsion : C tm Symbol VCC ICC IPD TE CH T81L0006A/B 9. Electrical Characteristics D.C Characteristics Parameter Conditions Operating Voltage 25°C Operating Current No load, ADC disable Vcc=3.3V Power-Down Current No load, Vcc=3.3V Only ADC Enable, Others IADC No load Disable VADC ADC Input Voltage Range VREF VREF input voltage range Vout >=VVOH(MIN.) VIH Hi-Level input voltage Vout =VVOH(MIN.) VIL Low-Level input voltage Vout