XC6701AH92MR-G

XC6701 Series ETR03034-013a 28V Operation High Speed Voltage Regulators with Stand-by Function ■GENERAL DESCRIPTION The XC6701 series are positive voltage regulator ICs manufactured using CMOS process with 28V of operation voltage. The series consists of a voltage reference, an error amplifier, a current limiter, a thermal protection circuit and a phase compensation circuit plus a driver transistor. The output voltage is selectable in 0.1V increments within the range of 1.8V to 18V which fixed by laser trimming technologies. The output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate when the output current reaches current limit level or the junction temperature reaches temperature limit level. The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power consumption. Packages are selectable depending on the applications from SOT-25, SOT-89, SOT-89-5, USP-6C, SOT-223, and TO-252. ■APPLICATIONS ●Car audio, Car navigation systems ●Note PCs / Tablet PCs ●Mobile devices / terminals ●Digital still cameras / Camcorders ●Smart phones / Mobile phones ●Multi-function power supplies ■ TYPICAL APPLICATION CIRCUITS ■FEATURES Max Output Current : More than 150mA (200mA limit) (VIN=VOUT+3.0V) Dropout Voltage : 300mV@IOUT=20mA Input Voltage Range : 2.0V ~ 28.0V Output Voltage Range : 1.8V ~ 18.0V (0.1V increments) High Accuracy : ±2% Low Power Consumption : 50μA (VOUT=5.0V) Stand-by Current : Less than 0.1μA High Ripple Rejection : 50dB@1kHz Operating Ambient Temperature : -40℃ ~ 85℃ (XC6701B/D) -40℃ ~ 105℃ (XC6701A) Low ESR Capacitor : Ceramic Capacitor Compatible (Internal Phase Compensation) Packages : SOT-25, SOT-89, SOT-89-5, USP-6C, SOT-223, TO-252 Environmentally Friendly : EU RoHS Compliant, Pb Free ■ TYPICAL PERFORMANCE CHARACTERISTICS XC6701A/B/D 502 5.4 VIN=7.0V, tr=tf=5μs CIN=CL =1.0μF (ceramic), Ta=25℃ 150 XC6701B Series With CE function 5.2 120 5.1 5.0 90 4.9 4.8 60 4.7 4.6 4.5 Output Current 4.4 30 Output Current: I OUT (mA) Output Voltage: VOUT (V) 5.3 0 Time (1ms/div) 1/29 XC6701 Series ■PIN CONFIGURATION VIN VOUT CE 5 4 NC 5 2 4 2 VIN 6 VSS 5 NC 4 1 2 3 VIN VSS NC 1 2 3 VOUT VSS VIN SOT-25 (TOP VIEW) SOT-89 (TOP VIEW) 1 2 3 VOUT VSS CE 2 1 2 3 VSS VIN 2 3 1 VIN SOT-223 (TOP VIEW) VSS VOUT TO252 TO-252 (TOP VIEW) (TOP VIEW) ■PIN ASSIGNMENT ●XC6701A/B Series SOT-25 PIN NUMBER SOT-89-5 USP-6C 1 2 3 4 5 5 2 4 3 1 6 5 2, 4 3 1 PIN NUMBER SOT-223 TO-252 PIN NAME FUNCTIONS VIN VSS NC CE VOUT Power Input Ground No connection ON/OFF Control Output PIN NAME FUNCTIONS VIN VSS VOUT Power Input Ground Output ●XC6701D Series SOT-89 3 2 1 3 2 1 1 2 3 ■PIN FUNCTION ASSIGNMENT ●XC6701A/B Series XC CE(Chip Enable) "H" Level "L" Level "OPEN" IC Operation State ON/OFF Operation ON Operation OFF Operation Undefined *CE pin should not be left open. Each should have a certain voltage. 2/29 2 NC 3 CE USP-6C (BOTTOM VIEW) SOT-89-5 (TOP VIEW) 2 VOUT 1 VOUT * The dissipation pad for the USP-6C package should be solder-plated in reference mount pattern and metal masking so as to enhance mounting strength and heat release. If the pad needs to be connected to other pins, it should be connected to the VSS (No. 5) pin. XC6701 Series ■ PRODUCT CLASSIFICATION ●Ordering Information XC6701①②③④⑤⑥-⑦(*1) : With CE function DESIGNATOR ITEM ① Type Fixed Output Voltage, Active High (-40℃≦Topr≦105℃) B Fixed Output Voltage, Active High (-40℃≦Topr≦85℃) Output Voltage 18 ~ J0 ④ Output Voltage Accuracy 2 Packages (Order Unit) MR-G PR-G ER-G ⑤⑥-⑦ DESCRIPTION A ②③ (*1) (*1) SYMBOL For the voltage within 1.8V ~ 9.9V; e.g. 2.5V ⇒ 25 5.0V ⇒ 50 For the voltage above 10.0V; For 10V, 11V, 12V, 13V, 14V, 15V, 16V, 17V and 18V units, use A, B, C, D, E, F, G, H and J for "②". e.g. 11.6V ⇒ B6 15.2V ⇒ F2 18.0V ⇒ J0 ±2% accuracy SOT-25 (3,000pcs/Reel) SOT-89-5 (1,000pcs/Reel) USP-6C (3,000pcs/Reel) The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant. XC6701①②③④⑤⑥-⑦(*1) : Without CE function DESIGNATOR ITEM SYMBOL ① Type D (*1) ②③ Output Voltage 18 ~ J0 ④ Output Voltage Accuracy 2 ⑤⑥-⑦(*1) Packages (Order Unit) FR-G JR-G PR-G DESCRIPTION Fixed Output Voltage, No CE function (-40℃≦Topr≦85℃) For the voltage within 1.8V ~ 9.9V; e.g. 2.5V ⇒ 25 5.0V ⇒ 50 For the voltage above 10.0V; For 10V, 11V, 12V, 13V, 14V, 15V, 16V, 17V and 18V units, use A, B, C, D, E, F, G, H and J for "②". e.g. 11.6V ⇒ B6 15.2V ⇒ F2 18.0V ⇒ J0 ±2% accuracy SOT-223 (1,000pcs/Reel) TO-252 (2,500pcs/Reel) SOT-89 (1,000pcs/Reel) The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant. 3/29 XC6701 Series ■ BLOCK DIAGRAMS ●XC6701A/B Series (SOT-25, SOT-89-5, USP-6C) ●XC6701D Series (SOT-89, SOT-223, TO-252) ● XC 6701B シリーズ 　（ SOT-25 , SOT-89-5 , USP-6C ) ● XC 6701D シリーズ 　（ SOT-89 , SOT-223 , TO-252) VIN VIN - Error Amp ON / OFF Control + Current Limit Voltage Reference Current Limit VOUT + Thermal Protection Thermal Protection CE Voltage Reference R1 R1 VSS VSS R2 4/29 Error Amp VOUT R2 XC6701 Series ■ABSOLUTE MAXIMUM RATINGS ●XC6701A Series Ta=25℃ PARAMETER SYMBOL RATINGS UNIT Input Voltage Output Current Output Voltage CE Input Voltage VIN IOUT VOUT VCE VSS - 0.3 ~ 30 300 (*1) VSS - 0.3 ~ VIN + 0.3 VSS - 0.3 ~ 30 250 (IC only) 600 (40mm x 40mm Standard board) (*2) 500 (IC only) 1300 (40mm x 40mm Standard board) (*2) 120 (IC only) 1000 (40mm x 40mm Standard board) (*2) -40 ~ 105 -55 ~ 125 V mA V V SOT-25 Power Dissipation SOT-89-5 Pd USP-6C Operating Ambient Temperature Storage Temperature Topr Tstg mW ℃ ℃ *1: IOUT≦Pd / (VIN-VOUT) *2: Please refer to PACKAGING INFORMATION for the mounting condition. ●XC6701B Series Ta=25℃ PARAMETER SYMBOL RATINGS UNIT Input Voltage Output Current Output Voltage CE Input Voltage VIN IOUT VOUT VCE VSS - 0.3 ~ 30 300 (*1) VSS - 0.3 ~ VIN+0.3 VSS - 0.3 ~ 30 250 (IC only) 600 (40mm x 40mm Standard board) (*2) 500 (IC only) 1300 (40mm x 40mm Standard board) (*2) 120 (IC only) 1000 (40mm x 40mm Standard board) (*2) -40 ~ 85 -55 ~ 125 V mA V V SOT-25 Power Dissipation SOT-89-5 Pd USP-6C Operating Ambient Temperature Storage Temperature Topr Tstg mW ℃ ℃ *1: IOUT≦Pd / (VIN-VOUT) *2: Please refer to PACKAGING INFORMATION for the mounting condition. ●XC6701D Series Ta=25℃ PARAMETER SYMBOL RATINGS UNIT Input Voltage Output Current Output Voltage VIN IOUT VOUT VSS - 0.3 ~ 30 300 (*1) VSS - 0.3 ~ VIN + 0.3 500 (IC only) 1000 (40mm x 40mm Standard board) (*2) 300 (IC only) 1500 (40mm x 40mm Standard board) (*2) 500 (IC only) 1800 (40mm x 40mm Standard board) (*2) -40 ~ 85 -55 ~ 125 V mA V SOT-89 Power Dissipation SOT-223 Pd TO-252 Operating Ambient Temperature Storage Temperature Topr Tstg mW ℃ ℃ *1: IOUT≦Pd / (VIN-VOUT) *2: Please refer to PACKAGING INFORMATION for the mounting condition. 5/29 XC6701 Series ■ELECTRICAL CHARACTERISTICS Ta=25℃ ●XC6701A/Bxx2 Series PARAMETER SYMBOL Output Voltage VOUT(E) Maximum Output Current IOUTMAX Load Regulation △VOUT CONDITIONS MIN. IOUT=10mA, VCE=VIN VIN= VOUT(T)+3.0V, VCE=VIN (VOUT(T)≧3.0V) VIN=VOUT(T)+3.0V, VCE=VIN (VOUT(T)＜3.0V) 1mA≦IOUT≦50mA , VCE=VIN 1.8V≦VOUT(T)≦5.0V 1mA≦IOUT≦50mA, VCE=VIN 5.1V≦VOUT(T)≦12.0V 1mA≦IOUT≦50mA, VCE=VIN 12.1V≦VOUT(T)≦18.0V TYP. MAX. E2-0 UNIT CIRCUIT V ① 150 - - mA ① 100 - - mA ① - 50 90 - 110 175 mV ① - 180 275 Dropout Voltage 1 Vdif1 IOUT=20mA, VCE=VIN E2-1 mV ① Dropout Voltage 2 Vdif2 IOUT=100mA,VCE=VIN E2-2 mV ① μA ② Supply Current ISS Stand-by Current Line Regulation 1 Line Regulation 2 ISTB △VOUT/ (△VIN・VOUT) △VOUT/ (△VIN・VOUT) Input Voltage 1.8V≦VOUT(T)≦5.0V 11 50 5.1V≦VOUT(T)≦12.0V 11 60 115 12.1V≦VOUT(T)≦18.0V 11 65 125 - 0.01 0.10 μA ② - 0.05 0.10 %/V ① - 0.15 0.30 %/V ① 2.0 - 28.0 V - - ±100 - ppm/℃ ① - 50 - dB ③ - 40 - mA ① 1.1 - 28.0 V ① VCE=VSS VOUT(T)+2.0V≦VIN≦28.0V IOUT=5mA, VCE=VIN VOUT(T)+2.0V≦VIN≦28.0V IOUT=13mA, VCE=VIN VIN XC6701A 40℃≦Ta≦105℃ XC6701B 40℃≦Ta≦85℃ VIN=[VOUT(T)+2.0V]VDC+0.5VP-PAC IOUT=20mA, f=1kHz, VCE=VIN Output Voltage △VOUT/ IOUT=20mA, Temperature Characteristics (△Ta・VOUT) VCE=VIN Power Supply Rejection Ratio PSRR Short Current ISHORT VIN=VOUT(T)+2.0V, VCE=VIN CE ”H” Voltage VCEH VIN=28.0V 105 CE ”L” Voltage VCEL VIN=28.0V 0 - 0.35 V ① CE ”H” Current ICEH VIN=VCE=28.0V -0.1 - 0.1 μA ① CE ”L” Current ICEL VIN=28.0V, VCE=VSS -0.1 - 0.1 μA ① TTSD Junction Temperature - 150 - ℃ ① TTSR Junction Temperature - 125 - ℃ ① TTSD-TTSR Junction Temperature - 25 - ℃ - Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Hysteresis Width NOTE: *1: VOUT(T): Nominal output voltage *2: VOUT(E): Effective output voltage (i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.) *3: Vdif={VIN1{Note 5} - VOUT1 {Note 4}} *4: VOUT1: In case of VOUT(T) < 3.0V, the VOUT1 is equal to 98% of the VOUT(T) when a stabilized input voltage is applied in VOUT(T)+3.0V. : In case of VOUT(T)≧3.0V, the VOUT1 is equal to 98% of the VOUT(T) when a stabilized input voltage is applied in VOUT(T)+2.0V. *5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased. *6: Unless otherwise stated, VIN=VOUT(T)+2.0V. 6/29 XC6701 Series ■ELECTRICAL CHARACTERISTICS ●XC6701Dxx2 Series ● Ta=25℃ PARAMETER SYMBOL Output Voltage VOUT(E) Maximum Output Current Load Regulation IOUTMAX △VOUT CONDITIONS MIN. IOUT=10mA VIN= VOUT(T)+3.0V (VOUT(T)≧3.0V) VIN=VOUT(T)+3.0V (VOUT(T)＜3.0V) 1mA≦IOUT≦50mA 1.8V≦VOUT(T)≦5.0V 1mA≦IOUT≦50mA 5.1V≦VOUT(T)≦12.0V 1mA≦IOUT≦50mA 12.1V≦VOUT(T)≦18.0V TYP. MAX. E2-0 UNIT CIRCUIT V ① 150 - - mA ① 100 - - mA ① - 50 90 - 110 175 mV ① - 180 275 Dropout Voltage1 Vdif1 IOUT=20mA E2-1 mV ① Dropout Voltage2 Vdif2 IOUT =100mA E2-2 mV ① Supply Current ISS 1.8V≦VOUT(T)≦5.0V Line Regulation1 Line Regulation2 Input Voltage 11 50 105 11 11 60 65 115 125 μA ② - 0.05 0.10 %/V ① - 0.15 0.30 %/V ① 2.0 - 28.0 V - - ±100 - ppm/℃ ① - 50 - dB ③ VIN=VOUT(T)+2.0V - 40 - mA ① TTSD Junction Temperature - 150 - ℃ ① TTSR Junction Temperature - 125 - ℃ ① TTSD-TTSR Junction Temperature - 25 - ℃ - 5.1V≦VOUT(T)≦12.0V 12.1V≦VOUT(T)≦18.0V △VOUT/ VOUT(T)+2.0V≦VIN≦28.0V (△VIN・VOUT) IOUT=5mA △VOUT/ VOUT(T)+2.0V≦VIN≦28.0V (△VIN・VOUT) IOUT=13mA VIN Output Voltage △VOUT/ Temperature Characteristics (△Ta・VOUT) Power Supply PSRR Rejection Ratio Short Current Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Hysteresis Width ISHORT IOUT=20mA -40℃≦Ta≦85℃ VIN=[VOUT(T)+2.0V]+0.5VP-PAC IOUT=20mA, f=1kHz 7/29 XC6701 Series ■ELECTRICAL CHARACTERISTICS ●Voltage Chart SYMBOL E2-0 E2-1 E2-2 DROPOUT VOLTAGE 1 (mV) IOUT=20mA DROPOUT VOLTAGE 2 (mV) IOUT=100mA PARAMETER OUTPUT VOLTAGE(V) NOMINAL OUTPUT VOLTAGE (V) (2% products) VOUT(T) 8/29 VOUT Vdif1 Vdif2 (V) MIN. MAX. TYP. MAX. TYP. MAX. 1.8 1.764 1.836 550 710 2200 2700 1.9 1.862 1.938 550 710 2200 2700 2.0 1.960 2.040 450 600 1900 2600 2.1 2.058 2.142 450 600 1900 2600 2.2 2.156 2.244 390 520 1700 2200 2.3 2.254 2.346 390 520 1700 2200 2.4 2.352 2.448 390 520 1700 2200 2.5 2.450 2.550 310 450 1500 1900 2.6 2.548 2.652 310 450 1500 1900 2.7 2.646 2.754 310 450 1500 1900 2.8 2.744 2.856 310 450 1500 1900 2.9 2.842 2.958 310 450 1500 1900 3.0 2.940 3.060 260 360 1300 1700 3.1 3.038 3.162 260 360 1300 1700 3.2 3.136 3.264 260 360 1300 1700 3.3 3.234 3.366 260 360 1300 1700 3.4 3.332 3.468 260 360 1300 1700 3.5 3.430 3.570 260 360 1300 1700 3.6 3.528 3.672 260 360 1300 1700 3.7 3.626 3.774 260 360 1300 1700 3.8 3.724 3.876 260 360 1300 1700 3.9 3.822 3.978 260 360 1300 1700 4.0 3.920 4.080 220 320 1100 1500 4.1 4.018 4.182 220 320 1100 1500 4.2 4.116 4.284 220 320 1100 1500 4.3 4.214 4.386 220 320 1100 1500 4.4 4.312 4.488 220 320 1100 1500 4.5 4.410 4.590 220 320 1100 1500 4.6 4.508 4.692 220 320 1100 1500 4.7 4.606 4.794 220 320 1100 1500 4.8 4.704 4.896 220 320 1100 1500 4.9 4.802 4.998 220 320 1100 1500 5.0 4.900 5.100 190 280 1000 1300 5.1 4.998 5.202 190 280 1000 1300 5.2 5.096 5.304 190 280 1000 1300 5.3 5.194 5.406 190 280 1000 1300 5.4 5.292 5.508 190 280 1000 1300 5.5 5.390 5.610 190 280 1000 1300 5.6 5.488 5.712 190 280 1000 1300 5.7 5.586 5.814 190 280 1000 1300 5.8 5.684 5.916 190 280 1000 1300 5.9 5.782 6.018 190 280 1000 1300 6.0 5.880 6.120 190 280 1000 1300 XC6701 Series ■ELECTRICAL CHARACTERISTICS ●Voltage Chart (Continued) SYMBOL E2-0 E2-1 E2-2 DROPOUT VOLTAGE 1 (mV) IOUT=20mA DROPOUT VOLTAGE 2 (mV) IOUT=100mA PARAMETER OUTPUT VOLTAGE(V) NOMINAL OUTPUT VOLTAGE (V) (2% products) VOUT(T) VOUT Vdif1 Vdif2 (V) MIN. MAX. TYP. MAX. TYP. MAX. 6.1 5.978 6.222 190 280 1000 1300 6.2 6.076 6.324 190 280 1000 1300 6.3 6.174 6.426 190 280 1000 1300 6.4 6.272 6.528 190 280 1000 1300 6.5 6.370 6.630 170 230 800 1150 6.6 6.468 6.732 170 230 800 1150 6.7 6.566 6.834 170 230 800 1150 6.8 6.664 6.936 170 230 800 1150 6.9 6.762 7.038 170 230 800 1150 7.0 6.860 7.140 170 230 800 1150 7.1 6.958 7.242 170 230 800 1150 7.2 7.056 7.344 170 230 800 1150 7.3 7.154 7.446 170 230 800 1150 7.4 7.252 7.548 170 230 800 1150 7.5 7.350 7.650 170 230 800 1150 7.6 7.448 7.752 170 230 800 1150 7.7 7.546 7.854 170 230 800 1150 7.8 7.644 7.956 170 230 800 1150 7.9 7.742 8.058 170 230 800 1150 8.0 7.840 8.160 170 230 800 1150 8.1 7.938 8.262 130 190 700 950 8.2 8.036 8.364 130 190 700 950 8.3 8.134 8.466 130 190 700 950 8.4 8.232 8.568 130 190 700 950 8.5 8.330 8.670 130 190 700 950 8.6 8.428 8.772 130 190 700 950 8.7 8.526 8.874 130 190 700 950 8.8 8.624 8.976 130 190 700 950 8.9 8.722 9.078 130 190 700 950 9.0 8.820 9.180 130 190 700 950 9.1 8.918 9.282 130 190 700 950 9.2 9.016 9.384 130 190 700 950 9.3 9.114 9.486 130 190 700 950 9.4 9.212 9.588 130 190 700 950 9.5 9.310 9.690 130 190 700 950 9.6 9.408 9.792 130 190 700 950 9.7 9.506 9.894 130 190 700 950 9.8 9.604 9.996 130 190 700 950 9.9 9.702 10.098 130 190 700 950 10.0 9.800 10.200 130 190 700 950 9/29 XC6701 Series ■ELECTRICAL CHARACTERISTICS ●Voltage Chart (Continued) SYMBOL E2-0 E2-1 E2-2 DROPOUT VOLTAGE 1 (mV) IOUT=20mA DROPOUT VOLTAGE 2 (mV) IOUT=100mA PARAMETER OUTPUT VOLTAGE(V) NOMINAL OUTPUT VOLTAGE (V) (2% products) VOUT(T) VOUT Vdif1 Vdif2 (V) MIN. MAX. TYP. MAX. TYP. MAX. 10.1 9.898 10.302 120 170 650 850 10.2 9.996 10.404 120 170 650 850 10.3 10.094 10.506 120 170 650 850 10.4 10.192 10.608 120 170 650 850 10.5 10.290 10.710 120 170 650 850 10.6 10.388 10.812 120 170 650 850 10.7 10.486 10.914 120 170 650 850 10.8 10.584 11.016 120 170 650 850 10.9 10.682 11.118 120 170 650 850 11.0 10.780 11.220 120 170 650 850 11.1 10.878 11.322 120 170 650 850 11.2 10.976 11.424 120 170 650 850 11.3 11.074 11.526 120 170 650 850 11.4 11.172 11.628 120 170 650 850 11.5 11.270 11.730 120 170 650 850 11.6 11.368 11.832 120 170 650 850 11.7 11.466 11.934 120 170 650 850 11.8 11.564 12.036 120 170 650 850 11.9 11.662 12.138 120 170 650 850 12.0 11.760 12.240 120 170 650 850 12.1 11.858 12.342 120 170 650 850 12.2 11.956 12.444 120 170 650 850 12.3 12.054 12.546 120 170 650 850 12.4 12.152 12.648 120 170 650 850 12.5 12.250 12.750 120 170 650 850 12.6 12.348 12.852 120 170 650 850 12.7 12.446 12.954 120 170 650 850 12.8 12.544 13.056 120 170 650 850 12.9 12.642 13.158 120 170 650 850 13.0 12.740 13.260 120 170 650 850 13.1 12.838 13.362 120 170 650 850 13.2 12.936 13.464 120 170 650 850 13.3 13.034 13.566 120 170 650 850 13.4 13.132 13.668 120 170 650 850 13.5 13.230 13.770 120 170 650 850 13.6 13.328 13.872 120 170 650 850 13.7 13.426 13.974 120 170 650 850 13.8 13.524 14.076 120 170 650 850 13.9 13.622 14.178 120 170 650 850 14.0 13.720 14.280 120 170 650 850 10/29 XC6701 Series ■ELECTRICAL CHARACTERISTICS ●Voltage Chart (Continued) SYMBOL E2-0 E2-1 E2-2 DROPOUT VOLTAGE 1 (mV) IOUT=20mA DROPOUT VOLTAGE 2 (mV) IOUT=100mA PARAMETER OUTPUT VOLTAGE(V) NOMINAL OUTPUT VOLTAGE (V) (2% products) VOUT(T) VOUT Vdif1 Vdif2 (V) MIN. MAX. TYP. MAX. TYP. MAX. 14.1 13.818 14.382 120 170 650 850 14.2 13.916 14.484 120 170 650 850 14.3 14.014 14.586 120 170 650 850 14.4 14.112 14.688 120 170 650 850 14.5 14.210 14.790 120 170 650 850 14.6 14.308 14.892 120 170 650 850 14.7 14.406 14.994 120 170 650 850 14.8 14.504 15.096 120 170 650 850 14.9 14.602 15.198 120 170 650 850 15.0 14.700 15.300 120 170 650 850 15.1 14.798 15.402 120 170 650 850 15.2 14.896 15.504 120 170 650 850 15.3 14.994 15.606 120 170 650 850 15.4 15.092 15.708 120 170 650 850 15.5 15.190 15.810 120 170 650 850 15.6 15.288 15.912 120 170 650 850 15.7 15.386 16.014 120 170 650 850 15.8 15.484 16.116 120 170 650 850 15.9 15.582 16.218 120 170 650 850 16.0 15.680 16.320 120 170 650 850 16.1 15.778 16.422 120 170 650 850 16.2 15.876 16.524 120 170 650 850 16.3 15.974 16.626 120 170 650 850 16.4 16.072 16.728 120 170 650 850 16.5 16.170 16.830 120 170 650 850 16.6 16.268 16.932 120 170 650 850 16.7 16.366 17.034 120 170 650 850 16.8 16.464 17.136 120 170 650 850 16.9 16.562 17.238 120 170 650 850 17.0 16.660 17.340 120 170 650 850 17.1 16.758 17.442 120 170 650 850 17.2 16.856 17.544 120 170 650 850 17.3 16.954 17.646 120 170 650 850 17.4 17.052 17.748 120 170 650 850 17.5 17.150 17.850 120 170 650 850 17.6 17.248 17.952 120 170 650 850 17.7 17.346 18.054 120 170 650 850 17.8 17.444 18.156 120 170 650 850 17.9 17.542 18.258 120 170 650 850 18.0 17.640 18.360 120 170 650 850 11/29 XC6701 Series ■ OPERATIONAL EXPLANATION R1 R2 The voltage divided by resistors R1 & R2 is compared with the internal reference voltage by the error amplifier. The Pchannel MOSFET, which is connected to the VOUT pin, is then driven by the subsequent output signal. The output voltage at the VOUT pin is controlled and stabilized by a system of negative feedback. The current limit circuit, short protect circuit and thermal protection circuit operate in relation to the level of output current and heat generation. Further, the IC’s internal circuitry can be shutdown via the CE pin’s signal. The XC6701 series includes a current fold-back circuit as a short circuit protection. When the load current reaches the current limit level, the current fold-back circuit operates and output voltage drops. The output voltage drops further and output current decreases. When the output pin is shorted, a current of about 30mA flows. The IC’s internal circuitry can be shutdown via the signal from the CE pin with the XC6701A/B series. In shutdown mode, output at the VOUT pin will be pulled down by R1 and R2 to the VSS level. Note that as the XC6701B series’ operations will become unstable with the CE pin open. We suggest that you use this IC with either a VIN voltage or a VSS voltage input at the CE pin. If this IC is used with the correct specifications for the CE pin, the operational logic is fixed and the IC will operate normally. However, supply current may increase as a result of through current in the IC’s internal circuitry if a medium voltage is applied. When the junction temperature of the built-in driver transistor reaches the temperature limit level (150℃ TYP.), the thermal protection circuit operates and the driver transistor will be set to OFF. The IC resumes its operation when the thermal shutdown function is released and the IC’s operation is automatically restored because the junction temperature drops to the level of the thermal shutdown release voltage. For the stable operation of the IC, over 2.0V of input voltage is necessary. The output voltage may not be generated normally if the input voltage is less than 2.0V. ■ NOTES ON USE 1． For temporary, transitional voltage drop or voltage rising phenomenon, the IC is liable to malfunction should the ratings be exceeded. 2． Where wiring impedance is high, operations may become unstable due to the noise and/or phase lag depending on output current. Please strengthen VIN and VSS wiring in particular. 3. Phase compensation inside the IC is performed in the XC6701 series. Therefore, an abnormal oscillation does not occur even if there is no output capacitor CL. An input capacitor CIN around 0.1μF~1.0μF between the VIN pin and the VSS pin is required for input stability. Also, the output voltage fluctuation such as under shoot or over shoot, which occurs because of the load change can be controlled by placing the output capacitor CL around 0.1μF~1.0μF between the VOUT pin and VSS pin. The input capacitor (CIN) and the output capacitor (CL) should be placed to the IC as close as possible with a shorter wiring. 4. When the IC is operated with no load, the output voltage may increase in the high temperature beyond operating range. 5. Torex places an importance on improving our products and its reliability. However, by any possibility, we would request user fail-safe design and post-aging treatment on system or equipment. ■ ■ 12/29 XC6701 Series ■ TEST CIRCUITS Circuit ① ●XC6701A/B Series ●XC6701D Series VIN A VOUT I OUT CIN=1uF (Ceramic) V CE CL=1uF (Ceramic) VSS V V VIN A VOUT Ishort I OUT V CIN=1uF (Ceramic) CL=1uF (Ceramic) VSS V Circuit ② ●XC6701A/B Series A A ●XC6701D Series VOUT VIN A OPEN VIN VOUT OPEN CIN=1uF CE VSS VSS CIN=1uF Circuit ③ ●XC6701A/B Series ●XC6701D Series VIN V ～ VIN VOUT CE CL=1uF VSS V ～ V ～ VOUT CL=1uF VSS V ～ 13/29 Ishort XC6701 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS (1) Output Voltage vs. Output Current XC6701A/B/D 182 2.0 VIN=VCE, CIN=CL =1.0μF (ceramic), Ta=25℃ 2.0 1.8 1.8 1.6 1.6 Output Voltage : VOUT (V) Output Voltage : VOUT (V) XC6701A/B/D 182 VIN=VCE=4.8V, CIN=CL =1.0μF (ceramic) 1.4 1.2 1.0 0.8 0.6 Ta=-40℃ Ta=25℃ Ta=85℃ 0.4 0.2 0.0 0 50 100 150 200 250 Output Current : I OUT (mA) 1.4 1.2 1.0 0.8 0.6 VIN=2.8V VIN=3.8V VIN=4.8V 0.4 0.2 0.0 300 0 50 100 150 200 250 Output Current : I OUT (mA) XC6701A/B/D 502 XC6701A/B/D 502 VIN=VCE=8.0V, CIN=CL =1.0μF (ceramic) 6.0 Output Voltage : VOUT (V) 5.0 Output Voltage : VOUT (V) VIN=VCE, CIN=CL =1.0μF (ceramic), Ta=25℃ 6.0 4.0 3.0 2.0 Ta=-40℃ Ta=25℃ Ta=85℃ 1.0 0.0 0 50 100 150 200 250 Output Current : I OUT (mA) 5.0 4.0 3.0 2.0 VIN=6V VIN=7V VIN=8V 1.0 0.0 300 0 50 100 150 200 250 Output Current : I OUT (mA) XC6701A/B/D C02 12.0 10.0 Output Voltage : VOUT (V) Output Voltage : V OUT (V) VIN=VCE, CIN=CL =1.0μF (ceramic), Ta=25℃ 14.0 12.0 Ta=-40℃ Ta=25℃ Ta=85℃ 8.0 6.0 4.0 10.0 VIN=13V VIN=14V VIN=15V 8.0 6.0 4.0 2.0 2.0 0.0 0.0 0 14/29 300 XC6701A/B/D C02 VIN=VCE=15.0V, CIN=CL =1.0μF (ceramic) 14.0 300 50 100 150 200 250 Output Current : I OUT (mA) 300 0 50 100 150 200 250 Output Current : I OUT (mA) 300 XC6701 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS (1) Output Voltage vs. Output Current (Continued) XC6701A/B/D J02 XC6701A/B/D J02 VIN=VCE=21.0, CIN=CL =1.0μF (ceramic) 20.0 18.0 16.0 Ta=-40℃ Ta=25℃ Ta=85℃ 14.0 12.0 Output Voltage : V OUT (V) Output Voltage : VOUT (V) VIN=VCE, CIN=CL =1.0μF (ceramic), Ta=25℃ 20.0 18.0 10.0 8.0 6.0 4.0 16.0 14.0 VIN=19V VIN=20V VIN=21V 12.0 10.0 8.0 6.0 4.0 2.0 2.0 0.0 0.0 0 50 100 150 200 250 Output Current : I OUT (mA) 300 0 50 100 150 200 250 Output Current : I OUT (mA) 300 (2) Output Voltage vs. Input Voltage XC6701A/B/D 182 XC6701A/B/D 182 VIN=VCE , Topr=25℃, CIN=CL =1.0μF(ceramic) 2.1 2.0 Output Voltage : VOUT (V) Output Voltage : VOUT (V) 2.1 1.9 1.8 1.7 IOUT=1mA IOUT=10mA IOUT=30mA 1.6 1.8 2.8 2.0 1.9 1.8 1.7 IOUT=1mA IOUT=10mA IOUT=30mA 1.6 1.5 0.8 VIN=VCE , Topr=25℃, CIN=CL =1.0μF(ceramic) 3.8 1.5 4 8 Input Voltage : VIN (V) 12 5.6 5.6 5.4 5.2 5.0 4.8 IOUT=1mA IOUT=10mA IOUT=30mA 4.0 Output Voltage : VOUT (V) Output Voltage : V OUT (V) 5.8 4.2 28 VIN=VCE , Topr=25℃, CIN=CL =1.0μF(ceramic) 6.0 5.8 4.4 24 XC6701A/B/D 502 XC6701A/B/D 502 4.6 20 Input Voltage : VIN (V) VIN=VCE , Topr=25℃, CIN=CL =1.0μF(ceramic) 6.0 16 5.4 5.2 5.0 4.8 4.6 IOUT=1mA IOUT=10mA IOUT=30mA 4.4 4.2 4.0 4.0 4.5 5.0 5.5 Input Voltage : VIN (V) 6.0 8 12 16 20 24 28 Input Voltage : VIN (V) 15/29 XC6701 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS (2) Output Voltage vs. Input Voltage XC6701A/B/D C02 XC6701A/B/D C02 VIN=VCE , Topr=25℃, CIN=CL =1.0μF(ceramic) 15.0 15.0 14.0 Output Voltage : VOUT (V) 14.0 Output Voltage : VOUT (V) VIN=VCE , Topr=25℃, CIN=CL =1.0μF(ceramic) 13.0 12.0 11.0 9.0 10 11 12 13 12.0 11.0 IOUT=1mA IOUT=10mA IOUT=30mA 10.0 IOUT=1mA IOUT=10mA IOUT=30mA 10.0 13.0 9.0 14 14 16 18 Input Voltage : VIN (V) 24 26 28 VIN=VCE , Topr=25℃, CIN=CL =1.0μF(ceramic) 21.0 20.0 Output Voltage : VOUT (V) 20.0 Output Voltage : V OUT (V) 22 XC6701A/B/D J02 XC6701A/B/D J02 VIN=VCE , Topr=25℃, CIN=CL =1.0μF(ceramic) 21.0 20 Input Voltage : VIN (V) 19.0 18.0 17.0 IOUT=1mA IOUT=10mA IOUT=30mA 16.0 19.0 18.0 17.0 IOUT=1mA IOUT=10mA IOUT=30mA 16.0 15.0 15.0 16 17 18 19 20 20 22 24 26 28 Input Voltage : VIN (V) Input Voltage : VIN (V) (3) Dropout Voltage vs. Output Current XC6701A//D 182 Ta=85℃ Ta=25℃ Ta=-40℃ 3.0 2.5 2.0 1.5 1.0 3.0 2.5 2.0 1.5 1.0 0.5 0.5 0.0 0.0 0 16/29 Ta=85℃ Ta=25℃ Ta=-40℃ 3.5 Dropout Voltage : VDIF (V) 3.5 VIN=VCE, CIN=CL=1.0μF(ceramic) 4.0 Output Voltage : VOUT (V) 4.0 Dropout Voltage : VDIF (V) XC6701A/B/D 502 VIN=VCE, CIN=CL=1.0μF(ceramic) 25 50 75 100 125 Output Current : IOUT (mA) 150 0 25 50 75 100 125 Output Current : IOUT (mA) 150 XC6701 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS (3) Dropout Voltage vs. Output Current (Continued) XC6701A/B/D C02 3.5 3.0 VIN=VCE, CIN=CL=1.0μF(ceramic) 4.0 3.5 2.5 2.0 1.5 1.0 0.5 12.5 Ta=85℃ Ta=25℃ Ta=-40℃ 3.0 12.4 Output Voltage : VOUT (V) Ta=85℃ Ta=25℃ Ta=-40℃ Dropout Voltage : VDIF (V) Dropout Voltage : VDIF (V) 4.0 XC6701A/B/D J02 VIN=VCE, CIN=CL=1.0μ F(ceramic) 2.5 2.0 1.5 1.0 0.5 0.0 0 25 50 75 100 125 Output Current : IOUT (mA) 0 25 50 75 100 125 Output Current : IOUT (mA) 70 70 60 60 30 Ta=85℃ Ta=25℃ Ta=-40℃ 20 10 0 0 4 8 12 16 20 Input Voltage : VIN (V) 24 40 30 20 10 70 60 60 Supply Current : ISS (uA) Supply Current : ISS (uA) 70 40 30 Ta=85℃ Ta=25℃ Ta=-40℃ 10 0 0 4 8 12 16 20 Input Voltage : VIN (V) -20 0 20 40 60 80 Ambient Temperature : Ta (℃) 100 XC6701A/B/D 502 XC6701A/B/D 502 20 VIN=3.8V 50 0 -40 28 50 24 28 12.0 11.9 11.8 11.7 -50 XC6701A/B/D 182 Supply Current : ISS (uA) Supply Current : ISS (uA) XC6701A/B/D 182 40 12.1 11.5 150 (4) Supply Current vs. Input Voltage 50 12.2 11.6 0.0 150 12.3 VIN=7.0V 50 40 30 20 10 0 -40 -20 0 20 40 60 80 Ambient Temperature : Ta (℃) 100 17/29 XC6701 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS (4) Supply Current vs. Input Voltage (Continued) XC6701A/B/D C02 70 70 60 60 Supply Current : ISS (uA) Supply Current : ISS (uA) XC6701A/B/D C02 50 40 30 20 Ta=85℃ Ta=25℃ Ta=-40℃ 10 0 4 0 20 16 12 8 Input Voltage : VIN (V) 24 VIN=14.0V 50 40 30 20 10 0 20 40 60 80 -40 -20 0 Ambient Temperature : Ta (℃) 28 XC6701A/B/D J02 70 70 60 60 Supply Current : ISS (uA) Supply Current : ISS (uA) XC6701A/B/D J02 50 40 30 20 Ta=85℃ Ta=25℃ Ta=-40℃ 10 0 4 0 20 16 12 8 Input Voltage : VIN (V) 100 24 VIN=20.0V 50 40 30 20 10 0 20 40 60 80 -40 -20 0 Ambient Temperature : Ta (℃) 28 100 (5) Output Voltage vs. Ambient Temperature XC6701A/B/D 182 XC6701A/B/D 502 VIN=VCE, CIN=CL=1.0μF(ceramic) 2.00 Output Voltage : VOUT (V) Output Voltage : VOUT (V) 1.95 1.90 1.85 1.80 1.75 IOUT=1mA 1.70 IOUT=10mA IOUT=20mA 1.65 1.60 5.15 5.10 5.05 5.00 4.95 IOUT=1mA IOUT=10mA IOUT=20mA 4.90 4.85 4.80 -50 18/29 VIN=VCE, CIN=CL=1.0μF(ceramic) 5.20 -25 0 25 50 75 Ambient Temperature : Ta (℃） 100 -50 -25 0 25 50 75 Ambient Temperature : Ta (℃） 100 XC6701 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS (5) Output Voltage vs. Ambient Temperature (Continued) XC6701A/B/D C02 VIN=VCE, CIN=CL=1.0μF(ceramic) 12.5 12.4 18.8 12.3 18.6 12.2 12.1 12.0 11.9 11.8 IOUT=1mA 11.7 IOUT=10mA 11.6 VIN=VCE, CIN=CL=1.0μF(ceramic) 19.0 Output Voltage : VOUT (V) Output Voltage : VOUT (V) XC6701A/B/D J02 IOUT=20mA 18.4 18.2 18.0 17.8 17.6 17.4 IOUT=1mA 17.2 IOUT=20mA IOUT=10mA 17.0 11.5 -50 -25 0 25 50 75 Ambient Temperature : Ta (℃） -50 100 -25 0 25 50 75 Ambient Temperature : Ta (℃） 100 (6) Input Transient Response Input Voltage 7.3 3.36 6.3 5.3 3.34 4.3 3.32 3.3 Output Voltage 3.30 2.3 3.28 1.3 3.26 Input Voltage: VIN (V) Input Voltage: VIN (V) 6.3 3.38 Output Voltage: VOUT (V) 7.3 XC6701A/B/D 332 IOUT=1mA, tr=tf=5μs CL=1.0μF (ceramic), Ta=25℃ IOUT=30mA, tr=tf=5μs CL=1.0μF (ceramic), Ta=25℃ 3.38 Input Voltage 3.36 5.3 3.34 4.3 3.32 3.3 Output Voltage 3.30 2.3 3.28 1.3 3.26 12.6 12.4 Output Voltage: VOUT (V) XC6701A/B/D 332 12.2 12.0 11.8 11.6 11.4 11.2 11.0 10.8 Time (1ms/div) XC6701A/B/D 502 9 5.06 8 7 5.04 6 5.02 5 5.00 Output Voltage 4 4.98 3 4.96 Input Voltage: VIN (V) Input Voltage 5.08 Output Voltage: VOUT (V) Input Voltage: VIN (V) 8 IOUT=1mA, tr=tf=5μs CL=1.0μF (ceramic), Ta=25℃ IOUT=30mA, tr=tf=5μs CL=1.0μF (ceramic), Ta=25℃ （8）入力立ち 5.08 Input Voltage 5.06 7 5.04 6 5.02 5 5.00 Output Voltage 4 4.98 3 4.96 Output Voltage: VOUT (V) XC6701A/B/D 502 9 10.6 Time (1ms/div) 8 6 4 2 0 -2 Time (1ms/div) -4 Time (1ms/div) -6 -8 19/29 XC6701 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS (6) Input Transient Response (Continued) XC6701A/B/D C02 12.06 15 14 12.04 13 12.02 12 Output Voltage 12.00 11 11.98 10 11.96 12.02 11 11.98 10 11.96 18.09 21 19 18.03 18.00 17 17.97 16 17.94 Input Voltage: VIN (V) 22 Output Voltage: VOUT (V) Input Voltage: VIN (V) 18.12 18.06 Output Voltage 12.00 5 0 -5 -10 -15 XC6701A/B/D J02 20 18 Output Voltage 10 Time (1ms/div) IOUT=1mA, tr=tf=5μs CL=1.0μF (ceramic), Ta=25℃ Input Voltage 12.06 13 XC6701A/B/D J02 21 Input Voltage 12.04 12 15 12.08 14 Time (1ms/div) 22 IOUT=30mA, tr=tf=5μs CL=1.0μF (ceramic), Ta=25℃ Output Voltage: VOUT (V) 16 IOUT=30mA, tr=tf=5μs CL=1.0μF (ceramic), Ta=25℃ Input Voltage 18.09 20 18.06 19 18.03 18 Output Voltage 18.00 17 17.97 16 17.94 Time (1ms/div) 20 18.12 16 Output Voltage: VOUT (V) Input Voltage 12.08 Input Voltage: VIN (V) Input Voltage: VIN (V) 15 XC6701A/B/D C02 Output Voltage: VOUT (V) 16 IOUT=1mA, tr=tf=5μs CL=1.0μF (ceramic), Ta=25℃ 12 8 4 0 -4 -8 -12 -16 -20 Time (1ms/div) (7) Load Transient Response XC6701A/B/D 332 XC6701A/B/D 502 VIN=7.0V, tr=tf=5μs CIN=CL=1.0μF (ceramic), Ta=25℃ 150 5.4 3.2 120 Output Voltage 3.1 3.0 60 2.9 2.8 2.7 Output Current 2.6 30 6 5.2 120 5.1 5.0 4.9 90 Output Voltage 4.8 60 4.7 4.6 4.5 0 Time (1ms/div) 20/29 90 Output Voltage: VOUT (V) 3.4 3.3 8 5.3 Output Current: IOUT (mA) Output Voltage: VOUT (V) 3.5 150 Output Current 4.4 30 0 Time (1ms/div) Output Current: IOUT (mA) 3.6 VIN=5.3V, tr=tf=5μs CIN=CL=1.0μF (ceramic), Ta=25℃ 4 2 0 -2 -4 -6 -8 XC6701 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS (7) Load Transient Response (Continued) XC6701A/B/D C02 VIN=14.0V, tr=tf=5μs CIN=CL=1.0μF (ceramic), Ta=25℃ 12.6 XC6701A/B/D J02 150 18.6 150 120 12.0 11.8 Output Voltage 11.6 11.4 90 60 11.2 11.0 Output Current 10.8 10.6 30 18.2 17.8 Output Voltage 90 17.6 17.4 60 17.2 17.0 16.8 0 120 18.0 30 Output Current 16.6 Time (1ms/div) Output Current: IOUT (mA) 12.2 Output Voltage: VOUT (V) 18.4 Output Current: IOUT (mA) Output Voltage: VOUT (V) 12.4 VIN=20.0V, tr=tf=5μs CIN=CL=1.0μF (ceramic), Ta=25℃ 0 Time (1ms/div) (8) Rising Response Time XC6701A/B 332 XC6701A/B 332 Input Voltage 7 6 6 2 5 0 4 -2 3 Output Voltage -4 2 -6 -8 4 0 4 -2 3 Output Voltage 2 1 -6 1 0 -8 0 XC6701A/B 502 XC6701A/B 502 8 6 7 6 Output Voltage 5 2 Input Voltage 0 -5 -10 -15 8 7 6 Output Voltage 5 0 4 -2 3 -4 2 1 4 -2 3 -4 2 -6 1 -6 0 -8 Time (1ms/div) IOUT=30mA, CL =1μF (ceramic), Ta=25℃ 4 0 -8 5 VIN=7.0V, tr=5μs 8 Input Voltage: VIN (V) Input Voltage 6 5 Time (1ms/div) 4 2 Input Voltage -4 Output Voltage: VOUT (V) Input Voltage: VIN (V) 6 10 7 Time (1ms/div) IOUT=1mA, CL =1μF (ceramic), Ta=25℃ 15 8 2 VIN=7.0V, tr=5μs 8 VIN=5.3V, tr=5μs IOUT=30mA, CL =1μF (ceramic), Ta=25℃ Output Voltage: VOUT (V) 4 8 Input Voltage: VIN (V) Input Voltage: VIN (V) 6 8 Output Voltage: VOUT (V) 8 IOUT=1mA, CL =1μF (ceramic), Ta=25℃ Output Voltage: VOUT (V) VIN=5.3V, tr=5μs 0 Time (1ms/div) 21/29 XC6701 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS (8) Rising Response Time (Continued) XC6701A/B C02 XC6701A/B C02 VIN=14.0V, tr=5μs IOUT=30mA, CL=1μF (ceramic), Ta=25℃ 18 15 15 10 Output Voltage 12 0 9 -5 6 -10 3 -15 0 Input Voltage: VIN (V) 5 Output Voltage: VOUT (V) Input Voltage: VIN (V) 10 5 9 -5 6 -10 3 -15 0 Time (1ms/div) XC6701A/B J02 XC6701A/B J02 20 18 16 12 16 12 8 14 4 12 -4 10 8 Input Voltage: VIN (V) 20 16 Output Voltage: VOUT (V) Input Voltage: VIN (V) 20 Input Voltage 12 Output Voltage 0 VIN=20.0V, tr=5μs IOUT=1mA, CL=1μF (ceramic), Ta=25℃ 0 15 Time (1ms/div) Output Voltage 18 Input Voltage Input Voltage 70 60 50 40 30 20 10 0 0.01 Output Voltage 20 90 18 80 16 14 4 12 10 Input Voltage -4 8 -8 6 -12 4 -8 6 -12 4 -16 2 -16 2 -20 0 -20 0 Time (1ms/div) 80 VIN=20.0V, tr=5μs IOUT=30mA, CL=1μF (ceramic), Ta=25℃ 8 0 90 Output Voltage: VOUT (V) 15 Output Voltage: VOUT (V) VIN=14.0V, tr=5μs IOUT=1mA, CL=1μF (ceramic), Ta=25℃ 70 60 50 40 30 20 10 0 0.01 Time (1ms/div) (9) CE Rising Response Time 90 XC6701A/B 332 7 6 6 2 5 0 4 -2 Output Voltage 3 -4 2 -6 -8 Time (1ms/div) 22/29 4 8 7 CE Input Voltage 6 2 5 0 4 -2 Output Voltage 3 -4 2 1 -6 1 0 -8 0 Time (1ms/div) Output Voltage: VOUT (V) CE Input Voltage 8 CEInput Voltage: VCE (V) CEInput Voltage: VCE (V) 6 4 VIN=5.3V, tr=5μs IOUT=30mA, CL=1μF (ceramic), Ta=25℃ 8 Output Voltage: VOUT (V) 8 XC6701A/B 332 VIN=5.3V, tr=5μs IOUT=1mA, CL=1μF (ceramic), Ta=25℃ Output Voltage 80 90 70 80 60 70 50 60 40 50 30 40 20 30 10 20 0 10 0.01 0 0.01 XC6701 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS (9) CE Rising Response Time (Continued) XC6701A/B 502 XC6701A/B 502 CE Input Voltage 4 6 2 5 Output Voltage CE Input Voltage 6 7 CEInput Voltage: VCE (V) 4 2 7 80 5 Output Voltage 0 4 -2 3 -4 2 0 4 -2 3 -4 2 -6 1 -6 1 -8 0 -8 0 18 15 5 12 0 9 -5 6 -10 3 CEInput Voltage: VCE (V) 15 Output Voltage: VOUT (V) 10 10 Output Voltage 9 -5 6 -10 3 XC6701A/B J02 XC6701A/B J02 16 16 12 14 4 12 0 10 8 -8 6 -12 4 -16 -20 CEInput Voltage: VCE (V) 20 18 Output Voltage: VOUT (V) 20 16 Time (1ms/div) 10 0 0.01 VIN=20.0V, tr=5μs IOUT=30mA, CL=1μF (ceramic), Ta=25℃ 20 CE Input Voltage 20 0 Time (1ms/div) 8 12 0 -15 0 Output Voltage 30 18 15 5 VIN=20.0V, tr=5μs IOUT=1mA, CL=1μF (ceramic), Ta=25℃ -4 CE Input Voltage Time (1ms/div) 12 40 VIN=14.0V, tr=5μs IOUT=30mA, CL=1μF (ceramic), Ta=25℃ CE Input Voltage -15 50 XC6701A/B C02 VIN=14.0V, tr=5μs IOUT=1mA, CL=1μF (ceramic), Ta=25℃ Output Voltage 60 Output Voltage: VOUT (V) 15 70 Time (1ms/div) XC6701A/B C02 CEInput Voltage: VCE (V) 90 6 Time (1ms/div) CEInput Voltage: VCE (V) 8 20 Output Voltage 18 16 8 14 4 12 0 -4 CE Input Voltage 10 8 -8 6 -12 4 2 -16 2 0 -20 Output Voltage: VOUT (V) 6 CEInput Voltage: VCE (V) 8 8 Output Voltage: VOUT (V) 8 VIN=7.0V, tr=5μs IOUT=30mA, CL=1μF (ceramic), Ta=25℃ Output Voltage: VOUT (V) VIN=7.0V, tr=5μs IOUT=1mA, CL=1μF (ceramic), Ta=25℃ 0 Time (1ms/div) 23/29 XC6701 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS (10) Ripple Rejection Rate 90 XC6701A/B/D 332 VIN=VCE=5.3Vdc+0.5Vp-p, IOUT=1mA CL=1μF(ceramic),Topr=25℃ Ripple Rejection Rate: PSRR (dB) Ripple Rejection Rate: PSRR (dB) XC6701A/B/D 332 80 70 60 50 40 30 20 10 0 0.01 0.1 1 10 Ripple Frequency: f (kHz) 100 90 80 70 60 50 40 30 20 10 0 0.01 80 70 60 50 40 30 20 10 0 0.01 0.1 1 10 Ripple Frequency: f (kHz) 100 90 Ripple Rejection Rate: PSRR (dB) Ripple Rejection Rate: PSRR (dB) 70 60 50 40 30 20 10 24/29 0.1 1 10 Ripple Frequency: f (kHz) VIN=VCE=7.0Vdc+0.5Vp-p, IOUT=30mA CL=1μF(ceramic),Topr=25℃ 70 60 50 40 30 20 10 0 0.01 0.1 1 10 Ripple Frequency: f (kHz) 100 XC6701A/B/D C02 VIN=VCE=14.0Vdc+0.5Vp-p, IOUT=1mA CL=1μF(ceramic),Topr=25℃ 80 0 0.01 100 80 XC6701A/B/D C02 90 0.1 1 10 Ripple Frequency: f (kHz) XC6701A/B/D 502 VIN=VCE=7.0Vdc+0.5Vp-p, IOUT=1mA CL=1μF(ceramic),Topr=25℃ Ripple Rejection Rate: PSRR (dB) Ripple Rejection Rate: PSRR (dB) XC6701A/B/D 502 90 VIN=VCE=5.3Vdc+0.5Vp-p, IOUT=30mA CL=1μF(ceramic),Topr=25℃ 100 90 VIN=VCE=14.0Vdc+0.5Vp-p, IOUT=30mA CL=1μF(ceramic),Topr=25℃ 80 70 60 50 40 30 20 10 0 0.01 0.1 1 10 Ripple Frequency: f (kHz) 100 XC6701 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS (10) Ripple Rejection Rate (Continued) 90 XC6701A/B/D J02 VIN=VCE=14.0Vdc+0.5Vp-p, IOUT=1mA CL=1μF(ceramic),Topr=25℃ Ripple Rejection Rate: PSRR (dB) Ripple Rejection Rate: PSRR (dB) XC6701A/B/D J02 80 70 60 50 40 30 20 10 0 0.01 0.1 1 10 Ripple Frequency: f (kHz) 100 90 VIN=VCE=14.0Vdc+0.5Vp-p, IOUT=30mA CL=1μF(ceramic),Topr=25℃ 80 70 60 50 40 30 20 10 0 0.01 0.1 1 10 Ripple Frequency: f (kHz) 100 25/29 XC6701 Series ■PACKAGING INFORMATION For the latest package information go to, www.torexsemi.com/technical-support/packages PACKAGE OUTLINE / LAND PATTERN THERMAL CHARACTERISTICS SOT-223 SOT-223 PKG SOT-223 Power Dissipation SOT-25 SOT-25 PKG SOT-25 Power Dissipation SOT-89 SOT-89 PKG SOT-89 Power Dissipation SOT-89-5 SOT-89-5 PKG SOT-89-5 Power Dissipation TO-252 TO-252 PKG TO-252 Power Dissipation USP-6C USP-6C PKG USP-6C Power Dissipation 26/29 XC6701 Series ■MARKING RULE (mark header：①～③) *Mark header does not change with a lot. ① represents product series SOT-25 MARK PRODUCT SERIES 8 XC6701****** 5 4 ① ② represents type of regulators and output voltage A 12.1～15.0 B 15.1～18.0 4 1.8～3.0 5 3.1～6.0 6 7 D 6.1～9.0 9.1～12.0 C 12.1～15.0 D 15.1～18.0 XC6701 A/B***** ⑤ 6.1～9.0 9.1～12.0 ④ A/B 1 2 3 XC6701D***** SOT-89-5 5 2 4 ⑤ 3 ④ 3.1～6.0 2 ③ 1 SOT-89 ② 1.8～3.0 3 ① 0 ⑤ PRODUCT SERIES ③ OUTPUT VOLTAGE (V) ④ 2 ② TYPE 1 ③ ① MARK ② 1 2 3 SOT-223 ① 1 ② 2 ③ ④ ⑤ 3 27/29 XC6701 Series ■MARKING RULE (Continued) ③ represents output voltage MARK TO-252 OUTPUT VOLTAGE(V) 12.1 15.1 1 - 3.2 6.2 9.2 12.2 15.2 2 - 3.3 6.3 9.3 12.3 15.3 3 - 3.4 6.4 9.4 12.4 15.4 4 - 3.5 6.5 9.5 12.5 15.5 5 - 3.6 6.6 9.6 12.6 15.6 6 - 3.7 6.7 9.7 12.7 15.7 7 - 3.8 6.8 9.8 12.8 15.8 8 - 3.9 6.9 9.9 12.9 15.9 9 - 4.0 7.0 10.0 13.0 16.0 A - 4.1 7.1 10.1 13.1 16.1 B - 4.2 7.2 10.2 13.2 16.2 C - 4.3 7.3 10.3 13.3 16.3 D - 4.4 7.4 10.4 13.4 16.4 E - 4.5 7.5 10.5 13.5 16.5 F - 4.6 7.6 10.6 13.6 16.6 H - 4.7 7.7 10.7 13.7 16.7 K 1.8 4.8 7.8 10.8 13.8 16.8 L 1.9 4.9 7.9 10.9 13.9 16.9 M 2.0 5.0 8.0 11.0 14.0 17.0 N 2.1 5.1 8.1 11.1 14.1 17.1 P 2.2 5.2 8.2 11.2 14.2 17.2 R 2.3 5.3 8.3 11.3 14.3 17.3 S 2.4 5.4 8.4 11.4 14.4 17.4 T 2.5 5.5 8.5 11.5 14.5 17.5 U 2.6 5.6 8.6 11.6 14.6 17.6 V 2.7 5.7 8.7 11.7 14.7 17.7 X 2.8 5.8 8.8 11.8 14.8 17.8 Y 2.9 5.9 8.9 11.9 14.9 17.9 Z 3.0 6.0 9.0 12.0 15.0 18.0 ① ② ④ ⑤ ③ 2 1 3 USP-6C 1 2 6 5 ③ 9.1 ② 6.1 ① 3.1 ⑤ - ④ 0 3 ④⑤ represents production lot number 01, …, 09, 10, 11, …, 99, 0A, …, 0Z, 1A, …, 9Z, A0, …, Z9, AA, …, ZZ repeated. (G, I, J, O, Q, W excluded) *No character inversion used. 製造ロットを表す。01、…、09、10、11、…、99、0A、…、0Z、1A、…、9Z、A0、…、Z9、AA、 …、ZZ を順番とする。(但し、G，I，J，O，Q，W は除く。反転文字は使用しない。) 28/29 4 XC6701 Series 1. The product and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this datasheet is up to date. 2. The information in this datasheet is intended to illustrate the operation and characteristics of our products. We neither make warranties or representations with respect to the accuracy or completeness of the information contained in this datasheet nor grant any license to any intellectual property rights of ours or any third party concerning with the information in this datasheet. 3. Applicable export control laws and regulations should be complied and the procedures required by such laws and regulations should also be followed, when the product or any information contained in this datasheet is exported. 4. The product is neither intended nor warranted for use in equipment of systems which require extremely high levels of quality and/or reliability and/or a malfunction or failure which may cause loss of human life, bodily injury, serious property damage including but not limited to devices or equipment used in 1) nuclear facilities, 2) aerospace industry, 3) medical facilities, 4) automobile industry and other transportation industry and 5) safety devices and safety equipment to control combustions and explosions. Do not use the product for the above use unless agreed by us in writing in advance. 5. Although we make continuous efforts to improve the quality and reliability of our products; nevertheless Semiconductors are likely to fail with a certain probability. So in order to prevent personal injury and/or property damage resulting from such failure, customers are required to incorporate adequate safety measures in their designs, such as system fail safes, redundancy and fire prevention features. 6. Our products are not designed to be Radiation-resistant. 7. Please use the product listed in this datasheet within the specified ranges. 8. We assume no responsibility for damage or loss due to abnormal use. 9. All rights reserved. No part of this datasheet may be copied or reproduced unless agreed by Torex Semiconductor Ltd in writing in advance. TOREX SEMICONDUCTOR LTD. 29/29