2SC3419_04

2SC3419 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) 2SC3419 Medium-Power Amplifier Applications. Unit: mm • • • Low saturation voltage: VCE (sat) = 0.25 V (typ.) (IC = 500 mA, IB = 50 mA) High collector power dissipation: PC = 1.2 W (Ta = 25°C) Complementary to 2SA1356 Maximum Ratings (Tc = 25°C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range Ta = 25°C Tc = 25°C Symbol VCBO VCEO VEBO IC IB PC Tj Tstg Rating 40 40 5 800 80 1.2 5 150 −55 to 150 Unit V V V mA mA W JEDEC °C °C ― ― 2-8H1A JEITA TOSHIBA Electrical Characteristics (Tc = 25°C) Characteristics Collector cut-off current Emitter cut-off current Collector-emitter breakdown voltage Symbol ICBO IEBO VCEO hFE (1) DC current gain (Note) hFE (2) Collector-emitter saturation voltage Base-emitter voltage Transition frequency Collector output capacitance VCE (sat) VBE fT Cob Test Condition VCB = 40 V, IE = 0 VEB = 5 V, IC = 0 IC = 10 mA, IB = 0 VCE = 2 V, IC = 50 mA VCE = 2 V, IC = 0.8 A IC = 500 mA, IB = 50 mA VCE = 2 V, IC = 500 mA VCE = 2 V, IC = 0.5 A VCB = 10 V, IE = 0, f = 1 MHz Weight: 0.82 g (typ.) Min ― ― 40 70 13 ― ― 50 ― Typ. ― ― ― ― 60 0.25 0.90 100 10 Max 1.0 1.0 ― 240 ― 0.8 1.1 ― ― Unit µA µA V V V MHz pF Note: hFE (1) classification O: 70 to 140, Y: 120 to 240 1 2004-07-07 2SC3419 Marking Lot No. Characteristics indicator C3419 A line indicates lead (Pb)-free package or lead (Pb)-free finish. Part No. (or abbreviation code) 2 2004-07-07 2SC3419 IC – VCE 1000 1000 Common emitter Tc = 25°C hFE – IC Common emitter 500 VCE = 2 V (mA) hFE 800 20 12 10 8 600 6 300 Tc = 100°C 25 100 50 30 −25 Collector current IC 400 4 200 IB = 2 mA 10 0 3 10 30 100 300 1000 0 0 DC current gain 1 2 3 4 5 6 Collector current IC (mA) Collector-emitter voltage VCE (V) VCE (sat) – IC 1.0 1000 Common emitter 0.5 0.3 IC/IB = 10 800 Common emitter VCE = 2 V IC – VBE Collector-emitter saturation voltage VCE (sat) (V) Collector current IC (mA) Tc = 100°C 0.1 0.05 0.03 −25 0.01 3 10 30 600 400 25 Tc = 100°C 25 −25 200 100 300 1000 0 0 0.2 0.4 0.6 0.8 1.0 1.2 Collector current IC (mA) Base-emitter voltage VBE (V) PC – Ta 8 3000 (1) Tc = Ta Infinite heat sink (2) No heat sink Safe Operating Area IC max (pulsed)* 1 ms* 100 ms* 10 ms* (W) 6 (1) (mA) PC 1000 500 300 IC max (continuous)* Collector power dissipation Collector current IC 4 DC operation Ta = 25°C DC operation Tc = 25°C 100 50 2 (2) 0 0 40 80 120 160 200 20 0.3 *: Single nonrepetitive pulse Tc = 25°C Curves must be derated linearly with increase in temperature. 1 3 10 VCEO max 30 100 Ambient temperature Ta (°C) Collector-emitter voltage VCE (V) 3 2004-07-07 2SC3419 RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 030619EAA • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 4 2004-07-07