2SC5154_04

2SC5154 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT process) 2SC5154 Power Amplifier Applications Driver Stage Amplifier Applications Unit: mm • High transition frequency: fT = 100 MHz (typ.) Maximum Ratings (Ta = 25°C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range DC Pulse Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Rating 160 160 5 1.5 3.0 0.15 1.3 150 −50 to 150 Unit V V V A A W °C °C JEDEC JEITA TOSHIBA ― ― 2-8M1A Electrical Characteristics (Ta = 25°C) Characteristics Collector cut-off current Emitter cut-off current Collector-emitter breakdown voltage DC current gain Collector-emitter saturation voltage Base-emitter voltage Transition frequency Collector output capacitance Symbol ICBO IEBO V (BR) CEO hFE (Note) VCE (sat) VBE fT Cob Test Condition VCB = 160 V, IE = 0 VEB = 5 V, IC = 0 IC = 10 mA, IB = 0 VCE = 5 V, IC = 100 mA IC = 500 mA, IB = 50 mA VCE = 5 V, IC = 500 mA VCE = 10 V, IC = 100 mA VCB = 10 V, IC = 0, f = 1 MHz Weight: 0.55 g (typ.) Min ― ― 160 70 ― ― ― ― Typ. ― ― ― ― ― 0.75 100 25 Max 1.0 1.0 ― 240 1.0 0.95 ― ― V V MHz pF Unit µA µA V Note: hFE classification O: 70 to 140, Y: 120 to 240 Marking C5154 Part No. (or abbreviation code) Lot No. Characteristics indicator A line indicates lead (Pb)-free package or lead (Pb)-free finish. 1 2004-07-07 2SC5154 IC – VCE 1.2 Common emitter 1.0 20 12 8 6 Ta = 25°C 500 hFE – IC hFE 300 Ta = 100°C 25 100 −25 50 30 Common emitter VCE = 5 V IC (A) 0.8 Collector current 0.6 4 0.4 DC current gain IB = 2 mA 10 0.003 0.01 0.03 0.1 0.3 1 0.2 0 2 4 6 8 10 12 14 Collector current IC (A) 0 0 Collector-emitter voltage VCE (V) Collector-emitter saturation voltage VCE (sat) (V) VCE (sat) – IC (MHz) 1 Common emitter 0.5 0.3 25 Ta = 100°C 0.1 0.05 −25 IC/IB = 10 300 Common emitter VCE = 10 V Ta = 25°C fT – IC fT Transition frequency 0.01 0.03 0.1 0.3 1 100 50 30 0.02 0.003 10 −5 −10 −30 −100 −300 −1000 Collector current IC (A) Collector current IC (mA) PC – Ta 1.6 (W) PC Collector power dissipation 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 175 Ambient temperature Ta (°C) 2 2004-07-07 2SC5154 rth – tw 1000 Curves should be applied in thermal limited area. (single nonrepetitive pulse) 300 Ta = 25°C (°C/W) rth Transient thermal resistance 100 30 10 3 1 0.3 0.1 0.001 0.003 0.01 0.03 0.1 0.3 1 3 10 30 100 300 1000 Pulse width tw (s) Safe Operating Area 10 3 IC max (pulsed)* IC max (continuous) 1 ms* 100 ms* 10 ms* 1 IC (A) Collector current 0.3 0.1 DC operation Ta = 25°C 0.03 0.01 *: Single nonrepetitive pulse Ta = 25°C Curves must be derated linearly with increase in temperature. 1 3 10 0.003 VCEO max 30 100 300 0.001 0.3 Collector-emitter voltage VCE (V) 3 2004-07-07 2SC5154 RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 030619EAA • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 4 2004-07-07