XC6406PE20DL

◆Low Power Consumption : 40μA (MAX.) ◆Dropout Voltage : 150mV @ 100mA : 300mV @ 200mA ◆Maximum Output Current : More Than 400mA ◆High Accuracy :±2% ■APPLICATIONS ●CD-ROM, DVD ●Battery powered equipment ●PDAs ●Cameras, Video recorders ●Portable AV equipment ●Reference voltage ■GENERAL DESCRIPTION The XC6406 series are highly precise, low power consumption, dual positive regulators. They are fabricated using Torex’s CMOS process. Performance features of the series include high current and low dropout voltage, and the series features a voltage reference, and error amplifier, a current limiter and a phase compensation circuit plus a driver transistor. Output voltage of each regulator 1 and regulator 2 is selectable in 100mV steps within the range of 1.8V to 6.0V. The XC6406 series is available in the SOP-8 package. ■FEATURES Maximum Output Current Maximum Operating Voltage Accuracy Low Power Consumption Line Regulation Output Voltage Temperature Range Small Packages : 100 ppm/℃ (TYP.) : SOP-8 : SOP-8FD (Under development) Operating Temperature Range : - 40℃ ~ 85℃ : 400mA (within the power dissipation) : 8.0V :±2% : 20μA (TYP.) : 0.2% / V (TYP.) Output Setting Voltage Range : 1.8 ~ 6.0V (100mV steps) ■TYPICAL APPLICATION CIRCUIT 1 2 3 4 VOUT1 VIN VIN VOUT2 VSS NC VSS NC 8 7 6 5 CL1 :1uF (Tantalum) CIN :1uF (Tantalum) CL2 :1uF (Tantalum) * Please connect the VIN pins No. 2 and No. 3 externally. **Please connect the VSS pins No. 6 and No. 8 externally. 345 XC6406 Series ■PIN CONFIGURATION VOUT1 1 VIN 2 VIN 3 VOUT2 4 8 VSS 7 NC 6 VSS 5 NC SOP-8 & SOP-8FD (TOP VIEW) * Please connect the VIN pins No. 2 and No. 3 externally. **Please connect the VSS pins No. 6 and No. 8 externally. ■PIN ASSIGNMENT PIN NUMBER 1 2 3 4 5 6 7 8 PIN NAME VOUT1 VIN VIN VOUT2 NC VSS NC VSS FUNCTION Regulator 1 - Output Power Input Power Input Regulator 2 - Output No Connection Ground No Connection Ground ■PRODUCT CLASSIFICATION ●Ordering Information XC6406①②③④⑤⑥ DESIGNATOR ① ② ③④ ⑤ ⑥ DESCRIPTION Type of Regulator 1 (VR1) Type of Regulator 2 (VR2) Output Voltage of VR1 & VR2 Package Device Orientation SYMBOL P E P E 18~ 60 S (T.B.D.*2) R L DESCRIPTION : Short-circuit protection circuit built-in : No current limiter circuit built-in : Short-circuit protection circuit built-in : No current limiter circuit built-in : VR1 setting output voltage range: 1.8V ~ 6.0V VR2 setting output voltage range: 1.8V ~ 6.0V 100mV increments are available.(*1) : SOP-8 : SOP-8FD : Embossed tape, Standard feed : Embossed tape, Reverse feed *1: Output voltage of 50mV steps is applied only for 2.85V type. *2: T.B.D.: To be determined 346 XC6406 Series ■PACKAGING INFORMATION ●SOP-8 0.2 +- 0.05 0.1 6. +0.4 -0.3 1 4.2 + 0.4 +0.15 1.58 -0.18 0~0.25 1.5+0.1 1.27+0.03 0.4+0.1 0.10 ●SOP-8FD 0.2 -0.01 +0.05 (2.79) 0~ 10 +0.5 5.0 -0.2 0.4+0.04 O 3.9+0.09 (2.41) 6.0+0.2 4.85 +0.10 -0.05 8 0~ 0.4+0.1 (1.27) 0~0.25 1.6+0.13 (1.45) 0.35~1.0 347 XC6406 Series ■MARKING RULE ●SOP-8 8 7 6 5 ①②Represents product series MARK ① 0 ② 6 PRODUCT SERIES XC6406****S* ①②③ ④⑤⑥ ⑦⑧⑨ ③Represents type of VR1 regulator MARK P E VR1REGULATOR TYPE Short-Circuit Protection Circuit Built-In No Current Limiter Circuit Built-In PRODUCT SERIES XC6406P***S* XC6406E***S* 1 2 3 4 SOP-8 (TOP VIEW) ④Represents type of VR2 regulator MARK P E VR2REGULATOR TYPE Short-Circuit Protection Circuit Built-In No Current Limiter Circuit Built-In PRODUCT SERIES XC6406P***S* XC6406E***S* ⑤⑥Represents VR output voltage ex) MARK ⑤ 0 ⑥ 1 VOLTAGE(V) VR1 VR2 3.3 2.5 PRODUCT SERIES XC6406**01S* ⑦Represents a least significant digit of production year ex) MARK 3 4 PRODUCTION YEAR 2003 2004 ⑧⑨Represents production lot number 0 to 9, A to Z repeated(G,I,J,O,Q,W excepted) Note: No character inversion used. ex) MARK ⑧ 0 ⑨ 3 1 PRODUCTION LOT NUMBER 03 1A 348 XC6406 Series ■ABSOLUTE MAXIMUM RATINGS Ta = 25℃ PARAMETER Input Voltage Output Current Output Voltage EN Pin Voltage Power Dissipation SOP-8 SOP-8FD SYMBOL VIN IOUT1 + IOUT2 VOUT1 / 2 VEN1 / 2 Pd Topr Tstg RATINGS 10 600 VSS – 0.3 ~ VIN + 0.3 VSS – 0.3 ~ VIN + 0.3 300 300 - 40 ~ + 85 - 55 ~ + 125 UNITS V mA V V mW ℃ ℃ Operating Temperature Range Storage Temperature Range ■ELECTRICAL CHARACTERISTICS XC6406EExx PARAMETER Supply Current Input Voltage SYMBOL IDD VIN CONDITIONS VIN =7V MIN. TYP. 20 MAX. 40 8.0 UNITS μA V * Please connect the VIN pins No. 2 and No. 3 externally. **Please connect the VSS pins No. 6 and No. 8 externally VOUT(T) = 1.8V PARAMETER Output Voltage (*2) Maximum Output Current Load Regulation Dropout Voltage (*3) SYMBOL VOUT(E) IOUTMAX VOUT Vdif1 Vdif2 VOUT VIN・VOUT VOUT Topr・VOUT CONDITIONS VIN=2.8V, IOUT=40mA VIN=2.8V, VOUT≧VOUT(E) x 0.9 VIN=2.8V, 1mA≦IOUT≦200mA IOUT=100mA IOUT=200mA 2.8V≦VIN≦8.0V, IOUT=40mA IOUT=40mA, -40℃≦Topr≦85℃ MIN. 1.764 400 TYP. 1.800 VOUT(T) 40 200 400 0.2 MAX. 1.836 100 300 600 0.3 Ta=25℃ UNITS V mA mV mV MV %/V ppm /℃ Line Regulation Output Voltage Temperature Range - ±100 - NOTE: *1: VOUT(T) : Specified output voltage *2: VOUT(E) : Effective output voltage (I.e. the output voltage when "VOUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IOUT.) (*5) (*4) *3: Vdif={VIN1 - VOUT1 } *4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized VOUT1=IOUT{VOUT(T)+1.0V} is input. *5: VIN1=The input voltage when VOUT1 appears as input voltage is gradually decreased. 349 XC6406 Series ■ELECTRICAL CHARACTERISTICS (Continued) XC6406EExx (Continued) VOUT(T) = 2.5V PARAMETER Output Voltage (*2) Maximum Output Current Load Regulation Dropout Voltage (*3) SYMBOL VOUT(E) IOUTMAX VOUT Vdif1 Vdif2 VOUT VIN・VOUT VOUT Topr・VOUT CONDITIONS VIN=3.5V, IOUT=40mA VIN=3.5V, VOUT≧VOUT(E) x 0.93 VIN=3.5V, 1mA≦IOUT≦200mA IOUT=100mA IOUT=200mA 3.5V≦VIN≦8.0V, IOUT=40mA IOUT=40mA, -40℃≦Topr≦85℃ MIN. 2.450 400 TYP. 2.500 VOUT(T) 40 170 320 0.2 MAX. 2.550 100 250 500 0.3 Ta=25℃ UNITS V mA mV mV mV %/V ppm /℃ Line Regulation Output Voltage Temperature Range - ±100 - NOTE: *1: VOUT(T) : Specified output voltage *2: VOUT(E) : Effective output voltage (I.e. the output voltage when "VOUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IOUT.) (*5) (*4) *3: Vdif={VIN1 - VOUT1 } *4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized VOUT1=IOUT{VOUT(T)+1.0V} is input. *5: VIN1=The input voltage when VOUT1 appears as input voltage is gradually decreased. VOUT(T) = 3.3V PARAMETER Output Voltage (*2) Maximum Output Current Load Regulation Dropout Voltage (*3) SYMBOL VOUT(E) IOUTMAX VOUT Vdif1 Vdif2 VOUT VIN・VOUT VOUT Topr・VOUT CONDITIONS VIN=4.3V, IOUT=40mA VIN=4.3V, VOUT≧VOUT(E) x 0.93 VIN=4.3V, 1mA≦IOUT≦200mA IOUT=100mA IOUT=200mA 3.5V≦VIN≦8.0V, IOUT=40mA IOUT=40mA, -40℃≦Topr≦85℃ MIN. 3.234 400 TYP. 3.300 VOUT(T) 40 150 300 0.2 MAX. 3.366 100 220 420 0.3 Ta=25℃ UNITS V mA mV mV mV %/V ppm /℃ Line Regulation Output Voltage Temperature Range ±100 NOTE: *1: VOUT(T) : Specified output voltage *2: VOUT(E) : Effective output voltage (I.e. the output voltage when "VOUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IOUT.) (*5) (*4) *3: Vdif={VIN1 - VOUT1 } *4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized VOUT1=IOUT{VOUT(T)+1.0V} is input. *5: VIN1=The input voltage when VOUT1 appears as input voltage is gradually decreased. 350