XC6205B572PL

XC6204/XC6205 Series High Speed LDO Regulators Output ON-OFF Control ETR0304_004 ■GENERAL DESCRIPTION The XC6204/6205 series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a standard voltage source, an error correction, current limiter and a phase compensation circuit plus a driver transistor. Output voltage is selectable in 0.05V steps within a range of 0.9V ~ 6.0V. The series is also compatible with low ESR ceramic capacitors which give added output stability. This stability can be maintained even during load fluctuations due to the excellent transient response of the series. The current limiter's foldback circuit also operates as a short protect for the output current limiter and the output pin. The CE function enables the output to be turned off, resulting in greatly reduced power consumption. ■APPLICATIONS ●Mobile phones ●Cordless phones ●Cameras, video recorders ●Portable games ●Portable AV equipment ●Reference voltage ●Battery powered equipment ■FEATURES Maximum Output Current : 150mA (300mA=XC6204 E to H TYP.) Dropout Voltage : 200mV @ 100mA 60mV @ 30mA Operating Voltage : 2V ~ 10V Output Voltage Range : 1.8V ~ 6.0V (XC6204) (0.05V increments) 0.9V ~ 1.75V (XC6205) (0.05V increments) Highly Accurate : ±2% Low Power Consumption : 70μA (TYP.) Standby Current : Less than 0.1μA (TYP.) High Ripple Rejection : 70dB (10kHz) (XC6204) 60dB (10kHz) (XC6205) Operational Temperature Range : -40℃ ~ 85℃ Low ESR Capacitor Compatible : Ceramic capacitor ■TYPICAL APPLICATION CIRCUIT ■TYPICAL PERFORMANCE CHARACTERISTICS 1/49 XC6204/XC6205 Series ■PIN CONFIGURATION CE 6 VSS 5 NC 4 1 VIN 2 NC 3 VOUT SOT-25 (TOP VIEW) SOT-89-5 (TOP VIEW) USP-6B (BOTTOM VIEW) *The dissipation pad for the USP-6B package should be solder-plated in recommended mount pattern and metal masking so as to enhance mounting strength and heal release. If the pad needs to be connected to other pins, it should be connected to the VSS (No.5) pin. ■PIN ASSIGNMENT SOT-25 1 2 3 4 5 PIN NUMBER SOT-89-5 USP-6B 4 2 3 1 5 1 5 6 2, 4 3 PIN NAME VIN VSS CE NC VOUT FUNCTION Input Ground ON/OFF Control No Connection Output ■FUNCTIONS ●XC6204/6205 A, B, E, F Series CE OPERATIONAL STATE H ON L OFF ●XC6204/6205 C, D, G, H Series CE OPERATIONAL STATE H OFF L ON H= High Level L= Low Level 2/49 XC6204/XC6205 Series ■PRODUCT CLASSIFICATION ●Selection Guide The following options for the CE pin logic and internal pull-up/down are available: High Active + no pull-down resistor built-in (standard) High Active + 300kΩ pull-down resistor built-in (semi-custom) Low Active + no pull-up resistor built-in (semi-custom) Low Active + 300kΩ pull-up resistor built-in (semi-custom) Note: With the pull-up resistor or pull-down resistor built-in types, the supply current during operation will increase by VIN / 300kΩ (TYP.) ●Ordering Information XC6204/6205①②③④⑤⑥ DESIGNATOR ① (*1) ②③ DESCRIPTION Type of Regulator (CE pin Logic) Output Voltage SYMBOL A/E B/F C/G D/H 09 ~ 60, 2 1 (*2) A B (*2) M D P R L DESCRIPTION : High Active, pull-down resistor built-in : High Active, no pull-down resistor built-in : Low Active, pull-up resistor built-in : Low Active, no pull-up resistor built-in : e.g. VOUT=2.0V②→=2, ③=0 : 100mV increments, ±2% accuracy e.g. VOUT=3.8V, ±2%→②=3, ③=8, ④=2 : 100mV increments, ±1% accuracy e.g. VOUT=3.0V, ±1%→②=3, ③=0, ④=1 : 0.05V increments, ±2% accuracy e.g. VOUT=3.85V, ±2%→②=3, ③=8, ④=A : 0.05V increments, ±1% accuracy e.g. VOUT=3.05V, ±1%→②=3, ③=0, ④=B : SOT-25 (SOT-23-5) : USP-6B : SOT-89-5 : Embossed tape, standard feed : Embossed tape, reverse feed ④ Output Voltage Accuracy ⑤ ⑥ NOTE : Package Device Orientation *1: E to H types are compatible to 300mA of XC6204 series. *2: Output voltage range of the ±1％ accuracy product is 3.0V to 6.0V. 3/49 XC6204/XC6205 Series ■BLOCK DIAGRAM Diodes shown in the above circuit are protective diodes. ■ABSOLUTE MAXIMUM RATINGS PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage SOT-25 Power Dissipation USP-6B SOT-89-5 Operational Temperature Range Storage Temperature Range SYMBOL VIN IOUT VOUT VCE Pd Topr Tstg RATINGS 12.0 500 VSS-0.3∼VIN+0.3 VSS-0.3∼VIN+0.3 250 100 500 -40 ~ +85 -55 ~ +125 Ta=25℃ UNITS V mA V V mW ℃ ℃ 4/49 XC6204/XC6205 Series ■ELECTRICAL CHARACTERISTICS XC6204A, B series PARAMETER Output Voltage (2% products) (*3) Output Voltage (1% products) (*3) Maximum Output Current Load Regulation Dropout Voltage (*4) Supply Current (A series) Supply Current (B series) Standby Current Line Regulation Input Voltage Output Voltage Temperature Characteristics Output Noise Ripple Rejection Rate Current Limiter Short-circuit Current CE “High” Voltage CE “Low” Voltage CE “High” Current (A series) CE “High” Current (B series) CE “Low” Current NOTE: *1 : Unless otherwise stated, VIN=VOUT(T)+1.0V *2 : VOUT(T)=Specified output voltage *3 : VOUT(E)=Effective output voltage (i.e. the output voltage when “VOUT (T)+1.0V” is provided at the VIN pin while maintaining a certain IOUT value). *4 : Vdif={VIN1 (*6) SYMBOL CONDITIONS MIN. ×0.98 Ta = 25℃ TYP. MAX. -40℃