XC6601B10BMR-G

XC6601 Series ETR03035-008b Low Voltage Input LDO Voltage Regulator with Soft-Start Function ■GENERAL DESCRIPTION The XC6601 series is a low voltage input CMOS LDO regulator which provides highly accurate (±20mV) outputs and can supply current efficiently due to its ultra low on-resistance even at low output voltages. The series is ideally suited to the applications which require very low dropout voltage operation and consists of a voltage reference, an error amplifier, a driver transistor, a current limiter, a fold back circuit, a thermal shutdown (TSD) circuit, an under voltage lock out (UVLO) circuit, soft-start circuit and a phase compensation circuit. Output voltage is selectable in 0.05V increments within a range of 0.7V to 1.8V using laser trimming technology and ceramic capacitors can be used for the output stabilization capacitor (CL). The over current protection circuit (the current limiter and the fold back circuit) as well as the thermal shutdown circuit (the TSD circuit) are built-in. These two protection circuits will operate when either the output current reaches the current limit level or the junction temperature reaches the temperature limit level. With the built-in UVLO function, the regulator output is forced OFF when the voltage level at the VBIAS pin or the VIN pin falls below the UVLO voltage level. With the soft-start function, the inrush current from VIN to VOUT for charging CL at start-up can be reduced and makes the VIN stable. The CE function enables the output to be turned off and the series to be put in stand-by mode resulting in greatly reduced power consumption. At the time of entering the stand-by mode, the series enables the electric charge at the output capacitor (CL) to be discharged via the internal auto-discharge switch which is located between the VOUT pin and the VSS pin. As a result the VOUT pin quickly returns to the VSS level. ■FEATURES ■APPLICATIONS UVLO TSD (Detect/Release) Soft-Start Time Operating Temperature Range Function Low ESR Capacitor Packages : 400mA (Limit:550mA TYP.) : 38mV@IOUT=100mA (TYP.) (at VBIAS - VOUT=2.4V) : 2.5V ~ 6.0V (VBIAS - VOUT≧1.2V) : 1.0V ~ 3.0V(VIN≦VBIAS) : 0.7V ~ 1.8V (0.05V increments) :±20mV : IBIAS=25μA , IIN=1.0μA (TYP.) IBIAS=0.01μA , IIN=0.01μA (TYP.) : VBIAS=2.0V, VIN=0.4V (TYP.) : 150℃/125℃ (TYP.) : 240μs @ VOUT=1.2V (TYP.) : -40℃ ~ 85℃ : CL High Speed Auto-Discharge : Ceramic Capacitor Compatible : USP-6C, SOT-25, SOT-89-5 Environmentally Friendly : EU RoHS Compliant, Pb Free Maximum Output Current Dropout Voltage ●Smart phones / Mobile phones ●Portable game consoles Bias Voltage Range Input Voltage Range Output Voltage Range Output Voltage Accuracy Power Consumption ●Digital still cameras / Camcorders ●Digital audio equipment ●Mobile devices / terminals ■ TYPICAL APPLICATION CIRCUIT ■ TYPICAL PEFORMANCE CHARACTERISTICS ●VBIAS =3.6V , VIN =1.8V , VOUT =1.5V ●Dropout Voltage vs. Output Current XC 6 6 0 1 B 1 2 1 M R Ta=25 [℃] 1.8V/150mA 300 I/O VBIAS=3.0V VBIAS=3.3V VBIAS=3.6V VBIAS=4.2V VBIAS=5.0V VBIAS System LSI XC6601 XC9235 XC9236 XC9237 Li-Ion 3.6V HIGH　EFFICIENCY Step-Down 1.0μF DC/DC　Converter 1.8V 1.0μF VIN VOUT 1.5V/300mA 4.7μF Input CE VSS core Dropout Voltage: Vdif(mV) 250 200 150 100 50 0 0 100 200 300 400 　Output Current: IOUT(mA) 1/30 XC6601 Series ■PIN CONFIGURATION ●USP-6C ●SOT-25 CE 6 1 VBIAS NC 5 2 VSS VOUT 4 3 VIN USP-6C (BOTTOM VIEW) ●SOT-89-5 VOUT CE 5 4 1 2 3 VIN VBIAS VSS VOUT SOT-25 (TOP VIEW) *The heat dissipation pad of the USP-6C package is recommended to solder as the recommended mount pattern and metal mask pattern for mounting strength. This pad should be electrically opened or connected to the VBIAS (No.1) pin. VIN 5 2 4 1 2 3 CE VBIAS VSS SOT-89-5 (TOP VIEW) ■PIN ASSIGNMENT PIN NUMBER PIN NAME FUNCTION VBIAS Power Supply Input 4 VIN Driver Transistor Input 5 VOUT Output 3 3 VSS Ground 4 1 CE ON/OFF Control USP-6C SOT-25 SOT-89-5 1 2 2 3 1 4 5 2 6 ■PRODUCT CLASSIFICATION ●Ordering Information XC6601①②③④⑤⑥-⑦ (*1) : CE High Active, Soft-Start Function Built-in, CL Auto Discharge Function MARK ① Type of Regulators ②③ Output Voltage ④ Output Voltage Type ⑤⑥-⑦ (*1) (*2) 2/30 DESCRIPTION Packages Taping Type (*2) SYMBOL A B 07 ~ 18 1 B MR-G ER-G PR-G DESCRIPTION Pull-Down Resistor Built-in No Pull-Down Resistor Built-in e.g.) VOUT(T)=1.2V⇒②=1,③=2 0.1V increments e.g.) 1.2V⇒②=1,③=2,④=1 0.05V increments e.g.) 1.25V⇒②=1,③=2,④=B SOT-25 (3,000pcs/Reel) USP-6C (3,000pcs/Reel) SOT-89-5 (1,000pcs/Reel) The ”-G” suffix indicates that the products are Halogen and Antimony free as well as being fully EU RoHS compliant. The device orientation is fixed in its embossed tape pocket. For reverse orientation, please contact your local Torex sales office or representative. (Standard orientation: ⑤R-⑦, Reverse orientation: ⑤L-⑦) XC6601 Series ■BLOCK DIAGRAMS (1) XC6601A Series (1)XC6601A Series VBIAS VIN Voltage Reference With Soft Start + Error Amp - VOUT Under Voltage Lock Out Thermal Current Protection Limit R1 Rdischg CE/ CE each circuit ON/OFF Control CE/ CE R pull-down R2 VSS (2) XC6601B Series (2)XC6601B Series VBIAS VIN Voltage Reference With Soft Start + Error Amp - VOUT Under Voltage Lock Out Thermal Current Protection Limit R1 Rdischg CE/ CE each circuit ON/OFF Control CE/ CE R2 VSS *Diodes inside the circuit are an ESD protection diode and a parasitic diode. 3/30 XC6601 Series ■MAXIMUM ABSOLUTE RATINGS Ta=25 ℃ PARAMETER SYMBOL RATINGS UNITS Bias Voltage Input Voltage Output Current VBIAS VIN IOUT V V mA Output Voltage VOUT CE Input Voltage VCE VSS - 0.3 ~ 7.0 VSS - 0.3 ~ 7.0 700 (*1) VSS - 0.3 ~ VBIAS + 0.3 VSS - 0.3 ~ VIN + 0.3 VSS - 0.3 ~ 7.0 100 (IC only) 1000 (40mm x 40mm Standard board) (*2) 1250 (JESD51-7 Board) (*2) 250 (IC only) 600 (40mm x 40mm Standard board) (*2) 760 (JESD51-7 Board) (*2) 500 (IC only) 1300 (40mm x 40mm Standard board) (*2) 1750 (JESD51-7 Board) (*2) -40 ~ 85 -55 ~ 125 USP-6C Power Dissipation SOT-25 SOT-89-5 Pd Operating Temperature Range Topr Storage Temperature Range Tstg (*1) IOUT=Less than Pd / (VIN-VOUT) (*2) Please refer to PACKAGING INFORMATION for the mounting condition. 4/30 V V mW ℃ ℃ XC6601 Series ■ELECTRICAL CHARACTERISTICS Ta=25 ℃ PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. Bias Voltage (*1) VBIAS VCE =VBIAS,VIN =VOUT(T)+0.3V 2.5 - 6.0 V ① VIN VBIAS=VCE=3.6V 1.0 - 3.0 V ① VOUT(E) (*3) VBIAS=VCE=3.6V, VIN =VOUT(T)+0.3V, IOUT=100mA -0.02 V ① Input Voltage (*2) Output Voltage Maximum Output Current 1 Maximum Output Current 2 Maximum Output Current 3 VCE =VBIAS ,VBIAS -VOUT(T)≧1.2V VIN =VOUT(T)+0.5V VCE =VBIAS ,VBIAS -VOUT(T)≧1.3V IOUTMAX 2 VIN =VOUT(T)+0.5V VCE =VBIAS ,VBIAS -VOUT(T)≧1.5V IOUTMAX 3 VIN =VOUT(T)+0.5V VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, Load Regulation △VOUT 1mA≦IOUT≦300mA Dropout Voltage 1 Vdif1(*7) VBIAS=VCE, IOUT=100mA Dropout Voltage 2 Vdif2 (*7) VCE =VBIAS , IOUT=200mA Dropout Voltage 3 Vdif3 (*7) VCE =VBIAS , IOUT=300mA Dropout Voltage 4 Vdif4 (*7) VCE =VBIAS , IOUT=400mA VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V Supply Current 1 IBIAS VOUT=OPEN VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V Supply Current 2 IIN VOUT=OPEN VOUT(T)≧1.0V VBIAS=VCE =3.6V, VIN=VOUT(T) VOUT= VOUT(T) - 0.05V Bias Current (*10) IBIASMAX VOUT(T)＜1.0V VBIAS=VCE =3.6V, VIN=1.0V VOUT= VOUT(T) - 0.05V Stand-by Current 1 IBIAS_STB VBIAS=6.0V, VIN=3.0V, VCE=VSS Stand-by Current 2 IIN_STB VBIAS=6.0V, VIN=3.0V, VCE=VSS VOUT(T)≧1.3V VOUT(T)+1.2V≦VBIAS≦6.0V, △VOUT/ VIN=VOUT(T)+0.3V, VCE =VBIAS , IOUT=1mA Bias Regulation (△VBIAS・ VOUT(T)＜1.3V VOUT) 2.5V≦VBIAS≦6.0V, VIN=VOUT(T)+0.3V, VCE =VBIAS , IOUT=1mA VOUT(T)≧0.90V, VOUT(T)+0.1V≦VIN≦3.0V, VBIAS=VCE=3.6V, IOUT=1mA △VOUT/ Input Regulation (△VIN・VOUT) V OUT(T)＜0.90V, 1.0V≦VIN≦3.0V VBIAS=VCE=3.6V, IOUT=1mA VCE =VBIAS, VIN =VOUT(T)+0.3V, Bias Voltage UVLO VBIAS_UVLO IOUT=1mA Input Voltage UVLO VIN_UVLO VBIAS=VCE=3.6V, IOUT=1mA VBIAS= VCE =3.6VDC+0.2Vp-pAC, VBIAS Ripple Rejection VBIAS_PSRR VIN=VOUT(T)+0.3V, IOUT=30mA,f=1kHz VIN=VOUT(T)+0.3VDC+0.2Vp-pAC, VIN Ripple Rejection VIN_PSRR VBIAS=3.6V, IOUT=30mA, f=1kHz IOUTMAX 1 VOUT(T) (*4) +0.02 E-0 (*5) UNITS CIRCUIT 200 - - mA ① 300 - - mA ① 400 - - mA ① - 8 17 mV ① mV mV mV mV ① ① ① ① E-1 (*6) E-2 (*6) E-3 (*6) E-4 (*6) 8 25 45 μA ① 0.1 1.0 3.0 μA ① - 1.0 2.5 mA ① - 0.01 0.01 0.10 0.35 μA μA ① ① - 0.01 0.3 %/V ① - 0.01 0.1 %/V ① 1.37 2.0 2.5 V ① 0.07 0.4 0.6 V ① - 40 - dB ② - 60 - dB ② 5/30 XC6601 Series ■ELECTRICAL CHARACTERISTICS (Continued) PARAMETER SYNBOL Output Voltage Temperature Characteristics △VOUT/ △Topr・VOUT Limit Current ILIM Short Current ISHORT Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Hysteresis Width CL Auto-Discharge Resistance CE "H" Level Voltage Ta=25 ℃ CONDITIONS VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V , IOUT=30mA, - 40℃≦ Topr ≦85℃ VOUT=VOUT(E)×0.95, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, VOUT=0V MIN. TYP. MAX. UNITS CIRCUIT - ±100 - ppm/℃ ① 400 550 - mA ① - 80 - mA ① TTSD Junction Temperature - 150 - ℃ ① TTSR Junction Temperature - 125 - ℃ ① - 25 - ℃ ① TTSD－TTSR 290 430 610 Ω ① VCEH VBIAS=3.6V, VIN= VOUT(T)+0.3V, VCE= VSS, VOUT=VOUT(T) VBIAS=3.6V, VIN= VOUT(T)+0.3V 0.75 - 6.0 V ① - - 0.16 V ① 2.4 - 8.0 μA ① -0.1 - 0.1 -0.1 - 0.1 μA ① 100 - 410 μs ③ Rdischg CE "L" Level Voltage VCEL VBIAS=3.6V, VIN= VOUT(T)+0.3V CE "H" Level Current (A Series) CE "H" Level Current (B Series) ICEH VBIAS=VCE=6.0V, VIN=VOUT(T)+0.3V CE "L" Level Current ICEL Soft-Start Time (*11) tSS VBIAS=6.0V, VCE=VSS VIN=VOUT(T)+0.3V VBIAS=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA VCE=0V→3.6V NOTE: * 1: Please use Bias voltage VBIAS within the range VBIAS –VOUT(E) (*3)≧1.2V * 2: Please use Input voltage VIN within the range VIN≦VBIAS * 3: VOUT(E) = Effective output voltage (Refer to the voltage chart E-0 and E-1) * 4: VOUT (T) = Specified output voltage * 5: E-0 = Please refer to the table named OUTPUT VOLTAGE CHART * 6: E-1 = Please refer to the table named DROPOUT VOLTAGE CHART * 7: Vdif = {VIN1(*8)-VOUT1(*9)}. * 8: VIN1 = The input voltage when VOUT1 appears as input voltage is gradually decreased. * 9: VOUT1 = A voltage equal to 98% of the output voltage while maintaining an amply stabilized output voltage when VIN=VBIAS at VBIAS