XC6204D

◆CMOS Low Power Consumption ◆Dropout Voltage : 60mV @ 30mA 200mV @ 100mA ◆Maximum Output Current : 150mA (300mA=XC6204 E to H Type) ◆Highly Accurate : ±2% ◆Output Voltage Range : 1.8V ~ 6.0V (XC6204) 0.9V ~ 1.75V (XC6205) ◆Low ESR Capacitor Compatible ■APPLICATIONS ●Mobile phones ●Cordless phones ●Cameras, video recorders ●Portable games ●Portable AV equipment ●Reference voltage ●Battery powered equipment ■GENERAL DESCRIPTION The XC6204/6205 series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a standard voltage source, an error correction, current limiter and a phase compensation circuit plus a driver transistor. Output voltage is selectable in 50mV steps within a range of 0.9V ~ 6.0V. The series is also compatible with low ESR ceramic capacitors which give added output stability. This stability can be maintained even during load fluctuations due to the excellent transient response of the series. The current limiter's foldback circuit also operates as a short protect for the output current limiter and the output pin. The CE function enables the output to be turned off, resulting in greatly reduced power consumption. ■FEATURES Maximum Output Current: : 150mA (300mA=XC6204 E to H TYP.) Dropout Voltage : 200mV(IOUT = 100mA) Operating Voltage : 2V ~ 10V Output Voltage Range : 1.8V ~ 6.0V (XC6204) (50mV steps) 0.9V ~ 1.75V (XC6205) (50mV steps) Highly Accurate : ±2% Low Power Consumption : 70μA (TYP.) Standby Current : Less than 0.1μA (TYP.) High Ripple Rejection : 70dB (10kHz) (XC6204) 60dB (10kHz) (XC6205) Operational Temperature Range : -40℃ ~ 85℃ Low ESR Capacitor Compatible : Ceramic capacitor ■TYPICAL APPLICATION CIRCUIT ■TYPICAL PERFORMANCE CHARACTERISTICS XC6204_6205 ETR0304_002.doc 1 XC6204/6205 Series ■PIN CONFIGURATION CE 6 VSS 5 NC 4 1 VIN 2 NC 3 VOUT SOT-25 (TOP VIEW) SOT-89-5 (TOP VIEW) USP-6B (BOTTOM VIEW) *The dissipation pad for the USP-6B package should be solder-plated in recommended mount pattern and metal masking so as to enhance mounting strength and heal release. If the pad needs to be connected to other pins, it should be connected to the VSS pin. ■PIN ASSIGNMENT SOT-25 1 2 3 4 5 PIN NUMBER SOT-89-5 USP-6B 4 2 3 1 5 1 5 6 2, 4 3 PIN NAME VIN VSS CE NC VOUT FUNCTION Input Ground ON/OFF Control No Connection Output ■FUNCTIONS ●XC6204/6205 A, B, E, F Series CE OPERATIONAL STATE H ON L OFF ●XC6204/6205 C, D, G, H Series CE OPERATIONAL STATE H OFF L ON H= High Level L= Low Level 2 XC6204/6205 Series ■PRODUCT CLASSIFICATION ●Selection Guide The following options for the CE pin logic and internal pull-up/down are available: High Active + no pull-down resistor built-in (standard) High Active + 300kΩ pull-down resistor built-in (semi-custom) Low Active + no pull-up resistor built-in (semi-custom) Low Active + 300kΩ pull-up resistor built-in (semi-custom) Note: With the pull-up resistor or pull-down resistor built-in types, the supply current during operation will increase by VIN / 300kΩ (TYP.) ●Ordering Information XC6204/6205①②③④⑤⑥ DESIGNATOR ① (*1) ②③ DESCRIPTION Type of Regulator (CE pin Logic) Output Voltage SYMBOL A/E B/F C/G D/H 09 ~ 60, 2 Output Voltage Accuracy 1 (*2) A B (*2) ⑤ ⑥ NOTE : *1: E to H types are compatible to 300mA of XC6204 series. *2: Output voltage range of the ±1％ accuracy product is 3.0V to 6.0V. DESCRIPTION : High Active, pull-down resistor built-in : High Active, no pull-down resistor built-in : Low Active, pull-up resistor built-in : Low Active, no pull-up resistor built-in : e.g. VOUT=2.0V②→=2, ③=0 : 100mV increments, ±2% accuracy e.g. VOUT=3.8V, ±2%→②=3, ③=8, ④=2 : 100mV increments, ±1% accuracy e.g. VOUT=3.0V, ±1%→②=3, ③=0, ④=1 : 50mV increments, ±2% accuracy e.g. VOUT=3.85V, ±2%→②=3, ③=8, ④=A : 50mV increments, ±1% accuracy e.g. VOUT=3.05V, ±1%→②=3, ③=0, ④=B : SOT-25 (SOT-23-5) : USP-6B : SOT-89-5 : Embossed tape, standard feed : Embossed tape, reverse feed ④ Package Device Orientation M D P R L 3 XC6204/6205 Series ■PACKAGING INFORMATION ●SOT-25 2.9+0.2 +0.1 5-0.4 -0.05 ●SOT-89-5 1.6 +0.2 -0.1 2.8+0.2 0~0.1 0.95 0.95 0.15 +0.1 -0.05 1.9+0.2 ●USP-6B 4 1.1+0.1 1.0~1.3 MIN 0.2 XC6204/6205 Series ■MARKING RULE [XC6204] ●SOT-25, SOT-89-5 5 2 4 5 ① ② 4 ② ① ③ ③④ 1 2 SOT-25 3 1 2 SOT-89-5 (TOP VIEW) ④ 3 (TOP VIEW) ①Represents product series MARK 4 ②Represents type of regulator MARK PRODUCT SERIES OUTPUT VOLTAGE 100mV INCREMENTS OUTPUT VOLTAGE 50mV INCREMENTS VOLTAGE =0.1~3.0V VOLTAGE =3.1~6.0V VOLTAGE =0.15～3.05V VOLTAGE =3.15～6.05V V X Y Z A B C D E F H K L M N P XC6204Axxxxx XC6204Bxxxxx XC6204Cxxxxx XC6204Dxxxxx PRODUCT SERIES XC6204xxxxxx ③Represents output voltage MARK 0 1 2 3 4 5 6 7 8 9 A B C D E － － － － － － － － － － － － － － － OUTPUT VOLTAGE (V) 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 － － － － － － － － － － － － － － － 3.15 3.25 3.35 3.45 3.55 3.65 3.75 3.85 3.95 4.05 4.15 4.25 4.35 4.45 4.55 MARK F H K L M N P R S T U V X Y Z 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 OUTPUT VOLTAGE (V) 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 1.65 1.75 1.85 1.95 2.05 2.15 2.25 2.35 2.45 2.55 2.65 2.75 2.85 2.95 3.05 4.65 4.75 4.85 4.95 5.05 5.15 5.25 5.35 5.45 5.55 5.65 5.75 5.85 5.95 6.05 ④Represents production lot number 0～9, A to Z repeated. (G, I, J, O, Q, W excepted) 5 XC6204/6205 Series ■MARKING RULE (Continued) [XC6204] ●USP-6B 1 2 3 USP-6B (TOP VIEW) 6 5 4 ①②Represents product series MARK ① 0 ② 4 PRODUCT SERIES XC6204xxxxDx ③Represents type of regulator MARK A B C D TYPE CE pin, High Active, Pull-Down Resistor Built-In CE pin, High Active, No Pull-Down Resistor Built-In CE pin, High Active, Pull-Up Resistor Built-In CE pin, Low Active, No Pull-Up Resistor Built-In PRODUCT SERIES XC6204AxxxDx XC6204BxxxDx XC6204CxxxDx XC6204DxxxDx ④Represents integer of the output voltage MARK 3 5 VOLTAGE（V） 3.X 5.X PRODUCT SERIES XC6204x3xxDx XC6204x5xxDx ⑤Represents decimal number of output voltage MARK 0 1 2 3 4 5 6 7 8 9 VOLTAGE (V) X.0 X.1 X.2 X.3 X.4 X.5 X.6 X.7 X.8 X.9 PRODUCT SERIES XC6204xx0xDx XC6204xx1xDx XC6204xx2xDx XC6204xx3xDx XC6204xx4xDx XC6204xx5xDx XC6204xx6xDx XC6204xx7xDx XC6204xx8xDx XC6204xx9xDx MARK A B C D E F H K L M VOLTAGE (V) X.05 X.15 X.25 X.35 X.45 X.55 X.65 X.75 X.85 X.95 PRODUCT SERIES XC6204xx0ADx XC6204xx1ADx XC6204xx2ADx XC6204xx3ADx XC6204xx4ADx XC6204xx5ADx XC6204xx6ADx XC6204xx7ADx XC6204xx8ADx XC6204xx9ADx ⑥Represents production lot number 0 to 9, A to Z repeated. (G, I, J, O, Q, W excepted) Note: No character inversion used. ④⑤⑥ ①②③ 6 XC6204/6205 Series ■MARKING RULE (Continued) [XC6205] ●SOT-25, SOT-89-5 5 5 ① ② 2 4 4 ② ① ③ ③④ 1 2 SOT-25 3 1 2 SOT-89-5 (TOP VIEW) ④ 3 (TOP VIEW) ①Represents product series MARK 5 PRODUCT SERIES XC6205xxxxxx ②Represents type of regulator MARK OUTPUT VOLTAGE OUTPUT VOLTAGE 100mV INCREMENTS 50mV INCREMENTS V X Y Z ③Represents output voltage MARK 8 9 A B C OUTPUT VOLTAGE (V) 0.9 1.0 1.1 1.2 1.3 0.95 1.05 1.15 1.25 1.35 MARK D E F H OUTPUT VOLTAGE (V) 1.4 1.5 1.6 1.7 1.45 1.55 1.65 1.75 E F H K PRODUCT SERIES XC6205Axxxxx XC6205Bxxxxx XC6205Cxxxxx XC6205Dxxxxx ④Represents production lot number 0 to 9, A to Z, reversed character of 0 to 9 and A to Z repeated. (G, I, J, O, Q, W excepted) 7 XC6204/6205 Series ■MARKING RULE(Continued) [XC6205] ●USP-6B 1 2 3 6 5 4 USP-6B (TOP VIEW) ①②Represents product series MARK ① ② 0 5 PRODUCT SERIES XC6205xxxxDx ③Represents type of voltage regulator MARK A B C D CE pin: CE pin: CE pin: CE pin: TYPE High Active with Pull-Down Resistor Built-In High Active with No Pull-Down Resistor Built-In Low Active with Pull-Up Resistor Built-In Low Active with No Pull-Up Resistor Built-In PRODUCT SERIES XC6205AxxxDx XC6205BxxxDx XC6205CxxxDx XC6205DxxxDx ④Represents integer of output voltage MARK 3 5 VOLTAGE (V) 3.X 5.X PRODUCT SERIES XC6205x3xxDx XC6205x5xxDx ⑤Represents decimal point of output voltage MARK 0 1 2 3 4 5 6 7 8 9 OUTPUT VOLTAGE (V) X.0 X.1 X.2 X.3 X.4 X.5 X.6 X.7 X.8 X.9 XC6205xx0xDx XC6205xx1xDx XC6205xx2xDx XC6205xx3xDx XC6205xx4xDx XC6205xx5xDx XC6205xx6xDx XC6205xx7xDx XC6205xx8xDx XC6205xx8xDx MARK A B C D E F H K L M OUTPUT VOLTAGE (V) X.05 X.15 X.25 X.35 X.45 X.55 X.65 X.75 X.85 X.95 XC6205xx0ADx XC6205xx1ADx XC6205xx2ADx XC6205xx3ADx XC6205xx4ADx XC6205xx5ADx XC6205xx6ADx XC6205xx7ADx XC6205xx8ADx XC6205xx9ADx ⑥Represents production lot number 0 to 9, A to Z repeated (G, I, J, O, Q, W excepted) *No character inversion used. ④⑤⑥ ①②③ 8 XC6204/6205 Series ■BLOCK DIAGRAM Diodes shown in the above circuit are protective diodes. ■ABSOLUTE MAXIMUM RATINGS PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage SOT-25 Power Dissipation USP-6B SOT-89-5 Operational Temperature Range Storage Temperature Range SYMBOL VIN IOUT VOUT VCE Pd Topr Tstg RATINGS 12.0 500 VSS-0.3～VIN+0.3 VSS-0.3～VIN+0.3 250 100 500 -40 ~ +85 -55 ~ +125 Ta=25℃ UNITS V mA V V mW ℃ ℃ 9 XC6204/6205 Series ■ELECTRICAL CHARACTERISTICS XC6204A, B series PARAMETER Output Voltage (2% products) (*3) Output Voltage (1% products) (*3) Maximum Output Current Load Regulation Dropout Voltage (*4) Supply Current (A series) Supply Current (B series) Standby Current Line Regulation Input Voltage Output Voltage Temperature Characteristics Output Noise Ripple Rejection Rate Current Limiter Short-circuit Current CE “High” Voltage CE “Low” Voltage CE “High” Current (A series) CE “High” Current (B series) CE “Low” Current NOTE: *1 : Unless otherwise stated, VIN=VOUT(T)+1.0V *2 : VOUT(T)=Specified output voltage *3 : VOUT(E)=Effective output voltage (i.e. the output voltage when “VOUT (T)+1.0V” is provided at the VIN pin while maintaining a certain IOUT value). *4 : Vdif={VIN1 (*6) SYMBOL CONDITIONS MIN. ×0.98 Ta = 25℃ TYP. MAX. -40℃