XC74WL4053SR_001

XC74WL4053SR CMOS Logic ETR1325_001 ■GENERAL DESCRIPTION XC74WL4053SR is 2-channel analog multiplexer / demultiplexer manufactured using silicon gate CMOS processes. The small supply current, which is one of the features of the CMOS logic, gives way to high speed operations which enables LS-TTL. With wave forming buffers connected internally, stabilized output can be achieved as the series offers high noise immunity. As the series is integrated into a mini molded, MSOP-8B package, high density mounting is possible. ■APPLICATIONS ●Palmtops ●Digital equipment ■FEATURES High Speed Operations Low ON Resistance : tpd = 1.5ns (TYP.) (VCC=5V) : RON = 12Ω(TYP.) Operating Voltage Range : 2V ~ 5.5V Low Power Consumption : 2μA (MAX.)@Ta=25℃ CMOS Logic 2-channel Analog Multiplexer/Demultiplexer Small Package : MSOP-8B ■PIN CONFIGURATION ■FUNCTIONS CONTROL INPUT INH A H L L H=High level L=Low level X=Don’t care X H L ON CHANNEL NONE Y1 Y0 ■ABSOLUTE MAXIMUM RATINGS PARAMETER Supply Voltage Control Input Voltage Switch Input/Output Voltage Control Input Diode Current Switch Output Diode Current Switch Input/Output Current VCC,GND Current Power Dissipation (Ta = 25℃) Storage Temperature Range Note: Voltage is all ground standardized Ta=-40℃~85℃ SYMBOL VCC VCONT Vi/o IIK IOK Ii/O ICC,IGND Pd Tstg RATINGS -0.5~+6.0 -0.5~+6.0 -0.5~VCC+0.5 -20 ±20 ±25 ±50 300 -65~+150 UNITS V V V mA mA mA mA mW ℃ 1/11 XC74WL4053SR ■RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Control Input Voltage Switch Input/Output Voltage Operating Temperature Range Input Rise and Fall Time SYMBOL VCC VCONT Vi/o Topr tr,tf CONDITIONS 2~5.5 0~5.5 0~VCC -40~+85 0~200（VCC=3.3V） 0~100（VCC=5V） UNITS V V V ℃ ns ■DC ELECTRICAL CHARACTERISTICS PARAMETER High Level Control Input Voltage Low Level Control Input Voltage SYMBOL VCC(V) 2.0 VIH 3.0 5.5 2.0 VIL 3.0 5.5 2.0 Peak ON Resistance RONmax 3.0 4.5 2.0 ON Resistance RON(1) 3.0 4.5 Switch ON Resistance Differential Power Off Leak Current Power On Leak Current Control Input Current Static Supply Current 2.0 △RON IS(OFF) IS(ON) IINH ICC 3.0 4.5 5.5 5.5 0~5.5 5.5 VINH=VIL VCOM=0~VCC ICOM=1mA VINH=VIL VCOM=GND OR VCC ICOM=1mA VINH=VIL VCOM=0~VCC ICOM=1mA VINH=VIH, VOM=VCC, VY=GND VINH=VIL, VCOM=VCC, or GND VCOM=VCC or GND VCOM=VCC or GND CONDITIONS Ta=25℃ MIN. 1.50 2.10 3.85 － － － － － － － － － － － － － － － － － － － TYP. － － － － － － 130 22 12 23 14 10 13 3 2 MAX. － － － 0.50 0.90 1.65 350 50 25 50 30 20 35 6 4 ±0.1 ±0.1 ±0.1 2.0 Ta=-40℃~85℃ MIN. 1.50 2.10 3.85 － － － － － － － － － － － － － － － － MAX. － － － 0.50 0.90 1.65 550 65 35 65 40 25 55 8 6 ±0.1 ±0.1 ±0.1 20.2 μA μA μA μA Ω Ω Ω V V UNITS 2/11 XC74WL4053SR ■SWITCHING ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL CL VCC(V) 2.0 15pF tPLH Delay Time tPHL 50pF 3.3 5.0 2.0 3.3 5.0 2.0 15pF Output Enable Time tZL tZH 50pF 3.3 5.0 2.0 3.3 5.0 2.0 15pF Output Disable Time tLZ tHZ 50pF 3.3 5.0 2.0 3.3 5.0 RL=1kΩ fCOM=1kHz RL=600kΩ -3dB Band Width 50pF 3.0 VY 20log10 VCOM =-3dB (tr=tf=3ns) Ta=-40℃~85℃ MAX. 12.0 4.0 3.0 20.0 6.0 5.0 45.0 9.0 7.5 50.0 10.0 8.5 45.0 17.0 14.0 60.0 23.0 20.0 MIN. － － － － － － － － － － － － － － － － － － MAX. 15.0 5.5 4.0 23 8.0 6.0 60.0 11.0 9.0 65.0 12.0 10.0 55.0 20.0 18.0 75.0 27.0 25.0 ns ns ns ns ns ns UNITS CONDITIONS Ta=25℃ MIN. － － － － － － － TYP. 2.5 2.0 1.5 4.0 3.0 2.0 8.5 4.5 3.5 9.0 5.0 4.0 9.0 7.0 6.0 12 10 8.0 RL=1kΩ － － － RL=1kΩ － － － RL=1kΩ － － － RL=10kΩ － － Sine Wave Distortion Rate 50pF 3.0 － 0.05 － － － % － 200 － － － MHz Feed Through (Switch off) 50pF 3.0 RL=600kΩ － -60 － － － dB 2.0 Cross Talk (Control Switches) 50pF 3.0 4.5 2.0 Cross Talk (Between Switches) Control Input Capacitance Switch Input/Output Capacitance Feed Through Capacitance Power Dissipation Capacitance CINH COM/Y COM/Y Cpd 50pF 3.0 4.5 － － － － － － － － RL=600kΩ fCOM=1kHz RL=600kΩ fINH=1MHz － － － － － － － － － － 60 100 150 -60 -60 -60 5 6 0.5 13 － － － － － － 10 － － － － － － － － － － － － － － － － － － － 10 － － － pF pF pF pF dB mV 3/11 XC74WL4053SR ■ON RESISTANCE ●Test Circuit ●Input Voltage Dependancies of ON Resistance 4/11 XC74WL4053SR ■POWER OFF LEAK CURRENT ■POWER ON LEAK CURRENT 5/11 XC74WL4053SR ■DELAY TIME ●Test Circuit ●Waveform 6/11 XC74WL4053SR ■OUTPUT ENABLE TIME, OUTPUT DISABLE TIME ●Test Circuit ●Waveform 7/11 XC74WL4053SR ■SINE WAVE DISTORTION RATE 10k 10 50k ■-3dB BAND WIDTH * fCOM by since wave(VCOM=VCC/10[Vp-p]) 8/11 XC74WL4053SR ■FEED THROUGH TEST CICUIT ■CROSS TALK (CONTROL INPUT → SWITCH OUTPUT) ●Test Circuit ●Waveform 9/11 XC74WL4053SR ■CROSS TALK (BETWEEN SWITCHES) ●Test Circuit ●Waveform 10/11 XC74WL4053SR 1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this catalog is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this catalog. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this catalog. 4. The products in this catalog are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this catalog within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this catalog may be copied or reproduced without the prior permission of Torex Semiconductor Ltd. 11/11