XC6702DD61ER-G

XC6702 Series ETR03074-005b 36V input, 300mA low supply current, high speed voltage regulators ■GENERAL DESCRIPTION The XC6702 series are CMOS high-speed voltage regulator ICs with a 36 V input and low supply current. Internal circuitry includes a reference voltage supply, error amplifier, driver transistor, over-current protection circuit, overheat protection circuit, soft start circuit, and phase compensation circuit. The output voltage is fixed internally by laser trimming, and product selections from 1.8V to 18.0V are available. The over-current protection circuit and overheat protection circuit are built-in, and when the output current reaches the current limit or the junction temperature reaches the temperature limit, the corresponding circuit activates. The soft start circuit limits the rush current that flows from VIN to VOUT when the IC starts, enabling a stable startup sequence. The IC is put in the standby state by inputting L level into the CE pin, and the supply current is reduced to 0.1μA. A low-ESR capacitor such as a ceramic capacitor can also be used for CL. ■APPLICATIONS ■ FEATURES ● Industrial equipment Input voltage range : 4.5V to 36.0V Peak voltage Output current Output voltage range : 46.0V (Transient≦400ms) : 300mA : 1.8V to 18.0V (accuracy ±1%) VOUT < 6.0V, 0.1V step settings VOUT ≥ 6.0V, 0.5V step settings :±50ppm/℃ (TYP.) (absolute maximum rating 42.0V) ● Domestic electrical appliances ● Portable AV devices ● Various modules Output voltage temperature characteristics Supply current Dropout voltage Ripple rejection ratio Standby current Protection function Addition function Output capacitor Package Environment friendly features ■ TYPICAL APPLICATION CIRCUIT Typical standard circuit : 40μA (TYP.) : 350mV@ IOUT =100mA,VOUT=5.0V : 65dB @1kHz : 0.1μA : Current limit,Short Protection Thermal shutdown : Soft start ON/OFF (Active High) : Ceramic capacitor (2.2μF) : USP-6C, SOT-89-5, SOP-8FD : EU RoHS Directive compliant, lead free ■TYPICAL PERFORMANCE CHARACTERISTICS Load Transient Response Example of typical characteristics XC6702 series (VOUT=5.0V) VIN VOUT CE CIN=1.0μF (Ceramic) VSS CL=2.2μF (Ceramic) Our products are not designed to be Radiation-resistant. Output Voltage : VOUT (V) INPUT 5.15 5.10 5.05 5.00 4.95 4.90 4.85 4.80 4.75 4.70 4.65 VIN=VCE=6.0V CIN=1.0μF (ceramic) 150 Output Voltage 120 CL=2.2μF CL=10μF CL=47μF Output Current 1mA⇔30mA Time (500μs/div) 90 60 30 0 1/27 XC6702 Series ■BLOCK DIAGRAM VIN Voltage Reference -Error Amp + Current Limit Thermal Shutdown Soft Start VOUT R1 CE ON/OFF Control CE each circuit CEB R2 VSS *The above diodes are diodes for electrostatic protection and parasitic diodes. ■PRODUCT CLASSIFICATION 1) Ordering Information XC6702①②③④⑤⑥-⑦(*1) DESIGNATOR ITEM SYMBOL ① Type D DESCRIPTION Current Limit, Thermal Shutdown, Soft Start, ON/OFF Control For the voltage within 1.8V~9.5V： e.g. 3.3V → ②=3, ③=3 5.0V → ②=5, ③=0 Output ②③ Voltage(*2) 18 ~ J0(*3) For the voltage within 10.0V~18.0V： e.g. 10.0V → ②=A, ③=0 12.5V → ②=C, ③=5 18.0V → ②=J, ③=0 Output Voltage Accuracy ④ Packages (Order Unit) ⑤⑥-⑦ 1 ±1% ER-G USP-6C (3,000pcs/Reel) PR-G SOT-89-5 (1,000pcs/Reel) QR-G SOP-8FD (1,000pcs/Reel) (*1) “-G” indicates halogen and antimony free, as well as EU RoHS compliant. Output voltage setting steps are as follows: VOUT ＜ 6.0V 0.1V-step settings VOUT ≧ 6.0V 0.5V-step settings For other voltages, please contact your local Torex sales office or representative. (*3) For 10.0V to 18.0V, A to J excluding I are used in "②". (*2) 2) Selection Guide 2/27 TYPE CURRENT LIMTTER THERMAL SHUTDOWN SOFT START ON/OFF CONTROL D Yes Yes Yes Yes XC6702 Series ■PIN CONFIGURATION NC VIN 5 VIN　6 1　VOUT NC　5 2　NC VSS　4 3　CE USP-6C (BOTTOM VIEW) 2 4 1 2 3 VOUT VSS CE VOUT 1 8 VIN NC 2 7 NC NC 3 6 VSS CE 4 5 NC SOP-8FD (TOP VIEW ) SOT-89-5 (TOP VIEW) * For mounting strength reinforcement and heat radiation of the USP-6C and SOP-8FD radiator plates, it is recommended that soldering be performed according to the reference pattern layout and reference metal mask design. To fix the voltage of the radiator plate, connect to VSS (Pin 4 of USP-6C or Pin 6 of SOP-8FD). ■PIN ASSIGNMENT PIN NUMBER PIN NAME FUNCTIONS 1 VOUT Output 4 2,3,5,7 NC No Connection 3 3 4 CE ON/OFF Control 4 2 6 VSS Ground 6 5 8 VIN Power Input USP-6C SOT-89-5 SOP-8FD 1 1 2,5 ■PIN FUNCTION ASSIGNMENT PIN NAME CE SIGNAL STATUS L Stand-by H Active OPEN Unstable * Avoid leaving the CE pin open; set to any fixed voltage. 3/27 XC6702 Series ■ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNITS Input Voltage VIN -0.3 ~ 42.0 V (*1) Output Current IOUT Output Voltage VOUT -0.3 ~ VIN + 0.3 or 42.0(*2) 600 mA V CE Input Voltage VCE -0.3 ~ 42.0 V 120 (IC only) 1000 (40mm x 40mm Standard board)(*3) USP-6C 1250 (JESD51-7 board)(*3) Power Dissipation (Ta=25℃) 500 (IC only) SOT-89-5 Pd 1300 (40mm x 40mm Standard board)(*3) mW 1750 (JESD51-7 board)(*3) 300 (IC only) SOP-8FD 1500 (40mm x 40mm Standard board)(*3) 2500 (JESD51-7 board)(*3) Surge Voltage VSURGE 46.0(*4) V Operating Ambient Temperature Topr -40 ~ 105 ℃ Junction Temperature Tj -40 ~ 125 ℃ Storage Temperature Tstg -55 ~ 125 ℃ All voltage ratings are relative to VSS. (*1) Use with IOUT less than Pd/(VIN-VOUT). (*2) The maximum value is the lower of VIN + 0.3V and 42.0V (*3) The power dissipation figure shown is PCB mounted and is for reference only. Please refer to PACKAGING INFORMATION for the mounting condition (*4) 4/27 Transient ≦ 400ms XC6702 Series ■ELECTRICAL CHARACTERISTICS PARAMETER Input Voltage SYMBOL VIN -40℃≦Ta≦105℃(*6) Ta=25℃ CONDITIONS MIN. TYP. MAX. MIN. TYP. MAX. 4.5 - 36.0 4.5 - 36.0 ×0.99 VOUT(T)(*2) ×1.01 ×0.96 VOUT(T)(*2) ×1.04 UNITS CIRCUIT V ① V ① VOUT(E) (*1) IOUT=10mA Quiescent Current ISS IOUT=0mA - 40 80 - 40 90 μA ② Stand-by Current ISTB VIN=36.0V,VCE=VSS - 0.01 0.10 - 0.01 2.10 μA ③ 300 - - 300 - - mA ① mV ① mV ① Output Voltage Maximum Output Current(*3) IOUTMAX VIN=VOUT(T)+2.0V VOUT(T)≦5.0V Load Regulation ΔVOUT Dropout Voltage Vdif (*4) VIN=VOUT(T)+2.0V 0.1mA≦IOUT≦300mA - 60 85 VOUT(T)>5.0V 60 Line Regulation Output Voltage Temperature Characteristics ΔVOUT/ (ΔVIN・VOUT) VOUT(T)≦5.0V - 130 230 VOUT(T)>5.0V 60 - VOUT(T)+0.5V≦VIN≦36.0V - 0.01 0.03 - 0.01 0.03 %/V ① - ±50 - - ±50 - ppm /℃ ① - 65 - - 65 - dB ④ 370 460 - 310 460 - mA ① - 115 - - 115 - mA ① ΔVOUT/ - 275 IOUT=100mA (ΔTopr・VOUT) 60 VIN=VOUT(T)+1.0VDC+0.5Vp-pAC Ripple Rejection Ratio PSRR IOUT=10mA, f=1kHz CIN Unconnected Limit Current(*3) ILIM Short - Circuit Current ISHORT Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Thermal Shutdown Hysteresis Width Soft-Start Time(*5) VIN=VOUT(T)+2.0V VOUT=VOUT(E)×0.95 VOUT=VSS TTSD Junction Temperature - 150 - - 150 - ℃ ① TTSR Junction Temperature - 140 - - 140 - ℃ ① TTSD-TTSR Junction Temperature - 10 - - 10 - ℃ ① VCE=0V→VIN - 370 890 - 370 1100 μs ⑤ mA ⑤ tSS VOUT(T)≦3.3V 55 Inrush Current IRUSH VCE=0V→VIN - 3.3V＜VOUT(T)≦5.0V 70 VOUT(T)≦3.3V 95 135 55 - 155 3.3V＜VOUT(T)≦5.0V 70 215 VOUT(T)＞5.0V VOUT(T)＞5.0V 125 210 125 330 CE "H" Level Voltage VCEH 2.5 - 36.0 2.5 - 36.0 V ⑥ CE "L" Level Voltage VCEL VSS - 1.2 VSS - 1.2 V ⑥ CE "H" Level Current ICEH VCE=VIN=36.0V -0.10 - 0.10 -0.10 - 0.10 μA ⑥ CE "L" Level Current ICEL VIN=36.0V,VCE=VSS -0.10 - 0.10 -0.10 - 0.10 μA ⑥ VIN=VOUT(T) + 1.0V, VCE=VIN , IOUT =1mA , CIN=1.0μF , CL=2.2μF unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (*1) VOUT(E) : Actual output voltage value. (*2) VOUT(T) : Set output voltage value. (*3) Differences in heat dissipation when mounted may cause activation of thermal shutdown circuit, preventing attainment of maximum output current. (*4) Vdif is defined as follows: Vdif＝{VIN1－VOUT1}. VIN1 : As input voltage is gradually reduced, the input voltage at which VOUT1 is output. VOUT1 : 98% of output voltage when VIN is input after stabilizing sufficiently at IOUT=100mA . (*5) Time from input of voltage higher than CE "H" level voltage into CE pin until output voltage is VOUT(T)×0.9V or higher. (*6) The values under -40℃≦Ta≦105℃ has been tested and guaranteed by design engineering. 5/27 XC6702 Series ■ELECTRICAL CHARACTERISTICS (Continued) Voltage Chart 1 NOMINAL OUTPUT VOLTAGE Output Voltage VOUT(E) (V) Ta=25℃ -40℃≦Ta≦105℃ NOMINAL OUTPUT VOLTAGE Output Voltage VOUT(E) (V) Ta=25℃ -40℃≦Ta≦105℃ VOUT(T) (V) MIN. MAX. MIN. MAX. VOUT(T) (V) MIN. MAX. MIN. MAX. 1.8 1.782 1.818 1.728 1.872 5.1 5.049 5.151 4.896 5.304 1.9 1.881 1.919 1.824 1.976 5.2 5.148 5.252 4.992 5.408 2.0 1.980 2.020 1.920 2.080 5.3 5.247 5.353 5.088 5.512 2.1 2.079 2.121 2.016 2.184 5.4 5.346 5.454 5.184 5.616 2.2 2.178 2.222 2.112 2.288 5.5 5.445 5.555 5.280 5.720 2.3 2.277 2.323 2.208 2.392 5.6 5.544 5.656 5.376 5.824 2.4 2.376 2.424 2.304 2.496 5.7 5.643 5.757 5.472 5.928 2.5 2.475 2.525 2.400 2.600 5.8 5.742 5.858 5.568 6.032 2.6 2.574 2.626 2.496 2.704 5.9 5.841 5.959 5.664 6.136 2.7 2.673 2.727 2.592 2.808 6.0 5.940 6.060 5.760 6.240 2.8 2.772 2.828 2.688 2.912 6.5 6.435 6.565 6.240 6.760 2.9 2.871 2.929 2.784 3.016 7.0 6.930 7.070 6.720 7.280 3.0 2.970 3.030 2.880 3.120 7.5 7.425 7.575 7.200 7.800 3.1 3.069 3.131 2.976 3.224 8.0 7.920 8.080 7.680 8.320 3.2 3.168 3.232 3.072 3.328 8.5 8.415 8.585 8.160 8.840 3.3 3.267 3.333 3.168 3.432 9.0 8.910 9.090 8.640 9.360 3.4 3.366 3.434 3.264 3.536 9.5 9.405 9.595 9.120 9.880 3.5 3.465 3.535 3.360 3.640 10.0 9.900 10.100 9.600 10.400 3.6 3.564 3.636 3.456 3.744 10.5 10.395 10.605 10.080 10.920 3.7 3.663 3.737 3.552 3.848 11.0 10.890 11.110 10.560 11.440 3.8 3.762 3.838 3.648 3.952 11.5 11.385 11.615 11.040 11.960 3.9 3.861 3.939 3.744 4.056 12.0 11.880 12.120 11.520 12.480 4.0 3.960 4.040 3.840 4.160 12.5 12.375 12.625 12.000 13.000 4.1 4.059 4.141 3.936 4.264 13.0 12.870 13.130 12.480 13.520 4.2 4.158 4.242 4.032 4.368 13.5 13.365 13.635 12.960 14.040 4.3 4.257 4.343 4.128 4.472 14.0 13.860 14.140 13.440 14.560 4.4 4.356 4.444 4.224 4.576 14.5 14.355 14.645 13.920 15.080 4.5 4.455 4.545 4.320 4.680 15.0 14.850 15.150 14.400 15.600 4.6 4.554 4.646 4.416 4.784 15.5 15.345 15.655 14.880 16.120 4.7 4.653 4.747 4.512 4.888 16.0 15.840 16.160 15.360 16.640 4.8 4.752 4.848 4.608 4.992 16.5 16.335 16.665 15.840 17.160 4.9 4.851 4.949 4.704 5.096 17.0 16.830 17.170 16.320 17.680 5.0 4.950 5.050 4.800 5.200 17.5 17.325 17.675 16.800 18.200 18.0 17.820 18.180 17.280 18.720 6/27 XC6702 Series ■ELECTRICAL CHARACTERISTICS (Continued) Voltage Chart 2 Dropout Voltage Vdif (mV) (IOUT =100mA) NOMINAL OUTPUT VOLTAGE Ta=25℃ NOMINAL OUTPUT VOLTAGE -40℃≦Ta≦105℃ Ta=25℃ VOUT(T) (V) TYP. MAX. TYP. MAX. VOUT(T) (V) 1.8 1480 2700 1480 2700 5.0 1.9 1440 2600 1440 2600 5.1 2500 5.2 2400 5.3 2300 5.4 2200 5.5 2100 5.6 2000 5.7 1900 5.8 1800 5.9 1700 6.0 1600 6.5 1500 7.0 1400 7.5 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 1230 1090 1030 670 460 3.0 3.1 2500 2400 2300 2200 2100 2000 1900 1800 1700 1600 1230 1090 1030 670 460 1500 450 1400 450 3.2 1300 1300 8.0 3.3 1200 1200 8.5 3.4 1100 1100 9.0 3.5 1000 1000 9.5 3.6 900 10.0 3.7 800 10.5 3.8 700 11.0 3.9 600 11.5 4.0 4.1 430 430 TYP. MAX. TYP. MAX. 350 440 350 810 12.5 900 4.3 4.5 -40℃≦Ta≦105℃ 12.0 4.2 4.4 Dropout Voltage Vdif (mV) (IOUT =100mA) 530 13.0 13.5 14.0 14.5 4.6 15.0 4.7 15.5 4.8 16.0 4.9 16.5 17.0 17.5 18.0 7/27 XC6702 Series ■TEST CIRCUITS CIRCUIT① VIN VOUT A CE V V VSS CIN RL CL CIRCUIT② A VIN VOUT CE V VSS CIRCUIT③ A VIN VOUT CE V VSS CIRCUIT④ VIN ～ V ～ VOUT CE V ～ VSS 8/27 A CL RL XC6702 Series ■TEST CIRCUITS(Continued) CIRCUIT⑤ Waveform measure IRUSH VIN A ～ Waveform measure Waveform measure VOUT A CE V V ～ V ～ VSS CIN Voltage [V] Current [mA] RL CL VCE 0V→VIN CE“H”Level Voltage VOUT VOUT(T)×0.9Ｖ IIN IRUSH Time[μs] tSS CIRCUIT⑥ VIN A CE A V VOUT V CIN V VSS RL CL 9/27 XC6702 Series ■OPERATIONAL EXPLANATION The XC6702 series controls the output voltage by means of a scheme in which the error amplifier compares the voltage divided by R1 and R2 connected to the VOUT pin with the voltage of the internal reference power supply. The output signal from the error amplifier makes the driver transistor connected to the VIN pin drive, and negative feedback is applied to stabilize the output voltage. VIN Voltage Reference -Error Amp + Soft Start Current Limit Thermal Shutdown VOUT R1 CE CE ON/OFF Control each circuit CEB R2 VSS XC6702 Series D Type ＜Current limiting, short-circuit protection＞ The XC6702 series incorporates a foldback circuit for current limiting (460mA TYP.) and short-circuit protection (115mA TYP.). When the output current reaches the current limit, the output voltage falls and the output current is limited. ＜Overheating protection＞ The XC6702 series incorporates a thermal shutdown circuit for overheating protection. When the junction temperature reaches the detection temperature (150℃ TYP.), the driver transistor is forcibly turned off. When the junction temperature falls to the release temperature (140℃ TYP.) while the driver transistor remains in the off state, the driver transistor turns on (auto recovery) and regulation restarts. Unless the cause of rising temperature is removed, the driver transistor repeats on and off, and output waveform would be like consecutive pulses. ＜CE pin＞ The XC6702 series allows stopping of the IC internal circuit by a CE pin signal. When the IC is in the stopped state by CE "L" level voltage input, the VOUT pin is pulled down by R1 and R2 to the VSS level. As long as the voltage input into the CE pin is within the CE pin voltage specification, the logic is established and there is no interference with operation. If the CE pin is left open, operation is unspecified. 10/27 XC6702 Series ■OPERATIONAL EXPLANATION (Continued) ＜Soft start＞ The XC6702 series limits the rush current (IRUSH) that suddenly flows from VIN to VOUT to charge the output capacitor (CL) when the IC starts, and is also able to limit fluctuations of VIN due to IRUSH. The soft start time (tss) is optimized internally (370μs TYP.). The soft start time (tss) is defined as the VOUT reaches 90% of VOUT(T) from the time when CE H threshold is input to the CE pin. XC6702D501PR-G VCE 0V→VIN VOUT VOUT(T)×0.9Ｖ IIN IRUSH Time[μs] tSS Timing chart at IC start-up CE Input Voltage : V CE (V) Output Voltage : V OUT (V) 7.5 CE“H”Level Voltage 6.0 Ta=25℃,Vin=6.0V,Iout=1mA Ta=25℃, VIN =6.0V, IOUT=1mA, VCE=0V→6.0V, tr=5.0μs Vce=0V→6.0V,tr=5.0us XC6702D501PR-G 500 CE Input Voltage 4.5 3.0 450 Output Voltage 400 350 1.5 300 0.0 250 -1.5 -3.0 Inrush Current 200 150 -4.5 100 -6.0 50 -7.5 Tim e (100μs/div) 0 Inrush Current : IRUSH (m A) Voltage [V] Current [mA] CL=2.2μF CL=4.7μF CL=10μF Example of the inrush current wave form at IC start-up ＜Low ESR capacitor support＞ An internal phase compensation circuit is incorporated in the XC6702 series to enable a stable output voltage to be obtained even when a low ESR capacitor is used. To stabilize the effect of the phase compensation circuit, always connect the output capacitor (CL) in direct proximity to the VOUT pin and VSS pin. In addition, to stabilize the input power, connect the input capacitor (CIN) in direct proximity to the VIN pin and VSS pin. Refer to Table 1 for the recommended capacitance values to be connected. Take particular care in selecting the capacitors for CIN and CL, as the bias dependence of the capacitor, the effect of capacitance loss due to temperature characteristics and other factors, and the effects of ESR may prevent stable phase compensation. Table 1 shows recommended capacitance values (MIN) for the actual bias and temperature conditions used for the capacitor. Select capacitances that satisfy Table 1 in all environments in which the product is to be used. Table 1: Recommended capacitance values (MIN) of CIN and CL OUTPUT VOLTAGE RANGE INPUT CAPACITOR OUTPUT CAPACITOR VOUT(T) CIN CL 1.8V ~ 18.0V 1.0μF 2.2μF 11/27 XC6702 Series ■NOTES ON USE 1) For temporary, transitional voltage drop or voltage rising phenomenon, the IC is liable to malfunction should the ratings be exceeded. 2) Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output current. Please keep the resistance low between VIN and VSS wiring in particular. 3) Please wire the input capacitor (CIN) and the output capacitor (CL) as close to the IC as possible. 4) Capacitances of these capacitors (CIN, CL) are decreased by the influences of bias voltage and ambient temperature. Care shall be taken for capacitor selection to ensure stability of phase compensation from the point of ESR influence. 5) Regarding the input transient response, the undershoot at the output voltage might be larger when input voltage variation is 5.0V or larger and the through-rate is 0.5V/μs or higher. If the undershoot is not acceptable, please increase the output capacitance value and evaluate the system on your PCB well. 6) The IC goes into “undefined state” if the CE pin is not connected (Open state). The CE pin voltage should be fixed in low or high for stable operation. 7) If a capacitor with large capacitance is used on the output, the inrush current can oscillate at starting up. 8) Starting up the IC while the voltage less than 0V is applied to the output can lead to cases where it does not start normally. 9) In general, semiconductor components have a possibility to have variation of electrical specifications due to the (cosmic) radiation exposure. Therefore this product has the same possibility. Please inform us in advance if your system might have a possibility to be exposed to the (cosmic) radiation in the production process (assembly, test, etc.). 10) Torex places an importance on improving our products and their reliability. We request that users incorporate fail-safe designs and post-aging prevention treatment when using Torex products in their systems. 12/27 XC6702 Series ■ TYPICAL PERFORMANCE CHARACTERISTICS Ta=25℃, VIN=VOUT(T) + 1.0V, VCE=VIN, IOUT=1mA , CIN=1.0μF, CL=2.2μF(ceramic) unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (1) Output Voltage vs. Output Current XC6702D181PR-G 2.1 2.1 1.8 1.8 Output Voltage : VOUT (V) Output Voltage : VOUT (V) XC6702D181PR-G 1.5 1.2 Ta=-40℃ Ta=25℃ Ta=105℃ 0.9 0.6 0.3 0.0 0 100 200 300 400 500 1.5 1.2 VIN=4.5V VIN=5.5V VIN=6.5V 0.9 0.6 0.3 0.0 600 0 100 Output Current : IOUT (mA) 4.2 4.2 3.6 3.6 3.0 2.4 Ta=-40℃ Ta=25℃ Ta=105℃ 1.8 1.2 0.6 0.0 0 100 200 300 400 500 2.4 1.2 0.0 600 0 100 Output Voltage : VOUT (V) Output Voltage : VOUT (V) 4.0 Ta=-40℃ Ta=25℃ Ta=105℃ 1.0 0.0 200 300 400 300 400 500 600 XC6702D501PR-G VIN=VCE=7.0V 5.0 100 200 Output Current : IOUT (mA) 5.0 0 600 0.6 6.0 2.0 500 VIN=4.5V VIN=5.3V VIN=6.3V 1.8 6.0 3.0 400 3.0 Output Current : IOUT (mA) XC6702D501PR-G 300 XC6702D331PR-G VIN=VCE=5.3V Output Voltage : VOUT (V) Output Voltage : VOUT (V) XC6702D331PR-G 200 Output Current : IOUT (mA) 500 4.0 VIN=6.0V VIN=7.0V VIN=8.0V 3.0 2.0 1.0 0.0 600 Output Current : IOUT (mA) 0 100 200 300 400 500 600 Output Current : IOUT (mA) * Mount conditions affect heat dissipation. Thermal shutdown may start to operate. 13/27 XC6702 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Ta=25℃, VIN=VOUT(T) + 1.0V, VCE=VIN, IOUT =1mA , CIN=1.0μF, CL=2.2μF(ceramic) unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (1) Output Voltage vs. Output Current XC6702DF01PR-G VIN=VCE=17.0V 18.0 15.0 15.0 Output Voltage : VOUT (V) Output Voltage : VOUT (V) XC6702DF01PR-G 18.0 12.0 Ta=-40℃ Ta=25℃ Ta=105℃ 9.0 6.0 3.0 0.0 0 100 200 300 400 500 12.0 VIN=16.0V VIN=17.0V VIN=18.0V 9.0 6.0 3.0 0.0 0 600 100 200 300 400 500 Output Current : IOUT (mA) Output Current : IOUT (mA) * Mount conditions affect heat dissipation. Thermal shutdown may start to operate. (2) Output Voltage vs. Input Voltage XC6702D181PR-G 2.4 1.88 2.1 1.86 1.8 1.84 Output Voltage : VOUT (V) Output Voltage : VOUT (V) XC6702D181PR-G 1.5 1.2 IOUT=1mA IOUT=10mA IOUT=30mA 0.9 0.6 0.3 0.0 0.0 10.0 20.0 30.0 Input Voltage : VIN (V) IOUT=1mA IOUT=10mA IOUT=30mA 1.82 1.80 1.78 1.76 1.74 1.72 40.0 5 3.5 3.36 3.0 3.34 2.5 2.0 IOUT=1mA IOUT=10mA IOUT=30mA 0.5 0.0 0.0 14/27 Output Voltage : VOUT (V) Output Voltage : VOUT (V) 3.38 1.0 10.0 20.0 30.0 Input Voltage : VIN (V) 25 Input Voltage : VIN (V) 35 XC6702D331PR-G XC6702D331PR-G 4.0 1.5 15 40.0 IOUT=1mA IOUT=10mA IOUT=30mA 3.32 3.30 3.28 3.26 3.24 3.22 5 15 25 Input Voltage : VIN (V) 35 600 XC6702 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Ta=25℃, VIN=VOUT(T) + 1.0V, VCE=VIN, IOUT=1mA , CIN=1.0μF, CL=2.2μF(ceramic) unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (2) Output Voltage vs. Input Voltage XC6702D501PR-G 5.08 6.0 5.06 5.0 5.04 Output Voltage : VOUT (V) Output Voltage : VOUT (V) XC6702D501PR-G 7.0 4.0 3.0 IOUT=1mA IOUT=10mA IOUT=30mA 2.0 1.0 0.0 0.0 10.0 20.0 30.0 Input Voltage : VIN (V) IOUT=1mA IOUT=10mA IOUT=30mA 5.02 5.00 4.98 4.96 4.94 4.92 40.0 10 15 18.0 15.15 15.0 15.10 Output Voltage : VOUT (V) Output Voltage : VOUT (V) 15.20 12.0 9.0 IOUT=1mA IOUT=10mA IOUT=30mA 3.0 0.0 0.0 10.0 20.0 30.0 Input Voltage : VIN (V) 35 40 XC6702DF01PR-G XC6702DF01PR-G 21.0 6.0 20 25 30 Input Voltage : VIN (V) IOUT=1mA IOUT=10mA IOUT=30mA 15.05 15.00 14.95 14.90 14.85 14.80 20 40.0 25 30 35 Input Voltage : VIN (V) 40 (3) Dropout Voltage vs. Output Current XC6702D331PR-G 3000 2500 2500 Dropout Voltage : Vdif (mV) Dropout Voltage : Vdif (mV) XC6702D181PR-G 3000 2000 1500 1000 Ta=-40℃ Ta=25℃ Ta=105℃ 500 0 0 50 100 150 200 250 Output Current : IOUT (mA) Ta=-40℃ Ta=25℃ Ta=105℃ 2000 1500 1000 500 0 300 0 50 100 150 200 250 Output Current : IOUT (mA) 300 * Mount conditions affect heat dissipation. Thermal shutdown may start to operate. 15/27 XC6702 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Ta=25℃, VIN=VOUT(T) + 1.0V, VCE=VIN, IOUT=1mA , CIN=1.0μF, CL=2.2μF(ceramic) unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (3) Dropout Voltage vs. Output Current XC6702DF01PR-G XC6702D501PR-G 3000 3000 2500 Ta=-40℃ Ta=25℃ Ta=105℃ 2000 Dropout Voltage : Vdif (mV) Dropout Voltage : Vdif (mV) 2500 1500 1000 500 0 0 50 100 150 200 250 Output Current : IOUT (mA) Ta=-40℃ Ta=25℃ Ta=105℃ 2000 1500 1000 500 0 0 300 50 100 150 200 250 Output Current : IOUT (mA) 300 * Mount conditions affect heat dissipation. Thermal shutdown may start to operate. (4) Quiescent Current vs. Input Voltage XC6702D331PR-G 60 60 50 50 40 30 20 Ta=-40℃ Ta=25℃ Ta=105℃ 10 0 0 5 10 15 20 25 30 Input Voltage : VIN (V) 35 40 Quiescent Current : ISS (μA) Quiescent Current : ISS (μA) XC6702D181PR-G 40 30 20 Ta=-40℃ Ta=25℃ Ta=105℃ 10 0 0 5 60 50 50 40 30 Ta=-40℃ Ta=25℃ Ta=105℃ 0 0 5 10 15 20 25 30 Input Voltage : VIN (V) 35 40 Quiescent Current : ISS (μA) Quiescent Current : ISS (μA) 16/27 60 10 15 20 25 30 Input Voltage : VIN (V) 35 40 XC6702DF01PR-G XC6702D501PR-G 20 10 40 30 20 Ta=-40℃ Ta=25℃ Ta=105℃ 10 0 0 5 10 15 20 25 30 Input Voltage : VIN (V) 35 40 XC6702 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Ta=25℃, VIN=VOUT(T) + 1.0V, VCE=VIN, IOUT=1mA , CIN=1.0μF, CL=2.2μF(ceramic) unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (5) Output Voltage vs. Ambient Temperature XC6702D331PR-G 1.88 3.38 1.86 3.36 1.84 3.34 Output Voltage : VOUT (V) Output Voltage : VOUT (V) XC6702D181PR-G 1.82 1.80 1.78 IOUT=1mA IOUT=10mA IOUT=30mA 1.76 1.74 1.72 -50 -25 0 25 50 75 100 Ambient Temperature : Ta (℃) 3.32 3.30 3.28 IOUT=1mA IOUT=10mA IOUT=30mA 3.26 3.24 3.22 -50 125 -25 5.08 15.20 5.06 15.15 5.04 15.10 5.02 5.00 4.98 IOUT=1mA IOUT=10mA IOUT=30mA 4.96 4.94 4.92 -50 -25 0 25 50 75 100 Ambient Temperature : Ta (℃) 125 XC6702DF01PR-G Output Voltage : VOUT (V) Output Voltage : VOUT (V) XC6702D501PR-G 0 25 50 75 100 Ambient Temperature : Ta (℃) 15.05 15.00 14.95 IOUT=1mA IOUT=10mA IOUT=30mA 14.90 14.85 14.80 125 -50 -25 0 25 50 75 100 Ambient Temperature : Ta (℃) 125 (6) Quiescent Current vs. Ambient Temperature XC6702D331PR-G 60 60 50 50 40 30 20 10 0 -50 -25 0 25 50 75 100 Ambient Temperature : Ta (℃) 125 Quiescent Current : ISS (μA) Quiescent Current : ISS (μA) XC6702D181PR-G 40 30 20 10 0 -50 -25 0 25 50 75 100 Ambient Temperature : Ta (℃) 125 17/27 XC6702 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Ta=25℃, VIN=VOUT(T) + 1.0V, VCE=VIN, IOUT=1mA , CIN=1.0μF, CL=2.2μF(ceramic) unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (6) Quiescent Current vs. Ambient Temperature XC6702DF01PR-G 60 60 50 50 40 30 20 10 0 -50 -25 0 25 50 75 100 Ambient Temperature : Ta (℃) 125 Quiescent Current : ISS (μA) Quiescent Current : ISS (μA) XC6702D501PR-G 40 30 20 10 0 -50 -25 0 25 50 75 100 Ambient Temperature : Ta (℃) 125 (7) CE Threshold Voltage vs. Ambient Temperature XC6702Dxx1xR-G 3.0 CE Threshold Voltage : VCE (V) 2.5 2.0 1.5 1.0 CE"H"LEVEL 0.5 CE"L"LEVEL 0.0 -50 -25 0 25 50 75 100 Ambient Temperature : Ta (℃) 125 (8) Input Transient Response Output Voltage 7.5 6.5 Input Voltage 5.5 4.5 Time (100μs/div) 18/27 8.5 XC6702D181PR-G 1.86 1.84 1.82 1.80 1.78 1.76 1.74 1.72 1.70 1.68 1.66 VIN=VCE=4.5V⇔5.5V tr=tf=5.0μs, IOUT=30mA 9.5 Output Voltage 8.5 7.5 6.5 Input Voltage 5.5 4.5 Time (100μs/div) Input Voltage : VIN (V) 9.5 Input Voltage : VIN (V) Output Voltage : VOUT (V) 1.86 1.84 1.82 1.80 1.78 1.76 1.74 1.72 1.70 1.68 1.66 VIN=VCE=4.5V⇔5.5V tr=tf=5.0μs Output Voltage : VOUT (V) XC6702D181PR-G XC6702 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Ta=25℃, VIN=VOUT(T) + 1.0V, VCE=VIN, IOUT=1mA , CIN=1.0μF, CL=2.2μF(ceramic) unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (8) Input Transient Response XC6702D331PR-G 8.5 7.5 6.5 5.5 4.5 VIN=VCE=6.0V⇔7.0V tr=tf=5.0μs 10.0 9.0 8.0 Input Voltage 7.0 6.0 5.06 5.04 5.02 5.00 4.98 4.96 4.94 4.92 4.90 4.88 4.86 Output Voltage : VOUT (V) Output Voltage Time (100μs/div) 21.0 Output Voltage 20.0 19.0 18.0 Input Voltage 17.0 16.0 Time (100μs/div) Input Voltage 5.5 4.5 VIN=VCE=6.0V⇔7.0V tr=tf=5.0μs, IOUT=30mA 11.0 Output Voltage 10.0 9.0 8.0 Input Voltage 7.0 6.0 XC6702DF01PR-G VIN=VCE=16.0V⇔17.0V tr=tf=5.0μs Input Voltage : VIN (V) Output Voltage : VOUT (V) 15.06 15.04 15.02 15.00 14.98 14.96 14.94 14.92 14.90 14.88 14.86 6.5 Time (100μs/div) 15.06 15.04 15.02 15.00 14.98 14.96 14.94 14.92 14.90 14.88 14.86 Output Voltage : VOUT (V) XC6702DF01PR-G 8.5 7.5 XC6702D501PR-G 11.0 Input Voltage : VIN (V) Output Voltage : VOUT (V) 5.06 5.04 5.02 5.00 4.98 4.96 4.94 4.92 4.90 4.88 4.86 Output Voltage Time (100μs/div) Time (100μs/div) XC6702D501PR-G 9.5 Input Voltage : VIN (V) Input Voltage Output Voltage : VOUT (V) Output Voltage VIN=VCE=4.5V⇔5.5V tr=tf=5.0μs, IOUT=30mA Input Voltage : VIN (V) 3.36 3.34 3.32 3.30 3.28 3.26 3.24 3.22 3.20 3.18 3.16 9.5 Input Voltage : VIN (V) Output Voltage : VOUT (V) 3.36 3.34 3.32 3.30 3.28 3.26 3.24 3.22 3.20 3.18 3.16 VIN=VCE=4.5V⇔5.5V tr=tf=5.0μs VIN=VCE=16.0V⇔17.0V tr=tf=5.0μs, IOUT=30mA 21.0 Output Voltage 20.0 19.0 18.0 Input Voltage 17.0 Input Voltage : VIN (V) XC6702D331PR-G 16.0 Time (100μs/div) 19/27 XC6702 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Ta=25℃, VIN=VOUT(T) + 1.0V, VCE=VIN, IOUT=1mA , CIN=1.0μF, CL=2.2μF(ceramic) unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (9) Load Transient Response 120 90 60 30 0 IOUT=1mA⇔30mA tr=tf=5.0μs 90 60 Output Current 30 Output Voltage : VOUT (V) 120 Output Voltage 0 4.9 4.5 4.1 3.7 3.3 2.9 2.5 2.1 1.7 1.3 0.9 90 60 Output Current 30 0 Output Voltage : VOUT (V) 120 Output Voltage 200 Output Current 100 0 IOUT=1mA⇔100mA tr=tf=5.0μs 500 400 Output Voltage 300 200 Output Current 100 0 XC6702D501PR-G 150 Time (200μs/div) 20/27 IOUT=1mA⇔30mA tr=tf=5.0μs Output Current : IOUT (mA) Output Voltage : VOUT (V) 6.6 6.2 5.8 5.4 5.0 4.6 4.2 3.8 3.4 3.0 2.6 300 Time (200μs/div) Time (200μs/div) XC6702D501PR-G Output Voltage XC6702D331PR-G 150 Output Current : IOUT (mA) Output Voltage : VOUT (V) 4.9 4.5 4.1 3.7 3.3 2.9 2.5 2.1 1.7 1.3 0.9 400 Time (200μs/div) Time (200μs/div) XC6702D331PR-G 500 Output Current : IOUT (mA) Output Current 3.4 3.0 2.6 2.2 1.8 1.4 1.0 0.6 0.2 -0.2 -0.6 IOUT=1mA⇔100mA tr=tf=5.0μs 6.6 6.2 5.8 5.4 5.0 4.6 4.2 3.8 3.4 3.0 2.6 IOUT=1mA⇔100mA tr=tf=5.0μs 500 400 Output Voltage 300 200 Output Current 100 0 Time (200μs/div) Output Current : IOUT (mA) Output Voltage XC6702D181PR-G Output Current : IOUT (mA) 150 Output Current : IOUT (mA) Output Voltage : VOUT (V) 3.4 3.0 2.6 2.2 1.8 1.4 1.0 0.6 0.2 -0.2 -0.6 IOUT=1mA⇔30mA tr=tf=5.0μs Output Voltage : VOUT (V) XC6702D181PR-G XC6702 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Ta=25℃, VIN=VOUT(T) + 1.0V, VCE=VIN, IOUT=1mA , CIN=1.0μF, CL=2.2μF(ceramic) unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (9) Load Transient Response 120 Output Voltage 90 60 Output Current 30 0 XC6702DF01PR-G 16.6 16.2 15.8 15.4 15.0 14.6 14.2 13.8 13.4 13.0 12.6 IOUT=1mA⇔100mA tr=tf=5.0μs 500 400 Output Voltage 300 200 Output Current 100 Output Current : IOUT (mA) 150 Output Current : IOUT (mA) Output Voltage : VOUT (V) 16.6 16.2 15.8 15.4 15.0 14.6 14.2 13.8 13.4 13.0 12.6 IOUT=1mA⇔30mA tr=tf=5.0μs Output Voltage : VOUT (V) XC6702DF01PR-G 0 Time (200μs/div) Time (200μs/div) (10) Input Rising Response Time 20.0 16.0 12.0 8.0 Input Voltage 4.0 0.0 2.5 2.0 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 Time (100μs/div) VIN=VCE=0→4.5V tr=5.0μs 16.0 12.0 8.0 Input Voltage 4.0 0.0 20.0 16.0 12.0 8.0 Input Voltage 4.0 0.0 VIN=VCE=0→4.5V tr=5.0μs, IOUT=30mA 20.0 Output Voltage 5.0 4.0 3.0 2.0 1.0 0.0 -1.0 -2.0 -3.0 -4.0 -5.0 16.0 12.0 8.0 Input Voltage 4.0 Input Voltage : VIN (V) Output Voltage Time (100μs/div) 20.0 XC6702D331PR-G Output Voltage : VOUT (V) Output Voltage : VOUT (V) 5.0 4.0 3.0 2.0 1.0 0.0 -1.0 -2.0 -3.0 -4.0 -5.0 Output Voltage Time (100μs/div) Input Voltage : VIN (V) XC6702D331PR-G VIN=VCE=0→4.5V tr=5.0μs, IOUT=30mA Input Voltage : VIN (V) Output Voltage XC6702D181PR-G Output Voltage : VOUT (V) Output Voltage : VOUT (V) 2.5 2.0 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 VIN=VCE=0→4.5V tr=5.0μs Input Voltage : VIN (V) XC6702D181PR-G 0.0 Time (100μs/div) 21/27 XC6702 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Ta=25℃, VIN=VOUT(T) + 1.0V, VCE=VIN, IOUT=1mA , CIN=1.0μF, CL=2.2μF(ceramic) unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (10) Input Rising Response Time 24.0 18.0 12.0 Input Voltage 6.0 0.0 XC6702D501PR-G 7.5 6.0 4.5 3.0 1.5 0.0 -1.5 -3.0 -4.5 -6.0 -7.5 24.0 18.0 12.0 Input Voltage 6.0 0.0 80.0 64.0 48.0 32.0 Input Voltage 16.0 0.0 20.0 16.0 12.0 8.0 4.0 0.0 -4.0 -8.0 -12.0 -16.0 -20.0 Output Voltage : VOUT (V) Output Voltage XC6702DF01PR-G Time (100μs/div) VIN=VCE=0→16.0V tr=5.0μs, IOUT=30mA Output Voltage 80.0 64.0 48.0 32.0 Input Voltage 16.0 Input Voltage : VIN (V) VIN=VCE=0→16.0V tr=5.0μs Input Voltage : VIN (V) Output Voltage : VOUT (V) 20.0 16.0 12.0 8.0 4.0 0.0 -4.0 -8.0 -12.0 -16.0 -20.0 30.0 Output Voltage Time (100μs/div) Time (100μs/div) XC6702DF01PR-G VIN=VCE=0→6.0V tr=5.0μs, IOUT=30mA Input Voltage : VIN (V) 30.0 Output Voltage Input Voltage : VIN (V) Output Voltage : VOUT (V) 7.5 6.0 4.5 3.0 1.5 0.0 -1.5 -3.0 -4.5 -6.0 -7.5 VIN=VCE=0→6.0V tr=5.0μs Output Voltage : VOUT (V) XC6702D501PR-G 0.0 Time (100μs/div) (11) CE Rising Response Time 16.0 12.0 8.0 CE Input Voltage 4.0 0.0 Time (100μs/div) 22/27 20.0 2.5 2.0 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 VCE=0→4.5V tr=5.0μs, IOUT=30mA Output Voltage 20.0 16.0 12.0 8.0 CE Input Voltage 4.0 0.0 Time (100μs/div) CE Input Voltage : VCE (V) Output Voltage XC6702D181PR-G Output Voltage : VOUT (V) Output Voltage : VOUT (V) 2.5 2.0 1.5 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 VCE=0→4.5V tr=5.0μs CE Input Voltage : VCE (V) XC6702D181PR-G XC6702 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Ta=25℃, VIN=VOUT(T) + 1.0V, VCE=VIN, IOUT =1mA , CIN=1.0μF, CL=2.2μF(ceramic) unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (11) CE Rising Response Time 16.0 12.0 8.0 4.0 0.0 VCE=0→6.0V tr=5.0μs 24.0 18.0 12.0 CE Input Voltage 6.0 0.0 7.5 6.0 4.5 3.0 1.5 0.0 -1.5 -3.0 -4.5 -6.0 -7.5 Time (100μs/div) Output Voltage VCE=0→16.0V tr=5.0μs 80.0 64.0 48.0 32.0 CE Input Voltage 16.0 0.0 Time (100μs/div) 8.0 CE Input Voltage 4.0 0.0 VCE=0→6.0V tr=5.0μs, IOUT=30mA 30.0 Output Voltage 24.0 18.0 12.0 CE Input Voltage 6.0 0.0 XC6702DF01PR-G 20.0 16.0 12.0 8.0 4.0 0.0 -4.0 -8.0 -12.0 -16.0 -20.0 Output Voltage : VOUT (V) Output Voltage : VOUT (V) 20.0 16.0 12.0 8.0 4.0 0.0 -4.0 -8.0 -12.0 -16.0 -20.0 12.0 Time (100μs/div) CE Input Voltage : VCE (V) XC6702DF01PR-G 16.0 XC6702D501PR-G Output Voltage : VOUT (V) 30.0 Output Voltage CE Input Voltage : VCE (V) Output Voltage : VOUT (V) 7.5 6.0 4.5 3.0 1.5 0.0 -1.5 -3.0 -4.5 -6.0 -7.5 20.0 Time (100μs/div) Time (100μs/div) XC6702D501PR-G Output Voltage CE Input Voltage : VCE (V) CE Input Voltage 5.0 4.0 3.0 2.0 1.0 0.0 -1.0 -2.0 -3.0 -4.0 -5.0 CE Input Voltage : VCE (V) 20.0 VCE=0→4.5V tr=5.0μs, IOUT=30mA VCE=0→16.0V tr=5.0μs, IOUT=30mA Output Voltage 80.0 64.0 48.0 32.0 CE Input Voltage 16.0 CE Input Voltage : VCE (V) Output Voltage XC6702D331PR-G Output Voltage : VOUT (V) Output Voltage : VOUT (V) 5.0 4.0 3.0 2.0 1.0 0.0 -1.0 -2.0 -3.0 -4.0 -5.0 VCE=0→4.5V tr=5.0μs CE Input Voltage : VCE (V) XC6702D331PR-G 0.0 Time (100μs/div) 23/27 XC6702 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Ta=25℃, VIN=VOUT(T) + 1.0V, VCE=VIN, IOUT=1mA , CIN=1.0μF, CL=2.2μF(ceramic) unless otherwise specified. This parameter is tested on VIN=4.5V if the input voltage is under 4.5V. (12) Power Supply Ripple Rejection Ratio XC6702D181PR-G 80 60 40 IOUT=1mA IOUT=30mA 20 0 0.01 0.1 1 10 100 Ripple Frequency : f (kHz) 1000 80 60 40 0 0.01 60 40 IOUT=1mA IOUT=30mA 0.1 1 10 100 Ripple Frequency : f (kHz) 1 10 100 Ripple Frequency : f (kHz) 1000 1000 VIN=VCE=16.0VDC+0.5VP-PAC 100 Power Supply Ripple Rejection Ratio : PSRR (dB) Power Supply Ripple Rejection Ratio : PSRR (dB) 24/27 80 0 0.01 0.1 XC6702DF01PR-G VIN=VCE=6.0VDC+0.5VP-PAC 20 IOUT=1mA IOUT=30mA 20 XC6702D501PR-G 100 VIN=VCE=4.75VDC+0.5VP-PAC 100 Power Supply Ripple Rejection Ratio : PSRR (dB) 100 Power Supply Ripple Rejection Ratio : PSRR (dB) XC6702D331PR-G VIN=VCE=4.75VDC+0.5VP-PAC 80 60 40 IOUT=1mA IOUT=30mA 20 0 0.01 0.1 1 10 100 Ripple Frequency : f (kHz) 1000 XC6702 Series ■PACKAGING INFORMATION For the latest package information go to, www.torexsemi.com/technical-support/packages PACKAGE OUTLINE / LAND PATTERN THERMAL CHARACTERISTICS SOT-89-5 SOT-89-5 PKG SOT-89-5 Power Dissipation USP-6C USP-6C PKG USP-6C Power Dissipation SOP-8FD SOP-8FD PKG SOP-8FD Power Dissipation 25/27 XC6702 Series ■MARKING RULE USP-6C ●USP-6C / SOT-89-5 / SOP-8FD (mark header: ①～③) *mark header does not change with a lot. ④ ② ⑤ ③ 2 ① represents product series 6 ① 1 5 4 3 MARK PRODUCT SERIES V XC6702****** SOT89-5 5 2 ① ② ④ ⑤ ③ 4 ② represents type of regulators and output voltage MARK 4 5 6 7 C D TYPE OUTPUT VOLTAGE(V) D 1.8～3.0 3.1～6.0 6.1～9.0 9.1～12.0 12.1～15.0 15.1～18.0 1 PRODUCT SERIES 2 8 3 SOP-8FD 7 6 5 XC6702D***** -G ① ② ③ ④ ⑤ 1 2 3 4 ③ represents output voltage MARK OUTPUT VOLTAGE (V) MARK OUTPUT VOLTAGE (V) F H K 1.8 4.6 4.7 4.8 7.6 7.7 7.8 10.6 10.7 10.8 13.6 13.7 13.8 16.6 16.7 16.8 0 1 2 - 3.1 3.2 3.3 6.1 6.2 6.3 9.1 9.2 9.3 12.1 12.2 12.3 15.1 15.2 15.3 3 - 3.4 6.4 9.4 12.4 15.4 L 1.9 4.9 7.9 10.9 13.9 16.9 4 5 6 7 8 9 A B C D E - 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5 12.5 12.6 12.7 12.8 12.9 13.0 13.1 13.2 13.3 13.4 13.5 15.5 15.6 15.7 15.8 15.9 16.0 16.1 16.2 16.3 16.4 16.5 M N P R S T U V X Y Z 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0 14.0 14.1 14.2 14.3 14.4 14.5 14.6 14.7 14.8 14.9 15.0 17.0 17.1 17.2 17.3 17.4 17.5 17.6 17.7 17.8 17.9 18.0 ④,⑤ represents production lot number 01～09、0A～0Z、11～9Z、A1～A9、AA～AZ、B1～ZZ in order. (G，I，J，O，Q，W excluded) * No character inversion used. 26/27 XC6702 Series 1. The product and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this datasheet is up to date. 2. The information in this datasheet is intended to illustrate the operation and characteristics of our products. We neither make warranties or representations with respect to the accuracy or completeness of the information contained in this datasheet nor grant any license to any intellectual property rights of ours or any third party concerning with the information in this datasheet. 3. Applicable export control laws and regulations should be complied and the procedures required by such laws and regulations should also be followed, when the product or any information contained in this datasheet is exported. 4. The product is neither intended nor warranted for use in equipment of systems which require extremely high levels of quality and/or reliability and/or a malfunction or failure which may cause loss of human life, bodily injury, serious property damage including but not limited to devices or equipment used in 1) nuclear facilities, 2) aerospace industry, 3) medical facilities, 4) automobile industry and other transportation industry and 5) safety devices and safety equipment to control combustions and explosions. Do not use the product for the above use unless agreed by us in writing in advance. 5. Although we make continuous efforts to improve the quality and reliability of our products; nevertheless Semiconductors are likely to fail with a certain probability. So in order to prevent personal injury and/or property damage resulting from such failure, customers are required to incorporate adequate safety measures in their designs, such as system fail safes, redundancy, and fire prevention features. 6. Our products are not designed to be Radiation-resistant. 7. Please use the product listed in this datasheet within the specified ranges. 8. We assume no responsibility for damage or loss due to abnormal use. 9. All rights reserved. No part of this datasheet may be copied or reproduced unless agreed by Torex Semiconductor Ltd in writing in advance. TOREX SEMICONDUCTOR LTD. 27/27