XC6205F092MR-G

XC6204/XC6205 Series ETR03004-011a 300mA/150mA High Speed LDO Regulators with ON-OFF Control ■GENERAL DESCRIPTION The XC6204/XC6205 series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a standard voltage source, an error correction, current limiter and a phase compensation circuit plus a driver transistor. Output voltage is selectable in 0.05V steps within a range of 0.9V ~ 6.0V. The series is also compatible with low ESR ceramic capacitors which give added output stability. This stability can be maintained even during load fluctuations due to the excellent transient response of the series. The current limiter's foldback circuit also operates as a short protect for the output current limiter and the output pin. The CE function enables the output to be turned off, resulting in greatly reduced power consumption. ■APPLICATIONS ■FEATURES ●Smart phones / Mobile phones ●Portable game consoles ●Digital still cameras / Camcorders ●Digital audio equipments ●Reference voltage sources ●Multi-function power supplies Maximum Output Current : 150mA 300mA(XC6204 E to H type) Dropout Voltage : 200mV @ 100mA 60mV @ 30mA Operating Voltage : 2V ~ 10V Output Voltage Range : 1.8V ~ 6.0V (XC6204) 0.9V ~ 1.75V (XC6205) Highly Accurate : ±2%, ±1% Low Power Consumption : 70μA (TYP.) Standby Current : 0.1μA (MAX.) High Ripple Rejection : 70dB@10kHz (XC6204) 60dB@10kHz (XC6205) Low ESR Capacitor Compatible : Ceramic capacitor Operating Ambient Temperature : -40℃~ 85℃ Packages : SOT-25, SOT-89-5, USP-6B Environmentally Friendly : EU RoHS Compliant, Pb Free ■TYPICAL APPLICATION CIRCUIT ■TYPICAL PERFORMANCE CHARACTERISTICS 1/48 XC6204/XC6205 Series ■BLOCK DIAGRAM 1) XC6204, XC6205 Series B, D, F, H Type 2) XC6204, XC6205 Series C, G Type VIN VIN R Pull Up ON/OFF Control CE each　circuit CE + Error Amp Current Limit ON/OFF Control - V OUT + each　circuit Error Amp Current Limit VOUT R2 R2 R1 Voltage Reference R1 V SS Voltage Reference 3) XC6204, XC6205 Series A, E Type VIN ON/OFF Control CE each　circuit R Pull Down + Error Amp Current Limit VOUT R2 R1 Voltage Reference * Diodes shown in the above circuit are protective diodes. 2/48 VSS V SS XC6204/XC6205 Series ■PRODUCT CLASSIFICATION ●Ordering Information XC6204/XC6205①②③④⑤⑥-⑦ DESIGNATOR ITEM ①(*1) Type of Regulator (CE pin Logic) ②③ Output Voltage SYMBOL A B C D E F G H 09 ~ 17 18 ~ 60 2(*4) 1(*3) ④ Output Voltage Accuracy A(*4) B(*3) MR-G DR-G PR-G (*1) (*2) (*3) (*4) (*5) DESCRIPTION 150mA Active High, pull-down resistor built-in (*2)(Semi-Custom) 150mA Active High, no pull-down resistor built-in (Standard) 150mA Active Low, pull-up resistor built-in (*2)(Semi-Custom) 150mA Active Low, no pull-up resistor built-in (Semi-Custom) 300mA(*1) Active High, pull-down resistor built-in (*2) (Semi-Custom) 300mA(*1) Active High, no pull-down resistor built-in (Standard) 300mA(*1) Active Low, pull-up resistor built-in (*2) (Semi-Custom) 300mA(*1) Active Low, no pull-up resistor built-in (Semi-Custom) XC6205 XC6204 e.g. VOUT=2.0V→②=2, ③=0 0.1V increments, ±2% accuracy e.g. VOUT=2.8V, ±2%→②=3, ③=8, ④=2 0.1V increments, ±1% accuracy e.g. VOUT=3.0V, ±1%→②=3, ③=0, ④=1 0.05V increments, ±2% accuracy e.g. VOUT=2.85V, ±2%→②=2, ③=8, ④=A 0.05V increments, ±1% accuracy e.g. VOUT=3.85V, ±1%→②=3, ③=8, ④=B SOT-25 (3,000pcs/Reel) USP-6B (3,000pcs/Reel) SOT-89-5 (1,000pcs/Reel) E to H types are compatible to 300mA of XC6204 series. (XC6205 can not draw 300mA depending on output voltage.) With the pull-up resistor or pull-down resistor built-in types, the supply current during operation will increase by VIN / 300kΩ (TYP.) Output voltage range of the ±1% accuracy product is 2.95V to 6.0V. Output voltage accuracy of the VOUT≦1.5V is ±30mV. The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant. 3/48 XC6204/XC6205 Series ■PIN CONFIGURATION CE 6 1 VIN VSS 5 2 NC 3 VOUT NC 4 SOT-25 (TOP VIEW) USP-6B (BOTTOM VIEW) SOT-89-5 (TOP VIEW) ■PIN ASSIGNMENT PIN NUMBER PIN NAME FUNCTIONS 1 VIN Input 5 VSS Ground SOT-25 SOT-89-5 USP-6B 1 4 2 2 3 3 6 CE ON/OFF Control 4 1 2, 4 NC No Connection 5 5 3 VOUT Output ■FUNCTIONS Type A,B,E,F Type C,D,G,H Type CE OPERATIONAL STATE H L H L ON OFF OFF ON H = High Level L = Low Level ■ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNITS Input Voltage Output Current Output Voltage CE Input Voltage VIN IOUT VOUT VCE 12.0 500 (*1) VSS - 0.3 ~ VIN + 0.3 VSS - 0.3 ~ VIN + 0.3 V mA V V 250 SOT-25 600 (40mm x 40mm Standard board)(*2) 760 (JESD51-7board)(*2) Power Dissipation (Ta=25℃) USP-6B Pd 120 1000 (40mm x 40mm Standard board)(*2) mW 500 SOT-89-5 1300( 40mm x 40mm Standard board)(*2) 1750 (JESD51-7 board)(*2) Operating Ambient Temperature Storage Temperature Topr Tstg -40 ~ 85 -55 ~ 125 (*1 ) IOUT=Pd/(VIN-VOUT) (*2) The power dissipation figure shown is PCB mounted and is for reference only. Please refer to PACKAGING INFORMATION for the mounting condition. 4/48 ℃ ℃ XC6204/XC6205 Series ■ELECTRICAL CHARACTERISTICS XC6204A, B Type PARAMETER SYMBOL CONDITIONS Output Voltage Ta = 25℃ TYP. MAX. VOUT(E) Output Voltage IOUT = 30mA Maximum Output Current IOUTMAX Load Regulation VOUT Dropout Voltage - ×1.01 ×0.98 1mA≦IOUT≦100mA - - - 15 50 Vdif1 IOUT = 30mA E-1 Vdif2 IOUT = 100mA E-2 Supply Current VIN = VCE = VOUT(T)+1.0V (A type) 150 50 80 120 VIN = VCE = VOUT(T)+1.0V (B type) Standby Current ISTBY VIN = VOUT(T)+1.0V, VCE = VSS Input Voltage VOUT VOUT(T)+1.0V≦VIN≦10V VIN･VOUT IOUT = 30mA VIN - Output Voltage IOUT = 30mA VOUT Temperature Characteristics Topr･VOUT -40℃≦Topr≦85℃ Output Noise Power Supply Rejection Ratio en PSRR 150 - - mA 1 - 30 80 mV 1 mV 1 μA 2 50 90 145 70 100 40 80 120 - 0.01 0.10 - 0.05 1.00 μA 2 - 0.01 0.20 - 0.05 0.30 %/V 1 2 - 10 2 - 10 V 1 100 - - - - ppm/ ℃ 30 - - - - μVrms 3 - 70 - - - - dB 4 - 300Hz~50kHz IOUT = 50mA, f=10kHz 1 40 IOUT = 10mA VIN = {VOUT(T)+1.0}V+1.0Vp-pAC V ×1.02 IDD Supply Current UNITS CIRCUIT ×1.03 VOUT(T) VOUT(T) ×0.99 (1% products) -40℃