RCN0610R103JP

TOKEN FCR, RCA, RCN Chip Resistors Surface Mount Chip Resistors Token has introduced precision surface-mount resistor networks, chip array, and flip-chips. Preview Token has introduced precision surface-mount resistor networks, chip array, and flip-chips. Those no-lead packages are optimized to meet new automotive industry requirements for temperature and humidity, while offering high repeatability and stable performance for industrial, telecommunication, and consumer electronics. Suitable for processing on automatic SMD assembly systems, those new devices are RoHS-compliant and compatible with lead (Pb)-free and tin/lead (Sn/Pb) reflow and vapor-phase soldering processes. Flip Chip Resistor FCR Series: ● The resistor flip chip configurations (FCR Series) are available in industry standard EIA0603, EIA0805,and EIA1206. ● Power Rating 1/10W, 1/8W, and 1/4W are available in max. voltage 100V, 300V, and 300V respectively. ● Resistance tolerance is tight to F(± 1%), J(± 5%) with resistance range 1Ω to 10MΩ. Resistor Chip Array RCA Series: ● Its small 1.6mm by 3.2mm package enables the design of high-density circuits. ● The resistor chip array (RCA Series) offers a low cost when compared to using four high-precision resistors. ● The devices feature precision ratio tolerances to F(± 1%), G(± 2%), and J(± 5%) are available with resistance range 10Ω to 1MΩ. Resistor Networks RCN Series: ● The (RCN) resistor networks offer a resistance range from 10Ω to 1MΩ at operating temperature range -55°C~+125°C. ● All devices offer power ratings of 1/16W at +70°C per resistor, custom configurations of the devices are available. Full line products meet RoHS compliant. Detailed specifications, both mechanical and electrical, please contact our sales representative for more information. Version 2010 http://www.token.com.tw/ rfq token.com.tw 01 of 06 TOKEN FCR Series Dimensions (Unit: mm) FCR, RCA, RCN Chip Resistors L 124 L1 L2 W H Dimensions Type FCR 03 FCR 05 FCR 06 L 1.60 ± 0.10 2.00 ± 0.15 3.10 ± 0.15 W 0.80 ± 0.10 1.25 ± 0.15 1.55 ± 0.15 H 0.45 ± 0.10 0.50 ± 0.10 0.55 ± 0.10 L1 0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.25 L2 0.30 ± 0.20 0.35 ± 0.15 0.50 ± 0.25 FCR Series Dimensions (Unit: mm) L2 L1 W 124 Q L P R1 R2 R3 R4 H R1=R2=R3=R4 Type RCA03-4D (0603) L 3.2±0.2 W 1.6±0.15 H 0.5±0.1 L1 0.30±0.15 L2 0.35Max P 0.8±0.1 Q 0.5±0.1 FCR Series Dimensions (Unit: mm) L1 L2 W S Circuit R Circuit S473 H Q L P Type RCN06-10R RCN06-10S L 6.4 ± 0.2 W 3.1 ± 0.2 H 0.55 ± 0.1 L1 0.5 ± 0.3 L2 0.5 ± 0.2 P 1.27 ± 0.1 Q 0.8 ± 0.2 02 of 06 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN FCR Series Electrical Specifications Type FCR 03 FCR 05 FCR 06 Power Ratingat 70°C 1/10W 1/8W 1/4W FCR, RCA, RCN Chip Resistors Max. Max. Overload RCWV Voltage 50V 150V 200V 100V 300V 300V Resistance Tolerance(%) ± 1% (F) ± 5% (J) ± 1% (F) ± 5% (J) ± 1% (F) ± 5% (J) Resistance Range (Ω) Min. Max. 10Ω 1MΩ 1Ω 10MΩ 10Ω 1MΩ 1Ω 10MΩ 10Ω 1MΩ 1Ω 10MΩ Standard ResistanceValues E-96 E-24 E-96 E-24 E-96 E-24 RCA Series Electrical Specifications Rated Power at70°C 0.063 Max. Max. T.C.R. Working Overload (ppm/°C) Voltage Voltage 50V 100V ± 200 Resistance Range G(±2%) F(±1%) J(±5%) E-96 E-24 100Ω~470KΩ 10Ω~1MΩ Jumper Jumper Rated Resistance Current Value 1A 50mΩ MAX Operating Temperature Range -55°C~+125°C Type RCA03-4D (0603) RCN Series Electrical Specifications Type Rated Power at70°C Resistance Max. Max. T.C.R. Range Working Overload (ppm/°C) Voltage Voltage J (±5%) E-12 50V 100V ±200 10Ω~1MΩ Number of Terminals 10 Number of Elements 8 Operating Temperature Range -55°C~+125°C RCN06-10R 1/16W RCN06-10S Version 2010 http://www.token.com.tw/ rfq token.com.tw 03 of 06 TOKEN Environmental Characteristics Item DC Resistance Temperature Coefficient of Resistance(TCR) Short Time Overload Specification J: ±5%, F: ±1% J: ±200ppm/°C F: ±100ppm/°C FCR, RCA, RCN Chip Resistors Test Method JIS C 5202 5.1 JIS C 5202 5.2 / IEC 115-1 4.8.4.2; T1 T2 Test emperature: 25°C→-55°C 25°C →-55°C JIS C 5202 5.5 / IEC 115-1 4.13; 2.5xRated voltage (Max. Overload Voltage) for 5 sec. measure resistance after 30 minutes JIS C 5202 6.4 / IEC 115-1 4.18; With 260 ± 5 °C for 10 ± 1 sec. JIS C 5202 7.4 / IEC 115-1 4.17; After immersing flux, dip in the 235 ± 5°C molten solderbath for 2 ± 0.5 sec. JIS C 5202 7.4 / IEC 115-1 4.19; Repeat 5 cycles as follow; -55°C(30minutes)+25°C(10~15minutes) +125°C(30minutes)+25°C(10~15minutes) JIS C 5202 6.1; 500g for 10 seconds JIS C 5202 7.10 / IEC 115-1 4.25.1; Permanent resistance change after 1000+48/-0 hours (1.5 hours ON,0.5hour OFF) at RCWV or Max. Keep the element at 70 ± 3°Cambient JIS C 5202 7.9 / IEC 115-1 4.24.2; Maintain the temperature of the element at 40 ± 2 °Cand 90~95% RH with the ratedvoltage applied. Cycle ON for 1.5hours and Off for 0.5 hour for 1000+48/-0 hours.After one hour, measure the resistance value. JIS C 5202 5.8; 2.5xRated Voltage(Max.OverloadVoltage), 1secON,25sec OFF, test 10,000 cycles J:ΔR≤ ± (2%+0.1Ω) F:ΔR≤ ± (1%+0.05Ω) J:ΔR≤ ± (1%+0.1Ω) F:ΔR≤ ± (0.5%+0.05Ω) No mechanical damage Over 95% of termination must becovered with solder J:ΔR≤ ± (1%+0.1Ω) F:ΔR≤ ± (0.5%+0.05Ω) No mechanical damage ΔR≤ ± (0.5%+0.05Ω) No mechanical damage J:ΔR≤ ± (3%+0.1Ω) F:ΔR≤ ± (1%+0.05Ω) Resistance to Solder Heat Solderability Temperature Cycle Terminal Strength Load Life Load Life Humidity J:ΔR≤ ± (3%+0.1Ω) F:ΔR≤ ± (1%+0.05Ω) ΔR≤ ± (5%+0.1Ω) No mechanical damage Intermittent Overload Marking 124 3 digit marking for E24(J) 100~10Ω 122~1.2KΩ 473~47KΩ 105~1MΩ 1542 4 digit marking for E96(F) 22R1~22.1Ω 1020~102Ω 1542~15.4KΩ 02C 3 digit marking for E96(F) 02C 102102=10.2KΩ 15E 15E 140104=1.4MΩ 04 of 06 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN Tape Specifications (Unit: mm) FCR, RCA, RCN Chip Resistors P0 P2 E WF G P1 A E 1.75±0.10 1.75±0.10 1.75±0.10 P1 4.0±0.1 4.0±0.1 4.0±0.1 P2 2.00±0.05 2.00±0.05 2.00±0.05 P0 4.0±0.1 4.0±0.1 4.0±0.1 D 1.5±0.1 -0 1.5±0.1 -0 1.5±0.1 -0 G 2.75 2.75 2.75 B D Codes FCR03 FCR05 FCR06 A 1.10±0.20 1.65±0.20 2.00±0.10 -0.15 B 1.90±0.20 2.45±0.20 3.57±0.10 -0.15 W 8.0±0.3 8.0±0.3 8.0±0.3 F 3.50±0.05 3.50±0.05 3.50±0.05 Tape Specifications (Unit: mm) T B N D C G Symbol Dimension How to Order A 178 ± 2.0 B 20 ± 0.5 C 13.0 ± 0.5 A D 20 min. G 100 ± 1.5 N 80.0 ± 0.5 T 14.9 max. RCN  06  10  R  103  J  TRS   Type: SMD Network  Size: 06 (6.40×3.10mm)  Number of Terminals: 10  Circuit Structure: R Circuit,S Circuit  Nominal Resistance Code 3-Digit Resistance Tolerance E12 Series EX 10Ω=100 100Ω=101 http://www.token.com.tw/  Resistance Tolerance (%) Code J Resistance Tolerance ±5% Package Taping Reel Bulk  Package Code TR P Version 2010 rfq token.com.tw 05 of 06 TOKEN How to Order FCR, RCA, RCN Chip Resistors 03  100  J  TR   Resistance Tolerance Size (mm) 1.60×0.80 2.00×1.25 3.10×1.55 Code F J Resistance Tolerance ±1% ±5% FCR   Part Number: FCR  Size Code 03 05 06  Nominal Resistance Code SMD Elements Nominal Resistance E24 Series 3-Digit EX 10Ω=100 47Ω=470 E96 Series 4-Digit EX 10.2Ω=10R2 10KΩ=1002 000  Package Code TR P Package Taping Reel Bulk Jumper How to Order RCA  03  4  D  101  J  TR   Part Number: RCA  Size: 03 (3.20×1.60mm)  Number of circuits: 4 (4 circuits)  Electrode Structure: D (protruding electrode)  Nominal Resistance Code SMD Elements Nominal Resistance E24 Series 3-Digit EX 10Ω=100 47Ω=470 E96 Series 4-Digit EX 10.2Ω=10R2 10KΩ=1002 000  Resistance Tolerance Code F G J Resistance Tolerance ±1% ±2% ±5%  Package Code TR P Package Taping Reel Bulk Jumper Back to 1st Page - Surface Mount Resistors FCR, RCA, RCN 06 of 06 http://www.token.com.tw/ rfq token.com.tw Version 2010