B992AS-220M

づ け Fixed Inductors for Surface Mounting 面実装用固定インダクタ DS84LCB / DS85LCB/ DS86C Inductance Range: 1.0~100μH(DS84LCB), 1.0~100μH(DS85LCB), 1.3~220μH(DS86C) DIMENSIONS／外形寸法図 8.4 Max. ＊ Recommended patterns 推奨パターン図 8.3 Max. 3.0 3.5 8.7 (Unit: mm) (Unit: mm) Note (*) DS84LCB; 4.0mm Max. height DS85LCB; 5.0mm Max. height DS86C ; 6.8mm Max. height FEATURES／特長 • 8.4 × 8.3mm Max. square, 4.0, 5.0, and 6.8mm Max. height). • Magnetically shielded construction and low DC resistance. • Suitable for large currents. • RoHS compliant. • • • • 8.4 × 8.3mm角Max. 高さ4.0, 5.0 および6.8mm Max.) 閉磁路構造､低直流抵抗 大電流対応 RoHS指令対応 MEASUREMENT CONDITION／測定条件 (1) Inductance is measured with a LCR meter 4284A* or equivalent. Test frequency at 100kHz (2) DC Resistance is measured with a Digital Multimeter TR6871 (Advantest) or equivalent. (3) Maximum allowable DC current is that which causes a 10% inductance reduction from the initial value, coil temperature to rise by 40°C, whichever is smaller. (Reference ambient temperature 20°C) * Agilent Technologies (1) インダクタンスはLCRメータ4284A*または同等品により測定す る。 測定周波数は100kHzです。 (2) 直流抵抗はデジタルマルチメータTR6871(Advantest)または同等 品により測定する。 (3) 最大許容電流は､直流重畳電流を流した時インダクタンスの値が 初期値より10％減少する直流電流値、または直流電流により、コ イルの温度が40℃上昇の何れか小さい値です。 (周囲温度20℃を基準とする。） *Agilent Technologies SELECTION GUIDE FOR STANDARD COILS TYPE DS84LCB (Quantity/reel; 500 PCS) 東光品番 TOKO Part Number B1134AS-1R0N B1134AS-1R5N B1134AS-2R2N B1134AS-2R7N B1134AS-3R9N B1134AS-4R7N B1134AS-6R8N B1134AS-100M B1134AS-150M B1134AS-220M B1134AS-330M B1134AS-470M B1134AS-680M B1134AS-101M インダクタンス Inductance (μH) 1.0 1.5 2.2 2.7 3.9 4.7 6.8 10 15 22 33 47 68 100 (1) (1) 許容差 Tolerance (%) ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±20 ±20 ±20 ±20 ±20 ±20 ±20 直流抵抗 (2) DC (2) Resistance (mΩ) Max. (Typ.) 11 (8.9) 13 (11) 17 (15) 19 (16) 24 (20) 30 (25) 43 (36) 57 (47) 80 (66) 120 (100) 170 (140) 255 (210) 340 (285) 460 (385) 直流重畳許容電流 Inductance (3) Decrease Current (A) Max. (Typ.) ΔL =10% L (3) 3.6 2.0 4.1 2.0 温度上昇許容電流 Temperature (3) Rise Current ΔT=40°C (A) Max. (Typ.) 8.0 (9.4) 6.9 (8.1) 5.4 (6.4) 5.3 (6.2) 4.7 (5.5) 4.0 (4.7) 3.3 (3.9) 2.7 (3.1) 2.3 (2.7) 1.8 (2.1) 1.4 (1.7) 1.2 (1.4) 1.0 (1.2) 0.93 (1.0) (3) 8.1 (10.8) 6.6 (8.8) 5.6 (7.5) 4.9 (6.5) 4.3 (5.8) 3.9 (5.2) 3.2 (4.3) 2.8 (3.7) 2.2 (3.0) 1.8 (2.4) 1.5 (2.0) 1.2 (1.6) 1.0 (1.3) 0.83 (1.1) づ け Fixed Inductors for Surface Mounting 面実装用固定インダクタ DS85LCB / DS86C DS85LCB : 8.4 × 8.3mm Max. square, 5.0mm height, Inductance range: 1.0~100μH DS86C : 8.4 × 8.3mm Max. square, 6.8mm height, Inductance range: 1.3~220μH SELECTION GUIDE FOR STANDARD COILS TYPE DS85LCB (Quantity/reel; 500 PCS) 東光品番 TOKO Part Number B1135AS-1R0N B1135AS-1R5N B1135AS-2R2N B1135AS-2R7N B1135AS-3R6N B1135AS-4R7N B1135AS-6R8N B1135AS-100M B1135AS-150M B1135AS-220M B1135AS-330M B1135AS-470M B1135AS-680M B1135AS-101M インダクタンス Inductance (μH) 1.0 1.5 2.2 2.7 3.6 4.7 6.8 10 15 22 33 47 68 100 (1) (1) 許容差 Tolerance (%) ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±20 ±20 ±20 ±20 ±20 ±20 ±20 直流抵抗 (2) DC (2) Resistance (mΩ) Max. (Typ.) 9.6 (8.0) 11 (9.3) 13 (11) 14 (12) 17 (14) 21 (17) 29 (25) 45 (38) 64 (53) 84 (70) 110 (90) 150 (125) 235 (195) 330 (275) 直流重畳許容電流 Inductance (3) Decrease Current (A) Max. ΔL =10% (Typ.) L (3) 温度上昇許容電流 Temperature (3) Rise Current ΔT=40°C (A) Max. (Typ.) 8.5 (10.0) 7.6 (9.0) 7.3 (8.6) 6.5 (7.6) 5.5 (6.5) 5.1 (6.0) 4.0 (4.7) 3.3 (3.8) 2.5 (2.9) 2.3 (2.7) 1.9 (2.3) 1.6 (1.9) 1.3 (1.5) 1.1 (1.3) (3) 7.8 (10.4) 6.3 (8.4) 5.5 (7.3) 4.7 (6.3) 4.2 (5.6) 3.7 (5.0) 3.1 (4.1) 2.4 (3.2) 2.0 (2.7) 1.7 (2.3) 1.4 (1.9) 1.2 (1.6) 0.97 (1.3) 0.79 (1.1) TYPE DS86C (Quantity/reel; 500 PCS) 東光品番 TOKO Part Number B992AS-1R3N B992AS-2R0N B992AS-2R7N B992AS-3R3N B992AS-4R3N B992AS-5R6N B992AS-6R8N B992AS-8R2N B992AS-100M B992AS-150M B992AS-220M B992AS-330M B992AS-470M B992AS-680M B992AS-101M B992AS-151M B992AS-221M インダクタンス Inductance (μH) 1.3 2.0 2.7 3.3 4.3 5.6 6.8 8.2 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 (1) (1) 許容差 Tolerance (%) ± 30 ± 30 ± 30 ± 30 ± 30 ± 30 ± 30 ± 30 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 直流抵抗 (2) DC (2) Resistance (mΩ) Max. 14 15 17 21 22 26 28 30 36 41 74 120 150 210 310 400 560 直流重畳許容電流 Inductance (3) Decrease Current (A) Max. ΔL =10% L (3) 温度上昇許容電流 Temperature (3) Rise Current ΔT=40°C (A) Max. 6.1 6.0 5.5 4.8 4.8 4.3 4.1 3.9 3.6 3.3 2.5 1.9 1.7 1.4 1.1 0.94 0.80 (3) 8.3 6.8 5.9 5.2 4.6 4.1 3.8 3.4 2.9 2.6 2.0 1.6 1.4 1.1 0.98 0.75 0.65