XC6604B181MR-G

XC6604 Series ETR03071-002 0.5V Low Input, 1A High Speed LDO Regulator with Adjustable Current Limit ■GENERAL DESCRIPTION The XC6604 series is a low voltage input (0.5V) operation and provides high accuracy ±15mV / ±20mV and can supply large current efficiently due to its ultra low on-resistance even at low output voltages. The series is ideally suited to the applications which require high current in low input/output voltages and consists of a N-ch driver transistor, a voltage reference, an error amplifier, a current limiter, a fold-back circuit, a thermal shutdown (TSD) circuit, an under voltage lock out (UVLO) circuit, a soft-start circuit and a phase compensation circuit. Output voltage is selectable in 0.1V increments within a range of 0.5V to 1.8V using laser trimming technology and ceramic capacitors can be used for the output stabilization capacitor (CL). When the output current reaches the current limit, the output voltage drops as well as the output current is decreased as a function of the foldback circuit. The current limit can be adjustable with connecting a resistor to the ILIM pin. The CE function enables the output to be turned off and the series to be put in stand-by mode resulting in greatly reduced power consumption. At the time of entering the stand-by mode, the series enables the electric charge at the output capacitor (CL) to be discharged via the internal switch. As a result the VOUT pin quickly returns to the VSS level. The CE pull-down function keeps the IC to be in stand-by mode even if the CE pin is left open. ■APPLICATIONS ● Smart phones / Mobile phones ● Digital still cameras / Camcorders ● Note PCs / Tablet PCs ● E-book Readers / Electronic dictionaries ● Wireless LAN ■FEATURES Maximum Output Current : ON Resistance : 1A (1.3A Limit) 0.15Ω＠VBIAS=3.6V, VOUT=1.2V Bias Voltage Range : 2.5V～6.0V Input Voltage Range : 0.5V～3.0V Output Voltage Range : 0.5V～1.8V (0.1V increments) Output Voltage Accuracy : ±0.015V＠VOUT＜1.2V Ripple Rejection : ±0.020V＠VOUT≧1.2V 60dB＠f=1kHz (VBIAS_PSRR) 75dB＠f=1kHz (VIN_PSRR) Low Power Consumption : 100μA (VBIAS), 6.5μA (VIN)＠VOUT=1.2V Stand-by Current : 0.01μA (VBIAS), 0.01μA (VIN) Under-voltage Lockout : 1.8V (VBIAS), 0.4V (VIN) Thermal Shutdown : 150℃＠detect, 125℃＠release Protection Circuit : Foldback Current Limit, TSD, UVLO Function : Soft-start CE Pull-Down (Active High) CL High Speed Discharge : -40℃～+85℃ Output Capacitor : Ceramic Capacitor Compatible (2.2μF) Packages : USP-6C, SOT-26W Environmentally Friendly : EU RoHS Compliant, Pb Free ■TYPICAL PERFORMANCE CHARACTERISTICS XC6604x121MR-G VBIAS=VCE=3.6V, VIN=1.5V CBIAS=CIN=1.0μF, CL =2.2μF, Ta=25℃ 1.4 Output Voltage: VOUT(V) ■TYPICAL APPLICATION CIRCUIT Operating Ambient Temperature 1.2 1 0.8 0.6 RLIM2=0kΩ RLIM2=22kΩ RLIM2=56kΩ RLIM2=120kΩ 0.4 0.2 0 0.0 0.5 1.0 1.5 Output Current: I OUT(A) 1/30 XC6604 Series ■BLOCK DIAGRAMS Type A Type B ■PRODUCT CLASSIFICATION ●Ordering Information XC6604①②③④⑤⑥-⑦ DESIGNATOR ITEM SYMBOL ① Type A B Refer to Selection Guide ②③ Output Voltage 05～18 e.g. 1.2V → ②=1, ③=2 ④ Output Voltage Accuracy 1 ⑤⑥-⑦ (*1) (*1) Packages (Order Unit) DESCRIPTION ±0.015V (VOUT＜1.2V), ±0.020V (VOUT≧1.2V) ER-G USP-6C (3,000/Reel) MR-G SOT-26W (3,000/Reel) The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant. ●Selection Guide TYPE SOFT-START CURRENT LIMITTER THERMAL SHUTDOWN UVLO CE PULL-DOWN RESISTOR CL AUTO DISCHARGE A Yes Adjustable Yes Yes Yes Yes B No Adjustable Yes Yes Yes Yes 2/30 XC6604 Series ■PIN CONFIGURATION *The dissipation pad for the USP-6C package should be solder-plated in recommended mount pattern and metal masking so as to enhance mounting strength and heat release. If the pad needs to be connected to other pins, it should be connected to the VSS (No. 2) pin. ■PIN ASSIGNMENT PIN NUMBER PIN NAME FUNCTIONS USP-6C SOT-26W 1 6 VBIAS 2 5 VSS Ground 3 4 VIN Driver Transistor Input 4 3 VOUT 5 2 ILIM Current Limit Resistance Connection 6 1 CE ON/OFF Control Power Supply Input Output ■FUNCTION CHART PIN NAME CE SIGNAL STATUS L Stand-by H Active OPEN Stand-by 3/30 XC6604 Series ■ABSOLUTE MAXIMUM RATINGS Ta=25℃ PARAMETER SYMBOL RATINGS UNITS Bias Voltage VBIAS -0.3～+6.5 V Input Voltage VIN -0.3～+6.5 V （*1） Output Current IOUT Output Voltage (*2) VOUT CE Input Voltage VCE -0.3～+6.5 V ILIM -0.3～VIN+0.3 or +6.5 V Pd 120 1000 (PCB mounted) (*4) 250 600 (PCB mounted) (*4) mW ILIM Pin Voltage (*3) USP-6C Power Dissipation SOT-26W 1.65 -0.3～VBIAS+0.3 or +6.5 -0.3～VIN+0.3 or +6.5 A V Operating Ambient Temperature Topr -40～+85 ℃ Storage Temperature Tstg -55～+125 ℃ * All voltages are described based on the VSS pin. (*1) IOUT≦Pd/（VIN-VOUT） (*2) The maximum value should be either VBIAS+0.3, VIN+0.3 or +6.5 in the lowest. (*3) The maximum value should be either VIN+0.3 or +6.5 in the lowest. (*4) The power dissipation measured with the test board condition is listed as reference data. Please refer to page 26～27 for details. 4/30 XC6604 Series ■ELECTRICAL CHARACTERISTICS Ta=25℃ PARAMETER SYMBOL Bias Voltage Input Voltage VBIAS VIN Output Voltage Maximum Output Current VOUT(E) (*3) (*1) IOUTMAX Load Regulation Dropout Voltage (*6) Supply Current 1 ΔVOUT (*4) Vdif IBIAS Supply Current 2 IIN Stand-by Current 1 Stand-by Current 2 IBIAS_STB IIN_STB Bias Line Regulation ΔVOUT/ (ΔVBIAS・VOUT） Input Line Regulation ΔVOUT/ (ΔVIN・VOUT） Bias UVLO Voltage Bias UVLO Release Voltage Input UVLO Voltage Input UVLO Release Voltage Output Voltage Temperature Characteristics VBIAS_UVLOD VBIAS_UVLOR VIN_UVLOD VIN_UVLOR ΔVOUT/ (ΔTopr・VOUT） Bias Ripple Rejection Ratio VBIAS_PSRR Input Ripple Rejection Ratio VIN_PSRR (*3) Current Limit Adjustable Current (*8) Limit Accuracy Short - Circuit Current Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Thermal Shutdown Hysteresis Width CL Auto-Discharge Resistance CE "H" Level Voltage CE "L" Level Voltage CE "H" Level Current CE "L" Level Current (*7) Soft-Start Time (Type A) Output Rise Time (*7) (Type B) B B ILIM CONDITIONS VOUT(T)＜1.2V VOUT(T)≧1.2V VOUT（T)＜1.2V, VBIAS=VCE=2.5V VOUT（T)≧1.2V, VBIAS=VCE=VOUT(T)+1.3V 1mA≦IOUT≦1A IOUT=1A IOUT=0A VOUT(T)＜1.2V IOUT=0A VOUT(T)≧1.2V VBIAS=6.0V, VIN=3.0V, VCE=VSS VBIAS=6.0V, VIN=3.0V, VCE=VSS IOUT=100mA VOUT(T)＜1.2V, VCE=VBIAS, 2.5V≦VBIAS≦6.0V VOUT（T)≧1.2V, VCE=VBIAS, VOUT(T)+1.3V≦VBIAS≦6.0V VOUT（T)+0.1V≦VIN≦3.0V IOUT=100mA -40℃≦Topr≦85℃ VBIAS=VCE=3.6VDC+0.2Vp-pAC IOUT=100mA, f=1kHz, CBIAS=OPEN VIN=VOUT(T)+0.3VDC+0.2Vp-pAC IOUT=100mA, f=1kHz, CIN=OPEN VOUT={VOUT@IOUT=1A}×0.95 TYP. MAX. UNITS CIRCUIT 2.5 0.5 -0.015 -0.020 - 6.0 3.0 +0.015 +0.020 V V ① ① V ① - A ① 68 mV mV μA ① ① ② μA ② μA μA ② ② VOUT(T) 1.0 - 76 0.1 3.9 - 37 (*2) E-1 100 0.01 0.01 (*5) 143 8.7 14.2 0.10 0.15 - 0.01 0.10 %/V ① - 0.01 0.10 %/V ① VSS 2.5 VSS 0.5 - 1.28 6.0 0.23 3.0 V V V V ① ① ① ① - ±30 - ppm/℃ ① - 60 - dB ③ - 75 - dB ③ 1.0 1.3 - A ① (-35) - (35) % ① ILIM_ADJ - ISHORT VOUT=VSS - 90 - mA ① TTSD Junction Temperature - 150 - ℃ ① TTSR Junction Temperature - 125 - ℃ ① TTSD-TTSR Junction Temperature - 25 - ℃ ① RDCHG VCEH VCEL ICEH ICEL tSS VCE=VSS, VOUT=VOUT(T) 130 0.65 VSS 3.2 -0.1 225 190 6.0 430 255 6.00 0.41 10.6 0.1 600 Ω V V μA μA μs ① ④ ④ ④ ④ ⑤ tON VCE=0V→3.6V, tr=5μs μs ⑤ mA ⑤ VBIAS=VCE=6.0V VBIAS=6.0V, VCE=VSS VCE=0V→3.6V, tr=5μs CL=2.2μF Inrush Current (Type A) MIN. IRUSH CL=10μF - - 110 VOUT(T)≦1.2V - - 70 VOUT(T)＞1.2V - - 85 VOUT(T)≦1.2V - - 155 VOUT(T)＞1.2V - - 215 NOTE: Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA , CBIAS=CIN=1.0μF, CL=2.2μF, ILIM Pin=VSS (*1) VOUT(E) = Effective output voltage (*2) VOUT(T) = Nominal output voltage (*3) Mount conditions affect heat dissipation. Maximum output current is not guaranteed when TSD starts to operate earlier. (*4) Vdif＝{VIN1－VOUT1} VIN1 is an input voltage when VOUT1 appears at the output during decreasing input voltage gradually. VOUT1 is a voltage equal to 98% of the output voltage where VBIAS=VCE=3.6 and VIN=VOUT(T)+0.3V at IOUT=1A is input to the VIN pin. (*5) Please refer to the table E-1 named DROPOUT VOLTAGE CHART (*6) Supply current 1 (IBIAS) may be fluctuated because that some bias current flows into the output. (*7) A time between the CE input goes over the CE H threshold and the output reaches VOUT(E)x0.9V. (*8) Design value 5/30 XC6604 Series ■ELECTRICAL CHARACTERISTICS (Continued) ●Dropout Voltage Chart E-1 NOMINAL DROPOUT VOLTAGE (mV) OUTPUT VBIAS=3.0V VOLTAGE VGS VBIAS=3.3V Vdif(mV) VGS VOUT(T) (V) TYP. MAX. (V) 0.5 2.5 152 218 2.8 0.6 2.4 155 223 0.7 2.3 0.8 2.2 2.7 VBIAS=3.6V Vdif(mV) TYP. 146 MAX. 213 2.6 158 228 2.5 VGS (V) 218 155 223 TYP. MAX. VGS (V) VBIAS=5.0V Vdif(mV) TYP. MAX. VGS (V) 3.1 3.7 4.5 3.0 3.6 4.4 2.9 152 VBIAS=4.2V Vdif(mV) 146 213 3.5 140 208 3.4 4.2 2.7 3.3 4.1 2.6 3.2 4.0 3.1 3.9 3.0 3.8 0.9 2.1 162 233 2.4 1.0 2.0 165 238 2.3 1.1 1.9 167 243 2.2 158 228 2.5 1.2 1.8 169 253 2.1 162 233 2.4 1.3 1.7 179 268 2.0 165 238 2.3 1.4 1.6 189 283 1.9 167 243 2.2 158 228 2.8 3.6 1.5 1.5 202 303 1.8 169 253 2.1 162 233 2.7 3.5 1.6 1.4 213 328 1.7 179 268 2.0 165 238 2.6 3.4 1.7 1.3 225 373 1.6 189 283 1.9 167 243 2.5 152 218 3.3 1.8 1.2 255 423 1.5 202 303 1.8 169 253 2.4 155 223 3.2 218 155 223 2.9 * Dropout voltage is defined as the VGS(=VBIAS–VOUT(E)) of the driver transistor. 6/30 146 213 TYP. MAX. 137 206 140 208 146 213 4.3 2.8 152 Vdif(mV) 3.7 XC6604 Series ■TEST CIRCUITS CIRCUIT① CIRCUIT② CIRCUIT③ CIRCUIT④ 7/30 XC6604 Series ■TEST CIRCUITS (Continued) CIRCUIT⑤ XC6604 Series, Type A XC6604 Series, Type B 8/30 XC6604 Series ■OPERATIONAL DESCRIPTION The voltage divided by resistors R1 and R2 is compared with the internal reference voltage by the error amplifier. by the subsequent output signal. The VOUT pin is then driven The output voltage at the VOUT pin is controlled and stabilized by a system of negative feedback. VBIAS pin is power supply pin for output voltage control circuit, protection circuit and CE circuit. Also, the VBIAS pin supplies some current as output current. VIN pin is connected to a driver transistor and provides output current. In order to obtain high efficient output current through low on-resistance, please take enough VGS (=VBIAS – VOUT(E)) of the driver transistor. Figure1: XC6604 Series, Type A The XC6604 series includes a combination of a fixed current limiter circuit and a foldback short-circuit protection. When the output current reaches the current limit, the output voltage drops and this operation makes the output current foldback to be decreased. The current limit can be set freely with connecting a resistor to the ILIM pin. Please note about the foldback circuit characteristics below; ●Output voltage may not rise when the output voltage is lower than 0V at the IC operation start. ●Current over the foldback current limit will not flow at the IC operation start. ●Please use type A (with soft-start time) to prevent from inrush current, because the circuit may not response to a drastic current change such as the inrush current. When the ILIM pin is left open, driver transistor will be forced off. Current Limit is calculated by the following formulas. ILIM = VOUT（T） / ( RLIM1 + RLIM2 ) × 79645.7 [A] -6 RLIM1 = VOUT（T） / ( 16.3 × 10 ) [Ω] ILIM: Current Limit VOUT(T): Nominal Output Voltage RLIM1: Internal Current Limit Resistance RLIM2: External Current Limit Resistance Figure 2: XC6604 Series, Range of adjustable current limit OUTPUT VOLTAGE RANGE ADJUSTABLE CURRENT LIMIT VOUT(T) ILIM 0.5V～1.8V 0.5A～1.3A XC6604 Series, RLIM2 Connecting 9/30 XC6604 Series ■OPERATIONAL DESCRIPTION (Continued) With the XC6604 (Type A), the inrush current (IRUSH) from VIN to VOUT for charging CL at start-up can be reduced and makes the VIN stable. As for the XC6604, the soft-start time in the type A is optimized internally. On the other hand, the type B of the XC6604 does not have the soft-start time function. When the junction temperature of the built-in driver transistor reaches the temperature limit, the thermal shutdown circuit operates and the driver transistor will be set to OFF. The IC resumes its operation when the thermal shutdown function is released and the IC’s operation is automatically restored because the junction temperature drops to the level of the thermal shutdown release temperature. When the VBIAS pin and VIN pin voltage drops, the output driver transistor is set to OFF by UVLO function to prevent false output caused by unstable operation of the internal circuitry. When the VBIAS pin voltage and the VIN pin voltage rises at release voltage, the UVLO function is released. The driver transistor is turned ON and start to operate voltage regulation. The XC6604 internal circuitry can be shutdown via the signal to the CE pin. In shutdown mode with CE low level voltage, the VOUT pin will be pulled down to the VSS level via CL discharge resistance (RDCHG) placed in parallel to R1 and R2. The CE pin has pull-down circuitry so that CE input current flows during IC operation. If the CE pin voltage is taken from VBIAS pin or VSS pin then logic is fixed and the IC will operate normally. However, supply current may increase as a result of through current in the IC's internal circuitry when medium voltage is input. XC6604 series can quickly discharge the electric charge at the output capacitor (CL) via the internal transistor located between the VOUT pin and the VSS pin when a low signal to the CE pin which enables a whole IC circuit put into OFF state. When the IC is disabled, electric charge at the output capacitor (CL) is quickly discharged so that it could avoids malfunction. Discharge time of the output capacitor (CL) is set by the CL auto-discharge resistance (RDCHG) and the output capacitor (CL). By setting time constant of a CL auto-discharge resistance value (RDCHG) and an output capacitor value (CL) as τ(τ= CL x RDCHG), the output voltage after discharge via the internal transistor is calculated by the following formula. Please also note RDCHG is depended on VBIAS. When VBIAS is larger, RDCHG is smaller. -t/τ V = VOUT(E)×e or ｔ=τln（VOUT(E) / V） V: Output voltage during discharge VOUT(E): Initial Output voltage t: Discharge time τ: CL×RDCHG With the XC6604 series, a stable output voltage is achievable even if used with low ESR capacitors, as a phase compensation circuit is built-in. The output capacitor (CL) should be connected as close to VOUT pin and VSS pin to obtain stable phase compensation. Values required for the phase compensation are as the table below. For a stable power input, please connect a bias capacitor (CBIAS) between the VBIAS pin and the VSS pin. Also, please connect an input capacitor (CIN) between the VIN pin and the VSS pin. In order to ensure the stable phase compensation while avoiding run-out of values, please use the capacitor (CBIAS, CIN and CL) which does not depend on bias or temperature too much. The table below (Figure 3) shows recommended values of CBIAS, CIN and CL. Figure 3: Recommended Values of CBIAS, CIN and CL (MIN.) OUTPUT VOLTAGE OUTPUT BIAS CAPACITOR INPUT CAPACITOR VOUT(T) CBIAS CIN CL 0.5V～1.8V 1.0μF 1.0μF 2.2μF RANGE 10/30 CAPACITOR XC6604 Series ■NOTES ON USE 1. For temporary, transitional voltage drop or voltage rising phenomenon, the IC is liable to malfunction should the ratings be exceeded. 2. Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output current. Please keep the resistance low for the VBIAS, VIN and VSS wiring in particular. 3. Please wire the CBIAS, CIN and CL as close to the IC as possible. 4. Capacitances of these capacitors (CBIAS, CIN, CL) are decreased by the influences of bias voltage and ambient temperature. Care shall be taken for capacitor selection to ensure stability of phase compensation from the point of ESR influence. 5. When it is used in a quite small input / output dropout voltage, output may go into unstable operation. it in production. Please test it thoroughly before using 6. Torex places an importance on improving our products and their reliability. We request that users incorporate fail-safe designs and post-aging protection treatment when using Torex products in their systems. 11/30 XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA , ILIM Pin= VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (1) Output Voltage vs. Output Current XC6604x051MR-G XC6604x051MR-G 0.1 Output Voltage: VOUT(V) Output Voltage: VOUT(V) 0.6 0.5 0.4 0.3 0.2 RLIM2=0kΩ RLIM2=9.1kΩ RLIM2=22kΩ RLIM2=47kΩ 0.1 0 0.08 0.06 0.04 RLIM2=0kΩ RLIM2=9.1kΩ RLIM2=22kΩ RLIM2=47kΩ 0.02 0 0 0.5 1 1.5 2 0 0.1 Output Current: I OUT(A) XC6604x121MR-G Output Voltage: VOUT(V) Output Voltage: VOUT(V) 0.4 0.5 0.3 1.2 1 0.8 0.6 RLIM2=0kΩ RLIM2=22kΩ RLIM2=56kΩ RLIM2=120kΩ 0.4 0.2 0 0.25 0.2 0.15 RLIM2=0kΩ 0.1 RLIM2=22kΩ RLIM2=56kΩ RLIM2=120kΩ 0.05 0 0 0.5 1 1.5 2 0 0.1 Output Current: I OUT(A) 0.2 0.3 0.4 0.5 Output Current: I OUT(A) XC6604x181MR-G XC6604x181MR-G 2 0.5 Output Voltage: VOUT(V) Output Voltage: VOUT(V) 0.3 XC6604x121MR-G 1.4 1.5 1 RLIM2=0kΩ RLIM2=33kΩ 0.5 RLIM2=82kΩ RLIM2=180kΩ 0 0.4 0.3 0.2 RLIM2=0kΩ RLIM2=33kΩ 0.1 RLIM2=82kΩ RLIM2=180kΩ 0 0 0.5 1 1.5 2 Output Current: I OUT(A) * Mount conditions affect heat dissipation. Thermal shutdown may start to operate before reaching the current limit. 12/30 0.2 Output Current: I OUT(A) 0 0.1 0.2 0.3 0.4 0.5 Output Current: I OUT(A) * If start-up current is required over the current limit, IC operation will not start. Please use the current within the range of use. XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, ILIM Pin= VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (2) Limit Current vs. Adjustable Resistance (3) Output Voltage vs. Bias Voltage XC6604xxx1xR-G XC6604x051xR-G 1.2 VOUT(T)=0.5V 1 VOUT(T)=1.8V 0.6 Output Voltage: VOUT(V) VOUT(T)=1.2V 0.8 0.6 0.4 0.2 0 50 100 150 0.5 0.4 IOUT=0mA IOUT=1mA 0.3 IOUT=100mA 0.2 0.1 0.0 200 0 Adjustable Resistance: RLIM2 （kΩ） 2 4 6 Bias Voltage: VBIAS(V) XC6604x121xR-G 1.4 Output Voltage: VOUT(V) 0 1.2 1.0 IOUT=0mA IOUT=1mA 0.8 IOUT=100mA 0.6 0.4 0.2 0.0 0 2 4 Bias Voltage: VBIAS(V) 6 XC6604x181xR-G 2.0 Output Voltage: VOUT(V) Limit Current: I LIM（A) 1.4 1.5 IOUT=0mA IOUT=1mA 1.0 IOUT=100mA 0.5 0.0 0 2 4 Bias Voltage: VBIAS(V) 6 13/30 XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, ILIM Pin=VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (4) Output Voltage vs. Input Voltage (5) Dropout Voltage vs. Output Current XC6604x051xR-G XC6604x121MR-G 250 Dropout Voltage: Vdif(mV) Output Voltage: VOUT(V) 0.6 0.5 0.4 IOUT=0mA IOUT=1mA 0.3 IOUT=100mA 0.2 0.1 0.0 0 1 2 VBIAS=3.0V 200 VBIAS=3.3V VBIAS=3.6V VBIAS=4.2V 150 VBIAS=5.0V 100 50 3 0 0 Input Voltage: VIN(V) 200 400 600 800 1000 Output Current: I OUT(mA) XC6604x121xR-G XC6604xxx1MR-G IOUT=1A 1.2 350 1.0 0.8 IOUT=0mA IOUT=1mA 0.6 IOUT=100mA 0.4 0.2 0.0 0 1 2 3 Dropout Voltage: Vdif(mV) Output Voltage: VOUT(V) 1.4 Ta=25℃ 250 Ta=85℃ 200 150 100 50 0 Input Voltage: VIN(V) 1 2 3 4 5 6 VGS(*1)(V) XC6604x181xR-G (*1) 2.0 Output Voltage: VOUT(V) Ta=-40℃ 300 VGS is a Gate –Source voltage of the driver transistor that is defined as the value of VBIAS - VOUT(E). A value of the dropout voltage is determined by the value of the VGS. 1.5 1.0 IOUT=0mA IOUT=1mA 0.5 IOUT=100mA 0.0 0 1 2 Input Voltage: VIN(V) 14/30 3 XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, ILIM Pin=VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (6) Supply Bias Current vs. Bias Voltage (7) Supply Input Current vs. Input Voltage XC6604x051xR-G CIN=CBIAS=CL =OPEN CIN=CBIAS=CL =OPEN VCE=VBIAS, IOUT=0mA IO UT=0mA 160 Supply Input Current: I IN(μA) Supply Bias Current: I BIAS(μA) XC6604x051xR-G 140 120 100 80 60 Ta=-40℃ 40 20 Ta=25℃ Ta=85℃ 0 0 1 2 3 4 5 20 Ta=-40℃ Ta=25℃ 15 Ta=85℃ 10 5 0 0 6 0.5 1 1.5 2 XC6604x121xR-G 140 120 100 80 60 Ta=-40℃ 40 20 Ta=25℃ Ta=85℃ 0 2 3 4 5 CIN=CBIAS=CL =OPEN IO UT=0mA Supply Input Current: I IN(μA) Supply Bias Current: I BIAS(μA) 160 1 20 Ta=-40℃ Ta=25℃ 15 Ta=85℃ 10 5 0 0 6 0.5 2.5 3 CIN=CBIAS=CL =OPEN CIN=CBIAS=CL =OPEN IO UT=0mA 140 120 100 80 60 Ta=-40℃ 40 20 Ta=25℃ Ta=85℃ 0 3 2 VCE=VBIAS, IOUT=0mA, 160 2 1.5 XC6604x181xR-G Supply Input Current: I IN(μA) Supply Bias Current: I BIAS(μA) XC6604x181xR-G 1 1 Input Voltage: VIN(V) Bias Voltage: VBIAS(V) 0 3 XC6604x121xR-G CIN=CBIAS=CL =OPEN VCE=VBIAS, IOUT=0mA 0 2.5 Input Voltage: VIN(V) Bias Voltage: VBIAS(V) 4 Bias Voltage: VBIAS(V) 5 6 20 15 10 Ta=-40℃ 5 Ta=25℃ Ta=85℃ 0 0 0.5 1 1.5 2 2.5 3 Input Voltage: VIN(V) 15/30 XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, ILIM Pin=VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (8) Output Voltage vs. Ambient Temperature (9) Supply Bias Current vs. Ambient Temperature XC6604x051ｘR-G XC6604x051ｘR-G CIN=CBIAS=CL =OPEN IO UT=0mA Supply Bias Current: I BIAs(μA) Output Voltage: VOUT(V) 0.52 IOUT=1mA 0.51 IOUT=100mA 0.5 0.49 0.48 -50 0 50 100 160 140 120 100 80 60 40 -50 0 50 100 Ambient Temperature: Ta(℃) Ambient Temperature: Ta(℃) XC6604x121ｘR-G XC6604x121ｘR-G CIN=CBIAS=CL =OPEN IO UT=0mA Supply Bias Current: I BIAs(μA) Output Voltage: VOUT(V) 1.22 IOUT=1mA 1.21 IOUT=100mA 1.2 1.19 1.18 -50 0 50 100 160 140 120 100 80 60 40 -50 0 50 100 Ambient Temperature: Ta(℃) Ambient Temperature: Ta(℃) XC6604x181ｘR-G XC6604x181ｘR-G CIN=CBIAS= CL =OPEN IO UT=0mA Supply Bias Current: I BIAs(μA) Output Voltage: VOUT(V) 1.82 IOUT=1mA 1.81 IOUT=100mA 1.8 1.79 1.78 -50 0 50 Ambient Temperature: Ta(℃) 16/30 100 160 140 120 100 80 60 40 -50 0 50 Ambient Temperature: Ta(℃) 100 XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, ILIM Pin=VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (10) Supply Input Current vs. Ambient Temperature XC6604x051ｘR-G Supply Input Current: I IN(μA) CIN=CBIAS=CL =OPEN IOUT=0mA 3 2 1 0 -50 0 50 100 Ambient Temperature: Ta(℃) XC6604x121ｘR-G Supply Input Current: I IN(μA) CIN=CBIAS=CL =OPEN IOUT=0mA 12 10 8 6 4 2 0 -50 0 50 100 Ambient Temperature: Ta(℃) XC6604x181ｘR-G Supply Input Current: I IN(μA) CIN=CBIAS=CL =OPEN IOUT=0mA 16 14 12 10 8 6 4 -50 0 50 100 Ambient Temperature: Ta(℃) 17/30 XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, ILIM Pin=VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (11) Bias Transient Response (12) Input Transient Response XC6604x051xR-G XC6604x051xR-G CBIAS=OPEN VBIAS=3.0V→4.0V(tr=tf=5μs), IOUT=100mA 3 0.52 2 1 0.5 Output Voltage 0 0.48 Input Voltage 0.56 2 0.54 1 Output Voltage 0.5 -1 0.48 -2 Time (200μs/div) Time (200μs/div) XC6604x121xR-G XC6604x121xR-G CBIAS=OPEN CIN=OPEN VBIAS=3.0V→4.0V(tr=tf=5μs) IO UT=100mA VIN=1.5V→2.5V(tr=tf=5μs), IO UT=100mA 1.26 4 1.24 3 1.22 2 1 Output Voltage 1.18 0 1.26 2.5 1.24 1.5 1.22 1.18 -1.5 Time (200μs/div) XC6604x181xR-G 5 1.86 4 3 2 1 Output Voltage 1.78 0 Time (200μs/div) 18/30 1.88 Output Voltage: VOUT(V) 1.88 CIN=OPEN VIN=2.1V→3.1V(tr=tf=5μs), IO UT=100mA Bias Voltage: VBIAS(V) Output Voltage: VOUT(V) CBIAS=OPEN VBIAS=3.6V→4.6V(tr=tf=5μs) IOUT=100mA 1.8 0.5 -0.5 XC6604x181xR-G 1.82 Output Voltage 1.2 Time (200μs/div) Bias Voltage 3.5 Input Voltage Input Voltage 4 1.86 3 1.84 2 1.82 Output Voltage 1 1.8 0 1.78 -1 Time (200μs/div) Input Voltage: VIN(V) 1.2 Output Voltage: VOUT(V) 1.28 Input Voltage: VIN(V) 5 Bias Voltage Bias Voltage: VBIAS(V) Output Voltage: VOUT(V) 1.28 1.84 0 0.52 Input Voltage: VIN(V) 0.54 Output Voltage: VOUT(V) 4 Bias Voltage: VBIAS(V) Bias Voltage 0.56 3 0.58 5 0.58 Output Voltage: VOUT(V) CIN=OPEN VIN=0.8V→1.8V(tr=tf=5μs), IO UT=100mA XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, ILIM Pin=VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (13) Load Transient Response XC6604x051xR-G IOUT=1mA⇔100mA(tr=tf=5μs) Output Current 0.2 0.62 0.1 0.58 0 0.54 -0.1 0.5 Output Voltage -0.2 Outpur Current: I OUT(A) Output Voltage: VOUT(V) 0.66 -0.3 0.46 Time (200μs/div) XC6604x121xR-G IOUT=1mA⇔100mA(tr=tf=5μs) Output Voltage: VOUT(V) Output Current 1.32 0.1 1.28 0 1.24 -0.1 1.2 Output Voltage -0.2 Outpur Current: I OUT(A) 0.2 1.36 -0.3 1.16 Time (200μs/div) XC6604x181xR-G IOUT=1mA⇔100mA(tr=tf=5μs) 0.2 Output Current 1.92 0.1 1.88 0 1.84 -0.1 1.8 Output Voltage 1.76 -0.2 Outpur Current: I OUT(A) Output Voltage: VOUT(V) 1.96 -0.3 Time (200μs/div) 19/30 XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, ILIM Pin= VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (14) CE Input Response XC6604A051xR-G XC6604A051xR-G VCE=0V→3.6V(tr=5μs) IOUT=100mA 150 0 100 50 -4 0 -6 -50 100 0 Rush Current 50 -2 -4 Input Current Time (50μs/div) XC6604A121xR-G XC6604A121xR-G VCE=0V→3.6V(tr=5μs) IOUT=100mA 200 150 100 Input Current 50 -4 0 -6 -50 200 4 CE Input Voltage: VCE(V) CE Input Voltage 0 -2 VCE=0V→3.6V(tr=5μs) IOUT=100mA Input Current: I IN (mA) CE Input Voltage: VCE(V) 2 2 CE Input Voltage Rush Current 50 -2 -4 Input Current Time (50μs/div) XC6604A181xR-G XC6604A181xR-G 0 -50 -6 Time (200μs/div) CE Input Voltage: VCE(V) 50 200 4 Input Current: I IN (mA) CE Input Voltage: VCE(V) Input Current -4 20/30 150 100 0 -2 VCE=0V→3.6V(tr=5μs) IOUT=100mA 200 CE Input Voltage 0 -50 -6 VCE=0V→3.6V(tr=5μs) IOUT=100mA 2 150 100 0 Time (200μs/div) 4 0 -50 -6 Time (200μs/div) 4 150 Input Current: I IN (mA) Input Current 2 CE Input Voltage CE Input Voltage 150 2 0 Rush Current 50 -2 -4 100 Input Current 0 -50 -6 Time (50μs/div) Input Current: I IN (mA) -2 CE Input Voltage: VCE(V) 2 200 4 Input Current: I IN (mA) 200 CE Input Voltage Input Current: I IN (mA) CE Input Voltage: VCE(V) 4 VCE=0V→3.6V(tr=5μs) IOUT=100mA XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, ILIM Pin=VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (14) CE Input Response (Continued) CL =10μF VCE=0V→3.6V(tr=5μs), IOUT=100mA VCE=0V→3.6V(tr=5μs), IOUT=100mA 0 200 -4 100 Input Current -6 0 -100 2 Rush Current -4 -100 -6 Time (50μs/div) XC6604A121xR-G CL =10μF VCE=0V→3.6V(tr=5μs), IOUT=100mA 400 300 200 0 100 -2 Input Current 0 400 4 CE Input Voltage: VCE(V) CE Input Voltage Input Current: I IN (mA) CE Input Voltage: VCE(V) 0 VCE=0V→3.6V(tr=5μs), IOUT=100mA -100 -6 2 0 CE Input Voltage Rush Current -4 300 200 100 -2 Input Current 0 -100 -6 Time (200μs/div) Time (50μs/div) XC6604A181xR-G XC6604A181xR-G CL =10μF CL =10μF VCE=0V→3.6V(tr=5μs), IOUT=100mA VCE=0V→3.6V(tr=5μs), IOUT=100mA 400 300 200 0 100 -2 Input Current 0 -4 -100 -6 Time (200μs/div) CE Input Voltage: VCE(V) CE Input Voltage 4 Input Current: IIN (mA) 4 CE Input Voltage: VCE(V) Input Current CL =10μF 4 2 100 -2 XC6604A121xR-G -4 300 200 0 Time (200μs/div) 2 CE Input Voltage Input Current: I IN (mA) -2 CE Input Voltage: VCE(V) 300 Input Current: I IN (mA) 2 400 4 400 CE Input Voltage 2 0 400 CE Input Voltage Rush Current -2 -4 300 200 100 Input Current -6 0 Input Current: I IN (mA) 4 CE Input Voltage: VCE(V) XC6604A051xR-G CL =10μF Input Current: I IN (mA) XC6604A051xR-G -100 Time (50μs/div) 21/30 XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA, ILIM Pin=VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (15) CE Rising Response Time XC6604B051xR-G VCE=0V→3.6V(tr=5μs) VCE=0V→3.6V(tr=5μs) IO UT=100mA IOUT=100mA -2 0.4 Output Voltage -4 0 -6 -0.4 -6 -0.4 VCE=0V→3.6V(tr=5μs) IOUT=100mA 4 CE Input Voltage 1.5 1 Output Voltage 0.5 -0.5 CE Input Voltage: VCE(V) 2 2 0 2 CE Input Voltage Output Voltage 1.5 1 -2 0.5 -4 0 -6 -0.5 Time (200μs/div) Time (40μs/div) XC6604A181xR-G XC6604B181xR-G VCE=0V→3.6V(tr=5μs) VCE=0V→3.6V(tr=5μs) IOUT=100mA IOUT=100mA CE Input Voltage 0 3 2 Output Voltage 1 -4 0 -6 -1 Time (200μs/div) 4 4 4 CE Input Voltage: VCE(V) CE Input Voltage: VCE(V) 0 IO UT=100mA 4 CE Input Voltage: VCE(V) -4 XC6604B121xR-G -6 22/30 0.4 VCE=0V→3.6V(tr=5μs) 0 -2 Output Voltage XC6604A121xR-G -4 2 -2 1.2 0.8 Time (40μs/div) 0 -2 0 Time (200μs/div) 4 2 CE Input Voltage 2 CE Input Voltage 3 2 0 -2 Output Voltage: VOUT (V) 0.8 2 1.6 Output Voltage: VOUT (V) 0 CE Input Voltage: VCE(V) 1.2 Output Voltage: VOUT (V) CE Input Voltage Output Voltage: VOUT (V) 2 4 1.6 Output Voltage: VOUT (V) CE Input Voltage: VCE(V) 4 Output Voltage 1 -4 0 -6 -1 Time (40μs/div) Output Voltage: VOUT (V) XC6604A051xR-G XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA , ILIM Pin=VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (16) Rising Response Time XC6604A051xR-G CIN=OPEN VIN=0V→0.8V(tr=5μs), IOUT=100mA Input Voltage: VIN(V) 0.5 Input Voltage 1.2 0.8 0 0.4 -0.5 Output Voltage 0 -1 Output Voltage: VOUT (V) 1.6 1 -0.4 -1.5 Time (200μs/div) XC6604A121xR-G CIN=OPEN VIN=0V→1.5V(tr=5μ), IOUT=100mA Input Voltage: VIN(V) 1 Input Voltage 1 0 -1 1.5 Output Voltage 0.5 -2 0 -3 -0.5 Output Voltage: VOUT (V) 2 2 Time (200μs/div) XC6604A181xR-G CIN=OPEN VIN=0V→2.1V(tr=5μs), IOUT=100mA 3 Input Voltage: VIN(V) 2 3 1 2 0 Output Voltage 1 -1 0 -2 -1 Output Voltage: VOUT (V) 4 Input Voltage Time (200μs/div) 23/30 XC6604 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) * Unless otherwise stated, VBIAS=VCE=3.6V, VIN=VOUT(T)+0.3V, IOUT=1mA , ILIM Pin=VSS, CBIAS=CIN=1.0μF, CL=2.2μF, Ta=25℃ (17) Bias Voltage Ripple Rejection Rate (18) Input Voltage Ripple Rejection Rate XC6604x051xR-G XC6604x051xR-G 100 90 80 70 60 50 40 30 20 10 0 CIN=OPEN VIN=0.8VDC+0.2Vp-pAC, IOUT=100mA VIN_PSRR (dB) VBIAS_PSRR (dB) CBIAS=OPEN VBIAS=3.6VDC+0.2Vp-pAC, IOUT=100mA 0.01 0.1 1 10 100 1000 10000 100 90 80 70 60 50 40 30 20 10 0 0.01 0.1 Frequency (kHz) 1 XC6604x121xR-G 1 10 CIN=OPEN 100 100 90 80 70 60 50 40 30 20 10 0 0.01 1000 10000 0.1 1000 10000 CBIAS=OPEN CIN=OPEN VIN=2.1VDC+0.2Vp-pAC, IO UT=100mA 10 100 Frequency (kHz) 24/30 100 VBIAS=3.6VDC+0.2Vp-pAC, IOUT=100mA 100 90 80 70 60 50 40 30 20 10 0 1 10 XC6604x181xR-G VIN_PSRR (dB) VBIAS_PSRR (dB) XC6604x181xR-G 0.1 1 Frequency (kHz) Frequency (kHz) 0.01 1000 10000 VIN=1.5VDC+0.2Vp-pAC, IO UT=100mA VIN_PSRR (dB) VBIAS_PSRR (dB) 100 90 80 70 60 50 40 30 20 10 0 0.1 100 XC6604x121xR-G CBIAS=OPEN VBIAS=3.6VDC+0.2Vp-pAC, IOUT=100mA 0.01 10 Frequency (kHz) 1000 10000 100 90 80 70 60 50 40 30 20 10 0 0.01 0.1 1 10 100 Frequency (kHz) 1000 10000 XC6604 Series ■PACKAGING INFORMATION SOT-26W (unit : mm) 2.9±0.2 +0.1 0.4 -0.05 2.0±0.05 6 5 4 0～0.1 2 0.6MAX 1 (0.95) 3 0.15 +0.1 -0.05 1.0±0.1 0.70±0.05 0.25±0.05 1.9±0.2 ●USP-6C Reference Pattern Layout (unit: mm) ●USP-6C Reference Metal Mask Design (unit: mm) 25/30 XC6604 Series ■PACKAGING INFORMATION (Continued) ● USP-6C Power Dissipation Power dissipation data for the USP-6C is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition. 1. Measurement Condition (Reference data) Condition: Mount on a board Ambient: Natural convection Soldering: Lead (Pb) free Board: Dimensions 40 x 40 mm (1600 mm in one side) て 2 Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces Material: Glass Epoxy (FR-4) Thickness: 1.6 mm Through-hole: 4 x 0.8 Diameter Evaluation Board (Unit: mm) 2. Power Dissipation vs. Ambient temperature Board Mount (Tj max = 125℃) Ambient Temperature （℃） Power Dissipation Pd （mW） 25 1000 85 400 Thermal Resistance (℃/W) 100.00 許容損失Pd（mW） Power Dissipation: Pd (mW) Pd-Ta特性グラフ Pd vs. Ta 1200 1000 800 600 400 200 0 25 45 65 85 Ambient周辺温度Ta（℃） Temperature: Ta (℃) 26/30 105 125 XC6604 Series ■PACKAGING INFORMATION (Continued) ● SOT-26W Power Dissipation Power dissipation data for the SOT-26W is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition. 1. Measurement Condition (Reference data) Condition: Mount on a board Ambient: Natural convection Soldering: Lead (Pb) free Board: Dimensions 40 x 40 mm (1600 mm in one side) 2 Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces (Board of SOT-26 is used.) Material: Glass Epoxy (FR-4) Thickness: 1.6 mm Through-hole: 4 x 0.8 Diameter 評価基板レイアウト（単位：mm） Evaluation Board (Unit: mm) 2. Power Dissipation vs. Ambient temperature Board Mount (Tj max = 125℃) Ambient Temperature （℃） Power Dissipation Pd （mW） 25 600 85 240 Thermal Resistance (℃/W) 166.67 Power Dissipation: Pd (mW) 許容損失Pd（mW） Pd-Ta特性グラフ Pd vs. Ta 700 600 500 400 300 200 100 0 25 45 65 85 Ambient Temperature: Ta (℃) 周辺温度Ta（℃） 105 125 27/30 XC6604 Series ■MARKING RULE ① represents product series MARK PRODUCT SERIES T XC6604A*****-G U XC6604B*****-G ② represents output voltage 6 ① MARK OUTPUT VOLTAGE (V) MARK OUTPUT VOLTAGE (V) A B C D E F H 0.5 0.6 0.7 0.8 0.9 1.0 1.1 K L M N P R S 1.2 1.3 1.4 1.5 1.6 1.7 1.8 ③④ represents production lot number 01 to 09, 0A to 0Z, 11 to 9Z, A1 to A9, AA to Z9, B1 to ZZ in order. (G, I, J, O, Q, W excluded) *No character inversion used. 28/30 SOT-26W 1 5 ② 4 ③ ④ 2 3 XC6604 Series ■MARKING RULE (Continued) ① represents product series MARK PRODUCT SERIES U XC6604******-G USP-6C XC6604A*****-G B XC6604B*****-G ③ A 3 6 ② PRODUCT SERIES ⑤ MARK ④ 2 ① 1 ② represents regulator type 5 4 ③ represents output voltage MARK OUTPUT VOLTAGE (V) MARK OUTPUT VOLTAGE (V) A B C D E F H 0.5 0.6 0.7 0.8 0.9 1.0 1.1 K L M N P R S 1.2 1.3 1.4 1.5 1.6 1.7 1.8 ④⑤ represents production lot number 01 to 09, 0A to 0Z, 11 to 9Z, A1 to A9, AA to Z9, B1 to ZZ in order. (G, I, J, O, Q, W excluded) *No character inversion used. 29/30 XC6604 Series 1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this datasheet is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this datasheet. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this datasheet. 4. The products in this datasheet are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this datasheet within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this datasheet may be copied or reproduced without the prior permission of TOREX SEMICONDUCTOR LTD. 30/30