XC6501A44AMR-G

XC6501 ETR03037-014b 200mA High Speed LDO Regulator, Output Capacitor-Less, Low Power Consumption ■GENERAL DESCRIPTION The XC6501 series is a high speed, low noise CMOS LDO regulator that can provide stable output voltages even without a load capacitor CL. This is possible because phase compensation is carried out internally unlike other LDOs where it is done externally. The series consists of a reference voltage source, driver transistor, error amplifier, current limit circuit, and phase compensation circuit. The CE function enables the circuit to be put into stand-by mode by inputting a low level signal to the CE pin thereby reducing current consumption from an already low 13μA (in operation) to less than 0.1μA. In the stand-by mode, if a CL capacitor is used, the electric charge stored at CL can be discharged via the internal auto-discharge switch and as a result, the VOUT pin quickly returns to the VSS level. The current limit fold-back circuit operates as a short circuit protection and a current limiter function for the output pin. ■FEATURES ■APPLICATIONS ●Smart phones / Mobile phones ●Portable games Maximum Output Current : 200mA Operating Voltage Range : 1.4V ~ 6.0V Output Voltage Range ●Modules (wireless, cameras,etc.) : 2.0V ~ 5.0V (±1%) (*1) 1.2V ~ 1.95V (±0.02V) (*1) ●Bluetooth Dropout Voltage : 150mV＠IOUT=100mA, VOUT=2.8V ●Digital-TV tuners Low Power Supply : 13μA ＠VOUT=2.8V Stand-by Current : Less than 0.1μA Ripple Rejection : 50dB＠f=1kHz,VOUT=2.8V Protection Circuits : Current limit (300mA, TYP.) Short circuit protection CL High Speed Auto-Discharge Output capacitor is not required : Internal phase compensation CL High Speed Auto Discharge Operating Ambient Temperature : -40℃~ 85℃ Packages : SOT-25, SSOT-24, USP-4, Environmentally Friendly : USPN-4, USP-3, WLP-4-01 EU RoHS Compliant, Pb Free (*1) WLP-4-01 : 2.0~5.0V(±2%), 1.2~1.95V(±0.03V) ■TYPICAL APPLICATION CIRCUIT ■TYPICAL PERFORMANCE CHARACTERISTICS VOUT VOUT 1 4 XC6501 Series CL:0.1μF(ceramic) 2 3 CE INPUT Ta=25℃,tr=tf=5μs C IN=0.1μF (ceramic) VSS 3.2 OUT (V) USP-4 (BOTTOM VIEW) XC6501A/B/C/D Series VIN CIN:0.1μF(ceramic) VOUT 1 VIN 2 VOUT 3 VSS USP-3 (BOTTOM VIEW) XC6501P Series CL:0.1μF(ceramic) Output Voltage: V CIN:0.1μF(ceramic) 3.0 300 Without CL無しCL CL =1.0μF 250 2.8 200 2.6 150 2.4 2.2 100 Output Current 2.0 50 Output Current: I OUT (mA) VIN VIN 0 Time (40μs/div) 1/25 XC6501 Series ■BLOCK DIAGRAMS 1) XC6501 Series A type 2) XC6501 Series B type VIN VOUT VIN VOUT CFB Current Limit CE ON / OFF Control CFB + Error Amp each circuit Voltage Reference R1 Current Limit R1 R2 CE ON / OFF Control + Error Amp each circuit Voltage Reference RDCHG R2 /CE VSS VSS 3) XC6501 Series C type 4) XC6501 Series D type VIN VOUT VIN VOUT CFB Current Limit + Error Amp CE ON / OFF Control CFB R1 R1 Current Limit + Error Amp - R2 Voltage Reference CE ON/ OFF Control Voltage Reference RDCHG R2 /CE VSS each circuit each circuit 5) XC6501 Series P type VIN VOUT CFB Current Limit R1 + Error Amp - *Diodes inside the circuit are an ESD protection diode and a parasitic diode. R2 Voltage Reference VSS 2/25 VSS XC6501 Series ■PRODUCT CLASSIFICATION ●Ordering Information XC6501①②③④⑤⑥-⑦(*1) : Except WLP-4-01, USP-3 DESIGNATOR ITEM SYMBOL ① Regulator Type ②③ Output Voltage ④ Output Voltage Type [Accuracy] ⑤⑥-⑦(*1) (*1) Packages (Order Unit) 1 A GR-G NR-G MR-G 7R-G DESCRIPTION CE High Active, Without CE Pull-down, Without CL discharge CE High Active, Without CE Pull-down, With CL discharge CE High Active, With CE Pull-down, Without CL discharge CE High Active, With CE Pull-down, With CL discharge ex.) 2.8V → ②=2, ③=8 0.1V increments ex.)1.80V → ②=1, ③=8, ④=1 [±0.02V @ 1.2V ~ 1.9V, ±1% @ 2.0V ~ 5.0V] 0.05V increments ex.)1.85V → ②=1, ③=8, ④=A [±0.02V @ 1.25V ~ 1.95V, ±1% @ 2.05V ~ 4.95V] USP-4 (3,000pcs/Reel) SSOT-24 (3,000pcs/Reel) SOT-25 (3,000pcs/Reel) USPN-4 (5,000pcs/Reel) The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant. XC6501①②③④⑤⑥-⑦(*1) : WLP-4-01 DESIGNATOR ITEM ① Regulator Type ②③ Output Voltage ④ Output Voltage Type [Accuracy] ⑤⑥-⑦(*1) (*1) A B C D 12 ~ 50 Packages (Order Unit) SYMBOL DESCRIPTION A B C D 12 ~ 50 CE High Active, Without CE Pull-down, Without CL discharge CE High Active, Without CE Pull-down, With CL discharge CE High Active, With CE Pull-down, Without CL discharge CE High Active, With CE Pull-down, With CL discharge ex.) 2.8V → ②=2, ③=8 0.1V increments ex.)1.80V → ②=1, ③=8, ④=2 [±0.03V @ 1.2V ~ 1.4V, ±2% @1.5V ~ 5.0V] 0.05V increments ex.)1.85V → ②=1, ③=8, ④=B [±0.03V @ 1.25V ~ 1.45V, ±2% @ 1.55V ~ 4.95V] 2 B 0R-G WLP-4-01 (5,000pcs/Reel) The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant. XC6501①②③④⑤⑥-⑦(*1) : Three-terminal regulator DESIGNATOR ITEM SYMBOL ① ②③ Regulator Type Output Voltage ④ Output Voltage Type [Accuracy] ⑤⑥-⑦(*1) (*1) Packages (Order Unit) P 12 ~ 50 1 A HR-G DESCRIPTION 3 pin, without CE pin ex.) 2.8V → ②=2, ③=8 0.1V increments ex.)1.80V → ②=1, ③=8, ④=1 [±0.02V @ 1.2V ~ 1.9V, ±1% @ 2.0V ~ 5.0V] 0.05V increments ex.)1.85V → ②=1, ③=8, ④=A [±0.02V @ 1.25V ~ 1.95V, ±1% @ 2.05V ~ 4.95V] USP-3 (3,000pcs/Reel) The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant. 3/25 XC6501 Series ■PIN CONFIGURATION VOUT 1 VIN 4 1 VOUT VOUT 2 3 CE CE 3 2 VSS VIN 1 2 VIN VSS 4 WLP-4-01 (BOTTOM VIEW) USPN-4 (BOTTOM VIEW) 3 VSS VSS 2 3 CE VOUT 1 4 VIN USP-3 (BOTTOM VIEW) USP-4 (BOTTOM VIEW) VIN VOUT 4 3 1 2 CE VSS VOUT NC 5 4 1 2 3 VIN VSS CE SSOT-24 (TOP VIEW) SOT-25 (TOP VIEW) *The heat dissipation pad of the USP-4 package is reference to solder as the reference mount pattern and metal mask pattern for mounting strength. The mount pattern should be electrically opened or connected to the VSS (No.2) pin. ■PIN ASSIGNMENT PIN NUMBER PIN NAME FUNCTIONS 4 VIN Power Supply Input 1 VOUT Output 2 2 VSS Ground 3 3 CE ON/OFF Control 4 - NC No Connection WLP-401 USP-3 USP-4 SSOT-24 SOT-25 USPN-4 2 1 4 4 1 1 2 1 3 5 4 3 2 2 3 - 3 1 - - - - ■FUNCTION CHART 1) XC6501 series A/B type PIN NAME CE 2) XC6501 series C/D type SIGNAL STATUS L OFF H ON OPEN Undefined PIN NAME CE SIGNAL STATUS L OFF H ON OPEN OFF ■ ABSOLUTE MAXIMUM RATINGS PARAMETER Input Voltage Output Voltage CE Input Voltage SYMBOL VIN VOUT VCE USPN-4 USP-3 USP-4 Power Dissipation (Ta=25℃) Pd SSOT-24 SOT-25 WLP-4-01 Operating Ambient Temperature Storage Temperature Topr Tstg RATINGS -0.3 ~ 6.5 -0.3 ~ VIN + 0.3 or 6.5 (*1) -0.3 ~ 6.5 100 (IC only) 600 (40mm×40mm Standard board) (*2) 120 (IC only) 1000 (40mm×40mm Standard board ) (*2) 120 (IC only) 1000 (40mm×40mm Standard board ) (*2) 150 (IC only) 500 (40mm×40mm Standard board ) (*2) 680 (JESD51-7 board) (*2) 250 (IC only) 600 (40mm×40mm Standard board ) (*2) 760 (JESD51-7 board) (*2) 660 (40mm×40mm Standard board ) (*2) -40 ~ 85 -55 ~ 125 * All voltages are described based on the VSS pin. (*1) The maximum value should be VIN+0.3V or 6.5V in the lowest. (*2) The power dissipation figure shown is PCB mounted and is for reference only. Please refer to PACKAGING INFORMATION for the mounting condition. 4/25 UNITS V V V mW ℃ ℃ XC6501 Series ■ELECTRICAL CHARACTERISTICS ●XC6501 Series A/B/C/D Type PARAMETER Ta=25℃ SYMBOL CONDITIONS VOUT(T) Output Voltage VOUT(E)(*1) (*2) -0.02 ≦1.95V VOUT(T)≧2.0V ×0.99 Line Regulation Input Voltage Output Voltage Temperature Characteristics ×0.98 IOUTMAX VCE=VIN ΔVOUT VCE=VIN、0.1mA≦IOUT≦100mA Vdif ISS ISTBY VCE=VIN、IOUT=100mA TYP. MAX. (*3) -0.03(*3) VCE=VIN、IOUT=10mA VCE=VIN、IOUT=10mA Maximum Output Current Load Regulation Dropout Voltage (*4) Supply Current Stand-by Current MIN. (*3) UNITS CIRCUIT V ① - mA ① 45 mV ① +0.02 VOUT（T） （*3） +0.03(*3) ×1.01(*3) ×1.02 200 - - 15 - E-1 (*3) （*3） (*5) E-2(*6) VIN=VCE=6.0V、IOUT=0mA ① ② - 0.01 0.1 μA ② - 0.10 0.20 %/V ① 1.4 - 6.0 V ① - ±100 - ppm/℃ ① - 50 - dB ③ 210 300 - mA ① - 25 - mA ① VCEH 1.0 - 6.0 V ① VCEL VSS - 0.25 V ① μA ① ① ΔVOUT/ (ΔVIN・VOUT) VIN=6.0V、VCE=VSS mV μA VOUT(T)+0.5V≦VIN≦6.0V、 VCE=VIN、IOUT=30mA VIN ΔVOUT/ VCE=VIN、IOUT=30mA (ΔTopr・VOUT) -40℃≦Topr≦85℃ VOUT(T)≦4.75V VIN=｛VOUT(T)+1.0｝VDC+0.5Vp-pAC Power Supply Rejection Ratio PSRR VCE=VIN、IOUT=30mA、f=1kHz VOUT(T)≧4.80V VIN=5.75VDC+0.5Vp-pAC VCE=VIN、IOUT=30mA、f=1kHz Current Limit Short - Circuit Current CE “H” Level Voltage CE “L” Level Voltage CE “H” Level Current CE “L” Level Current CL AutoDischarge Resistance (*7) ILIM ISHORT VCE=VIN VCE=VIN 、 VOUT is short-circuited at the VSS level XC6501A/B -0.1 - 0.1 XC6501C/D 3.5 6.0 10 -0.1 - 0.1 μA VIN=6.0V、VOUT=1.2V、VCE=VSS - 250 300 Ω VIN=6.0V、VOUT=5.0V、VCE=VSS - 400 480 Ω ICEH VCE=VIN=6.0V ICEL VCE=VIN RDCHG ① Notes: Unless otherwise stated regarding input voltage conditions, VIN=VOUT(T) (*2)+1.0V. *1: VOUT(E): An actual output voltage when an amply stabilized(VOUT(T)+1.0V) is supplied with constant IOUT. *2: VOUT(T): Nominal output voltage value *3: MIN and MAX values of VOUT(E) are shown in the voltage table “E-0”. *4: Vdif={VIN1 – VOUT1} VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased. VOUT1: A voltage equal to 98% of the output voltage when an amply stabilized IOUT (VOUT(T)+1.0V) is input. *5: Please refer to page E-1. *6: Please refer to page E-2. *7: This function is built in the XC6501B/D series only. The XC6501A/C series discharges by only R1+ R2 resistors as shown in the block diagrams. 5/25 XC6501 Series ■ELECTRICAL CHARACTERISTICS (Continued) ●XC6501 Series P Type PARAMETER Ta=25℃ SYMBOL CONDITIONS VOUT(T) Output Voltage VOUT(E)(*1) (*2) ≦1.95V IOUT=10mA VOUT(T)≧2.0V IOUT=10mA Maximum Output Current IOUTMAX Output Voltage Dropout Voltage (*4) Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics ΔVOUT Vdif ISS ΔVOUT/ (ΔVIN・VOUT) 0.1mA≦IOUT≦100mA IOUT=100mA VOUT(T)+0.5V≦VIN≦6.0V、 IOUT=30mA ΔVOUT/ IOUT=30mA -40℃≦Topr≦85℃ TYP. MAX. -0.02（*3） UNITS CIRCUIT V ① - mA ① 45 mV ① mV ① μA ② +0.02（*3） VOUT(T) ×0.99 （*3） ×1.01 200 - - 15 - VIN=6.0V、IOUT=0mA VIN （ΔTopr・VOUT） MIN. E-1 E-2 （*3） (*5) (*6) - 0.10 0.20 %/V ① 1.4 - 6.0 V ① - ±100 - ppm ① - 50 - dB ③ 210 300 - mA ① - 25 - mA ① VOUT(T)≦4.75V VIN=｛VOUT(T)+1.0｝VDC+0.5Vp-pAC Power Supply Rejection Ratio PSRR IOUT=30mA、f=1kHz VOUT(T)≧4.80V VIN=5.75VDC+0.5Vp-pAC IOUT=30mA、f=1kHz Current Limit ILIM Short Circuit Current ISHORT VOUT is short-circuited at the VSS level Notes: Unless otherwise stated regarding input voltage conditions, VIN=VOUT(T) (*2)+1.0V. *1: VOUT(E): An actual output voltage when an amply stabilized(VOUT(T)+1.0V) is supplied with constant IOUT. *2: VOUT(T): Nominal output voltage value *3: MIN and MAX values of VOUT(E) are shown in the voltage table “E-0”. *4: Vdif={VIN1 – VOUT1} VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased. VOUT1: A voltage equal to 98% of the output voltage when an amply stabilized IOUT (VOUT(T)+1.0V) is input. *5: Please refer to page E-1. *6: Please refer to page E-2. 6/25 XC6501 Series ■ELECTRICAL CHARACTERISTICS (Continued) ●Voltage Chart E-0 E-1 E-2 OUTPUT VOLTAGE (WLP-4-01) DROPOUT VOLTAGE SUPPLY CURRENT NOMINAL VOLTAGE OUTPUT VOLTAGE (Except WLP-4-01) (V) (V) (V) (mV) (μA) VOUT(E) VOUT(E) Vdif ISS VOUT(T) MIN. MAX. MIN. MAX. 1.20 1.1800 1.2200 1.1700 1.2300 1.25 1.2300 1.2700 1.2200 1.2800 1.30 1.2800 1.3200 1.2700 1.3300 1.35 1.3300 1.3700 1.3200 1.3800 1.40 1.3800 1.4200 1.3700 1.4300 1.45 1.4300 1.4700 1.4200 1.4800 1.50 1.4800 1.5200 1.4700 1.5300 1.55 1.5300 1.5700 1.5190 1.5810 1.60 1.5800 1.6200 1.5680 1.6320 1.65 1.6300 1.6700 1.6170 1.6830 1.70 1.6800 1.7200 1.6660 1.7340 1.75 1.7300 1.7700 1.7150 1.7850 1.80 1.7800 1.8200 1.7640 1.8360 1.85 1.8300 1.8700 1.8130 1.8870 1.90 1.8800 1.9200 1.8620 1.9380 1.95 1.9300 1.9700 1.9110 1.9890 2.00 1.9800 2.0200 1.9600 2.0400 2.05 2.0295 2.0705 2.0090 2.0910 2.10 2.0790 2.1210 2.0580 2.1420 2.15 2.1285 2.1715 2.1070 2.1930 2.20 2.1780 2.2220 2.1560 2.2440 2.25 2.2275 2.2725 2.2050 2.2950 2.30 2.2770 2.3230 2.2540 2.3460 2.35 2.3265 2.3735 2.3030 2.3970 2.40 2.3760 2.4240 2.3520 2.4480 2.45 2.4255 2.4745 2.4010 2.4990 2.50 2.4750 2.5250 2.4500 2.5500 2.55 2.5245 2.5755 2.4990 2.6010 2.60 2.5740 2.6260 2.5480 2.6520 2.65 2.6235 2.6765 2.5970 2.7030 2.70 2.6730 2.7270 2.6460 2.7540 2.75 2.7225 2.7775 2.6950 2.8050 2.80 2.7720 2.8280 2.7440 2.8560 2.85 2.8215 2.8785 2.7930 2.9070 2.90 2.8710 2.9290 2.8420 2.9580 2.95 2.9205 2.9795 2.8910 3.0090 3.00 2.9700 3.0300 2.9400 3.0600 3.05 3.0195 3.0805 2.9890 3.1110 TYP. MAX. 440 690 300 610 MIN. TYP. MAX. 11 17 5 260 530 230 470 18 200 430 190 410 12 19 6 210 380 13 20 150 360 7 14 7/25 XC6501 Series ■ELECTRICAL CHARACTERISTICS (Continued) ●Voltage Table (continued) E-0 E-1 E-2 NOMINAL VOLTAGE OUTPUT VOLTAGE (Except WLP-4-01) OUTPUT VOLTAGE (WLP-4-01) DROPOUT VOLTAGE SUPPLY CURRENT (V) (V) (V) (mV) (μA) VOUT(E) VOUT(E) Vdif ISS VOUT(T) MIN. MAX. MIN. MAX. 3.10 3.0690 3.1310 3.0380 3.1620 3.15 3.1190 3.1820 3.0870 3.2130 3.20 3.1680 3.2320 3.1360 3.2640 3.25 3.2175 3.2825 3.1850 3.3150 3.30 3.2670 3.3330 3.2340 3.3660 3.35 3.3165 3.3835 3.2830 3.4170 3.40 3.3660 3.4340 3.3320 3.4680 3.45 3.4155 3.4845 3.3810 3.5190 3.50 3.4650 3.5350 3.4300 3.5700 3.55 3.5145 3.5855 3.4790 3.6210 3.60 3.5640 3.6360 3.5280 3.6720 3.65 3.6135 3.6865 3.5770 3.7230 3.70 3.6630 3.7370 3.6260 3.7740 3.75 3.7125 3.7875 3.6750 3.8250 3.80 3.7620 3.8380 3.7240 3.8760 3.85 3.8115 3.8885 3.7730 3.9270 3.90 3.8610 3.9390 3.8220 3.9780 3.95 3.9105 3.9895 3.8710 4.0290 4.00 3.9600 4.0400 3.9200 4.0800 4.05 4.0095 4.0905 3.9690 4.1310 4.10 4.0590 4.1410 4.0180 4.1820 4.15 4.1085 4.1915 4.0670 4.2330 4.20 4.1580 4.2420 4.1160 4.2840 4.25 4.2075 4.2925 4.1650 4.3350 4.30 4.2570 4.3430 4.2140 4.3860 4.35 4.3065 4.3935 4.2630 4.4370 4.40 4.3560 4.4440 4.3120 4.4880 4.45 4.4055 4.4945 4.3610 4.5390 4.50 4.4550 4.5450 4.4100 4.5900 4.55 4.5045 4.5955 4.4590 4.6410 4.60 4.5540 4.6460 4.5080 4.6920 4.65 4.6035 4.6965 4.5570 4.7430 4.70 4.6530 4.7470 4.6060 4.7940 4.75 4.7025 4.7975 4.6550 4.8450 4.80 4.7520 4.8480 4.7040 4.8960 4.85 4.8015 4.8985 4.7530 4.9470 4.90 4.8510 4.9490 4.8020 4.9980 4.95 4.9005 4.9995 4.8510 5.0490 5.00 4.9500 5.0500 4.9000 5.1000 8/25 TYP. MAX. 150 360 140 350 MIN. TYP. MAX. 14 21 7 130 340 15 22 120 330 8 16 23 XC6501 Series ■OPERATIONAL EXPLANATION The voltage divided by resistors R1 & R2 is compared with the internal reference voltage by the error amplifier. The Pchannel MOSFET which is connected to the VOUT pin is then driven by the subsequent output signal. The output voltage at the VOUT pin is controlled & stabilized by a system of negative feedback. The current limit circuit and short protect circuit operate in relation to the level of output current. Further, the IC's internal circuitry can be shutdown via the CE pin's signal. VIN VOUT CFB R1 Current Limit CE ON / OFF Control + Error Amp each circuit Voltage Reference RDCHG R2 /CE VSS XC6501 Series B Type The XC6501B/D series can discharge the electric charge in the output capacitor CL, when a low signal to the CE pin, which enables a whole IC circuit turn off, is inputted via the N-channel transistor located between the VOUT pin and the VSS pin as shown in the BLOCK DIAGRAM. The CL auto-discharge resistance value is set at 400Ω(VOUT=5.0V @ VIN=6.0V at typical). The discharge time of the output capacitor CL is set by the CL auto-discharge resistance R and the output capacitor CL. By setting time constant of a CL auto-discharge resistance value RDCHG and an output capacitor value CL as τ (τ=C x RDCHG), the output voltage after discharge via the N-channel transistor is calculated by the following formulas. V= VOUT(E) ×e-t/τ or an expanded formula is ｔ=τ×ln(VOUT(E)/V) V : Output voltage after discharge VOUT(E) : Output voltage t : Discharge time τ：RDCHG×CL RDCHG：CL auto-discharge resistance CL：Output capacitor The XC6501 series’ fold-back circuit operates as an output current limiter and a short protection of the output pin. When the load current reaches the current limit level, the fixed current limiter circuit operates and output voltage drops. When the output voltage is shorted to the VSS, its current flow reached and minimized to about 25mA. The IC's internal circuitry can be shutdown via the signal from the CE pin with the XC6501 series. In shutdown mode output at the VOUT pin will be pulled down to the VSS level via R1 & R2. However, as for the XC6501B/D series, the CL autodischarge resistor is connected in parallel to R1 and R2 while the power supply is applied to the VIN pin. Therefore, time until the VOUT pin reaches the VSS level becomes short. The output voltage becomes unstable, when the CE pin is open. If this IC is used with the correct output voltage for the CE pin, the logic is fixed and the IC will operate normally. However, supply current may increase as a result of through current in the IC's internal circuitry when medium voltage is input. 9/25 XC6501 Series ■NOTES ON USE 1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be exceeded. 2. This IC achieves stable operation without an output capacitor CL by internal phase compensation. However, wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output current. Please wire the input capacitor CIN and the output capacitor CL as close to the IC as possible. 3. Torex places an importance on improving our products and their reliability. We request that users incorporate fail-safe designs and post-aging protection treatment when using Torex products in their systems. 4. Note on mounting (WLP) (1) Mount pad design should be optimized for user's conditions. (2) Sn-AG-Cu is used for the package terminals. If eutectic solder is used, mounting reliability is decreased. Please do not use eutectic solder paste. (3). When underfill agent is used to increase interfacial bonding strength, please take enough evaluation for selection. Some underfill materials and applied conditions may decrease bonding reliability. (4) The IC has exposed surface of silicon material in the top marking face and sides so that it is weak against mechanical damages. Please take care of handling to avoid cracks and breaks. (5) The IC has exposed surface of silicon material in the top marking face and sides. Please use the IC with keeping the circuit open (avoiding short-circuit from the out). (6) Semi-transparent resin is coated on the circuit face of the package. Please be noted that the usage under strong lights may affects device performance. 10/25 XC6501 Series ■TEST CIRCUITS ●Circuit ① ●測定回路① CIN=0.1μF (ceramic) VIN V A CE V IOUT A VOUT V VSS ●測定回路② ●Circuit ② A VIN V CE VOUT VSS ●測定回路③ ●Circuit ③ VIN V CE IOUT A VOUT VSS V The CE pin does not exist in the XC6501 series P type, please disregard CE description in above test circuit. 11/25 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS *CE Voltage condition: Unless otherwise stated, VCE =VIN 　　(1) Output Voltage vs. Output Current XC6501x121 1.2 0.9 0.6 Ta = -40℃ 0.3 Ta = 25℃ Ta = 25℃ CIN = 0.1μF (ceramic) 1.5 Output Voltage: VOUT [V] 1.5 Output Voltage: VOUT [V] XC6501x121 VIN = 2.2V CIN = 0.1μF (ceramic) 1.2 0.9 0.6 VIN = 1.5V 0.3 VIN = 1.7V Ta = 85℃ 0.0 VIN = 2.2V 0.0 0 50 100 150 200 250 300 350 400 Output Current: IOUT [mA] 0 50 XC6501x281 2.5 2.0 1.5 1.0 Ta = -40℃ Ta = 25℃ 0.5 Ta = 25℃ CIN = 0.1μF (ceramic) 3.0 Output Voltage: VOUT [V] Output Voltage: VOUT [V] XC6501x281 VIN = 3.8V CIN = 0.1μF (ceramic) 3.0 100 150 200 250 300 350 400 Output Current: IOUT [mA] 2.5 2.0 1.5 1.0 VIN = 3.1V 0.5 VIN = 3.3V Ta = 85℃ 0.0 VIN = 3.8V 0.0 0 50 100 150 200 250 300 350 400 Output Current: IOUT [mA] 0 50 XC6501x501 5.0 4.0 3.0 2.0 Ta = -40℃ Ta = 25℃ 1.0 Ta = 85℃ 0.0 5.0 4.0 3.0 2.0 VIN = 5.3V VIN = 5.5V 1.0 VIN = 6.0V 0.0 0 12/25 Ta = 25℃ CIN = 0.1μF (ceramic) 6.0 Output Voltage: VOUT [V] Output Voltage: VOUT [V] XC6501x501 VIN = 6.0V CIN = 0.1μF (ceramic) 6.0 50 100 150 200 250 300 350 400 Output Current: IOUT [mA] 100 150 200 250 300 350 400 Output Current: IOUT [mA] 0 50 100 150 200 250 300 350 400 Output Current: IOUT [mA] XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(2) Output Voltage vs. Input Voltage XC6501x121 1.2 1.0 0.8 IOUT = 10mA IOUT = 30mA 0.6 IOUT = 100mA Ta = 25℃ CIN = 0.1μF (ceramic) 1.26 Output Voltage: VOUT [V] 1.4 Output Voltage: VOUT [V] XC6501x121 Ta = 25℃ CIN = 0.1μF (ceramic) 0.4 1.24 1.22 1.20 1.18 IOUT = 10mA IOUT = 30mA 1.16 IOUT = 100mA 1.14 0.5 1.0 1.5 2.0 Input Voltage: VIN [V] 2.5 2.0 XC6501x281 2.6 2.4 IOUT = 10mA IOUT = 30mA IOUT = 100mA Ta = 25℃ CIN = 0.1μF (ceramic) 2.86 Output Voltage: VOUT [V] Output Voltage: VOUT [V] 2.8 2.2 2.0 2.84 2.82 2.80 2.78 IOUT = 10mA IOUT = 30mA 2.76 IOUT = 100mA 2.74 2.0 2.5 3.0 3.5 Input Voltage: VIN [V] 4.0 3.2 XC6501x501 6.0 4.8 4.6 IOUT = 10mA IOUT = 30mA IOUT = 100mA 4.2 Ta = 25℃ CIN = 0.1μF (ceramic) 5.06 Output Voltage: VOUT [V] 5.0 4.4 3.9 4.6 5.3 Input Voltage: VIN [V] XC6501x501 Ta = 25℃ CIN = 0.1μF (ceramic) 5.2 Output Voltage: VOUT [V] 6.0 XC6501x281 Ta = 25℃ CIN = 0.1μF (ceramic) 3.0 3.0 4.0 5.0 Input Voltage: VIN [V] 5.04 5.02 5.00 4.98 IOUT = 10mA IOUT = 30mA 4.96 IOUT = 100mA 4.94 4.0 4.5 5.0 5.5 Input Voltage: VIN [V] 6.0 5.2 5.4 5.6 5.8 Input Voltage: VIN [V] 6.0 13/25 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(3) Dropout Voltage vs. Output Current XC6501x121 CIN = 0.1μF (ceramic) Ta = -40℃ 0.8 Ta = 25℃ Ta = 85℃ 0.6 0.4 0.2 ※Below the minimum operating voltage CIN = 0.1μF (ceramic) 0.5 Dropout Voltage: Vdif [V] 1.0 Dropout Voltage: Vdif [V] XC6501x281 0.0 Ta = -40℃ 0.4 Ta = 25℃ Ta = 85℃ 0.3 0.2 0.1 0.0 0 50 100 150 Output Current: IOUT [mA] 200 0 50 100 150 Output Current: IOUT [mA] 200 　　(4) Supply Current vs. Input Voltage XC6501x501 CIN = 0.1μF (ceramic) 0.5 Ta = -40℃ 0.4 Ta = 25℃ Ta = 85℃ 0.3 16.0 Supply Current: ISS [μA] Dropout Voltage: Vdif [V] XC6501x121 0.2 0.1 0.0 12.0 8.0 Ta = -40℃ 4.0 Ta = 25℃ Ta = 85℃ 0.0 0 50 100 150 Output Current: IOUT [mA] 200 0 1 XC6501x281 6 20.0 Supply Current: ISS [μA] Supply Current: ISS [μA] 5 XC6501x501 16.0 12.0 8.0 Ta = -40℃ 4.0 Ta = 25℃ Ta = 85℃ 0.0 15.0 10.0 Ta = -40℃ 5.0 Ta = 25℃ Ta = 85℃ 0.0 0 14/25 2 3 4 Input Voltage: VIN [V] 1 2 3 4 Input Voltage: VIN [V] 5 6 0 1 2 3 4 Input Voltage: VIN [V] 5 6 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(5) Output Voltage vs. Ambient Temperature XC6501x121 XC6501x281 VIN = 2.2V CIN = 0.1μF (ceramic) 1.24 VIN = 3.8V CIN = 0.1μF (ceramic) 2.90 IOUT = 10mA Output Voltage: VOUT [V] Output Voltage: VOUT [V] IOUT = 10mA IOUT = 30mA 1.22 IOUT = 100mA 1.20 1.18 1.16 IOUT = 30mA 2.85 IOUT = 100mA 2.80 2.75 2.70 -50 -25 0 25 50 75 Ambient Temperature: Ta [℃] 100 -50 -25 0 25 50 75 Ambient Temperature: Ta [℃] 100 　　(6) Supply Current vs. Ambient Temperature XC6501x501 XC6501 VIN = 6.0V CIN = 0.1μF (ceramic) 5.10 VIN = VOUT + 1.0V 20.0 Supply Current: ISS [μA] Output Voltage: VOUT [V] IOUT = 10mA IOUT = 30mA 5.05 IOUT = 100mA 5.00 4.95 15.0 10.0 IOUT = 10mA 5.0 IOUT = 30mA IOUT = 100mA 4.90 0.0 -50 -25 0 25 50 75 Ambient Temperature: Ta [℃] 100 -50 -25 0 25 50 75 Ambient Temperature: Ta [℃] 100 　　(7) CE Threshold Voltage vs. Ambient Temperature XC6501 VIN = VOUT + 1.0V IOUT = 1mA, CIN = 0.1μF (ceramic) CE Threshold Voltage: VCE [V] 0.8 0.7 0.6 0.5 CE "H" LEVEL CE "L" LEVEL 0.4 -50 -25 0 25 50 75 Ambient Temperature: Ta [℃] 100 15/25 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(8) Rising Response Time 0.0 Output Voltage -3.0 1.0 IOUT = 10mA -6.0 IOUT = 30mA IOUT = 100mA 0.5 0.0 Output Voltage -3.0 1.0 -6.0 Output Voltage -3.0 3.0 2.0 IOUT = 10mA -6.0 IOUT = 30mA IOUT = 100mA -9.0 1.0 9.0 Input Voltage: VIN[V] 4.0 0.0 IOUT = 30mA IOUT = 100mA tr = 5μs, Ta = 25℃ VIN = 0→6.0V, CIN = 0.1μF (ceramic), Without C L 6.0 3.0 Output Voltage 0.0 -3.0 2.0 -6.0 IOUT = 30mA IOUT = 100mA XC6501x501 3.0 8.0 Output Voltage -3.0 6.0 4.0 IOUT = 10mA IOUT = 30mA IOUT = 100mA Time [50μs/div] 2.0 0.0 9.0 Input Voltage: VIN [V] 10.0 3.0 IOUT = 10mA XC6501x501 Input Voltage 6.0 4.0 Time [50μs/div] 6.0 0.0 5.0 -9.0 12.0 0.5 Input Voltage Time [50μs/div] tr = 5μs, Ta = 25℃ VIN = 0→6.0V, CIN = CL = 0.1μF (ceramic) 1.5 IOUT = 10mA -9.0 6.0 5.0 0.0 -9.0 0.0 XC6501x281 tr = 5μs, Ta = 25℃ VIN = 0→6.0V, CIN = CL = 0.1μF (ceramic) 3.0 -6.0 2.0 XC6501x281 Input Voltage 0.0 3.0 Time [50μs/div] 6.0 9.0 2.5 Input Voltage Time [50μs/div] Output Voltage: VOUT [V] Input Voltage: VIN [V] 9.0 Input Voltage: VIN [V] 1.5 6.0 3.0 tr = 5μs, Ta = 25℃ VIN = 0→6.0V, CIN = 0.1μF (ceramic), Without C L 6.0 1.0 0.0 12.0 10.0 Input Voltage 3.0 0.0 8.0 Output Voltage -3.0 6.0 4.0 IOUT = 10mA -6.0 -9.0 IOUT = 30mA IOUT = 100mA Time [50μs/div] Output Voltage: VOUT [V] 2.0 tr = 5μs, Ta = 25℃ VIN = 0→6.0V, CIN = 0.1μF (ceramic), Without C L Output Voltage: VOUT [V] 3.0 9.0 Input Voltage: VIN [V] 2.5 Input Voltage -9.0 16/25 3.0 Output Voltage: VOUT [V] 6.0 XC6501x121 Output Voltage: VOUT [V] Input Voltage: VIN [V] 9.0 tr = 5μs, Ta = 25℃ VIN = 0→6.0V, CIN = CL = 0.1μF (ceramic) 2.0 0.0 Output Voltage: VOUT [V] XC6501x121 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(9) Input Transient Response IOUT = 30mA 1.3 IOUT = 100mA 0.0 1.2 Output Voltage -1.0 1.2 Output Voltage -1.0 3.1 IOUT = 10mA 3.0 3.0 IOUT = 30mA Output Voltage IOUT = 100mA 1.0 2.9 2.8 6.0 Input Voltage: VIN [V] 3.3 3.2 0.0 Input Voltage: VIN [V] 0.0 1.1 XC6501x281 tr = tf = 5μs, Ta = 25℃ VIN = 3.8V⇔4.8V, CIN = CL = 0.1μF (ceramic) 2.7 tr = tf = 5μs, Ta = 25℃ VIN = 3.8V⇔4.8V, C IN = 0.1μF (ceramic), Without C L 5.0 3.2 4.0 3.1 IOUT = 10mA 3.0 2.0 Output Voltage IOUT = 100mA 1.0 2.7 XC6501x501 XC6501x501 5.4 Input Voltage 5.0 IOUT = 10mA IOUT = 30mA 4.0 5.3 5.2 IOUT = 100mA Output Voltage 2.0 5.1 5.0 1.0 4.9 Time [200μs/div] 7.0 2.9 2.8 Time [200μs/div] 6.0 3.0 IOUT = 30mA 0.0 5.5 3.3 Input Voltage Time [200μs/div] tr = tf = 5μs, Ta = 25℃ VIN = 5.5V⇔6.0V, CIN = CL = 0.1μF (ceramic) 1.3 IOUT = 100mA XC6501x281 4.0 3.0 IOUT = 30mA 1.0 Time [200μs/div] Input Voltage 7.0 1.4 IOUT = 10mA Time [200μs/div] 5.0 2.0 1.5 Input Voltage 2.0 Input Voltage: VIN [V] Input Voltage: VIN [V] 6.0 1.1 1.6 tr = tf = 5μs, Ta = 25℃ VIN = 5.5V⇔6.0V, C IN = 0.1μF (ceramic), Without C L 6.0 5.5 5.4 Input Voltage 5.0 IOUT = 10mA 4.0 IOUT = 30mA 5.3 5.2 IOUT = 100mA 3.0 Output Voltage: VOUT [V] 1.0 tr = tf = 5μs, Ta = 25℃ VIN = 2.2V⇔3.2V, C IN = 0.1μF (ceramic), Without C L Output Voltage: VOUT [V] 1.4 IOUT = 10mA 3.0 Input Voltage: VIN [V] 2.0 Output Voltage: VOUT [V] 1.5 Input Voltage 4.0 Output Voltage: VOUT [V] Input Voltage: VIN [V] 3.0 1.6 Output Voltage: VOUT [V] 4.0 XC6501x121 tr = tf = 5μs, Ta = 25℃ VIN = 2.2V⇔3.2V, CIN = CL = 0.1μF (ceramic) Output Voltage 2.0 5.1 5.0 1.0 Output Voltage: VOUT [V] XC6501x121 4.9 Time [200μs/div] 17/25 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(10) Load Transient Response 0.8 50 0 0.6 100 Output Current 100 Output Current 2.0 50 0 3.0 10mA tr = tf = 5μs, Ta = 25℃ IOUT = 10⇔50mA, VIN = 3.8V, CIN = 0.1μF (ceramic) CL = 0.1μF 2.8 2.6 150 2.4 2.2 100 Output Current XC6501x501 5.0 200 Output Voltage 4.8 150 4.6 100 Output Current 4.2 Time [40μs/div] 50 0 5.2 tr = tf = 5μs, Ta = 25℃ IOUT = 10⇔50mA, VIN = 6.0V, CIN = 0.1μF (ceramic) CL = 0.1μF 50 0 300 250 Without CL 5.0 200 Output Voltage 4.8 150 4.6 4.4 100 Output Current 50mA ⇔ ⇔ 50mA 0.1mA Output Voltage: VOUT [V] 250 5.4 50mA 10mA XC6501x501 Without CL 300 200 Time [40μs/div] CL = 0.1μF 0 Output Voltage 2.0 300 50 250 Without CL Time [40μs/div] tr = tf = 5μs, Ta = 25℃ IOUT = 0.1⇔50mA, VIN = 6.0V, CIN = 0.1μF (ceramic) 50mA ⇔ 50mA 0.1mA Output Voltage: VOUT [V] 150 3.2 Output Current: IOUT [mA] 200 2.4 4.4 0.8 0.4 300 250 Without CL 2.6 5.2 150 XC6501x281 tr = tf = 5μs, Ta = 25℃ IOUT = 0.1⇔50mA, VIN = 3.8V, CIN = 0.1μF (ceramic) Output Voltage 5.4 1.0 XC6501x281 2.8 2.2 200 Output Voltage Time [40μs/div] CL = 0.1μF 3.0 1.2 Time [40μs/div] ⇔ Output Voltage: VOUT [V] 50mA 0.1mA 250 Without CL ⇔ 0.6 100 Output Current CL = 0.1μF 300 10mA 4.2 Time [40μs/div] Output Current: IOUT [mA] 150 1.4 tr = tf = 5μs, Ta = 25℃ IOUT = 10⇔50mA, VIN = 2.2V, CIN = 0.1μF (ceramic) Output Current: IOUT [mA] 1.0 Output Voltage: VOUT [V] 200 Output Voltage 1.6 Output Current: IOUT [mA] 1.2 3.2 Output Voltage: VOUT [V] 250 Without CL 0.4 18/25 300 Output Current: IOUT [mA] 1.4 CL = 0.1μF ⇔ Output Voltage: VOUT [V] 1.6 XC6501x121 tr = tf = 5μs, Ta = 25℃ IOUT = 0.1⇔50mA, VIN = 2.2V, CIN = 0.1μF (ceramic) 50 0 Output Current: IOUT [mA] XC6501x121 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(11) CE Rising Respose Time 0.0 Output Voltage -1.0 1.0 IOUT = 10mA -2.0 IOUT = 30mA IOUT = 100mA 0.5 0.0 Output Voltage -1.0 1.0 -2.0 Output Voltage -2.0 3.0 2.0 IOUT = 10mA -4.0 IOUT = 30mA IOUT = 100mA -6.0 1.0 6.0 Input Voltage: VCE [V] 4.0 0.0 IOUT = 30mA IOUT = 100mA VIN = 3.8V, tr = 5μs, Ta = 25℃ VCE = 0→VIN, CIN = 0.1μF (ceramic), Without C L 4.0 2.0 Output Voltage 0.0 -2.0 2.0 -4.0 IOUT = 30mA IOUT = 100mA XC6501x501 3.0 8.0 Output Voltage -3.0 6.0 4.0 IOUT = 10mA IOUT = 30mA IOUT = 100mA Time [40μs/div] 2.0 0.0 9.0 Input Voltage: VCE [V] 10.0 3.0 IOUT = 10mA XC6501x501 CE Input Voltage 6.0 4.0 Time [40μs/div] 6.0 0.0 5.0 -6.0 12.0 0.5 CE Input Voltage Time [40μs/div] VIN = 2.2V, tr = 5μs, Ta = 25℃ VCE = 0→VIN, CIN = CL = 0.1μF (ceramic) 1.5 IOUT = 10mA -3.0 6.0 5.0 0.0 -9.0 0.0 XC6501x281 VIN = 2.2V, tr = 5μs, Ta = 25℃ VCE = 0→VIN, CIN = CL = 0.1μF (ceramic) 2.0 -6.0 2.0 XC6501x281 CE Input Voltage 0.0 1.0 Time [40μs/div] 4.0 9.0 2.5 CE Input Voltage Time [40μs/div] Output Voltage: VOUT [V] 6.0 Input Voltage: VCE [V] 1.5 2.0 3.0 VIN = 6.0V, tr = 5μs, Ta = 25℃ VCE = 0→VIN, CIN = 0.1μF (ceramic), Without C L 6.0 1.0 0.0 12.0 10.0 CE Input Voltage 3.0 0.0 8.0 Output Voltage -3.0 6.0 4.0 IOUT = 10mA -6.0 -9.0 IOUT = 30mA IOUT = 100mA Output Voltage: VOUT [V] 2.0 VIN = 2.2V, tr = 5μs, Ta = 25℃ VCE = 0→VIN, CIN = 0.1μF (ceramic), Without C L Output Voltage: VOUT [V] 1.0 3.0 Input Voltage: VCE [V] 2.5 CE Input Voltage -3.0 Input Voltage: VCE [V] 3.0 Output Voltage: VOUT [V] 2.0 XC6501x121 Output Voltage: VOUT [V] Input Voltage: VCE [V] 3.0 VIN = 2.2V, tr = 5μs, Ta = 25℃ VCE = 0→VIN, CIN = CL = 0.1μF (ceramic) 2.0 Output Voltage: VOUT [V] XC6501x121 0.0 Time [40μs/div] 19/25 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (12) Ripple Ripple Rejection Rejection Rate 　　(12) Rate 100 XC6501x121 Ta = 25℃ VIN = 2.2VDC+0.5Vp-pAC, CL = 0.1μF (ceramic) 80 60 40 IOUT = 0.1mA IOUT = 10mA 20 IOUT = 30mA 0 0.01 IOUT = 100mA 0.1 1 10 Ripple Frequency: f [kHz] 100 Ripple Rejection Rate: PSRR [dB] Ripple Rejection Rate: PSRR [dB] XC6501x121 100 80 60 40 IOUT = 0.1mA IOUT = 10mA 20 IOUT = 30mA 0 0.01 80 60 40 IOUT = 0.1mA IOUT = 10mA 20 IOUT = 30mA IOUT = 100mA 0 0.01 0.1 1 10 Ripple Frequency: f [kHz] 100 100 60 IOUT = 0.1mA IOUT = 10mA IOUT = 30mA IOUT = 100mA 40 20 20/25 0 0.01 100 Ta = 25℃ VIN = 3.8VDC+0.5Vp-pAC, Without CL 60 40 IOUT = 0.1mA IOUT = 10mA 20 IOUT = 30mA IOUT = 100mA 0 0.01 0.1 1 10 Ripple Frequency: f [kHz] 100 XC6501x501 Ta = 25℃ VIN = 5.75VDC+0.5Vp-pAC, CL = 0.1μF (ceramic) 0.1 1 10 Ripple Frequency: f [kHz] 100 Ripple Rejection Rate: PSRR [dB] Ripple Rejection Rate: PSRR [dB] 80 0.1 1 10 Ripple Frequency: f [kHz] 80 XC6501x501 100 IOUT = 100mA XC6501x281 Ta = 25℃ VIN = 3.8VDC+0.5Vp-pAC, CL = 0.1μF (ceramic) Ripple Rejection Rate: PSRR [dB] Ripple Rejection Rate: PSRR [dB] XC6501x281 100 Ta = 25℃ VIN = 2.2VDC+0.5Vp-pAC, Without CL 100 80 60 Ta = 25℃ VIN = 5.75VDC+0.5Vp-pAC, Without CL IOUT = 0.1mA IOUT = 10mA IOUT = 30mA IOUT = 100mA 40 20 0 0.01 0.1 1 10 Ripple Frequency: f [kHz] 100 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (13) Output Noise Density XC6501x181 VIN=2.8, Ta=25℃ CIN=CL=0.1μF(ceramic) VIN=2.2V, Ta=25℃ CIN=CL=0.1μF(ceramic) 100 Output Noise Density : [μV/√Hz] Output Noise Density : [μV/√Hz] XC6501x121 Frequency-Range ： 0.1～100kHz Output Noise ： 83.42μVrms 10 IOUT=30mA 1 0.1 0.01 0.1 1 10 Frequency : f [kHz] 100 100 Frequency-Range ： 0.1～100kHz Output Noise ： 90.90μVrms 10 IOUT=30mA 1 0.1 0.01 0.1 1 10 Frequency : f [kHz] 100 Output Noise Density : [μV/√Hz] XC6501x331 VIN=5.0V, Ta=25℃ CIN=CL=0.1μF(ceramic) 100 Frequency-Range ： 0.1～100kHz Output Noise ： 142.92μVrms 10 IOUT=30mA 1 0.1 0.01 0.1 1 10 Frequency : f [kHz] 100 21/25 XC6501 Series ■PACKAGING INFORMATION For the latest package information go to, www.torexsemi.com/technical-support/packages PACKAGE OUTLINE / LAND PATTERN THERMAL CHARACTERISTICS SSOT-24 SSOT-24 PKG SSOT-24 Power Dissipation SOT-25 SOT-25 PKG SOT-25 Power Dissipation USP-3 USP-3 PKG USP-3 Power Dissipation USP-4 USP-4 PKG USP-4 Power Dissipation USPN-4 USPN-4 PKG USPN-4 Power Dissipation WLP-4-01 WLP-4-01 PKG WLP-4-01 Power Dissipation 22/25 XC6501 Series ■MARKING RULE SOT-25 USPN-4 USP-3 USP-4 3 4 ③ ④ ⑤ 2 4 1 3 2 ④ ⑤ ② ① ② ③ ① ④ ⑤ 1 ① ② ③ 5 1 2 3 1 2 ③ ① ② 4 ④ ⑤ 3 3 ■SOT-25/USP-4/USP-3/USPN-4 ① represents product series MARK PRODUCT SERIES A XC6501****** ② represents type of regulator MARK OUTPUT VOLTAGE 0.1V INCREMENTS OUTPUT VOLTAGE 0.05V INCREMENTS PRODUCT SERIES VOLTAGE= 1.2～3.0V VOLTAGE= 3.1～5.0V VOLTAGE= 1.25～3.05V VOLTAGE= 3.15～4.95V U A E M V B F N XC6501B***** X C H R XC6501C***** Y D K S XC6501D***** Z P L T XC6501P***** XC6501A***** ③ represents type of output voltage range MARK OUTPUT VOLTAGE (V) MARK OUTPUT VOLTAGE (V) 0 - 3.10 - 3.15 F 1.60 4.60 1.65 4.65 1 - 3.20 - 3.25 H 1.70 4.70 1.75 4.75 2 - 3.30 - 3.35 K 1.80 4.80 1.85 4.85 3 - 3.40 - 3.45 L 1.90 4.90 1.95 4.95 4 - 3.50 - 3.55 M 2.00 5.00 2.05 - 5 - 3.60 - 3.65 N 2.10 - 2.15 - 6 - 3.70 - 3.75 P 2.20 - 2.25 - 7 - 3.80 - 3.85 R 2.30 - 2.35 - 8 - 3.90 - 3.95 S 2.40 - 2.45 - 9 - 4.00 - 4.05 T 2.50 - 2.55 - A - 4.10 - 4.15 U 2.60 - 2.65 - B 1.20 4.20 1.25 4.25 V 2.70 - 2.75 - C 1.30 4.30 1.35 4.35 X 2.80 - 2.85 - D 1.40 4.40 1.45 4.45 Y 2.90 - 2.95 - E 1.50 4.50 1.55 4.55 Z 3.00 - 3.05 - ④,⑤ represents production lot number 01 to 09, 0A to 0Z, 11 to 9Z, A1 to A9, AA to Z9,ZA to ZZ repeated. G，I，J，O，Q，W excepted. *No character inversion used. 23/25 XC6501 Series ■MARKING RULE (Continued) SSOT-24 SSOT24 WLP-4-01 4 ② ④ ① ③ 3 4 1 1 ① ② ③ ④ 3 2 2 ■SSOT-24/WLP-4-01 ① represents type of regulator MARK VOLTAGE= 1.2～2.15V VOLTAGE= 2.2～3.15V VOLTAGE= 3.2～4.15V VOLTAGE= 4.2～5.0V PRODUCT SERIES 5 6 7 8 XC6501A***** D E F H XC6501B***** R S T 0 XC6501C***** V X Y Z XC6501D***** ② represents type of output voltage range MARK OUTPUT VOLTAGE (V) MARK OUTPUT VOLTAGE (V) A 1.20 2.20 3.20 4.20 N 1.70 2.70 3.70 4.70 B 1.25 2.25 3.25 4.25 P 1.75 2.75 3.75 4.75 C 1.30 2.30 3.30 4.30 R 1.80 2.80 3.80 4.80 D 1.35 2.35 3.35 4.35 S 1.85 2.85 3.85 4.85 E 1.40 2.40 3.40 4.40 T 1.90 2.90 3.90 4.90 F 1.45 2.45 3.45 4.45 U 1.95 2.95 3.95 4.95 H 1.50 2.50 3.50 4.50 V 2.00 3.00 4.00 5.00 K 1.55 2.55 3.55 4.55 X 2.05 3.05 4.05 - L 1.60 2.60 3.60 4.60 Y 2.10 3.10 4.10 - M 1.65 2.65 3.65 4.65 Z 2.15 3.15 4.15 - ③,④ represents production lot number 01 to 09, 0A to 0Z, 11 to 9Z, A1 to A9, AA to Z9,ZA to ZZ repeated. G，I，J，O，Q，W excepted. *No character inversion used. 24/25 XC6501 Series 1. The product and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this datasheet is up to date. 2. The information in this datasheet is intended to illustrate the operation and characteristics of our products. We neither make warranties or representations with respect to the accuracy or completeness of the information contained in this datasheet nor grant any license to any intellectual property rights of ours or any third party concerning with the information in this datasheet. 3. Applicable export control laws and regulations should be complied and the procedures required by such laws and regulations should also be followed, when the product or any information contained in this datasheet is exported. 4. The product is neither intended nor warranted for use in equipment of systems which require extremely high levels of quality and/or reliability and/or a malfunction or failure which may cause loss of human life, bodily injury, serious property damage including but not limited to devices or equipment used in 1) nuclear facilities, 2) aerospace industry, 3) medical facilities, 4) automobile industry and other transportation industry and 5) safety devices and safety equipment to control combustions and explosions. Do not use the product for the above use unless agreed by us in writing in advance. 5. Although we make continuous efforts to improve the quality and reliability of our products; nevertheless Semiconductors are likely to fail with a certain probability. So in order to prevent personal injury and/or property damage resulting from such failure, customers are required to incorporate adequate safety measures in their designs, such as system fail safes, redundancy and fire prevention features. 6. Our products are not designed to be Radiation-resistant. 7. Please use the product listed in this datasheet within the specified ranges. 8. We assume no responsibility for damage or loss due to abnormal use. 9. All rights reserved. No part of this datasheet may be copied or reproduced unless agreed by Torex Semiconductor Ltd in writing in advance. TOREX SEMICONDUCTOR LTD. 25/25