XC6501P261GL

XC6501 ■GENERAL DESCRIPTION ETR0337-003 Output Capacitor-Less, Low Power Consumption, High Speed LDO Regulator The XC6501 series is a 6.0V high speed, low noise CMOS LDO regulator that can provide stable output voltages within a range of 1.2V to 5.0V (0.05V increments) even without a load capacitor CL. This is possible because phase compensation is carried out internally unlike other LDOs where it is done externally. The series consists of a reference voltage source, driver transistor, error amplifier, current limit circuit, and phase compensation circuit. The CE function enables the circuit to be put into stand-by mode by inputting a low level signal to the CE pin thereby reducing current consumption from an already low 13μA (in operation) to less than 0.1μA. In the stand-by mode, if a CL cap is used, the electric charge stored at CL can be discharged via the internal auto-discharge switch and as a result, the VOUT pin quickly returns to the VSS level. The current limit fold-back circuit operates as a short circuit protection and a current limiter function for the output pin. ■APPLICATIONS ●Mobile phones （RF, Digital cash, I/O etc.） ●Portable games ●Camera modules ●Wireless LAN modules ●LCD modules ●Bluetooth ●Digital-TV tuners ■FEATURES Operating Voltage Range Output Voltage Range Dropout Voltage Low Power Supply Stand-by Current Ripple Rejection Protection Circuits Output capacitor is not required CL High Speed Auto Discharge Packages USP-3, USP-4 SSOT-24, SOT-25 : : : : : : : : : 1.4～6.0V 2.0～5.0V（Accuracy:±1%） 1.2～1.95V（Accuracy:±0.02V） 150mV＠IOUT=100mA, VOUT=2.8V 13μA＠VOUT=2.8V Less than 0.1μA 50dB＠f=1kHz,VOUT=2.8V Current limit （300mA, TYP.） Short circuit protection Internal phase compensation ■TYPICAL APPLICATION CIRCUIT ■TYPICAL PERFORMANCE CHARACTERISTICS XC6501 XC6501 Series Ta=25℃,tr=tf=5μs C IN=0.1μF (ceramic) 3.2 (V) 3.0 2.8 2.6 2.4 2.2 2.0 Time (40μs/div) Output Current 300 Output Current: I OUT (mA) Without CL CL無し CL =1.0μF 250 200 150 100 50 0 Output Voltage: V OUT 1/21 XC6501 Series ■PIN CONFIGURATION *The heat dissipation pad of the USP-4 package is recommended to solder as the recommended mount pattern and metal mask pattern for mounting strength. The mount pattern should be electrically opened or connected to the VSS (No.2) pin. ■PIN ASSIGNMENT PIN NUMBER USP-3 1 2 3 USP-4 4 1 2 3 SSOT-24 4 3 2 1 SOT-25 1 5 2 3 4 PIN NAME VIN VOUT VSS CE NC FUNCTION Power Supply Output Ground ON/OFFControl No Connection ■PRODUCT CLASSIFICATION ●Ordering Information XC6501①②③④⑤⑥ DESIGNATOR DESCRIPTION SYMBOL A B C D P 12～50 1 ④ Output Voltage Accuracy A H G N M R L DESCRIPTION : CE High Active, Without CE Pull-down, Without CL discharge : CE High Active, Without CE Pull-down, With CL discharge : CE High Active, With CE Pull-down, Without CL discharge : CE High Active, With CE Pull-down, With CL discharge : 3 pin, without CE pin (USP-3) : ex.)28V → ②=2, ③=8 : 0.1V increments Accuracy 1.2V～1.9V (±0.02V), 2.0～5.0V (±1%) ex.)1.80V → ②=1, ③=8, ④=1 : 0.05V increments Accuracy 1.25V～1.95V (±0.02V), 2.05～4.95V (±1%) ex.)1.85V → ②=1, ③=8, ④=A : USP-3 (Only XC6501P) : USP-4 : SSOT-24 : SOT-25 : Embossed tape, standard feed : Embossed tape, reverse feed ① Regulator Type ②③ Output Voltage ⑤ Packages ⑥ Device Orientation 2/21 XC6501 Series ■BLOCK DIAGRAMS VIN CFB Current Limit + Error Amp ON/OFF Control each circuit Voltage Reference R1 Current Limit + Error Amp ON/OFF Control each circuit Voltage Reference Rdischg R2 VOUT VIN CFB R1 VOUT R2 CE CE VSS /CE VSS XC6501A Series XC6501B Series VIN CFB Current Limit + Error Amp CE ON/OFF Control Voltage Reference R1 VOUT VIN CFB Current Limit + Error Amp Rdischg R2 R1 VOUT R2 CE ON/OFF Control Voltage Reference /CE each circuit VSS each circuit VSS XC6501C Series XC6501D Series VIN CFB Current Limit + Error Amp Voltage Reference R1 VOUT R2 VSS *Diodes inside the circuit are an ESD protection diode and a parasitic diode. ＊図のダイオードは、静電保護用のダイオードと寄生ダイオードです。 XC6501P Series ■ABSOLUTE MAXIMUM RATINGS PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage USP-3 USP-4 Power Dissipation SSOT-24 SOT-25 SYMBOL VIN IOUT VOUT VCE RATINGS VSS-0.3～+6.5 400 (*1) VSS-0.3～VIN+0.3 VSS-0.3～+6.5 120 120 150 250 600 （PCB mounted）(*2) -40～+85 -55～+125 UNITS V mA V V mW Pd Operating Temperature Range Topr ℃ Storage Temperature Range Tstg ℃ *1: Pd＞（VIN-VOUT）×IOUT *2: The power dissipation figure shown is PCB mounted and is for reference only. Please refer to page 20 for details. 3/21 XC6501 Series ■ELECTRICAL CHARACTERISTICS ●XC6501 Series Ta=25℃ PARAMETER SYMBOL CONDITIONS 2.0V＞VOUT（T）(*3) VCE=VIN, IOUT=10mA 2.0V≦VOUT（T） VCE=VIN, IOUT=10mA VCE=VIN VCE=VIN, 0.1mA≦IOUT≦100mA VCE=VIN , IOUT=100mA VIN=VCE=6.0V, IOUT=0ｍA VIN=6.0V, VCE=VSS VOUT(T)+0.5V≦VIN≦6.0V, VCE=VIN, IOUT=30mA MIN. -0.02 (*4) TYP. MAX. +0.02 (*4) UNITS CIRCUIT Output Voltage VOUT(E) (*2) ×0.99 (*4) VOUT（T） ×1.01 (*4) V ① Maximum Output Current Load Regulation Dropout Voltage (*5) Supply Current Stand-by Current Line Regulation Input Voltage Output Voltage Temperature Characteristics IOUTMAX ΔVOUT Vdif IDD Istby ΔVOUT ΔVIN・VOUT VIN ΔVOUT ΔTa・VOUT 200 - 1.4 15 E-1 E-2 0.01 0.10 ±100 45 0.1 0.20 6.0 - mA mV mV μA μA %/V V ppm/℃ ① ① ① ② ② ① ① ① VCE=VIN, IOUT=30mA -40℃≦Ta≦85℃ VOUT(T)≦4.75V VIN=｛VOUT(T)+1.0｝VDC+0.5Vp-pAC VCE=VIN, IOUT=30mA, f=1kHz VOUT(T)≧4.80V VIN=5.75VDC+0.5Vp-pAC VCE=VIN, IOUT=30mA, f=1kHz VCE=VIN VCE=VIN, VOUT is short-circuited at the VSS level - Ripple Rejection Rate PSRR - 50 - dB ③ Current Limit Short Circuit Current CE High Level Voltage CE Low Level Voltage CE High Level Current CE Low Level Current CL Auto-Discharge Resistance (*8) ILIM ISHORT VCEH VCEL ICEH ICEL RDCHG 210 1.0 VSS 300 25 6.0 250 400 6.0 0.25 0.1 10 0.1 300 480 mA mA V V μA μA Ω Ω ① ① ① ① ① ① ① VIN=VCE=6.0V VCE=VSS XC6501A/B/P XC6501C/D -0.1 3.5 -0.1 - VIN=6.0V, VOUT=1.2V, VCE=VSS VIN=6.0V, VOUT=5.0V, VCE=VSS Notes: (*3) *1: Unless otherwise stated regarding input voltage conditions, VIN=VOUT(T) +1.0V. *2: VOUT(E): An actual output voltage when an amply stabilized IOUT (VOUT(T)+1.0V) is input.. *3: VOUT(T): Nominal output voltage value *4: VOUT(E): Effective output voltage value *5: Vdif={VIN1 – VOUT1 } *6: VOUT1: A voltage equal to 98% of the output voltage when an amply stabilized IOUT (VOUT(T)+1.0V) is input. *7: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased. *8: This function is built in the XC6501B/D series only. The XC6501A/C series discharges by resistors R1+ R2 only as shown in the block diagrams. (*7) (*6) 4/21 XC6501 Series ■ELECTRICAL CHARACTERISTICS (Continued) ●Voltage Chart E-0 OUTPUT VOLTAGE (V) VOUT(E) MIN. 1.1800 1.2300 1.2800 1.3300 1.3800 1.4300 1.4800 1.5300 1.5800 1.6300 1.6800 1.7300 1.7800 1.8300 1.8800 1.9300 1.9800 2.0295 2.0790 2.1285 2.1780 2.2275 2.2770 2.3265 2.3760 2.4255 2.4750 2.5245 2.5740 2.6235 2.6730 2.7225 2.7720 2.8215 2.8710 2.9205 MAX. 1.2200 1.2700 1.3200 1.3700 1.4200 1.4700 1.5200 1.5700 1.6200 1.6700 1.7200 1.7700 1.8200 1.8700 1.9200 1.9700 2.0200 2.0705 2.1210 2.1715 2.2220 2.2725 2.3230 2.3735 2.4240 2.4745 2.5250 2.5755 2.6260 2.6765 2.7270 2.7775 2.8280 2.8785 2.9290 2.9795 TYP. E-1 DROPOUT VOLTAGE (mV) Vdif MAX. TYP. E-2 SUPPLY CURRENT (μA) ISS MAX. NOMINAL VOLTAGE (V) VOUT(T) 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 1.60 1.65 1.70 1.75 1.80 1.85 1.90 1.95 2.00 2.05 2.10 2.15 2.20 2.25 2.30 2.35 2.40 2.45 2.50 2.55 2.60 2.65 2.70 2.75 2.80 2.85 2.90 2.95 440 690 300 610 11 17 260 530 230 470 18 200 430 12 190 410 19 210 380 13 20 150 360 5/21 XC6501 Series ■ELECTRICAL CHARACTERISTICS (Continued) ●Voltage Table (continued) E-0 OUTPUT VOLTAGE (V) VOUT(E) MIN. 2.9700 3.0195 3.0690 3.1185 3.1680 3.2175 3.2670 3.3165 3.3660 3.4155 3.4650 3.5145 3.5640 3.6135 3.6630 3.7125 3.7620 3.8115 3.8610 3.9105 3.9600 4.0095 4.0590 4.1085 4.1580 4.2075 4.2570 4.3065 4.3560 4.4055 4.4550 4.5045 4.5540 4.6035 4.6530 4.7025 4.7520 4.8015 4.8510 4.9005 4.9500 MAX. 3.0300 3.0805 3.1310 3.1815 3.2320 3.2825 3.3330 3.3835 3.4340 3.4845 3.5350 3.5855 3.6360 3.6865 3.7370 3.7875 3.8380 3.8885 3.9390 3.9895 4.0400 4.0905 4.1410 4.1915 4.2420 4.2925 4.3430 4.3935 4.4440 4.4945 4.5450 4.5955 4.6460 4.6965 4.7470 4.7975 4.8480 4.8985 4.9490 4.9995 5.0500 TYP. E-1 DROPOUT VOLTAGE (mV) Vdif MAX. TYP. E-2 SUPPLY CURRENT (μA) ISS MAX. 20 150 360 NOMINAL VOLTAGE (V) VOUT(T) 3.00 3.05 3.10 3.15 3.20 3.25 3.30 3.35 3.40 3.45 3.50 3.55 3.60 3.65 3.70 3.75 3.80 3.85 3.90 3.95 4.00 4.05 4.10 4.15 4.20 4.25 4.30 4.35 4.40 4.45 4.50 4.55 4.60 4.65 4.70 4.75 4.80 4.85 4.90 4.95 5.00 14 140 350 21 130 340 15 22 120 330 16 23 6/21 XC6501 Series ■OPERATIONAL EXPLANATION The voltage divided by resistors R1 & R2 is compared with the internal reference voltage by the error amplifier. The P-channel MOSFET which is connected to the VOUT pin is then driven by the subsequent output signal. The output voltage at the VOUT pin is controlled & stabilized by a system of negative feedback. The current limit circuit and short protect circuit operate in relation to the level of output current. Further, the IC's internal circuitry can be shutdown via the CE pin's signal. The XC6501B/D series can discharge the electric charge in the output capacitor CL, when a low signal to the CE pin, which enables a whole IC circuit turn off, is inputted via the N-channel transistor located between the VOUT pin and the VSS pin as shown in the BLOCK DIAGRAM. The CL auto-discharge resistance value is set at 400Ω(VOUT=5.0V @ VIN=6.0V at typical). The discharge time of the output capacitor CL is set by the CL auto-discharge resistance R and the output capacitor CL. By setting time constant of a CL auto-discharge resistance value Rdischg and an output capacitor value CL as τ (τ=C x Rdischg), the output voltage after discharge via the N-channel transistor is calculated by the following formulas. V = VOUT(E) x e –t/τ, or t=τx In (VOUT(E) / V ) where V : Output voltage after discharge, VOUT(E) : Output voltage, t : Discharge time, τ: CL auto-discharge resistance Rdischg x Output capacitor CL The XC6501 series’ fold-back circuit operates as an output current limiter and a short protection of the output pin. When the load current reaches the current limit level, the fixed current limiter circuit operates and output voltage drops. When the output voltage is shorted to the VSS, its current flow reached and minimized to about 25mA. The IC's internal circuitry can be shutdown via the signal from the CE pin with the XC6501 series. In shutdown mode output at the VOUT pin will be pulled down to the VSS level via R1 & R2. However, as for the XC6501B/D series, the CL auto-discharge resistor is connected in parallel to R1 and R2 while the power supply is applied to the VIN pin. Therefore, time until the VOUT pin reaches the VSS level becomes short. The output voltage becomes unstable, when the CE pin is open. If this IC is used with the correct output voltage for the CE pin, the logic is fixed and the IC will operate normally. However, supply current may increase as a result of through current in the IC's internal circuitry when medium voltage is input. ■NOTES ON USE 1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be exceeded. 2. This IC achieves stable operation without an output capacitor CL by internal phase compensation. However, wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output current. Please wire the input capacitor CIN and the output capacitor CL as close to the IC as possible. 7/21 XC6501 Series ■TEST CIRCUITS ● 測定回路① ●Circuit ① CIN=0.1μF (ceramic) V A V CE VIN VOUT VSS V IOUT A ●測定回路② ●Circuit ② A VIN V CE VSS VOUT ●Circuit ③ ●測定回路③ VIN V CE VSS VOUT V IOUT A 8/21 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS *CE Voltage condition: Unless otherwise stated, VCE =VIN 　　(1) Output Voltage vs. Output Current XC6501x121 1.5 Output Voltage: VOUT [V] 1.2 0.9 0.6 Ta = -40℃ VIN = 2.2V CIN = 0.1μF (ceramic) XC6501x121 1.5 Output Voltage: VOUT [V] 1.2 0.9 0.6 VIN = 1.5V Ta = 25℃ CIN = 0.1μF (ceramic) 0.3 0.0 0 50 Ta = 25℃ Ta = 85℃ 0.3 0.0 VIN = 1.7V VIN = 2.2V 100 150 200 250 300 350 400 Output Current: IOUT [mA] 0 50 100 150 200 250 300 350 400 Output Current: IOUT [mA] XC6501x281 3.0 Output Voltage: VOUT [V] 2.5 2.0 1.5 1.0 0.5 0.0 0 50 100 150 200 250 300 350 400 Output Current: IOUT [mA] Ta = -40℃ Ta = 25℃ Ta = 85℃ VIN = 3.8V CIN = 0.1μF (ceramic) XC6501x281 3.0 Output Voltage: VOUT [V] 2.5 2.0 1.5 1.0 0.5 0.0 0 50 VIN = 3.1V VIN = 3.3V VIN = 3.8V Ta = 25℃ CIN = 0.1μF (ceramic) 100 150 200 250 300 350 400 Output Current: IOUT [mA] XC6501x501 6.0 Output Voltage: VOUT [V] 5.0 4.0 3.0 2.0 1.0 0.0 0 50 100 150 200 250 300 350 400 Output Current: IOUT [mA] Ta = -40℃ Ta = 25℃ Ta = 85℃ VIN = 6.0V CIN = 0.1μF (ceramic) XC6501x501 6.0 Output Voltage: VOUT [V] 5.0 4.0 3.0 2.0 1.0 0.0 0 50 100 150 200 250 300 350 400 Output Current: IOUT [mA] VIN = 5.3V VIN = 5.5V VIN = 6.0V Ta = 25℃ CIN = 0.1μF (ceramic) 9/21 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(2) Output Voltage vs. Input Voltage XC6501x121 1.4 Output Voltage: VOUT [V] 1.2 1.0 0.8 IOUT = 10mA Ta = 25℃ CIN = 0.1μF (ceramic) XC6501x121 1.26 Output Voltage: VOUT [V] 1.24 1.22 1.20 1.18 1.16 1.14 IOUT = 10mA IOUT = 30mA IOUT = 100mA Ta = 25℃ CIN = 0.1μF (ceramic) 0.6 0.4 0.5 IOUT = 30mA IOUT = 100mA 1.0 1.5 2.0 Input Voltage: VIN [V] 2.5 2.0 3.0 4.0 5.0 Input Voltage: VIN [V] 6.0 XC6501x281 3.0 Output Voltage: VOUT [V] 2.8 2.6 2.4 IOUT = 10mA Ta = 25℃ CIN = 0.1μF (ceramic) XC6501x281 2.86 Output Voltage: VOUT [V] 2.84 2.82 2.80 2.78 2.76 2.74 IOUT = 10mA IOUT = 30mA IOUT = 100mA Ta = 25℃ CIN = 0.1μF (ceramic) 2.2 2.0 2.0 IOUT = 30mA IOUT = 100mA 2.5 3.0 3.5 Input Voltage: VIN [V] 4.0 3.2 3.9 4.6 5.3 Input Voltage: VIN [V] 6.0 XC6501x501 5.2 Output Voltage: VOUT [V] 5.0 4.8 4.6 IOUT = 10mA Ta = 25℃ CIN = 0.1μF (ceramic) XC6501x501 5.06 Output Voltage: VOUT [V] 5.04 5.02 5.00 4.98 4.96 4.94 IOUT = 10mA IOUT = 30mA IOUT = 100mA Ta = 25℃ CIN = 0.1μF (ceramic) 4.4 4.2 4.0 IOUT = 30mA IOUT = 100mA 4.5 5.0 5.5 Input Voltage: VIN [V] 6.0 5.2 5.4 5.6 5.8 Input Voltage: VIN [V] 6.0 10/21 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(3) Dropout Voltage vs. Output Current XC6501x121 1.0 Dropout Voltage: Vdif [V] Ta = -40℃ CIN = 0.1μF (ceramic) XC6501x281 0.5 Dropout Voltage: Vdif [V] Ta = -40℃ CIN = 0.1μF (ceramic) 0.8 0.6 0.4 0.2 Ta = 25℃ Ta = 85℃ 0.4 0.3 0.2 0.1 0.0 Ta = 25℃ Ta = 85℃ ※Below the minimum operating voltage 0.0 0 50 100 150 Output Current: IOUT [mA] 200 0 50 100 150 Output Current: IOUT [mA] 200 　　(4) Supply Current vs. Input Voltage XC6501x501 0.5 Dropout Voltage: Vdif [V] Ta = -40℃ CIN = 0.1μF (ceramic) XC6501x121 16.0 Supply Current: ISS [μA] 12.0 8.0 Ta = -40℃ 0.4 0.3 0.2 0.1 0.0 0 Ta = 25℃ Ta = 85℃ 4.0 0.0 Ta = 25℃ Ta = 85℃ 50 100 150 Output Current: IOUT [mA] 200 0 1 2 3 4 Input Voltage: VIN [V] 5 6 XC6501x281 16.0 Supply Current: ISS [μA] 12.0 8.0 Ta = -40℃ XC6501x501 20.0 Supply Current: ISS [μA] 15.0 10.0 Ta = -40℃ 4.0 0.0 0 1 2 3 4 Input Voltage: VIN [V] Ta = 25℃ Ta = 85℃ 5.0 0.0 Ta = 25℃ Ta = 85℃ 5 6 0 1 2 3 4 Input Voltage: VIN [V] 5 6 11/21 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(5) Output Voltage vs. Ambient Temperature XC6501x121 1.24 IOUT = 10mA VIN = 2.2V CIN = 0.1μF (ceramic) XC6501x281 2.90 IOUT = 10mA VIN = 3.8V CIN = 0.1μF (ceramic) Output Voltage: VOUT [V] IOUT = 30mA Output Voltage: VOUT [V] IOUT = 30mA 1.22 1.20 1.18 1.16 -50 IOUT = 100mA 2.85 2.80 2.75 2.70 IOUT = 100mA -25 0 25 50 75 Ambient Temperature: Ta [℃] 100 -50 -25 0 25 50 75 Ambient Temperature: Ta [℃] 100 　　(6) Supply Current vs. Ambient Temperature XC6501x501 5.10 IOUT = 10mA VIN = 6.0V CIN = 0.1μF (ceramic) XC6501 20.0 Supply Current: ISS [μA] 15.0 10.0 5.0 0.0 IOUT = 10mA IOUT = 30mA IOUT = 100mA VIN = VOUT + 1.0V Output Voltage: VOUT [V] IOUT = 30mA 5.05 5.00 4.95 4.90 -50 IOUT = 100mA -25 0 25 50 75 Ambient Temperature: Ta [℃] 100 -50 -25 0 25 50 75 Ambient Temperature: Ta [℃] 100 　　(7) CE Threshold Voltage vs. Ambient Temperature XC6501 0.8 0.7 0.6 0.5 0.4 -50 -25 0 25 50 75 Ambient Temperature: Ta [℃] 100 VIN = VOUT + 1.0V IOUT = 1mA, CIN = 0.1μF (ceramic) CE Threshold Voltage: VCE [V] CE "H" LEVEL CE "L" LEVEL 12/21 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(8) Rising Response Time XC6501x121 9.0 Input Voltage: VIN [V] 6.0 Input Voltage 3.0 0.0 -3.0 IOUT = 10mA tr = 5μs, Ta = 25℃ VIN = 0→6.0V, CIN = CL = 0.1μF (ceramic) XC6501x121 3.0 Output Voltage: VOUT [V] Input Voltage: VIN [V] 2.5 2.0 9.0 6.0 Input Voltage 3.0 0.0 -3.0 IOUT = 10mA tr = 5μs, Ta = 25℃ VIN = 0→6.0V, CIN = 0.1μF (ceramic), Without CL 3.0 2.5 2.0 Output Voltage: VOUT [V] Output Voltage: VOUT [V] Output Voltage: VOUT [V] Output Voltage 1.5 1.0 Output Voltage 1.5 1.0 -6.0 -9.0 IOUT = 30mA IOUT = 100mA 0.5 0.0 -6.0 -9.0 IOUT = 30mA IOUT = 100mA 0.5 0.0 Time [50μs/div] Time [50μs/div] XC6501x281 9.0 Input Voltage: VIN [V] 6.0 Input Voltage 3.0 0.0 -3.0 IOUT = 10mA tr = 5μs, Ta = 25℃ VIN = 0→6.0V, CIN = CL = 0.1μF (ceramic) XC6501x281 6.0 Input Voltage: VIN[V] 5.0 4.0 Output Voltage: VOUT [V] 9.0 6.0 Input Voltage 3.0 0.0 -3.0 IOUT = 10mA tr = 5μs, Ta = 25℃ VIN = 0→6.0V, CIN = 0.1μF (ceramic), Without CL 6.0 5.0 4.0 Output Voltage 3.0 2.0 Output Voltage 3.0 2.0 -6.0 -9.0 IOUT = 30mA IOUT = 100mA 1.0 0.0 -6.0 -9.0 IOUT = 30mA IOUT = 100mA 1.0 0.0 Time [50μs/div] Time [50μs/div] XC6501x501 9.0 Input Voltage: VIN [V] 6.0 Input Voltage 3.0 0.0 -3.0 IOUT = 10mA tr = 5μs, Ta = 25℃ VIN = 0→6.0V, CIN = CL = 0.1μF (ceramic) XC6501x501 12.0 Input Voltage: VIN [V] 10.0 8.0 Output Voltage: VOUT [V] 9.0 6.0 Input Voltage 3.0 0.0 -3.0 IOUT = 10mA tr = 5μs, Ta = 25℃ VIN = 0→6.0V, CIN = 0.1μF (ceramic), Without CL 12.0 10.0 8.0 Output Voltage 6.0 4.0 Output Voltage 6.0 4.0 -6.0 -9.0 IOUT = 30mA IOUT = 100mA 2.0 0.0 -6.0 -9.0 IOUT = 30mA IOUT = 100mA 2.0 0.0 Time [50μs/div] Time [50μs/div] 13/21 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(9) Input Transient Response XC6501x121 4.0 Input Voltage: VIN [V] 3.0 2.0 IOUT = 10mA tr = tf = 5μs, Ta = 25℃ VIN = 2.2V⇔3.2V, CIN = CL = 0.1μF (ceramic) XC6501x121 1.6 Output Voltage: VOUT [V] Input Voltage: VIN [V] 1.5 1.4 IOUT = 30mA IOUT = 100mA 4.0 3.0 2.0 tr = tf = 5μs, Ta = 25℃ VIN = 2.2V⇔3.2V, CIN = 0.1μF (ceramic), Without CL 1.6 1.5 1.4 Output Voltage: VOUT [V] Output Voltage: VOUT [V] Output Voltage: VOUT [V] Input Voltage Input Voltage IOUT = 10mA 1.0 0.0 Output Voltage -1.0 1.3 1.2 1.1 1.0 0.0 Output Voltage -1.0 IOUT = 30mA IOUT = 100mA 1.3 1.2 1.1 Time [200μs/div] Time [200μs/div] XC6501x281 6.0 Input Voltage: VIN [V] 5.0 Input Voltage 4.0 3.0 2.0 1.0 0.0 Time [200μs/div] Output Voltage IOUT = 10mA IOUT = 30mA IOUT = 100mA tr = tf = 5μs, Ta = 25℃ VIN = 3.8V⇔4.8V, CIN = CL = 0.1μF (ceramic) XC6501x281 3.3 Input Voltage: VIN [V] 3.2 3.1 3.0 2.9 2.8 2.7 Output Voltage: VOUT [V] 6.0 5.0 Input Voltage 4.0 3.0 2.0 1.0 0.0 Time [200μs/div] Output Voltage IOUT = 10mA IOUT = 30mA IOUT = 100mA tr = tf = 5μs, Ta = 25℃ VIN = 3.8V⇔4.8V, CIN = 0.1μF (ceramic), Without CL 3.3 3.2 3.1 3.0 2.9 2.8 2.7 XC6501x501 7.0 Input Voltage: VIN [V] 6.0 Input Voltage 5.0 4.0 3.0 2.0 1.0 Time [200μs/div] Output Voltage IOUT = 10mA IOUT = 30mA IOUT = 100mA tr = tf = 5μs, Ta = 25℃ VIN = 5.5V⇔6.0V, CIN = CL = 0.1μF (ceramic) XC6501x501 5.5 Input Voltage: VIN [V] 5.4 5.3 5.2 5.1 5.0 4.9 Output Voltage: VOUT [V] 7.0 6.0 Input Voltage 5.0 IOUT = 10mA tr = tf = 5μs, Ta = 25℃ VIN = 5.5V⇔6.0V, CIN = 0.1μF (ceramic), Without CL 5.5 5.4 5.3 4.0 3.0 2.0 1.0 Output Voltage IOUT = 30mA IOUT = 100mA 5.2 5.1 5.0 4.9 Time [200μs/div] 14/21 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(10) Load Transient Response XC6501x121 1.6 Output Voltage: VOUT [V] 1.4 1.2 Output Voltage 1.0 0.8 0.6 0.4 Time [40μs/div] Output Current 50mA 0.1mA ⇔ 150 100 50 0 tr = tf = 5μs, Ta = 25℃ IOUT = 0.1⇔50mA, VIN = 2.2V, CIN = 0.1μF (ceramic) CL = 0.1μF Without CL XC6501x121 300 Output Current: IOUT [mA] 250 200 Output Voltage: VOUT [V] 1.6 1.4 1.2 Output Voltage 1.0 0.8 0.6 0.4 Time [40μs/div] Output Current 50mA 10mA ⇔ 150 100 50 0 tr = tf = 5μs, Ta = 25℃ IOUT = 10⇔50mA, VIN = 2.2V, CIN = 0.1μF (ceramic) CL = 0.1μF Without CL 300 250 200 Output Current: IOUT [mA] Output Current: IOUT [mA] Output Current: IOUT [mA] XC6501x281 3.2 Output Voltage: VOUT [V] 3.0 2.8 Output Voltage 2.6 2.4 2.2 2.0 Time [40μs/div] Output Current 50mA 0.1mA ⇔ 150 100 50 0 tr = tf = 5μs, Ta = 25℃ IOUT = 0.1⇔50mA, VIN = 3.8V, CIN = 0.1μF (ceramic) CL = 0.1μF Without CL XC6501x281 300 Output Current: IOUT [mA] 250 200 Output Voltage: VOUT [V] 3.2 3.0 2.8 Output Voltage 2.6 2.4 2.2 2.0 Time [40μs/div] Output Current 50mA 10mA ⇔ 150 100 50 0 tr = tf = 5μs, Ta = 25℃ IOUT = 10⇔50mA, VIN = 3.8V, CIN = 0.1μF (ceramic) CL = 0.1μF Without CL 300 250 200 XC6501x501 5.4 Output Voltage: VOUT [V] 5.2 5.0 Output Voltage 4.8 4.6 4.4 4.2 Time [40μs/div] Output Current 50mA 0.1mA ⇔ 150 100 50 0 tr = tf = 5μs, Ta = 25℃ IOUT = 0.1⇔50mA, VIN = 6.0V, CIN = 0.1μF (ceramic) CL = 0.1μF Without CL XC6501x501 300 Output Current: IOUT [mA] 250 200 Output Voltage: VOUT [V] 5.4 5.2 5.0 Output Voltage 4.8 4.6 4.4 4.2 Time [40μs/div] Output Current 50mA 10mA ⇔ 150 100 50 0 tr = tf = 5μs, Ta = 25℃ IOUT = 10⇔50mA, VIN = 6.0V, CIN = 0.1μF (ceramic) CL = 0.1μF Without CL 300 250 200 15/21 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(11) CE Rising Respose Time XC6501x121 3.0 Input Voltage: VCE [V] 2.0 CE Input Voltage 1.0 0.0 -1.0 IOUT = 10mA VIN = 2.2V, tr = 5μs, Ta = 25℃ VCE = 0→VIN, CIN = CL = 0.1μF (ceramic) XC6501x121 3.0 Output Voltage: VOUT [V] Input Voltage: VCE [V] 2.5 2.0 3.0 2.0 CE Input Voltage 1.0 0.0 -1.0 IOUT = 10mA VIN = 2.2V, tr = 5μs, Ta = 25℃ VCE = 0→VIN, CIN = 0.1μF (ceramic), Without CL 3.0 2.5 2.0 Output Voltage: VOUT [V] Output Voltage: VOUT [V] Output Voltage: VOUT [V] Output Voltage 1.5 1.0 Output Voltage 1.5 1.0 -2.0 -3.0 IOUT = 30mA IOUT = 100mA 0.5 0.0 -2.0 -3.0 IOUT = 30mA IOUT = 100mA 0.5 0.0 Time [40μs/div] Time [40μs/div] XC6501x281 6.0 Input Voltage: VCE [V] 4.0 CE Input Voltage 2.0 0.0 -2.0 IOUT = 10mA VIN = 2.2V, tr = 5μs, Ta = 25℃ VCE = 0→VIN, CIN = CL = 0.1μF (ceramic) XC6501x281 6.0 Input Voltage: VCE [V] 5.0 4.0 Output Voltage: VOUT [V] 6.0 4.0 CE Input Voltage 2.0 0.0 -2.0 IOUT = 10mA VIN = 3.8V, tr = 5μs, Ta = 25℃ VCE = 0→VIN, CIN = 0.1μF (ceramic), Without CL 6.0 5.0 4.0 Output Voltage 3.0 2.0 Output Voltage 3.0 2.0 -4.0 -6.0 IOUT = 30mA IOUT = 100mA 1.0 0.0 -4.0 -6.0 IOUT = 30mA IOUT = 100mA 1.0 0.0 Time [40μs/div] Time [40μs/div] XC6501x501 9.0 Input Voltage: VCE [V] 6.0 CE Input Voltage 3.0 0.0 -3.0 IOUT = 10mA VIN = 2.2V, tr = 5μs, Ta = 25℃ VCE = 0→VIN, CIN = CL = 0.1μF (ceramic) XC6501x501 12.0 Input Voltage: VCE [V] 10.0 8.0 Output Voltage: VOUT [V] 9.0 6.0 CE Input Voltage 3.0 0.0 -3.0 IOUT = 10mA VIN = 6.0V, tr = 5μs, Ta = 25℃ VCE = 0→VIN, CIN = 0.1μF (ceramic), Without CL 12.0 10.0 8.0 Output Voltage 6.0 4.0 Output Voltage 6.0 4.0 -6.0 -9.0 IOUT = 30mA IOUT = 100mA 2.0 0.0 -6.0 -9.0 IOUT = 30mA IOUT = 100mA 2.0 0.0 Time [40μs/div] Time [40μs/div] 16/21 XC6501 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 　　(12) Ripple Rejection Rate XC6501x121 100 80 60 40 20 0 0.01 IOUT = 0.1mA IOUT = 10mA IOUT = 30mA IOUT = 100mA XC6501x121 Ripple Rejection Rate: PSRR [dB] Ta = 25℃ VIN = 2.2V DC+0.5Vp-pAC, Without CL Ripple Rejection Rate: PSRR [dB] Ta = 25℃ V IN = 2 .2VDC+0.5Vp-p AC, CL = 0 .1μF (ceramic) 100 80 60 40 20 0 0.01 IOUT = 0 .1mA IOUT = 10mA IOUT = 3 0mA IOUT = 1 00mA 0.1 1 10 Ripple Frequency: f [kHz] 100 0.1 1 10 Ripple Frequency: f [kHz] 100 XC6501x281 100 80 60 40 20 0 0.01 IO UT = 0 .1mA IO UT = 1 0mA IO UT = 30mA IO UT = 1 00mA XC6501x281 Ripple Rejection Rate: PSRR [dB] Ta = 25℃ VIN = 3.8V DC+0.5Vp-pAC, Without CL Ripple Rejection Rate: PSRR [dB] Ta = 25℃ V IN = 3 .8VDC+0.5Vp-p AC, CL = 0 .1μF (ceramic) 100 80 60 40 20 0 0.01 I OUT = 0.1mA I OUT = 10mA I OUT = 30mA I OUT = 100mA 0.1 1 10 100 0.1 1 10 100 Ripple Frequency: f [kHz] Ripple Frequency: f [kHz] XC6501x501 100 80 60 40 20 0 0.01 Ripple Rejection Rate: PSRR [dB] Ripple Rejection Rate: PSRR [dB] Ta = 25℃ VIN = 5 .75VDC+0.5Vp-p AC, CL = 0 .1μF (ceramic) IOUT = 0 .1mA IOUT = 1 0mA IOUT = 30mA IOUT = 1 00mA XC6501x501 Ta = 25℃ VIN = 5 .75V DC+0.5Vp-pAC, Without CL 100 80 60 40 20 0 0.01 IOUT = 0 .1mA IOUT = 1 0mA IOUT = 30mA IOUT = 1 00mA 0.1 1 10 Ripple Frequency: f [kHz] 100 0.1 1 10 Ripple Frequency: f [kHz] 100 17/21 XC6501 Series ■PACKAGING INFORMATION ● USP-3 1.2±0.08 ● USP-4 1.2±0.08 1pin INDENT 1pin INDENT (0.6) 0.3±0.05 1 2 (R0.1) (R0.05) 3 3 (0.6) 1.0±0.1 1.0±0.1 0.3±0.05 ● SSOT-24 ● SOT-25 2.9±0.2 0.4 +0.1 -0.05 2.0±0.1 0.25 -0.1 +0.15 0 -0 +0.1 5 4 0～0.1 0.35 -0.1 +0.15 0.125 -0.05 +0.1 1.3±0.2 1 (0.95) 2 1.9±0.2 3 0.15 -0.05 +0.1 18/21 XC6501 Series ■PACKAGING INFORMATION (Continued) ●USP-3 Reference Pattern Layout ●USP-3 Reference Metal Mask Design 0.4 1.35 0.25 1.2 0.25 0.7 0.3 ●USP-4 Reference Pattern Layout 1.0 0.35 0.35 ●USP-4 Reference Metal Mask Design 0.8 0.35 0.35 4 3 4 3 0.3 1 0.6 2 1 0.6 2 0.5 19/21 XC6501 Series ■PACKAGING INFORMATION (Continued) ● SOT-25 Power Dissipation Power dissipation data for the SOT-25 is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition. 1. Measurement Condition (Reference data) Condition: Mount on a board Ambient: Natural convection Soldering: Lead (Pb) free Board: Dimensions 40 x 40 mm (1600 mm2 in one side) Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces (Board of SOT-26 is used.) Material: Glass Epoxy (FR-4) Thickness: 1.6 mm Through-hole: 4 x 0.8 Diameter 2. Power Dissipation vs. Operating temperature 評価基板レイアウト（単位：mm） Evaluation Board (Unit: mm) Board Mount (Tj max = 125℃) Ambient Temperature（℃） 25 85 Power Dissipation Pd（mW） 600 240 Thermal Resistance (℃/W) 166.67 Pd-Ta特性グラフ Pd vs. Ta 700 600 500 400 300 200 100 0 25 45 65 85 Ambient Temperature Ta (℃) 周辺温度Ta（℃） 105 125 Power Dissipation Pd (mW) 20/21 許容損失Pd（mW） XC6501 Series 1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this datasheet is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this datasheet. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this datasheet. 4. The products in this datasheet are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this datasheet within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this datasheet may be copied or reproduced without the prior permission of TOREX SEMICONDUCTOR LTD. 21/21