2SC4544

2SC4544 TOSHIBA Transistor Silicon NPN Triple Diffuse Type (PCT Process) 2SC4544 High-Voltage Switching and Amplifier Applications Color TV Horizontal Driver Applications Color TV Chroma Output Applications Unit: mm • • • High voltage: V (BR) CEO = 300 V Small collector output capacitance: Cob = 3.0 pF (typ.) Collector metal (fin) is fully covered with mold resin. Absolute Maximum Ratings (Tc = 25°C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range Ta = 25°C Tc = 25°C Symbol VCBO VCEO VEBO IC IB PC Tj Tstg Rating 300 300 7 100 50 2 8 150 −55 to 150 Unit V V V mA mA W °C °C JEDEC JEITA TOSHIBA ― SC-67 2-10R1A Weight: 1.7 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-10 2SC4544 Electrical Characteristics (Tc = 25°C) Characteristics Collector cut-off current Emitter cut-off current DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage Transition frequency Collector output capacitance Symbol ICBO IEBO hFE (1) hFE (2) VCE (sat) VBE (sat) fT Cob Test Condition VCB = 240 V, IE = 0 VEB = 7 V, IC = 0 VCE = 10 V, IC = 4 mA VCE = 10 V, IC = 20 mA IC = 10 mA, IB = 1 mA IC = 10 mA, IB = 1 mA VCE = 10 V, IC = 20 mA VCB = 20 V, IE = 0, f = 1 MHz Min ― ― 20 30 ― ― 50 ― Typ. ― ― ― ― ― ― 70 3.0 Max 1.0 1.0 ― 200 1.0 1.0 ― ― V V MHz pF Unit μA μA Marking C4544 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-10 2SC4544 IC – VCE 120 Common emitter Tc = 25°C 4 3 2 500 300 hFE – IC Common emitter Tc = 25°C 100 DC current gain hFE 6 (mA) Collector current IC 80 1 60 0.6 100 50 30 VCE = 20 V 5 10 40 0.4 IB = 0.2 mA 10 0.3 1 3 10 30 100 20 Collector current IC 0 0 4 8 12 16 20 24 (mA) Collector-emitter voltage VCE (V) hFE – IC 500 300 5 VCE (sat) – IC Collector-emitter saturation voltage VCE (sat) (V) Common emitter VCE = 10 V 3 Common emitter Tc = 25°C DC current gain hFE 100 50 30 Tc = 100°C 1 0.5 0.3 IC/IB = 10 0.1 0.05 0.3 5 2 1 3 10 30 100 −25 25 10 0.3 1 3 10 30 100 Collector current IC (mA) Collector current IC (mA) VCE (sat) – IC 5 Collector-emitter saturation voltage VCE (sat) (V) 3 Common emitter IC/IB = 5 VBE (sat) – IC 5 Base-emitter saturation voltage VBE (sat) (V) 3 1 0.5 0.3 Tc = 100°C 0.1 −25 0.05 0.3 1 3 25 10 30 100 Common emitter IC/IB = 5 Tc = 25°C 1 0.5 0.3 0.1 0.3 1 3 10 30 100 Collector current IC (mA) Collector current IC (mA) 3 2006-11-10 2SC4544 IC – VBE Transition frequency fT (MHz) 100 Common emitter VCE = 10 V 500 300 fT – IC Common emitter Tc = 25°C (mA) 80 100 50 VCE = 20 V Collector current IC 60 Tc = 100°C 40 25 −25 5 30 10 20 10 0.3 1 3 10 30 100 Collector current IC 0 0.2 0.4 0.6 0.8 1.0 1.2 (mA) Base-emitter voltage VBE (V) Cob – VCB 50 300 IE = 0 f = 1 MHz Tc = 25°C Safe Operating Area IC max (pulsed)* IC max (continuous) 300 μs* 1 ms* 10 ms* 100 ms* DC operation Tc = 25°C 10 5 *: Single nonrepetitive pulse Tc = 25°C Curves must be derated linearly with increase in temperature. 10 30 Collector output capacitance Cob (pF) 30 10 5 3 (mA) Collector current IC 100 50 30 500 ms* 1 1 3 10 30 100 300 Collector-base voltage VCB (V) VCEO max 100 300 2 3 Collector-emitter voltage VCE (V) PC – Ta (1) Tc = Ta Infinite heat sink (2) No heat sink (1) (W) Collector power dissipation PC 10 5 (2) 0 0 50 100 150 Ambient temperature Ta (°C) 4 2006-11-10 2SC4544 RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 20070701-EN • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-10