PWR06DPC1W1000N

TOKEN PWR Pulse Withstanding Chip Resistors Pulse Withstanding Chip Resistors Token (PWR) Pulse Withstanding Chip Resistors Provide 50 Percent Increase in Power Dissipation Preview As electronic design engineers have increased the power density of their equipment, the demand for smaller surface mount single-chip circuit protection resistors has also increased. Token developed the PWR Series resistors to provide an economical alternative to bulky molded wirewound components or multi-chip solutions while saving both PC board space and manufacturing costs. To meet the increased demand for the PWR Series resistors, Token has developed a series of pulse withstanding chip resistors with improved power ratings in reduced surface mounted sizes. Designated the PWR Series, the chip resistors deliver up to 50 percent higher power ratings than conventional surface mount resistors - up to 1.5W in a standard 2512 size chip. Token is able to boost this power rating up to 50 percent through a combination of proprietary power film materials and advanced manufacturing processes. The PWR Series Resistors are available in four standard sizes (0805, 1206, 2010 and 2512) with power ratings from 0.125W to 1.5W, and maximum operating voltage ratings for 100V to 500V. Resistance range is from 10 Ω to 20 MΩ, with tolerance tight to 0.5 percent. The PWR meets restriction of hazardous substances RoHS directive and RoHS compliance. Along with the increased power ratings, the PWR Series resistors also feature high surge and high voltage ratings, making them extremely stable in demanding surge and pulse environments. The PWR Series chip resistors are specified for use in power supplies, circuit protection devices, portable battery chargers, motor controls and line-powered equipment. Token will also produce devices outside these specifications to meet specific customer requirements, please contact our sales for more information. Features - High Power Rating . - Tolerance from ±0.5%~5%. - Improved Working Voltage Ratings. - Excellent Pulse Withstanding Performance. - Standard Package sizes of 0805, 1206, 2010, and 2512. Applications - Power Supplies, Diagnostic Equipment. - Industrial Controls, LCD Video Monitors. - Portable Battery Chargers, Medical Devices. - Motor Controls and Line-Powered Equipment. - Metering (Testing/Measurement), Circuit Protection Devices . Version 2010 http://www.token.com.tw/ rfq token.com.tw 01 of 07 TOKEN PWR Pulse Withstanding Chip Resistors Dimensions (Unit: mm) Marking Protective Layer W L Sn Plating Ni Plating Thick Film Ni/Cr Conductor Alumina Substrate Overcoat Resistive Element D1 D1 T D2 D2 Codes PWR05 (0805) PWR06 (1206) PWR10 (2010) PWR12 (2512) L 2.00±0.15 3.05±0.15 5.00±0.20 6.30±0.15 W 1.25±0.15 1.55±0.15 2.45±0.15 3.10±0.15 T 0.55±0.10 0.55±0.10 0.60±0.15 0.55±0.10 D1 0.30±0.20 0.50±0.30 0.60±0.30 0.60±0.30 D2 0.40±0.25 0.40±0.25 0.50±0.25 0.50±0.25 Standard Electrical Specifications Type PWR05 (0805) PWR06 (1206) PWR10 (2010) PWR12 (2512) Power Ratingat 70°C 0.125W 0.33W 0.75W 1.5W Operating Temp. Range -55 ~ +155°C -55 ~ +155°C -55 ~ +155°C -55 ~ +155°C Max Operating Voltage 150V 200V 400V 500V Resistance Tolerance ±0.5% ±1.0% ±2.0% ±3.0% ±5.0% ±0.5% ±1.0% ±2.0% ±3.0% ±5.0% Resistance Range 300Ω~20MΩ 10Ω~299Ω 20.1Ω~10MΩ 10Ω~20Ω TCR ±100PPM / °C ±200PPM / °C ±100PPM / °C ±200PPM / °C Recommend Land Pattern (Unit: mm) C B Codes PWR05 (0805) PWR06 (1206) PWR10 (2010) PWR12 (2512) 02 of 07 A B 1.00 1.15 1.40 1.60 rfq token.com.tw A 1.00 2.00 3.60 4.90 http://www.token.com.tw/ C 1.35±0.2 1.70±0.2 2.50±0.2 3.10±0.2 Version 2010 TOKEN PWR Pulse Withstanding Chip Resistors Packaging Quantity & Reel Specifications (Unit: mm) W ΦC ΦA ΦB T Codes PWR05 (0805) PWR06 (1206) PWR10 (2010) PWR12 (2512) ΦA 178.0±1.0 178.0±1.0 178.0±1.0 178.0±1.0 ΦB 60.0±1.0 60.0±1.0 60.0±1.0 60.0±1.0 ΦC 13.5±0.7 13.5±0.7 13.5±0.7 13.5±0.7 W 9.5±1.0 9.5±1.0 13.5±1.0 13.5±1.0 T 11.5±1.0 11.5±1.0 15.5±1.0 15.5±1.0 Paper Tape Emboss Plastic (PCS) Tape (PCS) 5,000 5,000 4,000 4,000 Emboss Plastic Tape Specifications (Unit: mm) Top Tape Φ D0 E B F W Resistor Emboss Tape Codes PWR10 (2010) PWR12 (2512) A±0.10 2.85 3.40 B±0.10 W±0.10 5.45 6.65 12.0 12.0 t A P1 P2 P0 Φ D1=1.5min direction of unreeling E±0.10 1.75 1.75 F±0.05 P0±0.05 P1±0.10 P2±0.05 ΦD0+0.10 T±0.20 5.5 5.5 4.00 4.00 4.00 4.00 2.00 2.00 1.50 1.50 1.00 1.00 Version 2010 http://www.token.com.tw/ rfq token.com.tw 03 of 07 TOKEN PWR Pulse Withstanding Chip Resistors Application & Soldering Notes Today’s electronic devices are becoming smaller and smaller. The requirement, in particular, for pulse withstand capability is growing due to the need to protect sensitive modern electronic systems. To meet this demand Token Electronics have designed a Pulse Withstanding Chip Resistor (PWR Series). The enhanced performance of the chips is made possible by the precise use of the best resistance inks and a closely controlled production process. Application Notes:  Applications vary from line protection for telecommunications to surge withstanding resistors for use in circuit breakers. Details of a typical telecomm and power supply application are given below.  Telephone lines can be subjected to a large range of voltage disturbances, many of which can damage switching equipment. This has led to the need for circuit protection against both high voltage transients, usually of short duration caused by lighting strikes and overloads of longer duration, due to direct connection to mains power lines.  These two faults are separated into primary and secondary protection. - Primary protection handles the high voltage transients, and is usually located within the exchange. - Secondary protection is usually built into the equipment to be protected, and deals with both current and voltage limiting.  Voltage limiting prevents damage to the equipment and shock hazards, and current limiting prevents damage to wiring.  To determine the suitability of a PWC series chip resistors for your application refer to the pulse withstanding data as given lighting surge performance using both 1.2/50μs and 10/700μs pulse shapes. Soldering Notes:  Electrical connection to a ceramic substrate or to a printed circuit board can be made by reflow or wave soldering of wrap-around terminations.  Wrap-around terminations provide good leach properties and ensure reliable contact.  Due to the robust construction, the PWR can be immersed in the solder bath for 30 seconds at 260°C.  This enables the resistor to be mounted on one side of a printed circuit board and wire-leaded components applied on the other side.  PWR resistors themselves can operate at a maximum temperature of 155°C.  For soldered resistors, the joint temperature should not exceed 110°C.  This condition is met when the stated power levels at 70°C and recommended pad and trace areas are used.  Allowance should be made if smaller areas of copper are used. 04 of 07 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN PWR Pulse Withstanding Chip Resistors 100 Environmental Characteristics Power Ration (%) 80 60 40 30 20 0 0 20 40 60 70 80 100 120 140 160 180 Ambient Temperature (°C) Test Item Short Time Overload Specification ±0.5% Test Method JIS-C-5202-5.5 RCWV*2.5 or Max Overloading Voltage, 5 seconds MIL-STD-202F Method 107G -55°C~150°C, 100 cycles MIL-STD-202F Method 304 +25/-55/+25/+125/+25°C MIL-STD-202F Method 108A RCWV, 70°C, 1.5 hours ON, 0.5 hours OFF, total 1000~1048 hours MIL-STD-202F Method 103B 40°C, 90~95%RH, RCWV 1.5 hours ON, 0.5 hours OFF, total 1000~1048 hours JIS-C-5202-7.2 96 hours @ +155°C without load JIS-C-5202-7.1 1hour,-65°C followed by 45 minutes of RCWV JIS-C-5202-6.1.4 Bending Amplitude 3mm for 10 seconds MIL-STD-202F Method 210E 260±5°C, 10±1seconds MIL-STD-202F Method 208H 245°C±5°C, 3±0.5(sec) MIL-STD-202F Method 301 Apply Max Overload Voltage for l minute MIL-STD-202F Method 302 Apply 100VDC for 1minute Thermal Shock Temperature Coefficient of Resistance Load Life ±0.5% As Spec. ±1% Humidity (Steady State) ±0.5% Resistance to Dry Heat Low Temperature Operation Bending Strength Resistance to Soldering Heat Solderability Dielectric Withstand Voltage Insulation Resistance ±0.5% ±0.5% As Spec. ±0.5% 95% min coverage As Spec. >1000MΩ Note: Storage Temperature: 25±3°C; Humidity: