2SC3423

2SC3423 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) 2SC3423 Audio Frequency Amplifier Applications Unit: mm • • • Complementary to 2SA1360 Small collector output capacitance: Cob = 1.8 pF (typ.) High transition frequency: fT = 200 MHz (typ.) Absolute Maximum Ratings (Tc = 25°C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range Ta = 25°C Tc = 25°C Symbol VCBO VCEO VEBO IC IB PC Tj Tstg Rating 150 150 5 50 5 1.2 5 150 −55 to 150 Unit V V V mA mA W °C °C JEDEC JEITA ― ― TOSHIBA 2-8H1A Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in Weight: 0.82 g (typ.) temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-09 2SC3423 Electrical Characteristics (Tc = 25°C) Characteristics Collector cut-off current Emitter cut-off current DC current gain Collector-emitter saturation voltage Base-emitter voltage Transition frequency Collector output capacitance Symbol ICBO IEBO hFE (Note) VCE (sat) VBE fT Cob Test Condition VCB = 150 V, IE = 0 VEB = 5 V, IC = 0 VCE = 5 V, IC = 10 mA IC = 10 mA, IB = 1 mA VCE = 5 V, IC = 10 mA VCE = 5 V, IC = 10 mA VCB = 10 V, IE = 0, f = 1 MHz Min ― ― 80 ― ― ― ― Typ. ― ― ― ― ― 200 1.8 Max 0.1 0.1 240 1.0 0.8 ― ― V V MHz pF Unit μA μA Note: hFE classification O: 80 to 160, Y: 120 to 240 Marking Lot No. Characteristics indicator C3423 A line indicates lead (Pb)-free package or lead (Pb)-free finish. Part No. (or abbreviation code) 2 2006-11-09 2SC3423 IC – VCE 56 0.5 VCE (sat) – IC Collector-emitter saturation voltage VCE (sat) (V) Common emitter 0.3 0.5 48 0.4 Tc = 25°C (mA) 40 0.3 32 24 16 8 0 0 0.2 Collector current IC 0.1 Tc = 100°C 25 0.05 0.03 −25 IB = 0.1 mA 0.001 Common emitter IC/IB = 10 0.5 1 3 5 10 30 50 2 4 6 8 10 12 14 16 0.005 0.3 Collector-emitter voltage VCE (V) Collector current IC (mA) IC – VBE 56 Common emitter 1000 Common emitter VCE = 5 V Tc = 25°C fT – IC Transition frequency fT (MHz) 48 500 300 (mA) 40 32 24 16 8 0 0 Tc = 100°C VCE = 10 V Collector current IC 25 −25 5 100 50 30 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 10 0.5 1 3 10 30 100 Base-emitter voltage VBE (V) Collector current IC (mA) hFE – IC 1000 Cob – VCB Collector output capacitance Cob (pF) Common emitter 50 30 IE = 0 f = 1 MHz Tc = 25°C 10 5 3 VCE = 5 V 500 DC current gain hFE 300 Tc = 100°C 25 100 −25 50 30 1 0.5 0.5 10 0.3 0.5 1 3 5 10 30 50 1 3 10 30 100 Collector current IC (mA) Collector-base voltage VCB (V) 3 2006-11-09 2SC3423 PC – Ta 6 (W) 5 (1) (1) Tc = Ta Infinite heat sink (2) No heat sink Collector power dissipation PC 4 3 2 (2) 1 0 0 20 40 60 80 100 120 140 160 180 Ambient temperature Ta (°C) 4 2006-11-09 2SC3423 RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 20070701-EN • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-09