TPS1608DC

TOKEN TPSDC Chip Low DCR Power Inductors Chip Low DCR Power Inductors Token Introduces Surface Mount Power Inductors Low DCR (TPSDC) Preview To meet the electrical demands of next-generation products such as microprocessors, high-current dc/dc converters and telecom equipment, the TPSDC SMT Power Inductors from Token Electronic targets applications that require wide range inductance, lower DCR and high current. Token TPSDC series of shielded, surface-mount wire-wound inductors features a profile ranging from 2.92 mm, 5.08 mm, to 7.62 mm, and is suited for use in low-profile DC-DC converters and switch-mode power supplies used in power telecommunications systems, industrial controls, and medical instrumentation. All parts are magnetically shielded to avoid electromagnetic interference with surrounding circuitry. Electrical parameters include an inductance of 1.0 μH to 10000.00 μH, resistance of 0.021 ohms to 32.800 ohms, and a rated current of 0.02A to 8.00A. The inductors also operate from -40°C to +85°C. The power inductors are wound around a ferrite core and are particularly suitable for cost-critical mass applications and the surface-mounting capability. The TPSDC series conform to the RoHS directive and Leadfree. Custom parts are available on request for tighter tolerances. Application of shielded inductors specific designs also available including different inductance and frequency specifications adjusted to requirements. Please contact our sales representative for more information. Version 2010 http://www.token.com.tw/ rfq token.com.tw 01 of 07 TOKEN Quick Selection TPSDC Chip Low DCR Power Inductors Characteristics : - Operating temperature range: -40°C ~ +85°C. - Temperature Rise Current (I rms): The actual current when temperature of coil becomes Δ40°C. (Ta = 25°C). - Saturation Rated Current (IDC): The DC current when the inductance becomes 10% lower than its initial value. (Ta = 25°C). Features : - Compact Size and Thin. - Magnetically shielded against radiation. - TPS1608DC used ceramic base with gold-plating. - TPS3316DC and TPS5022DC used LCP plastic base. - TPS3316DC and TPS5022DC designed for the higher current requirements of portable computers. - TPS1608DC is specified to achieve longer battery life significantly in handheld communication devices. Test Equipment : - Electrical specifications at 25°C. - Inductance (L): HP4284A LCR meter. - Direct Current Resistance (DCR): Milli-ohm meter. TPSDC Quick Reference : - Electrical specifications at 25°C. - TPS5022DC 10 μH ~ 1000 μH; 3.9A ~ 0.53A. - TPS3316DC 1.0μH ~ 1000 μH; 5.0A ~ 0.17A. - TPS1608DC 1.0μH ~ 10000μH; 3.0A ~ 0.02A. - Test equipment: L: HP4284A LCR meter; DCR: Milli-ohm meter. Applications : - DC-DC converter, PDA. - Other Various Electronic Appliances. - Notebook, Personal Computers, Cellular Phone. 02 of 07 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TPSDC Chip Low DCR Power Inductors (TPS1608DC) Dimensions & Configurations A C XXX B D E H F J Land Pattern K I G Type TPS1608DC A(max) 6.60 B(max) 4.45 C ± 0.3 4.00 D(max) 2.92 E ± 0.3 1.27 F ± 0.3 1.02 G ± 0.3 H ± 0.3 I J K 4.32 2.50 3.56 1.40 4.06 Note: Design as Customer’s Requested Specifications. (TPS3316DC) Dimensions & Configurations A C D E F J Land Pattern K I TC XXX B G Type TPS3316DC A(max) 12.95 B(max) 9.40 C ± 0.3 8.38 D(max) 5.08 E ± 0.3 2.54 F ± 0.3 2.54 G ± 0.3 7.62 I 2.79 J 2.92 K 7.37 Note: Design as Customer’s Requested Specifications. Version 2010 http://www.token.com.tw/ rfq token.com.tw 03 of 07 TOKEN TPSDC Chip Low DCR Power Inductors (TPS5022DC) Dimensions & Configurations A C B D E F Land Pattern J I K TC XXX G Type TPS5022DC A(max) 18.54 B(max) 15.24 C ± 0.3 12.70 D(max) 7.62 E ± 0.3 2.54 F ± 0.3 2.54 G ± 0.3 12.70 I 2.79 J 2.92 K 12.45 Note: Design as Customer’s Requested Specifications. 04 of 07 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN Part Number TPS1608DC - 1R0M TPS1608DC - 1R5M TPS1608DC - 2R2M TPS1608DC - 3R3M TPS1608DC - 4R7M TPS1608DC - 6R8M TPS1608DC - 100M TPS1608DC - 150M TPS1608DC - 220M TPS1608DC - 330M TPS1608DC - 470M TPS1608DC - 680M TPS1608DC - 101M TPS1608DC - 151M TPS1608DC - 221M TPS1608DC - 331M TPS1608DC - 471M TPS1608DC - 681M TPS1608DC - 102M TPS1608DC - 152M TPS1608DC - 222M TPS1608DC - 332M TPS1608DC - 472M TPS1608DC - 682M TPS1608DC - 103M TPSDC Chip Low DCR Power Inductors (TPS1608DC) Electrical Characteristics Inductance (µH) 1.00 1.50 2.20 3.30 4.70 6.80 10.00 15.00 22.00 33.00 47.00 68.00 100.00 150.00 220.00 330.00 470.00 680.00 1000.00 1500.00 2200.00 3300.00 4700.00 6800.00 10000.00 Tolerance M M M M M M M M M M M M K K K K K K K K K K K K K Test Condition L 100KHz,0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V Q 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V 200KHz, 0.1V DCR (Ω) SRF ref Q (max) (MHz) (min) 0.040 0.045 0.050 0.055 0.060 0.065 0.075 0.090 0.110 0.190 0.230 0.290 0.480 0.590 0.770 1.400 1.800 2.200 3.400 4.200 8.500 11.000 13.900 25.000 32.800 250 125 120 120 105 50 38 33 25 20 20 15 10 9 6 5 4 3 2 2 2 1 1 1 0.8 30 30 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 I rms (A) (max) 3.00 2.80 1.80 1.60 1.40 1.20 1.00 0.80 0.70 0.60 0.50 0.40 0.30 0.26 0.22 0.20 0.19 0.18 0.15 0.12 0.10 0.08 0.06 0.04 0.02 Note: Test Freq.: 100KHz / 0.1V. Current (max) .... 30°C temperature rise. Operating Temp.: -40°C ~ +85°C. Version 2010 http://www.token.com.tw/ rfq token.com.tw 05 of 07 TOKEN Part Number TPS3316DC - 1R0M TPS3316DC - 1R5M TPS3316DC - 2R2M TPS3316DC - 3R3M TPS3316DC - 4R7M TPS3316DC - 6R8M TPS3316DC - 100M TPS3316DC - 150M TPS3316DC - 220M TPS3316DC - 330M TPS3316DC - 470M TPS3316DC - 680M TPS3316DC - 101M TPS3316DC - 151M TPS3316DC - 221M TPS3316DC - 102M TPSDC Chip Low DCR Power Inductors Inductance (µH) 1.00 1.50 2.20 3.30 4.70 6.80 10.00 15.00 22.00 33.00 47.00 68.00 100.00 150.00 220.00 1000.00 DCR (Ω) (max) 0.021 0.022 0.032 0.039 0.054 0.075 0.101 0.150 0.207 0.334 0.472 0.660 1.110 1.550 2.000 8.300 SRF ref IDC (MHz) (A) (max) 140 5.60 120 5.20 80 5.00 70 3.90 40 3.20 38 2.80 35 2.40 25 2.00 19 1.60 15 1.40 13 1.00 10 0.9 7 0.8 6 0.6 5 0.5 2 0.32 I rms (A) (max) 5.0 4.5 3.8 3.3 2.7 2.2 2.0 1.5 1.3 1.1 0.8 0.7 0.6 0.5 0.37 0.17 (TPS3316DC) Electrical Characteristics Tolerance M M M M M M M M M M M M M M M M Test Condition 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V Note: Test Freq.: 100KHz / 0.1V. Operating Temp.: -40°C ~ +85°C. Inductance drop=10% typ. at IDC. (TPS5022DC) Electrical Characteristics Part Number TPS5022DC - 100M TPS5022DC - 150M TPS5022DC - 220M TPS5022DC - 330M TPS5022DC - 470M TPS5022DC - 680M TPS5022DC - 101M TPS5022DC - 151M TPS5022DC - 221M TPS5022DC - 331M TPS5022DC - 471M TPS5022DC - 681M TPS5022DC - 102M Inductance (µH) 10.00 15.00 22.00 33.00 47.00 68.00 100.00 150.00 220.00 330.00 470.00 680.00 1000.00 Tolerance M M M M M M M M M M M M M Test Condition 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V DCR (Ω) (max) 0.040 0.048 0.059 0.075 0.097 0.138 0.207 0.293 0.470 0.780 1.080 1.400 2.010 SRF ref IDC (MHz) (A) (max) 30 8.00 20 7.00 18 6.00 14 5.00 10 4.00 9.0 3.00 7.0 2.40 6.0 2.10 5.0 1.90 4.0 1.10 3.0 1.10 2.5 0.96 2.0 0.80 I rms (A) (max) 3.9 3.4 3.1 2.8 2.4 2.0 1.7 1.3 1.1 0.86 0.73 0.64 0.53 Note: Test Freq.: 100KHz / 0.1V. Operating Temp.: -40°C ~ +85°C. Inductance drop=10% typ. at IDC. 06 of 07 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN How to Order TPSDC Chip Low DCR Power Inductors TPS1608DC  100  M   Part Number: TPS1608DC, TPS3316DC, TPS5022DC  Inductance Code Inductance 1R0 100 101  Tolerance Code 1.00µH 10.00µH 100.00µH Tolerance K L M N 10% 15% 20% 30% Back to 1st Page - Chip Low DCR Power Inductors (TPSDC) Version 2010 http://www.token.com.tw/ rfq token.com.tw 07 of 07