XC6382C351PL

Series PFM Controlled, Step‐Up DC/DC Converters (Duty Ratio 75%) NDuty 75% NCMOS Low Power Consumption NOperating Voltage NOutput Voltage Range : 0.9V~10.0V : 2.0V~7.0V ■Applications GPalmtops GCellular phones, pagers GCameras, video recorders GPortable equipment NOutput Voltage Accuracy : ±2.5% 4 ■General Description The XC6382 series is a group of PFM controlled step-up DC/DC converters. The XC6382 series employs CMOS process and laser trimming technologies so as to attain low power and high accuracy. Max. oscillator frequency is trimmed to 100kHz (accuracy: ±15%) Every built-in switching transistor type enables a step-up circuit to be configured using only three external components ; a coil, a diode, and a capacitor. External transistor versions are available to accommodate high output current applications. Both built-in and external transistor types include 5-pin and 3-pin packages, which are provided with either a CE (chip enable) function that reduces power consumption during shut-down mode, or a V DD pin function (separating power and voltage detect pins). SOT-23, SOT-25 and SOT-89-5 super mini-mold packages. ■Features Operating (start-up) voltage range : 0.9V~10V Output voltage range : 2.0V~7.0V in 0.1V increments Highly accurate : Set-up voltage ±2.5% Maximum oscillator frequency : 100kHz (±15%) Duty ratio : 75%(±5%) Both switching transistor built-in and external types are available. Five-lead packaged units offer either Chip Enable or independent VOUT pin option. Small package : SOT-23, 25 mini-mold (3-pin, 5-pin) SOT-89, 89-5 mini-power mold (3-pin, 5-pin) ■Typical Application Circuit L 2 1 ■Typical Performance Characteristic XC6382A301 L=100μH,C=47μF（Tantalum） (TOP VIEW) SOT-23 VIN CIN 100 Efficiency:EFFI（％） 3 VOUT SD CL （Tantalum） 80 60 0.9V 1.2V 40 20 0 1.5V VIN=1.8V GND 0 20 40 60 80 100 Output Current:IOUT（mA） 487 XC6382 Series ■Pin Configuration 5 3 5 4 4 1 2 1 2 3 1 2 3 1 2 3 SOT-23 (TOP VIEW) SOT-25 (TOP VIEW) SOT-89 (TOP VIEW) SOT-89-5 (TOP VIEW) ■Pin Assignment 4 (XC6382A, XC6382B) PIN NUMBER XC6382A SOT-23 1 3 2 – SOT-89 1 2 3 – XC6382B SOT-23 1 3 – 2 SOT-89 1 2 – 3 VSS VOUT Lx EXT Ground Output voltage monitor, IC internal power supply Switch External switch transistor drive PIN NAME FUNCTION (XC6382C, XC6382D) PIN NUMBER XC6382C SOT-25 4 2 5 – 1 3 SOT-89-5 5 2 4 – 3 1 XC6382D SOT-25 4 2 – 5 1 3 SOT-89-5 5 2 – 4 3 1 VSS VDD Lx EXT CE NC Ground Output voltage monitor, IC internal power supply Switch External switch transistor drive Chip enable No connection PIN NAME FUNCTION (XC6382E, XC6382F) PIN NUMBER XC6382E SOT-25 4 2 5 – 1 3 SOT-89-5 5 2 4 – 3 1 XC6382F SOT-25 4 2 – 5 1 3 SOT-89-5 5 2 – 4 3 1 VSS VDD Lx EXT VOUT NC Ground IC internal power supply Switch External switch transistor drive Output voltage monitor No connection PIN NAME FUNCTION 488 XC6382 Series ■Product Classification GSelection Guide PART TYPE XC6382A DUTY RATIO 75% PACKAGE SOT-23, SOT-89 SOT-23, SOT-89 SOT-25, SOT-89-5 SOT-25, SOT-89-5 SOT-25, SOT-89-5 SOT-25, SOT-89-5 SWITCHING RELATED Built-in Transistor "Lx" lead External Transistor "EXT" lead Built-in Transistor "Lx" lead External Transistor "EXT" lead Built-in Transistor "Lx" lead External Transistor "EXT" lead Chip Enable(CE) ADDITIONAL FUNCTION • Accommodates FEATURES a duty ratio of 75%. XC6382B 75% • Accommodates a duty ratio of 75%. • Adding an external transistor can improve the output capability by up to several hundred mA. • Stand-by XC6382C 75% (CE) function added version to the XC6382A. • Stand-by current: 0.5µA max. • Stand-by XC6382D 75% Chip Enable(CE) (CE) function added version to the XC6382B. • Stand-by current: 0.5µA max. XC6382E 75% • Independent power supply and set-up voltage Separated "VDD" and "VOUT" leads sensing leads allow designing of PFM controllers. • Independent power supply and set-up voltage Separated "VDD" and "VOUT" leads sensing leads allow designing of PFM controllers. 4 XC6382F 75% GOrdering Information XC6382qwerty XC6382 Series A B q C D E F w e r 1 M t P y R L Package PFM Controlled Duty 75% 3-pin. Built-in switching transistor 3-pin. External switching transistor Stand-by capability. (5-pin) Built-in switching transistor Stand-by capability. (5-pin) External switching transistor Separated VDD and VOUT. (5-pin) Built-in switching transistor Separated VDD and VOUT. (5-pin) External switching transistor Output Voltage e.g.VOUT=3.5V ➔ w=3, e=5 Maximum Oscillator Frequency Package q=A~B q=C~F q=A~B q=C~F 100kHz SOT-23 SOT-25 SOT-89 SOT-89-5 Embossed tape : Standard Feed Embossed tape : Reverse Feed 489 XC6382 Series ■Packaging Information GSOT-23 0.4 +0.1 -0.05 0.15 -0.05 +0.1 0∼0.1 2.8±0.2 1.6 +0.2 -0.1 （0.95） 1.1±0.1 4 1.9±0.2 2.9±0.2 GSOT-25 +0.1 0.4 +0.1 -0.05 2.8±0.2 1.6 +0.2 -0.1 0.2min 0.15 -0.05 0∼0.1 （0.95） 1.9±0.2 2.9±0.2 1.1±0.1 490 0.2min XC6382 Series GSOT-89 4.5±0.1 1.6 +0.15 -0.2 1.5±0.1 （0.4） 2.5±0.1 0.8 min 4.25max 0.42±0.06 0.47±0.06 1.5±0.1 1.5±0.1 0.42±0.06 0.4 +0.03 -0.02 4 GSOT-89-5 1.6 -0.2 0.42±0.06 （0.4） +0.15 1.5±0.1 0.42±0.06 0.8min 2.5±0.1 0.8min 4.5max 0.4 +0.03 -0.02 0.42±0.06 0.42±0.06 0.42±0.06 0.47±0.06 1.5±0.1 1.5±0.1 4.5±0.1 491 XC6382 Series ■Marking qwer qwer w q r e 2 1 4 3 SOT-23 (TOP VIEW) SOT-25 (TOP VIEW) SOT-89 (TOP VIEW) SOT-89-5 (TOP VIEW) q Represents the Product Classification DESIGNATOR E F L M N P − − CE CE VDD/VIN VDD/VIN FUNCTION Built-in Transistor External Transistor Built-in Transistor External Transistor Built-in Transistor External Transistor PRODUCT NAME XC6382A＊＊＊＊＊ XC6382B＊＊＊＊＊ XC6382C＊＊＊＊＊ XC6382D＊＊＊＊＊ XC6382E＊＊＊＊＊ XC6382F＊＊＊＊＊ 4 w Represents the integer of the Output Voltage and Oscillator Frequency INTEGER OF THE OUTPUT VOLTAGE 1 2 3 4 5 6 7 OSCILLATOR FREQUENCY（kHz） 100 1 2 3 4 5 6 7 e Represents the decimal number of the Output Voltage and Oscillator Frequency OUTPUT VOLTAGE 0 1 2 3 4 5 6 7 8 9 OSCILLATOR FREQUENCY（kHz） 100 0 1 2 3 4 5 6 7 8 9 r Denotes the production lot number 0 to 9, A to Z repeated(G.I.J.O.Q.W excepted) 492 XC6382 Series ■Block Diagram ●XC6382A~XC6382D (VOUT pin serves as VDD also.) Lx VLx limiter Buffer ＋ VSS PFM Control OSC 100kHz − Vref VOUT VDD EXT Chip Enable 4 CE Note: Built-in Tr types use the Lx pin, external Tr types use the EXT pin. The CE pin is only used with the XC6382C and XC6382D. ●XC6382E and XC6382F VDD Lx VLx limiter Buffer ＋ VSS PFM Control OSC 100kHz − Vref VOUT VDD EXT Note: The VDD pin is only used with the XC6382E and XC6382F. Built-in Tr types use the Lx pin , external Tr types use the EXT pin. 493 XC6382 Series ■Absolute Maximum Ratings PARAMETER VOUT Input Voltage Lx pin Voltage Lx pin Current EXT pin Voltage EXT pin Current CE Input Voltage VDD Input Voltage Continuous Total Power Dissipation SOT-23 SOT-89 Topr Tstg SYMBOL VOUT VLX ILX VEXT IEXT VCE VDD Pd RATINGS 12 12 400 VSS–0.3~VOUT+0.3 ±50 12 12 150 500 –30~+80 –40~+125 Ta=25°C UNITS V V mA V mA V V mW °C °C Operating Ambient Temperature 4 Storage Temperature 494 XC6382 Series ■Electrical Characteristics XC6382A301MR PARAMETER Output Voltage Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage No-Load Input Current Supply Current 1 (Note 2) Supply Current 2 Lx Switch-On Resistance Lx Leakage Current Duty Ratio Maximum Oscillation Frequency Stand-by Current Lx Limit Voltage Efficiency VOUT=3.0V SYMBOL VOUT VIN VST VHLD IIN IDD1 IDD2 RSWON ILXL DTY MAXFOSC ISTB VLxLMT EFFI IOUT=1mA IOUT=1mA IOUT=0mA(Note1) VIN=VOUT ✕ 0.95 VIN=VOUT+0.5V Same as IDD1. VLX=0.4V. No external components. VOUT=VLX=10V. Same as IDD1. Measuring of Lx waveform. Same as IDD1. 75% duty. Same as IDD1. Same as IDD1, FOSC > MAXFOSC ✕ 2 L,SD,CL etc. connected 0.7 80 1.1 V % 70 85 75 100 0.70 4.6 19.7 2.1 5.2 9.3 39.4 4.2 7.9 1.0 80 115 CONDITIONS L,SD,CL etc. connected MIN 2.925 10 0.80 0.90 TYP 3.000 MAX 3.075 Ta=25°C UNITS V V V V µA µA µA Ω µA % kHz 4 Measuring conditions: Unless otherwise specified, VIN=VOUT ✕ 0.6, IOUT=30mA. See Typical Application Circuits, Fig.1. Note: 1. The Schottky diode (SD) must be type MA735, with reverse current (IR) MAXFOSC ✕ 2 L,SD,CL etc. connected 0.7 85 1.1 70 85 75 100 0.70 5.3 31.7 2.4 2.8 10.6 63.4 4.8 4.3 1.0 80 115 CONDITIONS L,SD,CL etc. connected MIN 4.875 10 0.80 0.90 TYP 5.000 MAX 5.125 Ta=25°C UNITS V V V V µA µA µA Ω µA % kHz Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage No-Load Input Current Supply Current 1 (Note 2) Supply Current 2 Lx Switch-On Resistance Lx Leakage Current Duty Ratio Maximum Oscillation Frequency Stand-by Current Lx Limit Voltage Efficiency V % Measuring conditions: Unless otherwise specified, VIN=VOUT ✕ 0.6, IOUT=50mA. See Typical Application Circuits, Fig.1. Note: 1. The Schottky diode (SD) must be type MA735, with reverse current (IR)