XC6603 Series
ETR03070-002
1A, 0.5V Low Input Voltage, High Speed LDO Regulator
（Adjustable Soft-start time with an external component）
■GENERAL DESCRIPTION
The XC6603 series is a low voltage input (0.5V) operation and provides high accuracy ±15mV / ±20mV and can supply large
current efficiently due to its ultra low on-resistance even at low output voltages.
The series is ideally suited to the applications which require high current in low input/output voltages and consists of a N-ch
driver transistor, a voltage reference, an error amplifier, a current limiter, a foldback circuit, a thermal shutdown (TSD) circuit, an
under voltage lock out (UVLO) circuit, a soft-start circuit and a phase compensation circuit.
Output voltage is selectable in 0.1V increments within a range of 0.5V to 1.8V using laser trimming technology and ceramic
capacitors can be used for the output stabilization capacitor (CL). The inrush current (IRUSH) from VIN to VOUT for charging CL at
start-up can be reduced and makes the VIN stable. Soft-start time can be adjustable with connecting a capacitor to the SS pin.
The inrush current conflicts with the soft-start time, therefore if soft-start is set longer, the inrush current is decreased.
The CE function enables the output to be turned off and the series to be put in stand-by mode resulting in greatly reduced
power consumption. At the time of entering the stand-by mode, the series enables the electric charge at the output capacitor
(CL) to be discharged via the internal switch. As a result the VOUT pin quickly returns to the VSS level.
The CE pull-down function keeps the IC to be in stand-by mode even if the CE pin is left open.
■APPLICATIONS
●
Smart phones / Mobile phones
●
Digital still cameras / Camcorders
●
Note PCs / Tablet PCs
●
E-book Readers / Electronic dictionaries
■FEATURES
Maximum Output Current
:
1A (1.3A Limit)
ON Resistance
:
0.15Ω＠VBIAS=3.6V, VOUT=1.2V
Bias Voltage Range
:
2.5V～6.0V
Input Voltage Range
:
0.5V～3.0V
Output Voltage Range
:
0.5V～1.8V (0.1V increments)
Output Voltage Accuracy
:
±0.015V＠VOUT＜1.2V
±0.020V＠VOUT≧1.2V
●
Wireless LAN
Ripple Rejection
:
Low Power Consumption
:
100μA (VBIAS), 6.5μA (VIN)＠VOUT=1.2V
Stand-by Current
:
0.01μA (VBIAS), 0.01μA (VIN)
Under-voltage Lockout
:
1.8V (VBIAS), 0.4V (VIN)
Thermal Shutdown
:
150℃＠detect, 125℃＠release
Protection Circuit
:
Foldback Current Limit, TSD, UVLO
Function
:
Adjustable Soft-start time with an external component
60dB＠f=1kHz (VBIAS_PSRR)
75dB＠f=1kHz (VIN_PSRR)
CE Pull-Down (Active High)
CL Auto Discharge
:
Ceramic Capacitor Compatible (2.2μF)
Operating Ambient Temperature
:
-40℃～+85℃
Packages
:
USP-6C, SOT-26W
Environmentally Friendly
:
EU RoHS Compliant, Pb Free
■TYPICAL PERFORMANCE
CHARACTERISTICS
XC6603A121xR-G
VBIAS=3.6V, VCE=0V→3.6V(tr=5μs), VIN=1.5V
IOUT=100mA, CBIAS=CIN=1.0μF, CL =2.2μF, Ta=25℃
4
4
CE Input Voltage
2
3
0
2
Output Voltage
-2
1
-4
0
-6
Output Voltage: VOUT(V)
CE Input Voltage: VCE(V)
■TYPICAL APPLICATION CIRCUIT
Output Capacitor
-1
Time (1ms/div)
1/29
XC6603 Series
■BLOCK DIAGRAMS
Type A
■PRODUCT CLASSIFICATION
●Ordering Information
XC6603①②③④⑤⑥-⑦
DESIGNATOR
ITEM
SYMBOL
①
Type
A
Refer to Selection Guide
②③
Output Voltage
05～18
e.g. 1.2V → ②=1, ③=2
④
Output Voltage Accuracy
1
⑤⑥-⑦
(*1)
(*1)
Packages (Order Unit)
DESCRIPTION
±0.015V (VOUT＜1.2V)、±0.020V (VOUT≧1.2V)
ER-G
USP-6C (3,000/Reel)
MR-G
SOT-26W (3,000/Reel)
The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant.
●Selection Guide
TYPE
SOFT-START
CURRENT
LIMITTER
THERMAL
SHUTDOWN
UVLO
CE PULL-DOWN
RESISTOR
CL AUTO DISCHARGE
A
Adjustable
Yes
Yes
Yes
Yes
Yes
2/29
XC6603
Series
■PIN CONFIGURATION
*The dissipation pad for the USP-6C package should be solder-plated in recommended mount pattern and metal masking so as to enhance
mounting strength and heat release. If the pad needs to be connected to other pins, it should be connected to the VSS (No. 2) pin.
■PIN ASSIGNMENT
PIN NUMBER
PIN NAME
FUNCTIONS
USP-6C
SOT-26W
1
6
VBIAS
3
4
VIN
4
3
VOUT
5
2
SS
Soft-Start Capacitor Connection
2
5
VSS
Ground
6
1
CE
ON/OFF Control
Power Supply Input
Driver Transistor Input
Output
■FUNCTION CHART
PIN NAME
CE
SIGNAL
STATUS
L
Stand-by
H
Active
OPEN
Stand-by
3/29
XC6603 Series
■ABSOLUTE MAXIMUM RATINGS
Ta=25℃
PARAMETER
SYMBOL
RATINGS
UNITS
Bias Voltage
VBIAS
-0.3～+6.5
V
Input Voltage
VIN
-0.3～+6.5
V
（*1）
Output Current
IOUT
Output Voltage (*2)
VOUT
CE Input Voltage
VCE
-0.3～+6.5
V
SS
-0.3～VBIAS+0.3 or +6.5
V
Pd
120
1000 (PCB mounted) (*4)
250
600 (PCB mounted) (*4)
mW
SS Pin Voltage
(*3)
USP-6C
Power Dissipation
SOT-26W
1.65
-0.3～VBIAS+0.3 or +6.5
-0.3～VIN+0.3 or +6.5
A
V
Operating Ambient Temperature
Topr
-40～+85
℃
Storage Temperature
Tstg
-55～+125
℃
* All voltages are described based on the VSS pin.
(*1) IOUT≦Pd/（VIN-VOUT）
(*2) The maximum value should be either VBIAS+0.3, VIN+0.3 or +6.5 in the lowest.
(*3) The maximum value should be either VBIAS+0.3 or +6.5 in the lowest.
(*4) The power dissipation measured with the test board condition is listed as reference data.
Please refer to page 25～26 for details.
4/29
XC6603
Series
■ELECTRICAL CHARACTERISTICS
Ta=25℃
PARAMETER
SYMBOL
Bias Voltage
Input Voltage
VBIAS
VIN
Output Voltage
Maximum Output Current
VOUT(E)
(*3)
Load Regulation
Dropout Voltage
(*6)
Supply Current 1
(*1)
CONDITIONS
IOUT=100mA
6.0
3.0
V
V
①
①
V
①
-
A
①
68
mV
mV
μA
①
①
②
μA
②
VOUT(T)
1.0
-
76
37
(*2)
E-1
100
+0.015
+0.020
(*5)
143
-
8.7
VOUT(T)≧1.2V
3.9
-
14.2
-
0.01
0.01
0.10
0.15
μA
μA
②
②
-
0.01
0.10
%/V
①
-
0.01
0.10
%/V
①
VSS
2.5
VSS
0.5
-
1.28
6.0
0.23
3.0
V
V
V
V
①
①
①
①
-
±30
-
ppm/℃
①
-
60
-
dB
③
IBIAS_STB
IIN_STB
VBIAS=6.0V, VIN=3.0V, VCE=VSS
VBIAS=6.0V, VIN=3.0V, VCE=VSS
Bias Line Regulation
ΔVOUT/
(ΔVBIAS・VOUT）
VOUT(T)＜1.2V, VCE=VBIAS, 2.5V≦VBIAS≦6.0V
Input Line Regulation
ΔVOUT/
(ΔVIN・VOUT）
Bias UVLO Voltage
Bias UVLO Release Voltage
Input UVLO Voltage
Input UVLO Release Voltage
Output Voltage
Temperature Characteristics
VBIAS_UVLOD
VBIAS_UVLOR
VIN_UVLOD
VIN_UVLOR
ΔVOUT/
(ΔTopr・VOUT）
Bias Ripple Rejection Ratio
VBIAS_PSRR
Input Ripple Rejection Ratio
VIN_PSRR
Current Limit
Short - Circuit Current
Thermal Shutdown
Detect Temperature
Thermal Shutdown
Release Temperature
Thermal Shutdown
Hysteresis Width
CL Auto-Discharge Resistance
CE "H" Level Voltage
CE "L" Level Voltage
CE "H" Level Current
CE "L" Level Current
SS Pin Current
Soft-Start
(*7)
Threshold Voltage
-
0.1
Stand-by Current 1
Stand-by Current 2
(*3)
2.5
0.5
VOUT(T)＜1.2V
IIN
B
CIRCUIT
-0.020
Supply Current 2
B
UNITS
VOUT(T)≧1.2V
1mA≦IOUT≦1A
IOUT=1A
IOUT=0A
IOUT=0A
MAX.
-0.015
VOUT（T)≧1.2V, VBIAS=VCE=VOUT(T)+1.3V
ΔVOUT
(*4)
Vdif
IBIAS
TYP.
VOUT(T)＜1.2V
VOUT（T)＜1.2V, VBIAS=VCE=2.5V
IOUTMAX
MIN.
VOUT（T)≧1.2V, VCE=VBIAS, VOUT(T)+1.3V≦VBIAS≦6.0V
VOUT（T)+0.1V≦VIN≦3.0V
-
75
-
dB
③
ILIM
ISHORT
IOUT=100mA
-40℃≦Topr≦85℃
VBIAS=VCE=3.6VDC+0.2Vp-pAC
IOUT=100mA, f=1kHz, CBIAS=OPEN
VIN=VOUT(T)+0.3VDC+0.2Vp-pAC
IOUT=100mA, f=1kHz, CIN=OPEN
VOUT={VOUT@IOUT=1A}×0.95
VOUT=VSS
1.0
-
1.3
90
-
A
mA
①
①
TTSD
Junction Temperature
-
150
-
℃
①
TTSR
Junction Temperature
-
125
-
℃
①
TTSD-TTSR
Junction Temperature
-
25
-
℃
①
RDCHG
VCEH
VCEL
ICEH
ICEL
Isoft
VCE=VSS, VOUT=VOUT(T)
130
0.65
VSS
3.2
-0.1
3.60
190
6.0
5.00
255
6.00
0.41
10.6
0.1
6.55
Ω
V
V
μA
μA
μA
①
④
④
④
④
⑤
(0.927)
(1.085)
(1.243)
V
-
Vsoft
VBIAS=VCE=6.0V
VBIAS=6.0V,VCE=VSS
SS Pin=VSS
NOTE:
Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, CBIAS=CIN=1.0μF, CL=2.2μF, SS Pin=OPEN
(*1) VOUT(E) = Effective output voltage
(*2) VOUT(T) = Nominal output voltage
(*3) Mount conditions affect heat dissipation. Maximum output current is not guaranteed when TSD starts to operate earlier.
(*4) Vdif＝{VIN1－VOUT1}
VIN1 is an input voltage when VOUT1 appears at the output during decreasing input voltage gradually.
VOUT1 is a voltage equal to 98% of the output voltage where VBIAS=VCE=3.6 and VIN=VOUT(T)+0.3V at IOUT=1A is input to the VIN pin.
(*5) Please refer to the table E-1 named DROPOUT VOLTAGE CHART
(*6) Supply current 1 (IBIAS) may be fluctuated because that some bias current flows into the output.
(*7) Design value
5/29
XC6603 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Dropout Voltage Chart
E-1
NOMINAL
DROPOUT VOLTAGE (mV)
OUTPUT
VBIAS=3.0V
VOLTAGE
VGS
VBIAS=3.3V
Vdif(mV)
VGS
VOUT(T)
(V)
TYP.
MAX.
(V)
0.5
2.5
152
218
2.8
0.6
2.4
155
223
0.7
2.3
0.8
2.2
2.7
VBIAS=3.6V
Vdif(mV)
TYP.
146
MAX.
213
2.6
158
228
2.5
VGS
(V)
218
155
223
TYP.
MAX.
VGS
(V)
VBIAS=5.0V
Vdif(mV)
TYP.
MAX.
VGS
(V)
3.1
3.7
4.5
3.0
3.6
4.4
2.9
152
VBIAS=4.2V
Vdif(mV)
146
213
3.5
140
208
3.4
4.2
2.7
3.3
4.1
2.6
3.2
4.0
3.1
3.9
3.0
3.8
0.9
2.1
162
233
2.4
1.0
2.0
165
238
2.3
1.1
1.9
167
243
2.2
158
228
2.5
1.2
1.8
169
253
2.1
162
233
2.4
1.3
1.7
179
268
2.0
165
238
2.3
1.4
1.6
189
283
1.9
167
243
2.2
158
228
2.8
3.6
1.5
1.5
202
303
1.8
169
253
2.1
162
233
2.7
3.5
1.6
1.4
213
328
1.7
179
268
2.0
165
238
2.6
3.4
1.7
1.3
225
373
1.6
189
283
1.9
167
243
2.5
152
218
3.3
1.8
1.2
255
423
1.5
202
303
1.8
169
253
2.4
155
223
3.2
218
155
223
2.9
* Dropout voltage is defined as the VGS(=VBIAS–VOUT(E)) of the driver transistor.
6/29
146
213
TYP.
MAX.
137
206
140
208
146
213
4.3
2.8
152
Vdif(mV)
3.7
XC6603
Series
■TEST CIRCUITS
CIRCUIT①
CIRCUIT②
CIRCUIT③
7/29
XC6603 Series
■TEST CIRCUITS (Continued)
CIRCUIT④
CIRCUIT⑤
8/29
XC6603
Series
■OPERATIONAL DESCRIPTION
The voltage divided by resistors R1 and R2 is compared with the internal reference voltage by the error amplifier.
by the subsequent output signal.
The VOUT pin is then driven
The output voltage at the VOUT pin is controlled and stabilized by a system of negative feedback.
VBIAS pin is power supply pin for output voltage control circuit, protection circuit and CE circuit.
Also, the VBIAS pin supplies some current as
output current. VIN pin is connected to a driver transistor and provides output current.
In order to obtain high efficient output current through low on-resistance, please take enough VGS (=VBIAS – VOUT(E)) of the driver transistor.
Figure1: XC6603 Series, Type A
With the XC6603 (Type A), the inrush current (IRUSH) from VIN to VOUT for charging CL at start-up can be reduced and makes the VIN stable.
With connecting a soft-start capacitor to the SS pin, rise time of the reference voltage (Vref) is adjusted, then soft-start time can be set freely.
The inrush current conflicts with the soft-start time, so that the inrush current is decreased if the soft-start time is set longer.
Please also note that the inrush current is depended on CL or VBIAS.
an appropriate soft-start time under the conditions of use.
When CL or VBIAS is larger, the inrush current becomes larger.
Please set
When the SS pin is left open, soft-start circuit will not operate.
Soft-start time is calculated by the following formulas.
tSS = CSS × Vsoft / Isoft
tSS: Soft-start time
CSS: Soft-start capacitance
Vsoft: Soft-start threshold voltage
Isoft: SS pin current
Figure2: XC6603 Series, CSS Range of use
SOFT-START
CAPACITOR
SOFT-START TIME
CSS
tSS (TYP.)
～0.01μF
～2.17ms
XC6603 Series, Soft-start
9/29
XC6603 Series
■OPERATIONAL DESCRIPTION (Continued)
The XC6603 series includes a combination of a fixed current limiter circuit and a foldback short-circuit protection. When the output current
reaches the current limit, the output voltage drops and this operation makes the output current foldback to be decreased.
When the junction temperature of the built-in driver transistor reaches the temperature limit, the thermal shutdown circuit operates and the
driver transistor will be set to OFF.
The IC resumes its operation when the thermal shutdown function is released and the IC’s operation is
automatically restored because the junction temperature drops to the level of the thermal shutdown release temperature.
When the VBIAS pin and VIN pin voltage drops, the output driver transistor is set to OFF by UVLO function to prevent false output caused by
When the VBIAS pin voltage and the VIN pin voltage rises at release voltage, the UVLO function is
unstable operation of the internal circuitry.
released.
The driver transistor is turned ON and start to operate voltage regulation.
The XC6603 internal circuitry can be shutdown via the signal to the CE pin.
In shutdown mode with CE low level voltage, the VOUT pin will be
pulled down to the VSS level via CL discharge resistance (RDCHG) placed in parallel to R1 and R2.
The CE pin has pull-down circuitry so that CE input current flows during IC operation.
then logic is fixed and the IC will operate normally.
If the CE pin voltage is taken from VBIAS pin or VSS pin
However, supply current may increase as a result of through current in the IC's internal
circuitry when medium voltage is input.
XC6603 series can quickly discharge the electric charge at the output capacitor (CL) via the internal transistor located between the VOUT pin and
the VSS pin when a low signal to the CE pin which enables a whole IC circuit put into OFF state. When the IC is disabled, electric charge at the
output capacitor (CL) is quickly discharged so that it could avoids malfunction. Discharge time of the output capacitor (CL) is set by the CL
auto-discharge resistance (RDCHG) and the output capacitor (CL). By setting time constant of a CL auto-discharge resistance value (RDCHG) and
an output capacitor value (CL) as τ(τ= CL x RDCHG), the output voltage after discharge via the internal transistor is calculated by the following
Please also note RDCHG is depended on VBIAS.
formula.
When VBIAS is larger, RDCHG is smaller.
V = VOUT(E)×e-t/τ or ｔ=τln（VOUT(E) / V）
V: Output voltage during discharge
VOUT(E): Initial Output voltage
t: Discharge time
τ: CL×RDCHG
With the XC6603 series, a stable output voltage is achievable even if used with low ESR capacitors, as a phase compensation circuit is built-in.
The output capacitor (CL) should be connected as close to VOUT pin and VSS pin to obtain stable phase compensation. Values required for the
phase compensation are as the table below.
For a stable power input, please connect a bias capacitor (CBIAS) between the VBIAS pin and the VSS pin. Also, please connect an input capacitor
(CIN) between the VIN pin and the VSS pin.
In order to ensure the stable phase compensation while avoiding run-out of values, please use the
capacitor (CBIAS, CIN and CL) which does not depend on bias or temperature too much. The table below (Figure 3) shows recommended values of CBIAS,
CIN and CL.
Figure 3: Recommended Values of CBIAS, CIN and CL (MIN.)
OUTPUT VOLTAGE
OUTPUT
BIAS CAPACITOR
INPUT CAPACITOR
VOUT(T)
CBIAS
CIN
CL
0.5V～1.8V
1.0μF
1.0μF
2.2μF
RANGE
10/29
CAPACITOR
XC6603
Series
■NOTES ON USE
1. For temporary, transitional voltage drop or voltage rising phenomenon, the IC is liable to malfunction should the ratings be exceeded.
2. Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output current. Please keep
the resistance low for the VBIAS, VIN and VSS wiring in particular.
3. Please wire the CBIAS, CIN and CL as close to the IC as possible.
4. Capacitances of these capacitors (CBIAS, CIN, CL) are decreased by the influences of bias voltage and ambient temperature. Care shall be
taken for capacitor selection to ensure stability of phase compensation from the point of ESR influence.
5. When it is used in a quite small input / output dropout voltage, output may go into unstable operation.
it in production.
Please test it thoroughly before using
6. Torex places an importance on improving our products and their reliability.
We request that users incorporate fail-safe designs and post-aging protection treatment when using Torex products in their systems.
11/29
XC6603 Series
■TYPICAL PERFORMANCE CHARACTERISTICS
* Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, SS Pin=OPEN, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
(1) Output Voltage vs. Output Current
(2) Output Voltage vs. Bias Voltage
XC6603A051MR-G
XC6603A051xR-G
0.6
Output Voltage: VOUT(V)
Output Voltage: VOUT(V)
0.6
0.5
0.4
VIN=0.8V
0.3
VIN=1.0V
0.2
0.1
0.5
0.4
IOUT=0mA
IOUT=1mA
0.3
IOUT=100mA
0.2
0.1
0.0
0.0
0
0.5
1
Output Current: I OUT(A)
0
1.5
1
Output Voltage: VOUT(V)
Output Voltage: VOUT(V)
1.0
VIN=1.5V
0.8
VIN=1.7V
0.6
0.4
0.2
0.0
6
1.2
IOUT=0mA
1.0
IOUT=1mA
0.8
IOUT=100mA
0.6
0.4
0.2
0.0
0
0.5
1
1.5
0
1
Output Current: I OUT(A)
XC6603A181MR-G
Output Voltage: VOUT(V)
1.5
VIN=2.1V
VIN=2.3V
0.5
0.0
0.5
1
Output Current: I OUT(A)
* Mount conditions affect heat dissipation.
2
3
4
Bias Voltage: VBIAS(V)
5
6
XC6603A181xR-G
2.0
Output Voltage: VOUT(V)
5
1.4
1.2
12/29
4
XC6603A121xR-G
1.4
0
3
Bias Voltage: VBIAS(V)
XC6603A121MR-G
1.0
2
1.5
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
IOUT=0mA
IOUT=1mA
IOUT=100mA
0
1
2
3
4
Bias Voltage: VBIAS(V)
5
Thermal shutdown may start to operate before reaching the current limit.
6
XC6603
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
* Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, SS Pin=OPEN, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
(3) Output Voltage vs. Input Voltage
(4) Dropout Voltage vs. Output Current
XC6603A051xR-G
XC6603A121MR-G
250
Dropout Voltage: Vdif(mV)
Output Voltage: VOUT(V)
0.6
0.5
0.4
IOUT=0mA
IOUT=1mA
0.3
IOUT=100mA
0.2
0.1
0.0
VBIAS=3.0V
VBIAS=3.3V
200
VBIAS=3.6V
VBIAS=4.2V
150
VBIAS=5.0V
100
50
0
0
1
2
3
0
Input Voltage: VIN(V)
200
400
600
800
1000
Output Current: I OUT(mA)
XC6603A121xR-G
XC6603Axx1MR-G
IOUT=1A
350
1.2
Dropout Voltage: Vdif(mV)
Output Voltage: VOUT(V)
1.4
1.0
0.8
IOUT=0mA
IOUT=1mA
0.6
IOUT=100mA
0.4
0.2
0.0
Ta=-40℃
300
Ta=25℃
250
Ta=85℃
200
150
100
50
0
0
1
2
1
3
2
3
4
5
6
VGS(*1)(V)
Input Voltage: VIN(V)
(*1)
VGS is a Gate –Source voltage of the driver transistor that is defined as
the value of VBIAS - VOUT(E).
XC6603A181xR-G
A value of the dropout voltage is determined by the value of the VGS.
Output Voltage: VOUT(V)
2.0
1.5
1.0
IOUT=0mA
IOUT=1mA
IOUT=100mA
0.5
0.0
0
1
2
3
Input Voltage: VIN(V)
13/29
XC6603 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
* Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, SS Pin=OPEN, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
(5) Supply Bias Current vs. Bias Voltage
(6) Supply Input Current vs. Input Voltage
XC6603A051xR-G
CIN=CBIAS=CL =OPEN
CIN=CBIAS=CL =OPEN
VCE=VBIAS, IOUT=0mA
IO UT=0mA
160
Supply Input Current: I IN(μA)
Supply Bias Current: I BIAS(μA)
XC6603A051xR-G
140
120
100
80
60
Ta=-40℃
40
20
Ta=25℃
Ta=85℃
0
0
1
2
3
4
5
20
Ta=-40℃
Ta=25℃
15
Ta=85℃
10
5
0
6
0
0.5
Bias Voltage: VBIAS(V)
IO UT=0mA
80
60
Ta=-40℃
40
20
Ta=25℃
Ta=85℃
0
4
5
20
Ta=-40℃
Ta=25℃
15
Ta=85℃
10
5
0
6
0
0.5
Bias Voltage: VBIAS(V)
IO UT=0mA
Supply Input Current: I IN(μA)
Supply Bias Current: I BIAS(μA)
3
CIN=CBIAS=CL =OPEN
80
60
Ta=-40℃
40
20
Ta=25℃
Ta=85℃
0
4
Bias Voltage: VBIAS(V)
14/29
2.5
VCE=VBIAS, IOUT=0mA,
100
3
2
XC6603A181xR-G
140
120
2
1.5
CIN=CBIAS=CL =OPEN
160
1
1
Input Voltage: VIN(V)
XC6603A181xR-G
0
3
CIN=CBIAS=CL =OPEN
100
3
2.5
VCE=VBIAS, IOUT=0mA
140
120
2
2
XC6603A121xR-G
160
1
1.5
CIN=CBIAS=CL =OPEN
Supply Input Current: I IN(μA)
Supply Bias Current: I BIAS(μA)
XC6603A121xR-G
0
1
Input Voltage: VIN(V)
5
6
20
15
10
Ta=-40℃
5
Ta=25℃
Ta=85℃
0
0
0.5
1
1.5
2
Input Voltage: VIN(V)
2.5
3
XC6603
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
* Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, SS Pin=OPEN, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
(7) Output Voltage vs. Ambient Temperature
(8) Supply Bias Current vs. Ambient Temperature
XC6603A051ｘR-G
XC6603A051ｘR-G
CIN=CBIAS=CL =OPEN
IO UT=0mA
Supply Bias Current: I BIAs(μA)
Output Voltage: VOUT(V)
0.52
IOUT=1mA
0.51
IOUT=100mA
0.5
0.49
0.48
-50
0
50
100
160
140
120
100
80
60
40
-50
0
50
100
Ambient Temperature: Ta(℃)
Ambient Temperature: Ta(℃)
XC6603A121ｘR-G
XC6603A121ｘR-G
CIN=CBIAS=CL =OPEN
IO UT=0mA
Supply Bias Current: I BIAs(μA)
Output Voltage: VOUT(V)
1.22
IOUT=1mA
1.21
IOUT=100mA
1.2
1.19
1.18
-50
0
50
100
160
140
120
100
80
60
40
-50
0
50
100
Ambient Temperature: Ta(℃)
Ambient Temperature: Ta(℃)
XC6603A181ｘR-G
XC6603A181ｘR-G
CIN=CBIAS= CL =OPEN
IO UT=0mA
Supply Bias Current: I BIAs(μA)
Output Voltage: VOUT(V)
1.82
IOUT=1mA
1.81
IOUT=100mA
1.8
1.79
1.78
-50
0
50
Ambient Temperature: Ta(℃)
100
160
140
120
100
80
60
40
-50
0
50
100
Ambient Temperature: Ta(℃)
15/29
XC6603 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
* Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, SS Pin=OPEN, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
(9) Supply Input Current vs. Ambient Temperature
XC6603A051ｘR-G
CIN=CBIAS=CL =OPEN
Supply Input Current: I IN(μA)
IO UT=0mA
3
2
1
0
-50
0
50
100
Ambient Temperature: Ta(℃)
XC6603A121ｘR-G
CIN=CBIAS=CL =OPEN
Supply Input Current: I IN(μA)
IO UT=0mA
12
10
8
6
4
2
0
-50
0
50
100
Ambient Temperature: Ta(℃)
XC6603A181ｘR-G
CIN=CBIAS=CL =OPEN
Supply Input Current: I IN(μA)
IO UT=0mA
16
14
12
10
8
6
4
-50
0
50
Ambient Temperature: Ta(℃)
16/29
100
XC6603
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
* Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, SS Pin=OPEN, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
(10) Bias Transient Response
(11) Input Transient Response
XC6603A051xR-G
XC6603A051xR-G
CIN=OPEN
VIN=0.8V→1.8V(tr=tf=5μs), IO UT=100mA
CBIAS=OPEN
VBIAS=3.0V→4.0V(tr=tf=5μs), IO UT=100mA
0.58
4
0.54
3
0.52
2
0.5
1
Output Voltage
0
0.56
2
0.54
1
0.52
0.5
-1
0.48
-2
Time (200μs/div)
Time (200μs/div)
XC6603A121xR-G
XC6603A121xR-G
CBIAS=OPEN
VBIAS=3.0V→4.0V(tr=tf=5μs) IOUT=100mA
4
1.24
3
1.22
2
1
1.2
Output Voltage
0
1.18
1.26
2.5
1.24
1.5
1.22
1.18
-1.5
Time (200μs/div)
XC6603A181xR-G
5
1.86
4
3
2
1
1.8
Output Voltage
0
1.78
Time (200μs/div)
1.88
Output Voltage: VOUT(V)
1.88
CIN=OPEN
VIN=2.1V→3.1V(tr=tf=5μs), IO UT=100mA
Bias Voltage: VBIAS(V)
Output Voltage: VOUT(V)
CBIAS=OPEN
VBIAS=3.6V→4.6V(tr=tf=5μs) IOUT=100mA
1.82
0.5
-0.5
XC6603A181xR-G
Bias Voltage
Output Voltage
1.2
Time (200μs/div)
1.84
3.5
Input Voltage
Input Voltage: VIN(V)
1.26
Output Voltage: VOUT(V)
1.28
Bias Voltage
Bias Voltage: VBIAS(V)
Output Voltage: VOUT(V)
CIN=OPEN
VIN=1.5V→2.5V(tr=tf=5μs), IO UT=100mA
5
1.28
0
Output Voltage
Input Voltage
4
1.86
3
1.84
2
1
1.82
Output Voltage
1.8
0
1.78
-1
Input Voltage: VIN(V)
0.48
3
Input Voltage
Input Voltage: VIN(V)
Bias Voltage
0.56
Output Voltage: VOUT(V)
5
Bias Voltage: VBIAS(V)
Output Voltage: VOUT(V)
0.58
Time (200μs/div)
17/29
XC6603 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
* Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, SS Pin=OPEN, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
(12) Load Transient Response
XC6603A051xR-G
IOUT=1mA⇔100mA(tr=tf=5μs)
Output Current
0.2
0.62
0.1
0.58
0
0.54
-0.1
0.5
Output Voltage
-0.2
Outpur Current: I OUT(A)
Output Voltage: VOUT(V)
0.66
-0.3
0.46
Time (200μs/div)
XC6603A121xR-G
IOUT=1mA⇔100mA(tr=tf=5μs)
Output Current
0.2
1.32
0.1
1.28
0
1.24
-0.1
1.2
Output Voltage
-0.2
Outpur Current: I OUT(A)
Output Voltage: VOUT(V)
1.36
-0.3
1.16
Time (200μs/div)
XC6603A181xR-G
IOUT=1mA⇔100mA(tr=tf=5μs)
Output Current
0.2
1.92
0.1
1.88
0
1.84
-0.1
1.8
Output Voltage
-0.3
1.76
Time (200μs/div)
18/29
-0.2
Outpur Current: I OUT(A)
Output Voltage: VOUT(V)
1.96
XC6603
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
* Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, SS Pin=OPEN, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
(13) CE Input Response
XC6603A051xR-G
XC6603A051xR-G
VCE=0V→3.6V(tr=5μs)
VCE=0V→3.6V(tr=5μs), IOUT=100mA
CL =10μF, CSS=100pF
-2
0.4
0.2
Input Current
-4
0
-6
-0.2
-2
0
-6
-0.2
XC6603A051xR-G
0.4
0.2
Input Current
-4
0
-6
CE Input Voltage: VCE(V)
0.6
-0.2
2
CE Input Voltage
-2
Input Current
-0.2
-6
Time (0.1ms/div)
XC6603A051xR-G
XC6603A051xR-G
VCE=0V→3.6V(tr=5μs), IOUT=100mA
CL =10μF, CSS=1nF
0.8
0.4
0
Input Current
0.2
0
-4
-0.2
-6
Time (0.1ms/div)
CE Input Voltage: VCE(V)
0.6
0.8
4
Input Current: I IN (A)
CE Input Voltage
0.2
0
-4
Time (0.1ms/div)
4
0.6
0.4
0
VCE=0V→3.6V(tr=5μs)
CL =10μF, CSS=1nF
CE Input Voltage: VCE(V)
0.8
4
Input Current: I IN (A)
CE Input Voltage: VCE(V)
VCE=0V→3.6V(tr=5μs), IOUT=100mA
CL =10μF, CSS=470pF
0.8
CE Input Voltage
0.2
-4
XC6603A051xR-G
-2
-2
Input Current
Time (0.1ms/div)
0
2
0.4
Time (0.1ms/div)
4
0.6
0
VCE=0V→3.6V(tr=5μs)
CL =10μF, CSS=470pF
2
CE Input Voltage
Input Current: I IN (A)
0
2
Input Current: I IN (A)
0.6
0.8
2
CE Input Voltage
0.4
0
-2
0.6
Input Current
0.2
0
-4
Input Current: I IN (A)
CE Input Voltage
4
CE Input Voltage: VCE(V)
2
0.8
Input Current: IIN (A)
CE Input Voltage: VCE(V)
4
CL =10μF, CSS=100pF
-0.2
-6
Time (0.1ms/div)
19/29
XC6603 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
* Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, SS Pin=OPEN, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
(13) CE Input Response (Continued)
XC6603A121xR-G
XC6603A121xR-G
VCE=0V→3.6V(tr=5μs)
VCE=0V→3.6V(tr=5μs), IOUT=100mA
CL =10μF, CSS=100pF
-2
0.4
Input Current
0.2
-4
0
-6
-0.2
2
0
-2
-6
-0.2
XC6603A121xR-G
-0.2
CE Input Voltage: VCE(V)
0.2
Input Current: I IN (A)
Input Current
-6
2
0.8
CE Input Voltage
0
-2
0.6
0.4
Input Current
0.2
-4
0
-6
-0.2
Time (0.1ms/div)
Time (0.1ms/div)
XC6603A121xR-G
XC6603A121xR-G
VCE=0V→3.6V(tr=5μs)
VCE=0V→3.6V(tr=5μs), IOUT=100mA
CL =10μF, CSS=1nF
CL =10μF, CSS=1nF
0.8
0.6
0.4
Input Current
-4
0.2
0
-6
-0.2
Time (0.1ms/div)
4
CE Input Voltage: VCE(V)
CE Input Voltage
0
20/29
4
Input Current: I IN (A)
CE Input Voltage: VCE(V)
0.4
4
CE Input Voltage: VCE(V)
0.6
0
-2
VCE=0V→3.6V(tr=5μs), IOUT=100mA
CL =10μF, CSS=470pF
0.8
CE Input Voltage
0.2
0
XC6603A121xR-G
-4
2
Input Current
Time (0.1ms/div)
0
-2
0.4
Time (0.1ms/div)
4
0.6
-4
VCE=0V→3.6V(tr=5μs)
CL =10μF, CSS=470pF
2
CE Input Voltage
2
0.8
CE Input Voltage
0
-2
Input Current: I IN (A)
0
0.6
0.8
0.6
0.4
Input Current
-4
0.2
0
-6
-0.2
Time (0.1ms/div)
Input Current: I IN (A)
CE Input Voltage
CE Input Voltage: VCE(V)
2
4
0.8
Input Current: I IN (A)
CE Input Voltage: VCE(V)
4
Input Current: I IN (A)
CL =10μF, CSS=100pF
XC6603
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
* Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, SS Pin=OPEN, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
(13) CE Input Response (Continued)
XC6603A181xR-G
XC6603A181xR-G
VCE=0V→3.6V(tr=5μs)
VCE=0V→3.6V(tr=5μs), IOUT=100mA
CL =10μF, CSS=100pF
Input Current
0.2
-4
0
-6
-0.2
0
-2
-6
XC6603A181xR-G
VCE=0V→3.6V(tr=5μs), IOUT=100mA
CL =10μF, CSS=470pF
0.8
0.4
Input Current
-4
0.2
0
-6
CE Input Voltage: VCE(V)
0.6
4
Input Current: I IN (A)
CE Input Voltage: VCE(V)
-0.2
XC6603A181xR-G
CE Input Voltage
2
0.8
CE Input Voltage
0
-2
Input Current
-4
-0.2
Time (0.1ms/div)
XC6603A181xR-G
XC6603A181xR-G
VCE=0V→3.6V(tr=5μs)
VCE=0V→3.6V(tr=5μs), IO UT=100mA
CL =10μF, CSS=1nF
0.6
0.4
Input Current
-4
0.2
0
-6
-0.2
Time (0.1ms/div)
4
CE Input Voltage: VCE(V)
CE Input Voltage
0
-2
CL =10μF, CSS=1nF
0.8
Input Current: I IN (A)
CE Input Voltage: VCE(V)
2
0.2
0
-6
-0.2
0.6
0.4
Time (0.1ms/div)
4
0.2
0
Time (0.1ms/div)
0
-2
Input Current
Time (0.1ms/div)
4
0.6
0.4
-4
VCE=0V→3.6V(tr=5μs)
CL =10μF, CSS=470pF
2
CE Input Voltage
Input Current: I IN (A)
-2
0.4
2
Input Current: I IN (A)
0
0.6
0.8
2
0.8
CE Input Voltage
0
-2
0.6
0.4
Input Current
-4
0.2
0
-6
Input Current: I IN (A)
CE Input Voltage
4
CE Input Voltage: VCE(V)
2
CL =10μF, CSS=100pF
0.8
Input Current: I IN (A)
CE Input Voltage: VCE(V)
4
-0.2
Time (0.1ms/div)
21/29
XC6603 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
* Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, SS Pin=OPEN, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
(14) CE Rising Response Time
(15) Adjustable Soft-start Time
XC6603A051xR-G
XC6603Axx1xR-G
VCE=0V→3.6V(tr=5μs)
IO UT=100mA
1.2
2
Output Voltage
0.8
-2
0.4
-4
0
-6
-0.4
1.5
1
0.5
0
VCE=0V→3.6V(tr=5μs)
IOUT=100mA
4
2
3.0
Output Voltage
2.0
-2
1.0
-4
0.0
-6
-1.0
Output Voltage: VOUT(V)
4.0
CE Input Voltage
0
Time (1ms/div)
XC6603A181xR-G
VCE=0V→3.6V(tr=5μs)
IO UT=100mA
CE Input Voltage
3.0
2
Output Voltage
0
2.0
-2
1.0
-4
0.0
-1.0
Time (1ms/div)
22/29
Output Voltage: VOUT(V)
4.0
4
-6
0.002
0.004
0.006
0.008
Soft-Start Capacitor: Css(μF)
XC6603A121xR-G
CE Input Voltage: VCE(V)
2
0
Time (1ms/div)
CE Input Voltage: VCE(V)
Soft-Start Time: tss(ms)
CE Input Voltage
Output Voltage: VOUT(V)
CE Input Voltage: VCE(V)
2.5
1.6
4
0
VCE=0V→3.6V(tr=5μs)
0.01
XC6603
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
* Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, SS Pin=OPEN, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃
(16) Bias Voltage Ripple Rejection Rate
(17) Input Voltage Ripple Rejection Rate
XC6603A051xR-G
XC6603A051xR-G
CIN=OPEN
VIN=0.8VDC+0.2Vp-pAC, IOUT=100mA
CBIAS=OPEN
100
90
80
70
60
50
40
30
20
10
0
VIN_PSRR (dB)
VBIAS_PSRR (dB)
VBIAS=3.6VDC+0.2Vp-pAC, IOUT=100mA
0.01
0.1
1
10
100
1000 10000
100
90
80
70
60
50
40
30
20
10
0
0.01
0.1
Frequency (kHz)
1
CIN=OPEN
VIN=1.5VDC+0.2Vp-pAC, IO UT=100mA
10
100
100
90
80
70
60
50
40
30
20
10
0
1000 10000
0.01
0.1
100
1000 10000
CBIAS=OPEN
CIN=OPEN
VBIAS=3.6VDC+0.2Vp-pAC, IOUT=100mA
VIN=2.1VDC+0.2Vp-pAC, IO UT=100mA
VIN_PSRR (dB)
VBIAS_PSRR (dB)
10
XC6603A181xR-G
100
90
80
70
60
50
40
30
20
10
0
1
1
Frequency (kHz)
XC6603A181xR-G
0.1
1000 10000
CBIAS=OPEN
Frequency (kHz)
0.01
100
VBIAS=3.6VDC+0.2Vp-pAC, IOUT=100mA
100
90
80
70
60
50
40
30
20
10
0
0.1
10
XC6603A121xR-G
VIN_PSRR (dB)
VBIAS_PSRR (dB)
XC6603A121xR-G
0.01
1
Frequency (kHz)
10
100
Frequency (kHz)
1000 10000
100
90
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
1000 10000
Frequency (kHz)
23/29
XC6603 Series
■PACKAGING INFORMATION
SOT-26W
(unit : mm)
2.9±0.2
+0.1
0.4 -0.05
2.0±0.05
6
5
4
0～0.1
2
0.6MAX
1
(0.95)
3
0.15
+0.1
-0.05
1.0±0.1
0.70±0.05
0.25±0.05
1.9±0.2
●USP-6C Reference Pattern Layout (unit: mm)
24/29
●USP-6C Reference Metal Mask Design (unit: mm)
XC6603
Series
■PACKAGING INFORMATION (Continued)
● USP-6C Power Dissipation
Power dissipation data for the USP-6C is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data)
Condition:
Mount on a board
Ambient:
Natural convection
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
て
2
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material:
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole: 4 x 0.8 Diameter
Evaluation Board (Unit: mm)
2. Power Dissipation vs. Ambient temperature
Board Mount (Tj max = 125℃)
Ambient Temperature（℃）
Power Dissipation Pd（mW）
25
1000
85
400
Thermal Resistance (℃/W)
100.00
許容損失Pd（mW）
Power Dissipation: Pd (mW)
Pd-Ta特性グラフ
Pd vs. Ta
1200
1000
800
600
400
200
0
25
45
65
85
105
125
Ambient周辺温度Ta（℃）
Temperature: Ta (℃)
25/29
XC6603 Series
■PACKAGING INFORMATION (Continued)
●
SOT-26W Power Dissipation
Power dissipation data for the SOT-26W is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data)
Condition:
Mount on a board
Ambient:
Natural convection
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
(Board of SOT-26 is used.)
Material:
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole:
4 x 0.8 Diameter
評価基板レイアウト（単位：mm）
Evaluation Board (Unit: mm)
2. Power Dissipation vs. Ambient temperature
Board Mount (Tj max = 125℃)
Ambient Temperature（℃）
Power Dissipation Pd（mW）
25
600
85
240
Thermal Resistance (℃/W)
166.67
Power
Dissipation: Pd (mW)
許容損失Pd（mW）
Pd-Ta特性グラフ
Pd vs. Ta
700
600
500
400
300
200
100
0
25
26/29
45
65
85
Ambient
Temperature: Ta (℃)
周辺温度Ta（℃）
105
125
XC6603
Series
■MARKING RULE
① represents product series
MARK
PRODUCT SERIES
S
XC6603A*****-G
SOT-26W
6
② represents output voltage
①
MARK
OUTPUT VOLTAGE (V)
MARK
OUTPUT VOLTAGE (V)
A
B
C
D
E
F
H
0.5
0.6
0.7
0.8
0.9
1.0
1.1
K
L
M
N
P
R
S
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1
5
②
4
③ ④
2
3
③④ represents production lot number
01 to 09, 0A to 0Z, 11 to 9Z, A1 to A9, AA to Z9, B1 to ZZ in order.
(G, I, J, O, Q, W excluded)
*No character inversion used.
27/29
XC6603 Series
■MARKING RULE (Continued)
① represents product series
MARK
PRODUCT SERIES
S
XC6603******-G
USP-6C
XC6603A*****-G
③ represents output voltage
MARK
OUTPUT VOLTAGE (V)
MARK
OUTPUT VOLTAGE (V)
A
B
C
D
E
F
H
0.5
0.6
0.7
0.8
0.9
1.0
1.1
K
L
M
N
P
R
S
1.2
1.3
1.4
1.5
1.6
1.7
1.8
④⑤ represents production lot number
01 to 09, 0A to 0Z, 11 to 9Z, A1 to A9, AA to Z9, B1 to ZZ in order.
(G, I, J, O, Q, W excluded)
*No character inversion used.
28/29
③
A
3
6
②
PRODUCT SERIES
⑤
MARK
④
2
①
1
② represents regulator type
5
4
XC6603
Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics.
Consult us, or our representatives
before use, to confirm that the information in this datasheet is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this datasheet.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this datasheet.
4. The products in this datasheet are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this datasheet within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this datasheet may be copied or reproduced without the
prior permission of TOREX SEMICONDUCTOR LTD.
29/29
工商网监
湘ICP备2023018690号
