XC62RPP1502LR

XC62RP Series Positive Voltage Regulators for Voltage Reference Source ETR0314_001 ■GENERAL DESCRIPTION The XC62RP series are highly precise, low power consumption, positive voltage regulators, for voltage reference source, manufactured using CMOS and laser trimming technologies. SOT-23 (150mW), SOT-89 (500mW) and TO-92 (300mW) packages are available. ■APPLICATIONS ●Battery powered equipment ●Reference voltage sources ●Cameras and video recorders ●Palmtops ■FEATURES Maximum Output Current : 6.0mA (within max. power dissipation, VOUT=2.0V) Output Voltage Range Highly Accurate : 1.5V ~ 3.5V in 100mV increments : Setting Voltage accuracy±2% (±1%for semi-custom products) Low Power Consumption : 3.2μA (VOUT=2.0) (TYP.) Output Voltage Temperature Characteristics : ±100ppm/℃(TYP.) Line Regulation Dropout Voltage Ultra Small Packages : 0.2%/V (TYP.) : 140mV @ 300μA : SOT-23 (150mW) mini-mold SOT-89 (500mW) mini-power mold TO-92 (300mW) CMOS Low Power Consumption ■TYPICAL APPLICATION CIRCUIT ■TYPICAL PERFORMANCE CHARACTERISTICS Please use with a load capacitance (CL) of less than 0.1μF. Ambient Temperature: Topr (℃) 1/14 XC62RP Series ■PIN CONFIGURATION SOT-23 (TOP VIEW) ■PIN ASSIGNMENT PIN NUMBER SOT-23 1 3 2 SOT-89 1 2 3 TO-92 (T) 1 2 3 TO-92 (L) 2 1 3 PIN NAME VSS VIN VOUT FUNCTION Ground Supply Voltage Input Output ■PRODUCT CLASSIFICATION ●Ordering Information XC62R ①②③④⑤⑥⑦ DESIGNATOR ① ② ④ ⑤ ③ DESCRIPTION Polarity of Output Voltage Output Voltage Temperature Coefficients Output Voltage Accuracy SYMBOL P 15 ~ 35 0 1 2 M P T L R L H B : Positive : e.g. VOUT1.5V→②=1, ③=5 VOUT3.0V→②=3, ③=0 :±100ppm (TYP.) :±1% (Semi-custom) :±2% : SOT-23 : SOT-89 : TO-92 (standard) : TO-92 (Custom pin configuration) : Embossed tape, standard feed : Embossed tape, reverse feed : Paper tape (TO-92) : Bag (TO-92) DESCRIPTION ⑥ Package ⑦ Device Orientation 2/14 XC62RP Series ■BLOCK DIAGRAM ■ABSOLUTE MAXIMUM RATINGS Ta=25OC PARAMETER Input Voltage Output Current Output Voltage SOT-23 Power Dissipation SOT-89 TO-92 Operating Temperature Range Storage Temperature Range Topr Tstg Pd SYMBOL VIN IOUT VOUT RATINGS 12.0 50* VSS-0.3~VIN+0.3 150 500 300 -30 ~ +80 -40 ~ +125 ℃ ℃ mW UNITS V mA V Note: Please ensure that IOUT is less than Pd / (VIN-VOUT). 3/14 XC62RP Series ■ELECTRICAL CHARACTERISTICS XC62RP1602 VOUT(T)=1.6V (*1) SYMBOL VOUT(E) (*2) IOUT max △VOUT Vdif1 Vdif2 ISS △VOUT △VIN ・VOUT VIN △VOUT △Topr・VOUT IOUT=100μA -30℃≦Topr≦80℃ CONDITIONS IOUT=100μA VIN=2.6V VIN=2.6V, VOUT(E)≧VOUT(T) x 0.95 VIN=2.6 V 100μA≦IOUT≦ 300μA IOUT=100μA IOUT=300μA VIN=2.6V IOUT=100μA 2.6V≦VIN≦6.0V MIN. 1.568 4.0 TYP. 1.600 20 30 50 3.0 0.2 ±100 MAX. 1.632 40 80 140 5.8 0.3 6.0 Ta=25℃ UNITS CIRCUIT V mA mV mV mV μA %/V V ppm/℃ 1 1 1 1 1 2 1 1 PARAMETER Output Voltage Maximum Output Current Load Regulation Dropout Voltage (*3) Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics XC62RP2002 VOUT(T)=2.0V (*1) SYMBOL VOUT(E) (*2) IOUT max △VOUT Vdif1 Vdif2 CONDITIONS IOUT=100μA VIN=3.0V VIN=3.0V, VOUT(E)≧VOUT(T) x 0.95 VIN=3.0 V 100μA≦IOUT≦300μA IOUT=100μA IOUT=300μA VIN=3.0V IOUT=100μA 3.0V≦VIN≦6.0V IOUT=100μA -30℃≦Topr≦80℃ MIN. 1.960 6.0 TYP. 2.000 20 30 50 3.2 0.2 ±100 MAX. 2.040 40 80 140 6.2 0.3 6.0 - Ta=25℃ UNITS CIRCUIT V mA mV mV mV μA %/V V ppm/℃ 1 1 1 1 1 2 1 1 PARAMETER Output Voltage Maximum Output Current Load Regulation Dropout Voltage (*3) Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics ISS △VOUT △VIN・VOUT VIN △VOUT △Topr・VOUT 4/14 XC62RP Series ■ELECTRICAL CHARACTERISTICS (Continued) XC62RP2502 VOUT(T)=2.5V (*1) SYMBOL VOUT(E) (*2) IOUT max △VOUT Vdif1 Vdif2 Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics ISS △VOUT △VIN・VOUT VIN △VOUT △Topr・VOUT CONDITIONS IOUT=100μA VIN=3.5V VIN=3.5V, VOUT(E)≧VOUT(T) x 0.95 VIN=3.5 V 100μA≦IOUT≦300μA IOUT=100μA IOUT=300μA VIN=3.5V IOUT=100μA 3.5V≦VIN≦6.0V IOUT=100μA -30℃≦Topr≦80℃ MIN. 2.450 8.0 TYP. 2.500 20 30 50 3.5 0.2 ±100 MAX. 2.550 40 80 140 6.8 0.3 6.0 Ta=25℃ UNITS CIRCUIT V mA mV mV mV μA %/V V ppm/℃ 1 1 1 1 1 2 1 1 PARAMETER Output Voltage Maximum Output Current Load Regulation Dropout Voltage (*3) XC62RP3002 VOUT(T)=3.0V (*1) SYMBOL VOUT(E) (*2) IOUT max △VOUT Vdif1 Vdif2 CONDITIONS IOUT=100μA VIN=4.0V VIN=4.0V, VOUT(E)≧VOUT(T) x 0.95 VIN=4.0 V 100μA≦IOUT≦300μA IOUT=100μA IOUT=300μA VIN=4.0V IOUT=100μA 4.0V≦VIN≦6.0V IOUT=100μA -30℃≦Topr≦ 80℃ MIN. 2.940 10.0 TYP. 3.000 20 30 50 3.8 0.2 ±100 MAX. 3.060 40 80 140 7.3 0.3 6.0 - Ta=25℃ UNITS CIRCUIT V mA mV mV mV μA %/V V ppm/℃ 1 1 1 1 1 2 1 1 PARAMETER Output Voltage Maximum Output Current Load Regulation Dropout Voltage (*3) Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics NOTE: ISS △VOUT △VIN・VOUT VIN △VOUT △Topr・VOUT *1: VOUT(T)=Specified output voltage . *2: VOUT(E)=Effective output voltage (i.e. the output voltage when "VOUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IOUT value). *3: Vdif= {VIN1 (*5)-VOUT1 (*4)} *4: VOUT1= A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT {VOUT(T)+1.0V} is input. *5: VIN1= The input voltage when VOUT1 appears as input voltage is gradually decreased. 5/14 XC62RP Series ■TYPICAL APPLICATION CIRCUIT ■NOTES ON USE 1. Please use with a load capacitance, CL, of less than 0.1μF and in 0.01μF steps. 2. Since short-circuit protection is not built-in, the IC may be damaged by rush current should the output pin be connected to the Ground pin. 3. When the load capacitance, CL, is small, overshoot will be produced when the power is switched on. 4. As the output pin's current is only a few μA, output voltage will increase should output be pulled-up by means of a resistor. ■TEST CIRCUITS Circuit 1 Circuit 2 6/14 XC62RP Series ■TYPICAL PERFORMANCE CHARACTERISTICS (1) Output Voltage vs. Output Current 7/14 XC62RP Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (2) Output Voltage vs. Input Voltage 8/14 XC62RP Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (3) Dropout Voltage vs. Output Current (4) Supply Current vs. Input Voltage 9/14 XC62RP Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (5) Output Voltage vs. Ambient Temperature . Ambient Temperature:Ta (℃) Ambient Temperature:Ta (℃) Ambient Temperature:Ta (℃) Ambient Temperature:Ta (℃) (6) Supply Current vs. Ambient Temperature Ambient Temperature:Ta (℃) Ambient Temperature:Ta (℃) Ambient Temperature:Ta (℃) Ambient Temperature:Ta (℃) 10/14 XC62RP Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (7) Input Transient Response (8) Input Transient Response 2 (9) Load Transient Response (10) Ripple Rejection Rate 11/14 XC62RP Series ■PACKAGING INFORMATION ●SOT-23 ●SOT-89 ●TO-92 12/14 XC62RP Series ■MARKING RULE ●SOT-23, SOT-89 ①Not used 3 ②Represents integer of output voltage ① ② ③④ MARK VOLTAGE (V) 1 2 SOT-23 (TOP VIEW) A B C D 0.x 1.x 2.x 3.x ③Represents decimal number of output voltage ② ④ MARK VOLTAGE (V) MARK VOLTAGE (V) 1 2 3 SOT-89 (TOP VIEW) A B C D E x.0 x.1 x.2 x.3 x.4 F H K L M x.5 x.6 x.7 x.8 x.9 ① ③ ④Represents production lot number 0 to 9, A to Z repeated (G, I, J, O, Q, W excepted) ●TO-92 ①Represents polarity of output voltage MARK P ②③Represents output voltage MARK ② ③ 3 5 3 0 POLARITY + (Positive) OUTPUT VOLTAGE (V) 3.3 5.0 ④Represents temperature characteristics MARK TEMPERATURE CHARACTERISTICS 0 ±100 ppm (TYP.) ⑤Represents output voltage accuracy MARK OUTPUT VOLTAGE ACCURACY 1 2 Within ±1% (semi-custom) Within ±2% ⑥Represents a least significant digit of production year MARK PRODUCTION YEAR 3 4 2003 2004 ⑦Represents production lot number 0 to 9, A to Z repeated (G, I, J, O, Q, W excepted) 13/14 XC62RP Series 1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this catalog is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this catalog. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this catalog. 4. The products in this catalog are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this catalog within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this catalog may be copied or reproduced without the prior permission of Torex Semiconductor Ltd. 14/14