XC6206P122MR-G

XC6206 Series ETR0305_008 ■GENERAL DESCRIPTION The XC6206 series are highly precise, low power consumption, 3 terminal, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series provides large currents with a significantly small dropout voltage. The XC6206 consists of a current limiter circuit, a driver transistor, a precision reference voltage and an error correction circuit. The series is compatible with low ESR ceramic capacitors. The current limiter's foldback circuit operates as a short circuit protection as well as the output current limiter for the output pin. Output voltages are internally by laser trimming technologies. It is selectable in 0.1V increments within a range of 1.2V to 5.0V. SOT-23, SOT-89 and USP-6B packages are available. ■APPLICATIONS ■FEATURES ●Smart phones / Mobile phones Maximum Output Current : 200mA (3.0V type) ●Portable game consoles Dropout Voltage : 250mV @ 100mA (3.0V type) ●Digital still cameras / Camcorders ●Digital audio equipments Maximum Operating Voltage : 6.0V Output Voltage Range : 1.2V ~ 5.0V (0.1V increments) Highly Accurate :±2%@VOUT≧1.5V ●Reference voltage sources +30mV@VOUT2.0V) Low Power Consumption : 1.0μA (TYP.) Low ESR Capacitor : Ceramic capacitor compatible Protection : Current Limit Circuit Built-in Operating Ambient Temperature : -40℃~ +85℃ Packages : SOT-23 SOT-89 USP-6B Environmentally Friendly ■TYPICAL APPLICATION CIRCUIT : EU RoHS Compliant, Pb Free ■TYPICAL PERFORMANCE CHARACTERISTICS 1/15 XC6206 Series ■BLOCK DIAGRAM *Diodes inside the circuit are an ESD protection diode and a parasitic diode. ■PRODUCT CLASSIFICATION ●Ordering Information XC6206P①②③④⑤-⑥(*1) (*1) DESIGNATOR ITEM SYMBOL DESCRIPTION ①② Output Voltage 12~50 e.g. VOUT: 3.0V→①=3, ②=0 ③ Accuracy ④⑤-⑥ Packages (Order Unit) 2 1 MR MR-G PR PR-G DR DR-G +2% (VOUT≧1.5V), +30mV (VOUT1.8V, IOUT=100mA - E-2(*5) - E-3(*5) VOUT(T)VOUT(T)) (High Accuracy):±1% (2.0V≦VOUT(T)) *3: VOUT(E) :Effective output voltage. *4: VOUT(T) :Nominal voltage *5: For E-1,E-2,E-3,E-4,E-5, Please refer to Electrical Characteristics Chart. *6: Vdif =VIN1 -VOUT1 VOUT1 :A voltage equal to 98% of the output voltage whenever an amply stabilized {VOUT(T) + 1.0V} is input with each IOUT. VIN1 :The input voltage when VOUT1 appears as input voltage is gradually decreased. *7: The low ESR capacitors use that is more than 1.0μF as CL is possible. 4/15 XC6206 Series ■ELECTRICAL CHARACTERISTICS (Continued) ●Electrical Characteristics Chart E-1 E-2 E-3 NOMINAL VOLTAGE LOAD REGULATION DROPOUT VOLTAGE1 DROPOUT VOLTAGE2 VOUT(T) ⊿VOUT (mV) MAX. Vdif1 (mV) TYP. MAX. Vdif2 (mV) TYP. MAX. 1.2 460 760 400 650 1.4 350 590 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 300 250 200 150 510 450 410 390 1.3 40 45 700 E-4 MAX. OUTPUT CURRENT IOUTMAX (mA) MIN. 960 60 580 860 450 810 E-5 SHORT CURRENT ISHORT (mA) TYP. 180 155 80 780 130 50 120 100 370 350 710 55 150 60 75 350 250 680 200 100 65 70 60 320 200 630 50 290 175 600 250 75 80 5/15 XC6206 Series ■TEST CIRCUITS Circuit ① VIN VOUT OPEN A VSS Circuit ② VIN V 1μF (ceramic) VOUT VSS A 1μF (ceramic) V ■NOTES ON USE 1. For temporary, transitional voltage drop or voltage rising phenomenon, the IC is liable to malfunction should the ratings be exceeded. 2. Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output current. Please strengthen VIN and VSS wiring in particular 3. Please wire the input capacitor (CIN) and the output capacitor (CL) as close to the IC as possible. 4. Capacitances of these capacitors (CIN, CL) are decreased by the influences of bias voltage and ambient temperature. Care shall be taken for capacitor selection to ensure stability of phase compensation from the point of ESR influence. 5. When it is used in a quite small input / output dropout voltage, output may go into unstable operation. Please test it thoroughly before using it in production. 6. Torex places an importance on improving our products and their reliability. We request that users incorporate fail-safe designs and post-aging protection treatment when using Torex products in their systems. 6/15 XC6206 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (1) Output Voltage vs. Output Current (2) Current Limit Topr=25℃ Topr=25℃ Topr=25℃ 7/15 XC6206 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (3) Output Voltage vs. Input Voltage (4) Dropout Voltage vs. Output Current 8/15 XC6206 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (5) Supply Current vs. Input Voltage (6) Output Voltage vs. Ambient Temperature 9/15 XC6206 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (7) Output Voltage vs. Ambient Temperature (8) Input Transient Response 1 Time (0.4ms / div) Time (0.4ms / div) 10/15 Time (0.4ms / div) Time (0.4ms / div) Time (0.4ms / div) Time (0.4ms / div) XC6206 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (9) Input Transient Response 2 Time (2ms / div) Time (2ms / div) Time (2ms / div) Time (2ms / div) Time (2ms / div) Time (2ms / div) Time (1ms / div) Time (1ms / div) (10) Load Transient Response Time (1ms / div) 11/15 XC6206 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (11) Ripple Rejection Rate 12/15 XC6206 Series ■PACKAGING INFORMATION For the latest package information go to, www.torexsemi.com/technical-support/packages PACKAGE OUTLIN / LAND PATTERN THERMAL CHARACTERISTICS SOT-23 SOT-23 PKG Standard Board SOT-23 Power Dissipation SOT-89 SOT-89 PKG Standard Board SOT-89 Power Dissipation USP-6B USP-6B PKG Standard Board USP-6B Power Dissipation 13/15 XC6206 Series ■MARKING RULE ●SOT-23, SOT-89 3 ① ② ① represents product number ③ ④ PRODUCT SERIES 6 XC6206P***** ② represents 3 pins regulator 2 1 MARK MARK VOLTAGE＝0.1 ~ 3.0V VOLTAGE＝3.1 ~ 6.0V SOT-23 (TOP VIEW) 5 ④ ③ ② ① 1 2 SOT-89 (TOP VIEW) 6 XC6206P***** ③ represents output voltage MARK VOLTAGE (V) 3 0 1 2 3 4 5 6 7 8 9 A B C D E PRODUCT SERIES - 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 1.2 1.3 1.4 1.5 MARK - OUTPUT VOLTAGE (V) F H K L M N P R S T U V X Y Z 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 4.6 4.7 4.8 4.9 5.0 - ④ represents production lot number 0 to 9, A to Z repeated. (G, I, J, O, Q, W excluded) ①② represents product number MARK ① ●USP-6B 0 6 ③ represents 3 pins regulator MARK USP-6B (TOP VIEW) PRODUCT SERIES ② XC6206P***D* PRODUCT SERIES P XC6206P***D* ④⑤ represents output voltage MARK OUTPUT VOLTAGE(V) ④ ⑤ 3 5 3 0 3.3 5.0 ⑥ represents production lot number 0 to 9, A to Z repeated. (G, I, J, O, Q, W excluded) 14/15 PRODUCT SERIES XC6206P33*D* XC6206P50*D* - XC6206 Series 1. The product and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this datasheet is up to date. 2. The information in this datasheet is intended to illustrate the operation and characteristics of our products. We neither make warranties or representations with respect to the accuracy or completeness of the information contained in this datasheet nor grant any license to any intellectual property rights of ours or any third party concerning with the information in this datasheet. 3. Applicable export control laws and regulations should be complied and the procedures required by such laws and regulations should also be followed, when the product or any information contained in this datasheet is exported. 4. The product is neither intended nor warranted for use in equipment of systems which require extremely high levels of quality and/or reliability and/or a malfunction or failure which may cause loss of human life, bodily injury, serious property damage including but not limited to devices or equipment used in 1) nuclear facilities, 2) aerospace industry, 3) medical facilities, 4) automobile industry and other transportation industry and 5) safety devices and safety equipment to control combustions and explosions. Do not use the product for the above use unless agreed by us in writing in advance. 5. Although we make continuous efforts to improve the quality and reliability of our products; nevertheless Semiconductors are likely to fail with a certain probability. So in order to prevent personal injury and/or property damage resulting from such failure, customers are required to incorporate adequate safety measures in their designs, such as system fail safes, redundancy and fire prevention features. 6. Our products are not designed to be Radiation-resistant. 7. Please use the product listed in this datasheet within the specified ranges. 8. We assume no responsibility for damage or loss due to abnormal use. 9. All rights reserved. No part of this datasheet may be copied or reproduced unless agreed by Torex Semiconductor Ltd in writing in advance. TOREX SEMICONDUCTOR LTD. 15/15