TCB4F-617DB1675

TOKEN SMD BALUN TRANSFORMERS Token Electronics Industry Co., Ltd. Taiwan: No. 137, Sec. 1, Chung Shin Rd., Wu Ku Hsiang, Taipei Hsien, Taiwan, R.O.C TEL: 886-2-2981 0109; FAX: 886-2-2988 7487 China: 12F, Zhongxing Industry Bld., Chuangye Rd., Nanshan District, Shenzhen, Guangdong TEL: 86-755-2605 5363, 2605 5364; FAX: 86-755-2605 5365 http://www.token.com.tw rfq token.com.tw Product Index Information General Information ----------------------------------------------------------------------------- 01 RF Balun & SMD EMI Filters TCB4F Series - SMD Common Mode Balun Transformers ------------------------- 03 TCB5F Series - Surface Mount RF Balun Transformer ------------------------------- 09 TCB5FL Series - SMD Balun Transformer ------------------------------------------------ 13 TCPWC Series - EMI Filters SMD Common Mode Choke ---------------------------- 16 Notice: Specification Changed or Version Updated will be posted at irregular intervals. All Updated and Final Specifications, Please Confirm with TOKEN ELECTRONICS REPRESENITIVES. : : rfq token.com.tw http://www.token.com.tw TOKEN Balun Transformer General Information Surface Mount Balun Transformer General Infornation What is Balun Transformer? Balun is name of device that can be like a common mode choke, unbalance to balance transformer, or a step up or down transformer. Balun is an acronym of BALanced UNbalanced, it’s used to convert an unbalanced signal to a balanced one or vice versa. A balun transformer is a device that: ● joins a balanced line (one that has two conductors, with equal currents in opposite directions, such as a twisted pair cable). ● to an unbalanced line (one that has just one conductor and a ground, such as a coaxial cable). Baluns isolate a transmission line and provide a balanced output. A typical use for a balun is in a television antenna. Balanced: A method of transmitting signals using two signal lines. One line carries the source signal; the other carries a signal of opposite phase (antiphase). Unbalanced: A method of transmitting signals using one signal line, with a ground line providing a reference potential. Why Use a Balun? Baluns are used for two primary reasons: ● One : Eliminate “common mode current” on the transmission line. ● Two : Matching antenna impedance to the transmission line. Version 2010 http://www.token.com.tw/ rfq token.com.tw 01 of 21 TOKEN Balun Transformer General Information Insertion Loss (dB) Loss due to transmission from primary dot port to secondary dot port and secondary port. Most balun transformers are symmetrical through their central horizontal axis, therefore, an input can be applied at the primary dot port or the primary port with differential outputs at the secondary dot and secondary ports. Basics of Broadband Transformers There are two kinds of broadband transformers. One is known as a conventional type, which has separate primary and secondary windings, as do power and audio transformers. The other type is called a transmission-line transformer. It is believed that the latter variety is the most efficient of the two. Transmission-line transformers are wound with twisted or parallel windings and produce specific integers of impedance transformation, such as 4:1, 9:1, and 16:1. Conventional transformers permit you to obtain any transformation ratio you need. Applications of Balun Transformers In a balun transformer, one pair of terminals is balanced, that is, the currents are equal in magnitude and opposite in phase. The other pair of terminals is unbalanced; one side is connected to electrical ground and the other carries the signal. Balun transformers can be used between various parts of a wireless or cable communications system. Some common applications denotes as following: ● Television receiver (Balanced) - coaxial cable network or Coaxial antenna system (Unbalanced) ● FM broadcast receiver (Balanced) - Coaxial antenna system (Unbalanced) ● Dipole antenna (Balanced) - Coaxial transmission line (Unbalanced) ● Parallel-wire transmission line (Balanced) - Coaxial transmitter output, or Coaxial receiver input (Unbalanced) Token’s baluns provide impedance transformation in addition to conversion between balanced and unbalanced signal modes. Most television and FM broadcast receivers are designed for 300-ohm balanced systems, while coaxial cables have characteristic impedances of 50 or 75 ohms. Impedance-transformer baluns with larger ratios are available and used to match high-impedance balanced antennas to low-impedance unbalanced wireless receivers, transmitters, or transceivers. 02 of 21 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TCB4F SMD Balun Transformers SMD Common Mode Balun Transformers SMD Common Mode Balun Transformers For USB - TCB4F Series Surface Mount Common Mode Balun Transformer (TCB4F) For USB Preview Token Electronics has introduced SMD common mode transformers (balun transformers) in 3.8 x 4.4 mm compact size, which are used to convert between unbalanced-balanced signals in the antenna inputs of tuner circuits for terrestrial digital broadcast compatible compact devices. Up to now balun transformers have been made by winding wire around a spectacle-shaped ferrite core, and are widely used in electronic devices such as TVs and desktop PCs. Token SMD choke coils common mode TCB4F series are primarily designed for choking power lines and conform to the RoHS compliant and Lead-free. SMD TCB4F can be customed designs and tighter tolerances available on request. Windings use paired or and triple wires for high uniformity. Base pins are end proccessed to allow direct mounting on PCB. Ideal for use in double balanced mixers, and as broad band transformers, transistors and for impedance conversion. Application of SMD choke coils specific designs also available including different inductance values and Q specifications adjusted to frequency requirements. Token is equipped to design and produce custom components to meet many design and reliability demands. Custom parts are available on request. Token will also produce devices outside these specifications to meet specific customer requirements, please contact our sales for more information. Features : - Pair and triple wire coil for high stability and high balance. - Available in tape & reel for automatic surface mounting.. Applications : - Double Balance Mixers. - Broad-Band Transformers. - Impedance Transformers. - Common Mode Filter, Balun Transformers. Version 2010 http://www.token.com.tw/ rfq token.com.tw 03 of 21 TOKEN Configurations & Dimensions TCB4F SMD Balun Transformers D C E H F J Land Pattern I   Type TCB4F A 3.8 B(max) 4.4 B  L H 2.7 I 4.4 J 1.3 K 3.0 K L 1.0 μiac 300 300 300 300   G C(max) 3.2 D 2.0 E(max) 5.5 F 0.45 G 3.0 Note: Design as Customer’s Requested Specifications. (TCB4F - 617DB) Electrical Characteristics A Part Number TCB4F - 617DB1673 TCB4F - 617DB1674 TCB4F - 617DB1675 TCB4F - 617DB1714 Winding Turns 1-6=2-4=2-6=3-4 2 1/2 T 3 1/2 T 4 1/2 T 5 1/2 T (TCB4F - 617DB) Test Circuit A Port1     Port2 100Ω Port3 100Ω 50Ω  04 of 21 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TCB4F SMD Balun Transformers (TCB4F - 617DB) Typical Characteristics A TCB4F-617DB-1673 (Impedance Ratio=50Ω:200Ω ) 0 1 2 3 4 5 6 7 8 9 10 TCB4F-617DB-1714 (Impedance Ratio=50Ω:200Ω ) 0 1 2 3 4 5 6 7 8 9 10 Port1~Port3 Port1~Port2 Insertion Loss (dB) Port1~Port3 1 10 100 Frequency (MHz) 1000 3000 Insertion Loss (dB) Port1~Port2 1 10 100 Frequency (MHz) 1000 3000 (TCB4F - 617DB) Electrical Characteristics B Part Number TCB4F - 617DB1653 TCB4F - 617DB1654 TCB4F - 617DB1655 TCB4F - 617DB1724 Winding Turns 2 1/2 T 3 1/2 T 4 1/2 T 5 1/2 T μiac 300 300 300 300 (TCB4F - 617DB) Test Circuit B Port1 50Ω      Port2 50Ω Version 2010 http://www.token.com.tw/ rfq token.com.tw 05 of 21 TOKEN 0 1 2 3 4 5 6 7 8 9 10 TCB4F-617DB-1653 (50Ω:50Ω ) TCB4F SMD Balun Transformers (TCB4F - 617DB) Typical Characteristics B TCB4F-617DB-1654 (50Ω:50Ω ) 1 10 100 Frequency (MHz) 1000 3000 0 1 2 3 4 5 6 7 8 9 10 Insertion Loss (dB) Insertion Loss (dB) 1 10 100 Frequency (MHz) 1000 3000 TCB4F-617DB-1655 (50Ω:50Ω ) 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 Insertion Loss (dB) Insertion Loss (dB) 1 10 100 Frequency (MHz) 1000 3000 TCB4F-617DB-1724 (50Ω:50Ω ) 1 10 100 Frequency (MHz) 1000 3000 (TCB4F - 617DB) Electrical Characteristics C Part Number TCB4F - 617DB1643 TCB4F - 617DB1644 TCB4F - 617DB1645 TCB4F - 617DB1646 Winding Turns 2 1/2 T 3 1/2 T 4 1/2 T 5 1/2 T μiac 1500 1500 1500 1500 (TCB4F - 617DB) Electrical Characteristics C Port1    Port2   50Ω 06 of 21 50Ω http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TCB4F SMD Balun Transformers (TCB4F - 617DB) Typical Characteristics C TCB4F - 617DB-1643 (50Ω:50Ω ) 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 Insertion Loss (dB) Insertion Loss (dB) 1 10 100 Frequency (MHz) 1000 3000 TCB4F - 617DB-1644 (50Ω:50Ω ) 1 10 100 Frequency (MHz) 1000 3000 TCB4F - 617DB-1645 (50Ω:50Ω ) 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 Insertion Loss (dB) Insertion Loss (dB) TCB4F - 617DB-1646 (50Ω:50Ω ) 1 10 100 Frequency (MHz) 1000 3000 1 10 100 Frequency (MHz) 1000 3000 (TCB4F - 617PT) Electrical Characteristics Part Number TCB4F - 617PT1667 TCB4F - 617PT1669 TCB4F - 617PT1699 TCB4F - 617PT1664 Winding Turns 1-2=2-3=4-6 2T 3T 4T 5T μiac 300 300 300 300 (TCB4F - 617PT) Test Circuit Port1 50Ω      Port2 100Ω Port3 100Ω Version 2010 http://www.token.com.tw/ rfq token.com.tw 07 of 21 TOKEN TCB4F SMD Balun Transformers (TCB4F - 617PT) Typical Characteristics TCB4F-617PT-1667 (Impedance Ratio=50Ω:200Ω ) 0 1 2 3 4 5 6 7 8 9 10 Insertion Loss (dB) TCB4F-617PT-1664 (Impedance Ratio=50Ω:200Ω ) 0 1 2 3 4 5 6 7 8 9 10 1 Insertion Loss (dB) Port1~Port2 Port1~Port3 10 100 Frequency (MHz) 1000 3000 Port1~Port2 1 10 Port1~Port3 100 1000 3000 Frequency (MHz) How to Order TCB4F   Part Number: TCB4F  Type Code 617DB1673  Type 617DB1673 617PT1667 617DB1653 617DB1643 Frequency mixer Frequency mixer Balun Transformers Balun Transformers Back to 1st Page - SMD Common Mode Balun Transformers (TCB4F) 08 of 21 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TCB5F RF Balun Transformer Surface Mount RF Balun Transformers Surface Mount RF Balun Transformer (TCB5F) Common Mode Preview Token utilizes the latest winding technology using paired wires for high uniformity and enabling the most costeffective designs in manufacturing common mode surface mount RF balun transformer products. Base pins are end proccessed to allow direct mounting on PCB. Ideal for use in double balanced mixers, and as broad band transformers, transistors and for impedance conversion. Token RF Balun Transformer TCB5F series are primarily designed for choking power lines and conform to the RoHS compliant and Lead-free. SMD TCB5F feature with ultra-compact size, wide inductance selection, and low-resistance coils. SMD choke coils can be customed designs and tighter tolerances available on request. Application of Balun Transformer specific designs also available including different inductance values and Q specifications adjusted to frequency requirements. Token is equipped to design and produce custom components to meet many design and reliability demands. Custom parts are available on request. Token will also produce devices outside these specifications to meet specific customer requirements, please contact our sales for more information. Features : - Pair wire coil for high stability. Applications : - Double Balance Mixers, Broad-Band Transformers; - Impedance Transformers, Balun Transformers. Version 2010 http://www.token.com.tw/ rfq token.com.tw 09 of 21 TOKEN Configurations & Dimensions TCB5F RF Balun Transformer Recommended Patterns A     C E F G H Type TCB5F A (max) B (max) C (max) 6.9 6.9 4.4 D 4.0 E 3.8 F 0.6 G 5.7 H 1.7 I J  B D I 1.2 J 4.0 Note: Design as Customer’s Requested Specifications. (TCB5F - 458DB) Electrical Characteristics Part Number TCB5F - 458DB1614 TCB5F - 458DB1615 TCB5F - 458DB1616 Winding Turns 1-6=2-4=2-6=3-4 2 1/2 T 3 1/2 T 4 1/2 T μiac 300 300 300 (TCB4F - 617DB) Test Circuit A Port1  Port2 100Ω Port3 100Ω    50Ω  10 of 21 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN (TCB5F - 458DB) Typical Characteristics TCB5F RF Balun Transformer TCB5F-458DB-1614 (Impedance Ratio=50Ω:200Ω) 0 1 2 3 4 5 6 7 8 9 10 Insertion Loss (dB) Port1~Port2 Port1~Port3 TCB5F-458DB-1616 (Impedance Ratio=50Ω:200Ω) 0 1 2 3 4 5 6 7 8 9 10 Insertion Loss (dB) Port1~Port3 Port1~Port2 1 10 100 1000 3000 Frequency (MHz) 1 10 100 1000 3000 Frequency (MHz) (TCB4F - 617DB) Electrical Characteristics B Part Number TCB5F - 458PT1619 TCB5F - 458PT1586 TCB5F - 458PT1587 TCB5F - 458PT1565 Winding Turns 1-2=2-3=4-6 2T 3T 4T 5T μiac 300 230 230 230 (TCB5F - 458PT) Test Circuit Port1     Port2 100Ω Port3 100Ω 50Ω  Version 2010 http://www.token.com.tw/ rfq token.com.tw 11 of 21 TOKEN (TCB5F - 458PT) Typical Characteristics TCB5F RF Balun Transformer TCB5F-458PT-1619 (Impedance Ratio=50Ω:200Ω) 0 1 2 3 4 5 Port1~Port3 6 7 Port1~Port2 8 9 10 1 10 100 1000 3000 Frequency (MHz) TCB5F-458PT-1586 (Impedance Ratio=50Ω:200Ω) 0 1 2 3 4 5 6 7 8 9 10 Insertion Loss (dB) Insertion Loss (dB) Port1~Port2 Port1~Port3 1 10 100 1000 3000 Frequency (MHz) TCB5F-458PT-1587 (Impedance Ratio=50Ω:200Ω) 0 1 2 3 4 5 6 7 8 9 10 Insertion Loss (dB) TCB5F-458PT-1565 (Impedance Ratio=50Ω:200Ω) 0 1 2 3 4 5 6 7 8 9 10 Insertion Loss (dB) Port1~Port3 Port1~Port2 Port1~Port3 Port1~Port2 1 10 100 1000 3000 Frequency (MHz) 1 10 100 1000 3000 Frequency (MHz) How to Order TCB5F   Part Number: TCB4F  Type Code 458DB1614  Type 458DB1614 458DB1615 458PT1619 458PT1586 Frequency mixer Frequency mixer Frequency mixer Frequency mixer Back to 1st Page - Surface Mount RF Balun Transformer (TCB5F) 12 of 21 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TCB5FL SMD Balun Transformer SMD Balun Surface Mount Transformer SMD Balun Transformer (TCB5FL) Common Mode Preview A Balun is a device which converts balanced impedance to unbalanced and vice versa. In addition, baluns can also provide impedance transformation, hence the name Balun Transformers. Token utilizes the latest winding technology using paired wires for high uniformity and enabling the most costeffective designs in manufacturing SMD balun transformer products. Token SMD common mode TCB5FL balun transformer series are primarily designed for choking power lines and conform to the RoHS compliant and Lead-free. SMD TCB5FL feature with ultra-compact size, wide inductance selection, and low-resistance coils. SMD TCB5FL can be customed designs and tighter tolerances available on request. Application of SMD balun transformer specific designs also available including different inductance values and Q specifications adjusted to frequency requirements. Base pins are end proccessed to allow direct mounting on PCB. Ideal for use in double balanced mixers, and as broad band transformers, transistors and for impedance conversion. Token will also produce devices outside these specifications to meet customer requirements, with comprehensive application engineering and design support available for customers worldwide. Features : - Pair wire coil for high stability. Applications : - Double Balance Mixers, Broad-Band Transformers; - Impedance Transformers, Balun Transformers , etc.. Version 2010 http://www.token.com.tw/ rfq token.com.tw 13 of 21 TOKEN Configurations & Dimensions TCB5FL SMD Balun Transformer A      B C E Recommended Patterns F G Type TCB5FL A (max) 6.9 B (max) 6.9 C (max) 3.6 D D 4.0 E 5-0.6 F 5.7 G 1.7 H I H 1.2 I 4.0 Note: Design as Customer’s Requested Specifications. (TCB5FL) Common Mode Electrical Characteristics Part Number TCB5FL - 616DB1196 TCB5FL - 616DB1197 TCB5FL - 616DB1198 Winding Turns 1-6=2-4=2-6=3-4 2 1/2 T 3 1/2 T 4 1/2 T μiac 300 300 300 (TCB4F - 617DB) Test Circuit A Port1 50Ω      Port2 100Ω Port3 100Ω 14 of 21 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TCB5FL SMD Balun Transformer (TCB5F - 458DB) Typical Characteristics TCB5F-616DB-1196 (Impedance Ratio=50Ω:200Ω) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 TCB5F-616DB-1197 (Impedance Ratio=50Ω:200Ω) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 Insertion Loss (dB) Port1~Port2 Port1~Port3 Insertion Loss (dB) Port1~Port2 Port1~Port3 1 10 100 1000 3000 Frequency (MHz) 1 10 100 Frequency (MHz) 1000 3000 TCB5F-616DB-1198 (Impedance Ratio=50Ω:200Ω) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 Insertion Loss (dB) Port1~Port2 Port1~Port3 1 10 100 Frequency (MHz) 1000 3000 How to Order TCB5F   Part Number: TCB5FL  Type Code 616DB1196  Type 616DB1196 616DB1197 Frequency mixer Frequency mixer Back to 1st Page - SMD Balun Transformer (TCB5FL) Common Mode Version 2010 http://www.token.com.tw/ rfq token.com.tw 15 of 21 TOKEN TCPWC EMI Filters SMD Choke SMD EMI Filters Common Mode Choke Preview Token EMI filters SMD common mode choke TCPWC series are primarily designed for choking power lines and conform to the RoHS compliant and Lead-free. SMD choke EMI filters feature with ultra-compact size, wide inductance selection, and low-resistance coils. SMD TCPWC can be customed designs and tighter tolerances available on request. Token’s TCPWC taking advantage of the latest winding technology consists ferrite core and a pair lines enabling the most effective in noise suppression designs. Feature high common-mode impedance at noise band and low differential-mode impedance at signal band. Low differential-mode impedance with high coupling factor, there is almost no distortion on high speed signal. Application of SMD choke EMI filters specific designs also available including different inductance values and Q specifications adjusted to frequency requirements. Token will also produce devices outside these specifications to meet customer requirements, with comprehensive application engineering and design support available for customers worldwide. Applications : - USB Line for Personal Computers and Peripheral. - IEEE 1394 Line for Personal Computers ,DVC ,STB. - LCD Panels. Low-Voltage Differential Signal (LVDS). - EMI Radiation Noise Suppression for Any Electronic Device. 16 of 21 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN Configurations & Dimensions TCPWC EMI Filters SMD Choke TCPWCH Enamel-insulated wire Terminal TYPE TCPWCH05 TCPWCH06 A 2.0±0.2 3.2±0.2 Electrical Characteristics Part Number TCPWCH05MT670 TCPWCH05MT900 TCPWCH05MT121 TCPWCH05MT181 TCPWCH05MT201 TCPWCH05MT261 TCPWCH05MT371 TCPWCH06MT900 TCPWCH06MT161 TCPWCH06MT261 TCPWCH06MT601 TCPWCH06MT102 TCPWCH06MT222 Impedance (Ω) 100MHz 67 90 120 180 200 260 370 90 160 260 600 1000 2200 DCR (Ω)(max) 0.25 0.35 0.30 0.35 0.35 0.40 0.40 0.30 0.40 0.50 0.80 1.00 1.20 Version 2010 B E A F E G B 1.2±0.2 1.6±0.2 C 1.2±0.2 1.8±0.2 E 0.45 0.60 F 1.2 2.0 G 0.4 0.6 C KH K I J I Note: Operating Temp.: -40°C+85°C. Ferrite H 0.8 1.6 I 0.4 0.6 J 0.4 0.4 K 0.90 1.05 Rated Current Rated Voltage Withstanding (mA)(max) (V)(DC) Voltage (V)(DC) 400 330 370 330 330 300 280 370 340 310 260 230 200 50 50 50 50 50 50 50 50 50 50 50 50 50 125 125 125 125 125 125 125 125 125 125 125 125 125 Insulation Resistance (MΩ)(min) 10 10 10 10 10 10 10 10 10 10 10 10 10 http://www.token.com.tw/ rfq token.com.tw 17 of 21 TOKEN Packaging Quantity & Reel Specifications TCPWC EMI Filters SMD Choke 1.2±0.2 D:21.8±0.8 Label 180 -3 60+1 -0 D:13.0±0.3 2.0±0.5 Reel Specifications 9.5±0.50 11.4±1.0 Type TCPWCH05 TCPWCH06 Emboss Plastic Tape (PCS) 2000 2000 +0 Emboss Plastic Tape Specifications Top Tape A Φ D0 E B F W Resistor Emboss Tape A ±0.10 1.40 1.90 B ±0.05 2.55 3.50 W ±0.20 8.0 8.0 E ±0.10 1.75 1.75 T P1 P2 P0 Φ D1 1.5min direction of unreeling Codes TCPWCH05 TCPWCH06 F ±0.10 3.5 3.5 P0 ±0.10 4.00 4.00 P1 ±0.10 4.00 4.00 P2 ±0.10 2.00 2.00 ΦD0 +0.10 1.50 1.50 t ±0.10 1.35 2.10 18 of 21 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN Leader / Tape TCPWC EMI Filters SMD Choke Trailer End Leader Trailer(80mm min) Empty Compartments with Cover Tape (80mm min) Cover Tape Only 450mm min Peel-off Force 160~180° Top cover tape Base tape The force for tearing off cover tape is 0.05 ~ 0.69(N) in the arrow direction at the following conditions: Temperature: 5 ~ 35°C. Humidity: 45 ~ 85%. Atmospheric pressure: 860 ~ 1060 hpa. (TCB4F - 617DB) Electrical Characteristics C Port1    Port2   50Ω Version 2010 http://www.token.com.tw/ rfq token.com.tw 50Ω 19 of 21 TOKEN Environmental Characteristics Test Items Specifications TCPWC EMI Filters SMD Choke Test Conditions / Test Methods LCR Meter HP 4291B Micro-Ohm meter (GOM-801G) Test Voltage: 2.5 Times Rated Voltage; Testing Time: 60 sec. Charge Current: 0.5mA Test Voltage: Rated Voltage; Testing Time: 1 to 5 sec; Charge Current: 1mA Charge Current: 1 minute 10M ohm min The component should be soldered (232°C±5°C for 10 sec.) totinned copper substrate. Applied force gauge to the side of component It must withstand force of 2 or 4 pounds without failure of the component. Dropping chip by each side and corner; Drop 10 times in total Drop height:100cm; Drop weight:125g The component shall be dipped in a melted solder bath at 235°C±5°C for 5 seconds. 1. Amplitude: 1.5 m/m; 2. Frequency: 10-55-10 Hz(1min); 3. Direction: X, Y, Z; 4. Duration: 2 Hrs/X, Y, Z. 1. Temp: -40°C±C2°C; 2. Time: 1000±48 Hours; 3. Component should be tested after 1 hour at room temperature. Electrical Performance Test Impedance Refer to standard DC Resistance (RDC) electrical characteristic spec. Withstand Voltage (VDC) Rated Voltage Component should not be (VDC) damaged Insulation Resistance (I.R.) Mechanical Performance Test Base: 0805 ≥ 2 Lbs Component Cover: 0805 ≥ 1 Lbs Adhesion Base: 1206 ≥ 4 Lbs (push Test) Cover: 1206 ≥ 2 Lbs Component should not be Drop Test damaged The terminal should at least be Solderability Test 90% covered with solder Vibration Test Component should not be (Low Frequency) damaged Climatic Test Low Temperature Storage Test Thermal Shock Test High Temperature Storage Test Humidity Test High Temperature Load Life Test Low Temperature Load Life Test Impedance change: Within±20% Without distinct damage in ppearance. There should be no evidence of short or open circuit Total: 5 Cycles 1. Temp: 85°C±2°C; 2. Time: 1000±48 Hours; 3. Component should be tested after 1 hour at room temperature. 1. Temp: 40°C±2°C; 2. R.H.: 90%~95%; 3. Time: 48±2 Hours 1. Temp: 85°C±2°C; 2. Time: 96±12 Hours; 3. Load: Allowed DC Current 1. Temp: -40°C±2°C; 2. Time: 96±12 Hours; 3. Load: Allowed DC Current ROOM TEMP 15MINS -25±2°C 30MINS ROOM TEMP 15MINS -85±2°C 30MINS Note: Storage Temperature: 25±3°C; Humidity: