2SC2229

2SC2229 TOSHIBA Transistor Silicon NPN Triple Diffused Type (PCT Process) 2SC2229 Black and White TV Video Output Applications High-Voltage Switching Applications Driver Stage Audio Amplifier Applications Unit: mm • • • High breakdown voltage: VCEO = 150 V (min) Low output capacitance: Cob = 5.0 pF (max) High transition frequency: fT = 120 MHz (typ.) Absolute Maximum Ratings (Ta = 25°C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range Symbol VCBO VCEO VEBO IC IB PC Tj Tstg Rating 200 150 5 50 20 800 150 −55 to 150 Unit V V V mA mA mW °C °C JEDEC JEITA TOSHIBA TO-92MOD ― 2-5J1A Weight: 0.36 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-09 2SC2229 Electrical Characteristics (Ta = 25°C) Characteristics Collector cut-off current Emitter cut-off current DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage Transition frequency Collector output capacitance Symbol ICBO IEBO hFE (Note) VCE (sat) VBE (sat) fT Cob Test Condition VCB = 200 V, IE = 0 VEB = 5 V, IC = 0 VCE = 5 V, IC = 10 mA IC = 10 mA, IB = 1 mA IC = 10 mA, IB = 1 mA VCE = 30 V, IC = 10 mA VCB = 10 V, IE = 0, f = 1 MHz Min ― ― 70 ― ― ― ― Typ. ― ― ― ― ― 120 3.5 Max 0.1 0.1 240 0.5 1 ― 5 V V MHz pF Unit μA μA Note: hFE classification O: 70 to 140, Y: 120 to 240 Marking C2229 Part No. (or abbreviation code) Lot No. Characteristics indicator A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-09 2SC2229 IC – VCE 50 400 1000 500 300 Common emitter 50 IC – VBE Common emitter VCE = 5 V 40 (mA) 40 200 Collector current IC 30 Collector current IC (mA) Ta = 25°C 150 100 30 Ta = 100°C 20 25 0 20 10 IB = 50 μA 10 0 0 2 4 6 8 10 12 14 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Collector-emitter voltage VCE (V) Base-emitter voltage VBE (V) hFE – IC 500 300 Common emitter Ta = 25°C 10 100 50 30 VCE = 2 V 5 500 1000 hFE – IC Common emitter DC current gain hFE DC current gain hFE VCE = 5 V Ta = 100°C 25 300 100 50 30 0 10 0 1 3 10 30 100 0.5 1 3 10 30 100 Collector current IC (mA) Collector current IC (mA) VCE (sat) – IC 3 VCE (sat) – IC 2 Collector-emitter saturation voltage VCE (sat) (V) Common emitter Ta = 25°C 1 0.5 0.3 IC/IB = 20 10 5 0.1 0.05 0.5 Collector-emitter saturation voltage VCE (sat) (V) Common emitter 1 0.5 0.3 Ta = 100°C IC/IB = 10 25 0.1 0.05 0.03 0.5 1 3 10 30 100 0 1 3 10 30 100 Collector current IC (mA) Collector current IC (mA) 3 2006-11-09 2SC2229 Collector output capacitance Cob (pF) Emitter input capacitance Cib (pF) Cib, Cob – VR 50 30 Cib (IC = 0) 500 fT – IC Transition frequency fT (MHz) f = 1 MHz Ta = 25°C 300 Common emitter Ta = 25°C VCE = 30 V 100 50 30 10 10 Cob (IE = 0) 5 3 2 10 0.5 1 3 10 30 100 1 1 3 10 30 100 Reverse voltage VR (V) Collector current IC (mA) Safe Operating Area 200 IC max (pulsed)* 100 IC max (continuous) 300 ms* 100 ms* 1.2 PC – Ta (W) Collector power dissipation PC VCEO max 1.0 (mA) 50 1 s* 30 DC operation 0.8 Collector current IC 0.6 0.4 10 0.2 5 *: Single nonrepetitive pulse 3 Ta = 25°C Curves must be derated linearly with increase in temperature. 1 3 10 30 100 300 0 0 20 40 60 80 100 120 140 160 Ambient temperature Ta (°C) Collector-emitter voltage VCE (V) 4 2006-11-09 2SC2229 RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 20070701-EN • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-09