NVG6THTB301

Open Frame Models Trimmer Selection Guide Series NVG6 Series TOCOS POTENTIOMETERS NVZ6 Series ® Specifications for Through-Hole Single-Turn Trimmers Model Examples Features Cermet Through-Hole, Single-Turn Trimmers Adjustable from Both Sides Front / Top Cross-Slot Dust Cap or Back /Bottom Single-Slot Blade Adjustment Straight Standoff Terminals Radial Lead Paper Tape Packaged in Ammo Box Stable Performance in Adverse Ambient Conditions RoHS Compliant: Pb-Free and Cd-Free Carbon Through-Hole, Single-Turn Trimmers Adjustable from Both Sides Front / Top Cross-Slot Dust Cap or Back /Bottom Single-Slot Blade Adjustment Straight Standoff Terminals Radial Lead Paper Tape Packaged in Ammo Box Stable Performance in Adverse Ambient Conditions RoHS Compliant: Pb-Free and Cd-Free 6.8mm x 8.4mm Open Frame, Through-Hole Carbon Nominal Size and Construction Resistive Element Adjustment Travel Adjustment Type Terminal Style Resistance Range Resistance Tolerance Residual Resistance Noise (C.R.V.) Power Rating Maximum Working Voltage Temperature Range Temperature Coefficient Operating Torque Stop Strength 6.8mm x 8.4mm Open Frame, Through-Hole Cermet Single-Turn: 240 10 Single-Turn: 240 10 Front / Top Cross-Slot Dust Cap or Back /Bottom Single-Slot Blade Adjustment Triangular Footprint, Standoff Straight Pins Radial Lead Paper Taping for Automatic Insertion 100 Ω to 1M Ω (1, 2, 3, 5 Sequence) 30% Within 2% of Total Resistance Value 1k Ω: 10 Ω max.; 100k Ω: < 5% max. Within 4% of Total Resistance Value 0.3 W at 70 C 0 W at 100 C 100V or √ PR = V, whichever is smaller 25 C to 100 C Front / Top Cross-Slot Dust Cap or Back /Bottom Single-Slot Blade Adjustment Triangular Footprint, Standoff Straight Pins Radial Lead Paper Taping for Automatic Insertion 100 Ω to 1M Ω (1, 2, 3, 5 Sequence) 30% Within 2% of Total Resistance Value 1k Ω: 10 Ω max.; 100k Ω: < 5% max. Within 4% of Total Resistance Value 0.1 W at 70 C 0 W at 100 C 100V or √ PR = V, whichever is smaller 25 C to — 0.98 – 29.4 mN • m (10 – 300 gf • cm) 49.0 mN • m (500 gf • cm) 100 C 250ppm / C 0.98 – 29.4 mN • m (10 – 300 gf • cm) 49.0 mN • m (500 gf • cm) Standard Nominal Resistance Values with Ordering Codes Standard Nominal Resistances and Ordering Codes Resistance (Ω ) 100 200 300 500 — Code 101 201 301 501 — Resistance (Ω ) 1,000 2,000 3,000 5,000 — Code 102 202 302 502 — Resistance (Ω ) 10,000 20,000 30,000 50,000 — Code 103 203 303 503 — Resistance (Ω ) 100,000 200,000 300,000 500,000 1,000,000 Code 104 204 304 504 105 6 1177 East Tower Road, Schaumburg, IL 60173 TOCOS AMERICA, INC. Tel: 847-884-6664 Fax: 847-884-6665 E-mail: sales@tocos.com www.tocos.com Open Frame Models Trimmer Selection Guide TOCOS POTENTIOMETERS Unit: mm 3.4 ® Dimensions for Through-Hole Single-Turn Trimmers NVG6THT and NVZ6THT Through-Hole, Vertical Mount, Cross-Slot, Side Adjust (Front or Back) 6.4 ADJ. SLOT 0.6 1.7 3.5 1.2 ADJ. SLOT 0.8 6.8 Recommended PCB Layout HT Side Adjust Pin-Out 8.4 3.4 Mounting Surface 0.3 2.5 3.2 3.2 5 0.5 2.5 5 2.5 0.8 Ø 1.0 (2x) Tape Dimensions Radial Lead Paper Taping 2 Max. 2 Max. 2 Max. 2 Max. NVG6TLTA and NVZ6TLTA Top Adjust Models Available with this Recommended PCB Layout #1 0.5 Max. #2 #3 29.4 LTA Top Adjust Pin-Out 6 Min. 18 21 Ø 1.8 For Bottom Adjust Ø 1.2 Packaging 18mm Paper Tape Ammo Box (L x W x H) 335 x 330 x 50mm 1,000 Pieces Per Box 18 9 Ø4 5 Ø 1.0 (2x) 5 6.35 12.7 Part Numbering System for Through-Hole NVG6 and NVZ6 NVZ 6 T HT B 302 Resistance Code: Expressed in ohms. A three digit code where the first two digits are significant figures, and the third digit indicates the number of zeros that follow these figures (i.e., 300 = 30 Ω ; 301 = 300 Ω ; 302 = 3,000 Ω ; 303 = 30,000 Ω ). Resistance Taper: B = Linear. Mounting Style: HT = Vertical (Side Adjust); LTA = Horizontal ( Top Adjust). Design Type: T = Dust Resistant Cap. Size: 6 = 6mm (See Dimensions). TOCOS Series: NVG = Cermet; NVZ = Carbon. TOCOS AMERICA, INC. 1177 East Tower Road, Schaumburg, IL 60173 Tel: 847-884-6664 Fax: 847-884-6665 E-mail: sales@tocos.com www.tocos.com 3 2.5 3 3.4 Ø 3.7 1.9 1.5 (3.1) 5 Ø 1.2 7