2SB1495

2SB1495 TOSHIBA Transistor Silicon PNP Epitaxial Type 2SB1495 High-Power Switching Applications Unit: mm • • • High DC current gain: hFE = 2000 (min) (VCE = −2 V, IC = −2 A) Low saturation voltage: VCE (sat) = −1.5 V (max) (IC = −1.5 A) Complementary to 2SD2257 Absolute Maximum Ratings (Tc = 25°C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range Ta = 25°C Tc = 25°C DC Pulsed Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Rating −100 −100 −8 −3 −5 −0.3 2.0 20 150 −55 to 150 Unit V V V A A W °C °C JEDEC JEITA TOSHIBA ― ― 2-10R1A Weight: 1.7 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Equivalent Circuit Collector Base ≈ 4 kΩ ≈ 800 Ω Emitter 1 2006-11-21 2SB1495 Electrical Characteristics (Tc = 25°C) Characteristics Collector cut-off current Emitter cut-off current Collector-emitter breakdown voltage DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage Turn-on time Symbol ICBO IEBO V (BR) CEO hFE (1) hFE (2) VCE (sat) VBE (sat) ton Test Condition VCB = −100 V, IE = 0 VEB = −8 V, IC = 0 IC = −10 mA, IB = 0 VCE = −2 V, IC = −1 A VCE = −2 V, IC = −2 A IC = −1.5 A, IB = −1.5 mA IC = −1.5 A, IB = −1.5 mA Input IB2 IB2 IB1 Output 20 Ω Min ― −0.8 −100 2000 2000 ― ― ― Typ. ― ― ― ― ― ― ― 0.5 Max −10 −4.0 ― ― ― −1.5 −2.0 ― V V Unit μA mA V 20 μ s Switching time IB1 Storage time tstg ― 1.0 ― μs VCC ≈ −30 V Fall time tf −IB1 = IB2 = 1.5 mA, duty cycle ≤ 1% ― 0.4 ― Marking B1495 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-21 2SB1495 IC – VCE −4 Common emitter Tc = 25°C −2.5 −1000 −800 −3.0 Common emitter VCE = −2 V IC – VBE (A) −3 (A) −400 −300 −250 Collector current IC −500 −2 Collector current IC −2.0 −1.5 −1.0 Tc = 100°C 25 −55 −1 IB = −200 μA 0 0 −0.5 −1 −2 −3 −4 −5 0 0 −0.4 −0.8 −1.2 −1.6 −2.0 −2.4 −2.8 Collector-emitter voltage VCE (V) Base-emitter voltage VBE (V) hFE – IC 10000 VCE (sat) – IC Collector-emitter saturation voltage VCE (sat) (V) −5 Common emitter IC/IB = 1000 −3 5000 DC current gain hFE 3000 Tc = 100°C 1000 500 300 Common emitter VCE = −2 V 100 −0.03 −0.1 −0.3 −1 −3 −5 −10 25 −55 Tc = −55°C −1 25 100 −0.5 −0.3 −0.5 −1 −3 −5 Collector current IC (A) Collector current IC (A) Safe Operating Area VBE (sat) – IC Base-emitter saturation voltage VBE (sat) (V) (A) −5 Common emitter IC/IB = 1000 −3 Tc = −55°C 25 −1 100 −5 −3 IC max (pulsed)* Collector current IC −1 −0.5 −0.3 *: Single nonrepetitive pulse Tc = 25°C 10 ms* 1 ms* 100 μs* −0.1 −0.05 Curves must be derated linearly with increase in temperature. −0.03 −0.3 −1 −3 −10 VCEO max −30 −100 −300 −0.5 −0.3 −0.5 −1 −3 −5 Collector current IC (A) Collector-emitter voltage VCE (V) 3 2006-11-21 2SB1495 RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 20070701-EN • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 4 2006-11-21